Kodak EASYSHARE Z5120 Extended User Manual

KODAK EASYSHARE

Camera / Z5120

Extended user guide

www.kodak.com

www.kodak.com/go/Z5120support

Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2012

All screen images are simulated.

Kodak, EasyShare, Ektachrome, Kodachrome, Kodacolor, Max, Perfect Touch, Pulse,
T-Max, and Tri-X are trademarks of Eastman Kodak Company.

4H8851_en

Front view

Lens

Strap post

Microphone

Speaker

Product features

www.kodak.com/go/support

i

Product features

Shutter button
Zoom lever

Flash

Focus

Self-timer/Burst

Mode dial
Power lever (On/Off)

Power light

Flash

Record Video

Display
Review

Menu
Delete

Share

OK,

Top, Back View

ii www.kodak.com/go/support

Bottom, side view

LCD

Tripod
socket

Battery compartments

HDMI Out

Slot for SD/SDHC or Eye-Fi Card

Micro USB/ AV Out

www.kodak.com/go/support iii

Table of contents 1

1 Setting up your camera .........................................................................1

Charging the rechargeable batteries..............................................................1

Loading the batteries ....................................................................................2

Storing pictures on an SD/SDHC Card ............................................................3

Turning on the camera ..................................................................................4

Setting the language, date/time.....................................................................5

Attaching the strap ....................................................................................... 6

Purchasing additional components ................................................................6

2 Installing, setting up software ...............................................................7

Installing the Share Button App.....................................................................7

Setting up the Share Button App (one-time setup) .........................................8

After setting up the Share Button App...........................................................8

3 Taking pictures/videos ...........................................................................9

Taking pictures in Smart Capture mode .........................................................9

Changing between Tools view and Clean view............................................. 10

Monitoring the battery level ........................................................................11

Taking a video ............................................................................................ 12

Using other picture-taking modes................................................................ 12

Using the Zoom ..........................................................................................13

Using the Flash button ................................................................................14

Using the Focus button ...............................................................................15

Using the Self-timer/Burst button.................................................................16

Taking burst pictures...................................................................................17

Using Scene modes .....................................................................................18

Taking panoramic pictures...........................................................................19

Turning on the Date Stamp feature..............................................................20

Using Program AE and Manual Exposure modes.......................................... 21

Choosing a Focus/Exposure Zone.................................................................22

iv www.kodak.com/go/support

Table of contents

4 Reviewing pictures, videos ..................................................................23

Reviewing pictures/videos ...........................................................................23

Understanding the review icons................................................................... 24

Playing a video............................................................................................25

Deleting pictures/videos ..............................................................................25

Using the Home feature ..............................................................................27

Magnifying a picture ...................................................................................28

Displaying pictures/videos on a television.....................................................29

Running a slide show..................................................................................30

5 Choosing pictures to share ..................................................................31

Managing email addresses and KODAK PULSE Digital Frames......................32

Customizing your share message.................................................................32

Choosing which social networking sites to display ....................................... 32

6 Tagging faces and keywords ...............................................................33

Tagging people...........................................................................................33

Tagging with keywords ............................................................................... 35

Marking pictures/videos as favorites............................................................35

7 Transferring, sharing pictures ..............................................................36

Transferring pictures/videos using a USB cable.............................................36

8 Editing pictures and videos .................................................................37

Accessing the picture-editing features..........................................................37

Accessing the video-editing features............................................................41

9 Using the Menu button to change camera settings .............................45

Adjusting camera settings ...........................................................................45

10 Printing pictures ................................................................................48

Direct printing.............................................................................................48

Ordering prints online .................................................................................49

Printing from an optional memory card........................................................49

Marking pictures for print............................................................................49

www.kodak.com/go/support

v

Table of contents

11 Using an Eye-Fi Card .........................................................................50

Storing pictures on an Eye-Fi Card...............................................................50

Sharing pictures using an Eye-Fi Card ..........................................................51

Eye-Fi status icons.......................................................................................51

Changing Eye-Fi settings .............................................................................52

Other Eye-Fi Information .............................................................................52

12 Troubleshooting ................................................................................53

Camera problems........................................................................................53

Computer/connectivity problems..................................................................54

Picture quality problems..............................................................................55

Eye-Fi problems...........................................................................................56

Direct printing (PICTBRIDGE enabled printer) problems ................................57

Getting help on the Web.............................................................................58

13 Appendix ...........................................................................................59

Specifications..............................................................................................59

Care and maintenance ................................................................................61

Upgrading your software and firmware........................................................61

Storage capacities.......................................................................................62

Important safety instructions .......................................................................62

Battery replacement, battery life..................................................................63

Limited warranty .........................................................................................64

Regulatory compliance ................................................................................65

vi www.kodak.com/go/support

1 Setting up your camera

Lights are on while the charger is
plugged in. (See the charger
documentation for instructions
and charging times.)

All batteries lose power over time–even if they’re not being
used. For longer life, fully charge KODAK Ni-MH
Rechargeable Batteries AA prior to use.

Your plug may differ.

IMPORTANT! If your package includes:

■ Ni-MH batteries and a charger, continue to Charging the rechargeable batteries.

■ Alkaline batteries (and no charger), skip to Loading the batteries, page 2. (You

may purchase Ni-MH rechargeable AA batteries and a charger at

www.kodak.com/go/accessories.)

Charging the rechargeable batteries

Charging time varies by battery level. For expected battery life, see page 63.

Purchase chargers, extra batteries www.kodak.com/go/accessories

www.kodak.com/go/support 1

Setting up your camera

12

Press the door lock while
sliding open the door.

