Kodak KS100 User Manual

KODAK Solar Charger KS100

Thank you for purchasing the KODAK Solar Charger KS100. Please read these instructions for safe operation.

Features

•

 Charges 2 AA Ni-MH batteries at a time using solar energy or USB Power.

•

 Charges mobile devices (for example, digital cameras, iPods, mobile phones, iPhone/Blackberry) through USB Connection.

•

 Has built-in reverse polarity protection.

Operating Instructions CHARGING THE SOLAR CHARGER

1. Place 2 AA size batteries into the charger so that the + (positive) and – (negative) ends (terminals) of the batteries correspond to the same + and – markings in the charger. NOTE: For best performance, use only KODAK Ni-MH Batteries.

2. Move the switch at the side of the charger to the IN position.

3. Place the charger with its solar panel facing the energy source directly. The charge indicator light is illuminated and battery charging begins.

4. This is a continuous charging charger. The RED light remains ON during charging.

Be careful when removing the batteries immediately after charging. The temperature of batteries can be high.

6. See the speciﬁcation table below for the charge times. CHARGING YOUR DIGITAL DEVICE ON THE GO NOTE: Your solar charger does not have to be fully charged to power your digital device.

Connect your USB device's cable (not included) to the solar charger and your digital device.

2. Move the switch at the side of the charger to the OUT position. The charge indicator light is illuminated and your digital device begins to charge. In most cases, your digital device can be used before it is fully charged.

OPTIONALLY CHARGING THE SOLAR CHARGER VIA USB

2. Move the switch at the side of the charger to the IN position.

3. Connect the USB cable (provided) to the solar charger and the USB power source (for example, a computer or a KODAK USB AC Adapter).

4. This is a continuous charging charger. The RED light remains ON during charging.

5. See the speciﬁcation table below for the USB charge time.

Speciﬁcations: Power Supply

LED Indication:

Operating Temperature 2 AA Ni-MH Batteries Charging time* (hours) Capacity Dimensions (L x W x H) Weight

*Charging time depends on sunlight conditions, length of exposure and device model.

IMPORTANT SAFETY INSTRUCTIONS— Save These Instructions DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.



• The KS100 charges devices with USB-charging capability.

• The use of an accessory attachment that is not recommended by Kodak may cause ﬁre, electric shock or injury.

• If using this product on an aeroplane, observe all instructions from the airline.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

 

• Use a damp cloth to clean the surface. Do not immerse in water.

• Do not insert any objects (such as a screwdriver or metal wires) into the charger.

• Keep out of reach of infants. Children may use the charger only under strict parental supervision.

DANGER! Failure to comply with all of the above warnings may cause electric shock, battery damage/leakage, overheating, explosion or ﬁre and can result in severe personal injury and/or damage to property.

Guarantee: This battery charger and batteries are guaranteed against defects in material and workmanship for one year after

date of purchase. Any device damaged by these batteries due to such defect will be repaired or replaced (at our option) if sent with batteries to Kodak. To Claim: In the U.S. and Canada call toll free, 1-888-375-6325 or 1-800-242-2424, between the hours of 9:00a.m. and 8:00p.m. (EST) Monday through Friday for authorization and mailing address. Send charger or batteries prepaid with your address and phone number, copy of proof of purchase and description of usage. Replacement charger or batteries will be mailed prepaid. No cash refunds will be given. Outside the U.S. and Canada, check with your local Kodak house or go to the following URL for a support number in your area: http://www.kodak.com/include/international.shtml.

Input

Charge current to Batteries Output Switch position In

Red

Out

Green O

0–45°C

CAUTION: Charge only Ni-MH AA rechargeable batteries. Other types of batteries may burst, causing personal injury and damage.

CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualiﬁed service personnel. CAUTION: Do not expose this product to liquid, moisture or extreme temperatures. KODAK AC Adapters and Battery Chargers are intended for indoor use only. The use of controls, adjustments or procedures other than those speciﬁed herein may result in exposure to shock and/or electrical or mechanical hazards.

Waste Electrical and Electronic Equipment/Battery Disposal

In Europe: For human/environmental protection, it is your responsibility to dispose of this equipment and batteries at a collection facility established for this purpose (separate from municipal waste). For more information, contact your retailer, collection facility or appropriate local authorities, or visit www.kodak.com/go/recycle. (Product weight: 66 g.)

USB: 5.0 V DC, 500 mA Solar: 90 mA max. 20-90 mA via Solar or

2.4 V DC, 180 mA via USB USB: 5.0 V DC, 300 mA Status Charging Sucient power for charging your mobile device. Insucient sunlight for charging; insucient power for your mobile device; no batteries in charger.

Via USB Power

113 x 56 x 25 mm

(4.4 x 2.2 x 1.0 in.)

66 g (2.3 oz.)

2100 mA

Via Bright Sunlight

4H6959

Regulatory Information FCC compliance and advisory

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where shielded interface cables have been provided with the product or speciﬁed additional components or accessories elsewhere deﬁned to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Canadian DOC statement DOC Class B compliance—This Class B digital apparatus complies with

Canadian ICES-003. Observation des normes-Class B—Cet appareil numérique de la classe B

est conforme à la norme NMB-003 du Canada.

Made in China for EASTMAN KODAK COMPANY Rochester, New York 14650 U.S.A. © Eastman Kodak Company, 2009. MC/MR/TM: Kodak. 4H6959

www.kodak.com/go/batteries