Kodak ESP 3 User Manual
Start Here
All-in-One Printer
Print
Copy
Scan
Note: A USB 2.0 cable is required to connect your Kodak All-in-One printer to your Windows or Macintosh OS
computer. Available in the Kodak online store or see your local retailer.
1
10
Color Ink Cartridge
Unpack Printer
a) Lift the printer access door and remove all orange shipping tape from the printer.
Ink cartridges
Printer access door
Printhead
Black Ink
10
10
Color Ink Cartridge
Scanner lid
Carriage
Front access door
Color Ink Cartridge
10
Printhead Black and Color
Ink Cartridges
Sample Paper Power Supply
and Adapter
Software CD
2
Insert Printhead
a) Keep the printer access door open
Printhead
b) Remove the printhead from its bag.
IMPORTANT: Insert the printhead immediately
upon opening sealed bag. The printhead is fragile,
handle carefully.
c) Pull on the orange tab to remove the protective
retainer.
2www.kodak.com/go/aiosupport
d) Carefully remove and discard the black plastic
shield and the orange protective cap.
IMPORTANT: Do not touch the copper-colored
contacts.
e) Place the printhead into the carriage. Insert at the
angle shown.
f) Push firmly against the target label of the printhead
until you hear a loud snap.
3 www.kodak.com/go/aiosupport
Loading...