Loading the batteries

Purchase extra batteries www.kodak.com/go/accessories

Monitor the battery level see page 11

2 www.kodak.com/go/support

Setting up your camera

CAUTION:

Accessory

Storing pictures on an SD/SDHC Card

Your camera has enough internal memory for a couple of practice pictures. We highly
recommend purchasing a Class 4 or higher SD/SDHC Card (up to 32 GB) to
conveniently store more pictures/videos. (Card class is typically shown on the card
and/or packaging.) You must use a Class 4 or higher card to record HD video.

NOTE: Your camera also accepts Eye-Fi Cards, X2 or higher with a firmware version of 4.5174 or higher.

(View and update firmware using the Eye-Fi Center Software that accompanies the card.)

A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card while the camera is on may
damage the pictures, the card, or the camera.

1 Turn off the camera, then open the door.

2 Insert a card until it clicks into place.

To remove a card, press and release it.

IMPORTANT:

When you turn on the camera, it checks to
see if a card is inserted. If pictures/videos
are detected in internal memory, the
camera prompts you to move them to the
card. New pictures/videos are stored on the
card.

Purchase memory cards www.kodak.com/go/accessories

www.kodak.com/go/support

3

Setting up your camera

If the lens cap is attached, remove it.

1

2

Pull back the On/Off switch,
then release it.

Turning on the camera

4 www.kodak.com/go/support

Setting up your camera

Back

OK

Setting the language, date/time

The first time you turn on the camera, you’re prompted to choose your language and
set the date/time.

Choose your language:

1 Press to highlight your language.

2 Press the OK button.

Set the date and time:

1 Press to change the date format, if desired.

2 Press to highlight the year, month, date, hours, or minutes.

NOTE: You may need to scroll down to see all fields.

3 Press to change the value.

4 When finished setting the date and time, press to highlight OK. Then press

the camera OK button.

Change date/time in the future see page 46

www.kodak.com/go/support

5

Setting up your camera

Attaching the strap

Purchasing additional components

(4) KODAK Rechargeable Digital Camera
AA Batteries and Battery Charger

SD/SDHC Card (Class 4 or higher)

KODAK Camera USB Cable Micro B / 5-Pin

Eye-Fi Card www.eye.fi

6 www.kodak.com/go/support

www.kodak.com/go/accessories

2 Installing, setting up software

Before you can share pictures/videos, you must:

■ Install the KODAK Share Button App on your computer

See Installing the Share Button App (below) and

■ Perform a one-time setup of your email and social networking site credentials (user

IDs and passwords). The email addresses and sites that you choose will appear on
your camera when you press the Share button.
See Setting up the Share Button App (one-time setup), page 8

Installing the Share Button App

IMPORTANT:

1 Make sure the computer is connected to the Internet.

2 Turn off the camera.

Until you install and set up the Share Button App, the camera Share button
is not enabled.

3 Using the USB cable, connect the camera to a

computer USB port. Then turn on the camera.

The Camera Setup App runs. (If there are many
pictures on your memory card, this step could take
several minutes.)

4 Watch your computer—when the Camera Setup

App prompts you to install the Share Button App,
click Install Now. (If you are prompted to allow the
Camera Setup App to run, click Allow.)

5 When prompted, click Finish.

If you successfully installed the software

See “Setting up the Share Button App (one-time setup)” on page 8.

www.kodak.com/go/support 7

Installing, setting up software

If software installation does not begin after several minutes

1 Make sure the computer is connected to the Internet.

2 Open My Computer. (For MAC OS, go to the Finder.)

3 Open the KODAK Setup App. (For MAC OS, open the KODAK Camera Setup App.)

If the installation still doesn’t begin

1 Download the Share Button App from www.kodak.com/go/camerasw.

2 After it’s downloaded, double-click to install it.

Setting up the Share Button App (one-time setup)

After you install the Share Button App on your computer and click Finish (see page 7),
he App automatically starts.* It prompts you through a one-time setup of your email
and social networking credentials (user IDs and passwords). The addresses and

sites that you choose appear on your camera when you press the Share
button. If you choose none, none will be listed when you press the Share button.

Did you successfully set up the software?

See “After setting up the Share Button App” on page 8.

* If the App didn't start when you clicked Finish

The camera may have timed out. Unplug the camera from the USB cable and turn it
off. Plug the camera back in and turn it on. When the App starts, perform the
one-time setup, above.

After setting up the Share Button App

Congratulations—you’re ready to share!

■ Take some pictures (see page 9).

■ Choose pictures to share (see page 31).

■ Connect the camera to your computer (see page 36). The Share Button App emails

and/or shares your chosen pictures on your social networking sites.

8 www.kodak.com/go/support

3 Taking pictures/videos

Focus
brackets

• Press halfway.

• Pause for green brackets.

• Continue completely down.

Taking pictures in Smart Capture mode

When you turn on the camera the first time, it’s ready to take pictures in Smart
Capture mode . (After that, it remembers the last mode you used.)

1 Use the LCD to compose the picture

2 Press the Shutter button and pause halfway down.

The camera sets the exposure and focuses in the green brackets. If it’s not focusing on
the desired subject, release the Shutter button and start over.

3 Continue pressing the Shutter button until it’s completely down.

The camera takes a picture, then briefly displays it. The picture is saved unless you press
the Delete button . To dismiss the picture (and get back to taking pictures right
away), press the Shutter button halfway down.

.

www.kodak.com/go/support 9

Taking pictures/videos

Tools view

Tools appear at the top of the LCD.

Clean view

A “clean” look; no tools appear.

to choose a Tool, then press OK.

Press

(Press the Menu button

Press the Display button

Clean view and Tools view.

Tools view + Histogram

Tools appear at the top of the LCD.

to change between

(Turn on the Framing Grid in Settings.)

to change settings.)

Changing between Tools view and Clean view

NOTE: When you change a setting, it remains set even if you turn off the camera. If you need to reset all

settings to their factory default, use Reset All Camera Settings (see page 46).

10 www.kodak.com/go/support

Tool descriptions

Zoom slider

Battery level

Exposure compensation

ISO

White balance

Focus/Exp. zone

Pictures/video time remaining

Eye-Fi Card (accessory, appears
only if inserted)

Color mode

Sharpness

Date stamp

Contrast

Aperture

Shutter speed

Flash compensation

Flash setting

More tools

Taking pictures/videos

Monitoring the battery level

Don’t miss out on great pictures and videos. Keep rechargeable batteries fully charged
and keep a set of spare batteries available.

Full

Three quarters

Half

One Quarter/Critical

www.kodak.com/go/support

11

Taking pictures/videos

Turn the Mode dial.

Note: If you choose SCN (Scene), press

to highlight a Scene

mode, then press OK.

P

M

Taking a video

The camera is always ready to take a video—just press and release the Record Video
button . (Press and release it again to stop.)

Using other picture-taking modes

Capture modes

Smart Capture Landscape

Program AE Panorama Right-to Left,

Left-to-Right

Manual Exposure Scene Modes

Sport Night Portrait

Night Landscape Portrait

12 www.kodak.com/go/support

Taking pictures/videos

Zoom

in

Zoom

out

Pointer

Using the Zoom

Use optical zoom to get closer to your subject before taking a picture or video. (If the
zoom button is pressed

during

video recording, then digital zoom is used.)

1 Use the LCD to frame your subject. (For focus distances, see Specifications,

page 59.)

2 To zoom in, turn the zoom clockwise, aiming the pointer at T (Telephoto “+”). To

zoom out, turn the zoom counter-clockwise, aiming the pointer at W (Wide Angle
“-”).

3 Take the picture or video.
NOTE: To get a focused picture every time, use the Focus brackets (page 9). You cannot zoom in Super

Macro focus mode (page 15).

www.kodak.com/go/support

13

Taking pictures/videos

Press the Flash button to cycle through flash modes.The
current flash mode appears at the bottom of the LCD.

IMPORTANT: Flash modes are
not available in all modes.

Using the Flash button

Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.

Flash modes (vary by picture-taking mode)

Auto Flash Red-eye Preflash

Flash On
(Fill)

Flash Off

14 www.kodak.com/go/support

Using the Focus button

Press the Focus button to cycle through focus
modes. The current focus mode appears at the
bottom of the LCD.

IMPORTANT: Focus modes are not
available in all picture-taking modes,
such as Smart Capture.

Taking pictures/videos

Mode For

Normal AF
(Auto Focus)

Infinity AF

No icon Normal picture taking.

Distant scenery or taking pictures through a window. (Turn off the
flash when taking pictures through glass.)

Macro Close-ups. For focus distances, see page 59.

Extreme close-ups. For focus distances, see page 59.

Super Macro

NOTE: You cannot zoom in Super Macro.

www.kodak.com/go/support

15

Taking pictures/videos

Press the Self-timer/Burst button to cycle through
available modes. The current mode appears at the
bottom of the LCD.

10

2

2x

Using the Self-timer/Burst button

Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.

1 Choose a setting:

10 seconds— A picture is taken after a 10-second delay (so you have

time to get into the scene).
2 seconds— A picture is taken after a 2-second delay (for a steady,

shutter release).
2 shot— The first picture is taken after a 10-second delay. A second

picture is taken 8 seconds later.

2 Compose the scene. Press the Shutter button and pause halfway down

halfway (to focus). Continue pressing the Shutter button until it’s completely
down (to start the self-timer).

The Self-timer light blinks until a picture is taken.

NOTE: Use the same procedure to take a 2- or 10-second self-timer video, but press the Shutter button

completely down. When the self-timer is off, the icon shown is . You can also press the Menu
button (see page 45) to access this setting.

16 www.kodak.com/go/support

Taking pictures/videos

Press the Self-timer/Burst button to cycle through
available modes. The Burst icon appears at the bottom
of the LCD.

Taking burst pictures

While the Shutter button is pressed in Burst mode, take pictures @ approximately 0.8
fps (frames per second) until there is no more storage space.

1 Press the Self-timer/Burst button until the Burst icon appears at the bottom of

the LCD.

2 Compose the scene. Press the Shutter button and pause halfway down

halfway (to focus). Continue pressing the Shutter button until it’s completely
down and hold it to take the pictures.

The camera stops taking pictures when you release the Shutter button or when there is
no more storage space.

NOTE: The flash is disabled in Burst modes. During quickview, you can delete all pictures in the burst series.

Burst is unavailable in Portrait, Night Portrait, Night Landscape, Backlight, Fireworks, and Panorama
modes. You can also press the Menu button (see page 45) to access this setting.

www.kodak.com/go/support

17

Taking pictures/videos

Using Scene modes

Choose a Scene mode before taking a picture.

1 Turn the Mode dial to SCN (Scene modes).

2 Press to choose the desired Scene mode, then press OK.

NOTE: To return to Smart Capture mode, go back to Step 1 and choose Smart Capture.

Scene mode For

Flower Close-ups.

Sunset Subjects at dusk.

Backlight Subjects that are in shadow or “backlit.”

Candlelight Subjects illuminated by candlelight.

Children Action pictures of children in bright light.

Bright Bright beach or snow scenes.

Fireworks Fireworks. For best results, place the camera on a steady surface or tripod.

Self-Portrait Close-ups of yourself. Assures proper focus and minimizes red eye.

Stage People in dark scenes, such as a stage. For best results, place the camera

on a steady surface or tripod.

Photobooth Taking 4 pictures, which the camera combines into 1 strip.

High ISO People indoors, in low-light scenes.

18 www.kodak.com/go/support

Taking pictures/videos

Take 2 or 3
pictures.

Get 1 panoramic
picture.

Taking panoramic pictures

Use panorama to “stitch” up to 3 pictures into 1panoramic scene.
NOTE: Individual pictures are not saved, even if panorama capture is cancelled before stitching occurs.

(Focus and exposure are set with the first picture. The flash is set to Off.)

1 Turn the Mode dial to Panorama .

The default direction for taking panoramic pictures is left to right . To take
pictures from right to left, press , choose , then press OK.

2 Take the first picture.

After a quickview, the LCD displays the Liveview and an “overlay” from the first picture.

3 Compose the second picture. Make the overlay from the first picture cover the

same portion in the new picture.

If you are taking/stitching only 2 pictures, press OK to choose Stitch. After you take 3
pictures, the pictures are automatically stitched.

NOTE: To use the self-timer 10-second or 2-second setting, see page 16.

www.kodak.com/go/support

19

Taking pictures/videos

Turning on the Date Stamp feature

You can turn on Date Stamp so that new pictures are stamped with the date taken.

IMPORTANT:

You can only add a date stamp when the camera is in a picture-taking
mode (not in Review mode when a picture is already taken). When you turn
on Date Stamp, all new pictures that you take are stamped until you turn
off the feature. Once a date stamp is applied, it cannot be removed (unless
you use image editing software).

1 If the toolbar is hidden, press to reveal it.

2 Press to highlight Date Stamp Off , then press OK.

3 Press to highlight Date Stamp On , then press OK.

The Date Stamp On icon appears in the toolbar. The date is stamped on pictures
you take next. The feature stays on until you turn it off.

20 www.kodak.com/go/support

Taking pictures/videos

White Balance

Flash compensation

ISO

More toolsDate Stamp

Exposure Compensation

Aperture

Shutter Speed

Using Program AE and Manual Exposure modes

Use these modes when you want more control over your camera and pictures.

1 Turn the Mode dial to P (Program AE) or M (Manual Exposure) mode.

2 If the toolbar is hidden, press to reveal it.

3 Press to highlight an icon like Exposure Compensation, ISO, White Balance,

etc. Then press OK. (To learn more about the icons, page 10.)

4 Press to highlight a value within that setting, then press OK.
NOTE: Settings that you change in Program AE mode apply only to pictures taken in Program AE mode. Use

Reset Camera (see page 46) to reset all settings to their factory default. To return to Smart Capture
mode, go back to Step 1 and

Mode When to use Press to control

Program AE mode offers the ease of auto exposure

with full access to all manual controls. The camera
automatically sets the shutter speed and aperture
(f-stop) based on the scene lighting.

Manual Exposure mode offers manual exposure
with full access to all menu options. (To prevent blur,
use a tripod for slow shutter speeds.)

choose

Smart Capture.

Exposure compensation (how
much light enters the
camera), flash compensation,
and ISO speed

Aperture, shutter speed, flash
compensation, and ISO speed

Exposure Compensation—adjust the exposure. If the scene is too light, decrease
the setting; if it’s too dark, increase the setting.

ISO—adjust the camera’s sensitivity to light. Higher ISO indicates greater sensitivity.
NOTE: A higher ISO may produce unwanted “noise” in a picture.

www.kodak.com/go/support

21

Taking pictures/videos

Flash Compensation—adjust flash brightness.

Shutter speed—control how long the shutter stays open. (Use a tripod for slow

shutter speeds.)

Aperture—(also known as F-stop) control the size of the lens opening, which
determines the depth of field.

■ Smaller aperture numbers indicate a larger lens opening; good for low-light.

■ Larger aperture numbers indicate a smaller lens opening; keeps the main subject

sharp; good for landscapes and well-lit conditions.

Choosing a Focus/Exposure Zone

Choose the focus/exposure zone best suited to your subjects.

1 If the toolbar is hidden, press to reveal it.

2 In a picture-taking mode, press to highlight

Focus/Exposure Zone , then press OK.

3 Press to highlight a setting:.

Face Priority— The camera gives focus priority to faces.

Multi-zone— The camera evaluates the entire frame, then sets an exposure

based on the average. The camera focuses on the nearest object.

Center— The camera focuses on a small zone in the center of a scene.

4 Press OK.

The camera stays in this focus/exposure zone until you change it.

22 www.kodak.com/go/support

4 Reviewing pictures, videos

Press the Review button .

The most recent picture/video is displayed.

Press to view the previous or next picture.

1

2

Reviewing pictures/videos

■ To play a video, press the OK button.

■ To return to picture-taking mode, press the Shutter button halfway down.

Turning on the camera in Review mode

You can turn on the camera so that it’s in Review mode with the lens retracted.

While the camera is off, press and hold the Review button.

displays the most recent picture. The lens stays retracted.

The camera turns on and

Editing pictures and video

To edit pictures and videos, see page 37.

www.kodak.com/go/support 23

Reviewing pictures, videos

Rewind/Play/Fast-ForwardBattery level

Edit
Print

Back

Mode

Home

Multi-up Tag

Marked for sharing

Understanding the review icons

24 www.kodak.com/go/support

Playing a video

1 Press the Review button .

The most recent picture/video is displayed.

2 Press to find a video.

3 Press OK to play the video.

■ To pause, press OK. (While paused, you can

■ To adjust the volume during playback, press

Reviewing pictures, videos

press for previous/next frame.)

.

To return to picture-taking mode, press the Shutter button halfway down.

Deleting pictures/videos

1 Press the Review button .

The most recent picture/video is displayed.

2 Press to find a picture/video.

3 Press the Delete button , then follow the screen prompts.

To return to picture-taking mode, press the Shutter button halfway down.

www.kodak.com/go/support

25

Reviewing pictures, videos

Deleting multiple pictures/videos

When you delete or copy pictures/videos, you can apply the delete or copy command
to more than one picture.

1 Press the Review button .

The most recent picture/video is displayed.

2 Press the Delete button .

3 Highlight Select Multiple, then press OK.

4 Press to highlight a picture/video, then press OK.

A check mark appears. Press OK a second time to remove a check mark.

5 Highlight Delete, then press OK.

The selected pictures/videos are deleted.

To return to picture-taking mode, press the Shutter button halfway down.

Delete all pictures/videos that have been saved to computer

To save space and stay organized, you can delete from your camera those pictures
that you’ve already sent to your computer. When deleting pictures, choose Delete All
Saved To Computer.

To return to picture-taking mode, press the Shutter button halfway down.

26 www.kodak.com/go/support

Reviewing pictures, videos

The paging bar indicates more choices to the right.

Using the Home feature

When you first press the Review button, you see the most recent picture or video.

For a different view, choose the Home icon and see pictures organized by:

■ Date taken

■ People (only if face tags have been added, see page 33.)

■ Keywords (only if keyword tags have been added, see page 35.)

■ Videos (only if videos have been taken, see page 12.)

1 Press the Review button .

2 If the toolbar is hidden, press to reveal it.

3 Press and to highlight the Home icon , then press OK.

4 Highlight Date, People, Videos, or Keywords, then press OK.

If you chose Date, People, or Keywords, highlight the desired date, person, or keyword,
then press OK. If you chose Videos, thumbnails are displayed.

5 To return to picture-taking mode, press the Shutter button halfway down.

Tip: For best results, make sure the camera date/time is current (see page 46).

www.kodak.com/go/support

27

Reviewing pictures, videos

Zoom

in

Zoom

out

Pointer

Magnifying a picture

You can magnify a picture while in review.

1 Press the Review button .

The most recent picture/video is displayed.

2 To zoom in, turn the zoom clockwise, aiming the pointer at T (Telephoto “+”). To

zoom out, turn the zoom counter-clockwise, aiming the pointer at W (Wide Angle
“-”).

3 While magnifying, you can press to make other portions viewable.

To return to picture-taking mode, press the Shutter button halfway down.

28 www.kodak.com/go/support

Reviewing pictures, videos

AV cable

HDMI cable

Displaying pictures/videos on a television

You can display pictures/videos on a television, computer monitor, or any device
equipped with a composite video or HDMI input. (Cables may be sold separately.) Use
the camera controls to navigate through pictures/videos on the television.

Purchase cables www.kodak.com/go/accessories

www.kodak.com/go/support

29

Reviewing pictures, videos

Running a slide show

Use Slide Show to display your pictures/videos on the LCD.

1 Press the Review button .

The most recent picture/video is displayed.

2 If the toolbar is hidden, press to reveal it.

3 Press and to highlight Slide Show , then press OK.

The slide show starts with the current picture, then shows each picture/video once. To
interrupt the slide show, press any button.

To return to picture-taking mode, press the Shutter button halfway down.

30 www.kodak.com/go/support

5 Choosing pictures to share

Back

Use this procedure if an Eye-Fi Card is not installed. (If an Eye-Fi Card is installed, see

page 51.)

IMPORTANT:

1 Press the Share button.

2 Press to find a picture/video.

3 Press to highlight a sharing destination, then press OK. (Press OK again to

remove a check mark.)

To enable the camera Share button for email and social network sharing,
you must install and set up the KODAK Share Button App. (See page 7.)

4 To share other pictures, repeat steps 2 and 3. When finished, highlight Back, then

press OK.

When you connect the camera to your computer, these pictures are sent to the sharing
destinations you chose.

www.kodak.com/go/support 31

Choosing pictures to share

Managing email addresses and KODAK PULSE
Digital Frames

You can add, edit, or delete email addresses (including those of KODAK PULSE Digital
Frames) on your camera.

1 Press the Share button.

2 Highlight Manage Email Addresses.

3 To add, delete, or edit an email address or frame, highlight Add, Delete, or Edit,

then press OK.

The keyboard appears when you need to type an email address, such as
[e-mail].

4 When finished, highlight one of the following, then press OK:

■ Done, which automatically creates a nickname based on the email address

(like “mjones”) or

■ Next, to type a meaningful nickname that you choose, (like “Mom” or

“Mary”). When finished typing, highlight Done, then press OK.

To return to picture-taking mode, press the Shutter button halfway down.

Customizing your share message

You can personalize the share message that accompanies your shared pictures. See
Share Button Settings on page 45.

Choosing which social networking sites to display

Set up this feature on your computer using the KODAK Share Button App (see

page 8).

32 www.kodak.com/go/support

6 Tagging faces and keywords

Tag pictures to make them easy to find, later (see page 27). You can tag pictures in 2
ways:

■ People, and then find all pictures of “Mary.”

■ Keywords, and then find all pictures from “Nature.”

Tagging people

When you tag faces, you’re helping your camera to recognize people by name. Then it

and

matches names and faces in pictures you’ve taken—

1 Press the Review button .

The most recent picture/video is displayed.

2 If the toolbar is hidden, press to reveal it.

those you take in the future!

3 Press and to highlight Tags , then press OK.

4 Highlight Tag People, then press OK.

If faces are detected, names or question marks appear under them. To resolve an
incorrect name or a question mark, press to highlight a face, then press OK.
Highlight a name or highlight Enter New Name, then press OK.

5 If prompted to Update People Tags, highlight Yes, then press OK.

Other pictures are scanned and updated with the name(s) you applied here.
Press to add names to other pictures. Press OK.

www.kodak.com/go/support 33

Tagging faces and keywords

Manually add a face tag

If a face is not detected, you can identify and name it.

1 Press the Review button .

The most recent picture/video is displayed.

2 Press to find a picture.

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Tags , then press OK.

5 Highlight Tag People, then press OK.

If no faces are detected, the Manual Tag menu appears. (If faces were detected,
highlight Manual Tag, then press OK.)

6 Follow the prompts to enter a new name, or choose one from the list.

7 When finished typing, highlight Done, then press OK.

Need to update a name?

1 Press the Review button .

The most recent picture/video is displayed.

2 If the toolbar is hidden, press to reveal it.

3 Press and to highlight Tags , then press OK.

4 Highlight Tag People, then press OK.

5 Highlight Edit Names, then highlight a name to modify, then press OK.

6 When finished typing, highlight Done, then press OK.

NOTE: You can have up to 20 names.

34 www.kodak.com/go/support

Tagging faces and keywords

Tagging with keywords

Tag pictures to make them easy to find, later.

1 Press the Review button .

The most recent picture/video is displayed.

2 If the toolbar is hidden, press to reveal it.

3 Press and to highlight Tags , then press OK.

4 Highlight Keyword Tag, then press OK.

5 Highlight a tag (or choose “+” to add a new keyword).

6 Highlight Done, then press OK.

Marking pictures/videos as favorites

Mark pictures as favorites to make them easy to find, later.

1 Press the Review button .

The most recent picture/video is displayed.

2 If the toolbar is hidden, press to reveal it.

3 Press and to highlight Tags , then press OK.

4 Highlight Keyword Tag, then press OK.

5 Highlight Favorite, then press OK.

www.kodak.com/go/support

35

7 Transferring, sharing pictures

When you transfer pictures/videos to your computer, any that you tagged for emailing
or sharing on social networking sites are emailed or shared. (See more about tagging
pictures on page 33.)

You can transfer in 2 ways:

■ Using the included USB cable (see below)

■ Using an optional Eye-Fi Card (see page 52)

Transferring pictures/videos using a USB cable

IMPORTANT:

1 Turn off the camera.

2 Using the KODAK Camera USB cable, connect the camera to a computer USB port.

(Use only the cable included with this camera.)

To enable the camera Share button for email and social network sharing,
you must install and set up the KODAK Share Button App. (See page 7.)

3 Turn on the camera.

4 Follow the computer prompts to transfer

pictures/videos to your computer.

Pictures/videos that you tag for sharing are emailed or
uploaded to social networking sites. (See more about
tagging pictures on page 33.)

36 www.kodak.com/go/support

8 Editing pictures and videos

Accessing the picture-editing features

When you’re reviewing a picture and choose Edit, you get picture-editing tools:

1 Press the Review button .

2 Press to find a picture.

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight:

■ Effects (see page 38)

■ Crop (see page 39)

■ PERFECT TOUCH Technology (see page 40)

6 Press OK.
NOTE: When you’re reviewing a video and choose Edit, you get video-editing tools (see page 41).

www.kodak.com/go/support 37

Editing pictures and videos

Applying Effects

Using Creative effects

You can apply borders to or change the color tint of pictures.

1 Press the Review button .

2 Press to find a picture.

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight Effects , then press OK.

6 Press to highlight Borders or Tint, then press OK.

7 Choose a border style or color tint to apply to the picture. Follow the prompts to

save the picture.

To return to picture-taking mode, press the Shutter button halfway down.

Using Film effects

You can apply unique film effects to pictures.

1 Press the Review button .

2 Press to find a picture.

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight Effects , then press OK.

6 Press to highlight Film Effects, then press OK.

7 Choose Ektachrome, Kodachrome, Kodacolor, Sepia, T-Max, or Tri-X.

Examples of each are displayed.

8 Follow the prompts to save the picture.

38 www.kodak.com/go/support

Editing pictures and videos

Crop box

Cropping a picture

You can crop a picture so that only the desired portion of the picture remains.

1 Press the Review button .

2 Press to find a picture.

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight Crop , then press OK.

6 Press and to move the crop box to the desired portion of the picture.

Turn the zoom switch to resize the crop box.

7 When finished, Press OK, then follow the screen prompts.

Cropped pictures cannot be cropped again on the camera.

To return to picture-taking mode, press the Shutter button halfway down.

www.kodak.com/go/support

39

Editing pictures and videos

Applying KODAK PERFECT TOUCH Technology

KODAK PERFECT TOUCH Technology helps ensure better, brighter pictures. PERFECT
TOUCH Technology is automatically applied to pictures taken in Smart Capture mode.

NOTE: (You cannot apply PERFECT TOUCH Technology to videos, panoramic pictures, or pictures to which

PERFECT TOUCH Technology is already applied.)

1 Press the Review button .

2 Press to find a picture.

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight PERFECT TOUCH Tech , then press OK.

The enhanced picture is previewed next to the original. Press to pan and compare
the pictures.

6 Press OK, then follow the prompts to replace the original picture or save the

enhanced picture as a new one.

To return to picture-taking mode, press the Shutter button halfway down.

40 www.kodak.com/go/support

Editing pictures and videos

Accessing the video-editing features

When you’re reviewing a video and choose Edit, you get video-editing tools:

1 Press the Review button .

2 Press to find a video. (You can also choose Home, Videos, then find a video.)

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight:

■ Trim (see page 42)

■ Make Picture (see page 43)

■ Action Print (see page 44)

6 Press OK.
NOTE: When you’re reviewing a picture and choose Edit, you get picture-editing tools (see page 37).

www.kodak.com/go/support

41

Editing pictures and videos

EndStart

Trimming a video

You can remove the start or end from a video, saving only the desired portion.
NOTE: This feature is also available during video playback.

1 Press the Review button .

2 Press to find a video. (You can also choose Home, Videos, then find a video.)

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight Trim , then press OK.

6 Press OK to highlight the Start Trim mark . Press to move it to its new

location. When it’s in position, press OK to lock it in place.

Press to highlight the End Trim mark . Press to move it to its new
location. When it’s in position, press OK to lock it in place.

7 Press and to highlight Done, then press OK.

Follow the prompts to Save as New, Cancel, or Replace Original.

To return to picture-taking mode, press the Shutter button halfway down.

42 www.kodak.com/go/support

Editing pictures and videos

Making a picture from a video

You can choose a single frame from a video, then make it into a picture.
NOTE: Picture quality depends on video resolution. This feature is also available during video playback.

1 Press the Review button .

2 Press to find a video. (You can also choose Home, Videos, then find a video.)

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight Make Picture , then press OK.

6 Press OK to play the video. When you reach the desired frame, press OK to Pause.

NOTE: While the video is paused, you can press to move one frame at a time.

7 Press and to highlight to highlight Make Picture, then press OK.

The picture is created. (The original video is saved.)

To return to picture-taking mode, press the Shutter button halfway down.

www.kodak.com/go/support

43

Editing pictures and videos

Making an action print from a video

From a video, you can make a 9-up picture. The camera chooses the first, last, and
seven equally spaced frames from the video.

NOTE: Picture quality depends on video resolution. This feature is also available during video playback.

1 Press the Review button .

2 Press to find a video. (You can also choose Home, Videos, then find a video.)

3 If the toolbar is hidden, press to reveal it.

4 Press and to highlight Edit , then press OK.

5 Press to highlight Action Print , then press OK.

A 9-up picture is created using the first, last, and 7 equally spaced frames.

To return to picture-taking mode, press the Shutter button halfway down.

44 www.kodak.com/go/support

9 Using the Menu button to

change camera settings

Adjusting camera settings

You can adjust settings to get the best results from your camera.
NOTE: Some modes offer limited settings. Some settings remain until you change them; others, until you

change modes or turn off the camera. You can also use the Toolbar to access many of these settings
(see page 10).

1 In picture-taking mode, press the Menu button .

2 Press to highlight a setting, then press OK.

3 Highlight an option within that setting, then press OK.

4 To return to picture-taking mode, press the Shutter button halfway down.

Picture or Video Size

Choose a picture or video resolution.

Language Choose your language.

People Tag Settings

Maintain names and faces.

Capture Framing Grid On

See Specifications, starting on page 59.

NOTE: If your card has little space remaining, but you need

to take pictures or videos, you can reduce the Picture
or Video Size. This lets you take a greater number of
pictures or videos, although they will be captured at a
lower resolution.

Update People Tags—Matches recently tagged
people with other pictures that may include these
people.

Modify Names List—Edit or delete existing names.

Off

www.kodak.com/go/support 45

Using the Menu button to change camera settings

Slide Show Settings Choose settings for transitions, looping, and interval.

AF Control (Still)

Choose an auto-focus setting.
Available in Program AE, Panorama,

and Scene modes.

LCD Brightness

Choose LCD brightness during
picture/video capture. (During Review,
the LCD is set to High Power.)

Sound Volume

Choose volume.

Continuous AF—Because the camera is always
focusing, there is no need to press the Shutter button
halfway down to focus.

Single AF—Focuses when the Shutter button is
pressed halfway down. (This setting uses less battery
power.)

High Power—Brighter LCD; uses more battery
power.

Power Save—Dimmer LCD; uses less power.
Auto—LCD brightness is automatically adjusted

according to the environment.

High
Medium
Low
Mute

Date & Time Set date and time.

Video Out

Choose the regional setting that lets
you connect the camera to a television

NTSC—Used in North America and Japan; most
common format.

PAL—Used in Europe and China.

or other external device.

Play Camera Demo

Play a demo of the main camera
features.

Reset All Camera Settings Reset all settings to their factory default.

46 www.kodak.com/go/support

Using the Menu button to change camera settings

CAUTION:

Computer Connection

Choose which application is
downloaded or started when you
connect the camera to the computer.

Safe Mode

In Safe mode, pictures/videos cannot
be deleted or modified.

Format

Formatting deletes all
pictures/videos. Removing a card
during formatting may damage

KODAK Software
Other Application (APPLE iPHOTO, etc.)

IMPORTANT:

To enable the camera Share button
for email and social network sharing, you must
install and set up the KODAK Share Button App.
(See page 7.)

On
Off

Memory Card—Deletes everything on the card;

formats the card.

Cancel—Exits without making a change.
Internal Memory—Deletes everything in internal

memory including email addresses and keyword tags;
formats the internal memory.

the card.

KODAK Camera Software View the URL to download KODAK Software.

Eye-Fi

Turn the Eye-Fi Card on or off. Applies
only if an Eye-Fi Card is inserted.

About View camera information.

On
Off

www.kodak.com/go/support

47

10 Printing pictures

Direct printing

You need a camera, a PICTBRIDGE enabled Printer, and a USB cable.

IMPORTANT:

To print using PICTBRIDGE Technology, you must change the Computer
Connection setting (in the Settings menu) to Other Application (see

page 47).

Connecting the camera to a printer

1 Turn off the camera.

2 Use the USB cable (included with the camera) to connect the camera to the printer.

Printing

1 Turn on the printer. Turn on the camera.

The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu turns off, press any button to
redisplay it.

2 Highlight a printing option, then press OK.

Current Picture—Press to choose a picture.

Tagged Pictures—If your printer is capable, print pictures marked for printing

(see page 49).

Index Print—Print thumbnails of all pictures.

All Pictures—Print all pictures in internal memory or on a card.

NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer

pictures to your computer, see page 36.

Purchase cables, accessories www.kodak.com/go/accessories

48 www.kodak.com/go/support

Printing pictures

Ordering prints online

KODAK Gallery (www.kodakgallery.com) makes it easy to:

■ Upload your pictures.

■ Edit, enhance, and add borders to your pictures.

■ Store pictures, and share them with family and friends.

■ Have prints, photo greeting cards, frames, and albums delivered to your door.

Printing from an optional memory card

■ Automatically print tagged pictures when you insert your card into a printer. See

your printer user’s guide for details.

■ Make prints at a KODAK Picture Kiosk. Go to www.kodak.com/go/picturemaker.

■ Take the card to your local photo retailer for professional printing.

Marking pictures for print

1 Press the Review button .

The most recent picture/video is displayed.

2 Press to find a picture.

3 Highlight Print, then press OK.

4 Press to choose the number of copies, then press OK.

The pictures are printed when you transfer them to your computer. (See page 36.)

www.kodak.com/go/support

49

11 Using an Eye-Fi Card

CAUTION:

This chapter pertains only if you’re using an Eye-Fi Card.

An Eye-Fi Card stores pictures just like an SD/SDHC Card does. It also has a built-in
Wi-Fi antenna that uses your Wi-Fi network to transfer pictures from your camera to
your computer or mobile device.

IMPORTANT:

Choose an Eye-Fi X2 Card or higher with a firmware version of 4.5174 or
higher. (View and update firmware using the Eye-Fi Center Software that
accompanies the card.)

Storing pictures on an Eye-Fi Card

To set up and use the Eye-Fi Card and Eye-Fi Center Software, follow the
documentation that accompanies the card. For further Eye-Fi support, see page 51.

If you’re using an Eye-Fi Card in this camera, it’s critical that you
disable (do not turn on) Endless Memory Mode in Eye-Fi Center
Software.

1 Turn off the camera, then open the door.

2 Insert a card until it clicks into place.

To remove a card, press and release it.

NOTE: When you turn on the camera, it checks to see if a card is inserted. If pictures/videos are detected in

internal memory, the camera prompts you to move them to the card. New pictures/videos are stored
on the card.

Purchase Eye-Fi cards www.eye.fi

Get support for Eye-Fi Cards and Software support.eye.fi

50 www.kodak.com/go/support

Using an Eye-Fi Card

Sharing pictures using an Eye-Fi Card

You can transfer pictures from your camera to a computer or mobile device and share
pictures to social networking sites.

1 Press the Share button.

2 At the “Share via Eye-Fi?” prompt, highlight Yes, then press OK.

IMPORTANT:

For the best reception when transferring pictures to a computer or mobile
device, the rear (LCD side) of the camera should face the Wi-Fi access point.

3 When you’re in range of your known Wi-Fi network or mobile device, turn on the

camera to transfer and share pictures.

Pictures are transferred to your computer and shared to your social networking sites
according to your Eye-Fi Settings.

Eye-Fi status icons

IMPORTANT:

Icon Meaning

Eye-Fi is idle, set to On in the Eye-Fi settings menu, and not currently transferring.

Eye-Fi is on the network and transferring pictures.

IMPORTANT:

The camera must be turned on to transfer and share pictures.

Do not turn off the camera while the Eye-Fi Card is transferring
pictures.

Error (see page 56)

Eye-Fi is off.

Get support for Eye-Fi Cards and Software support.eye.fi

www.kodak.com/go/support

51

Using an Eye-Fi Card

Changing Eye-Fi settings

1 In a picture-taking mode, press the Menu button .

The Settings menu appears.

2 Press to highlight Eye-Fi, then press the OK button.

3 Choose Selective Share (recommended).

When you’re in range of your known Wi-Fi network, turn on the camera to transfer
pictures to your computer or mobile device.

Other Eye-Fi Information

■ It’s critical that you disable (do not turn on) Endless Memory Mode in

Eye-Fi Center Software.

■ As of December 2010, Eye-Fi Cards are certified for use in the countries and

regions in which they were purchased.

■ The Eye-Fi Card has a wireless LAN function. Do not insert the Eye-Fi Card where

Wi-Fi is prohibited, such as while aboard an airplane or in a hospital.

■ Even when you set Eye-Fi to off, the card may transmit radio waves.

■ The card may become warm during use. This is normal.

■ Battery life is reduced when using an Eye-Fi Card.

■ For the best reception when transferring pictures to a computer or mobile device,

the rear (LCD side) of the camera should face the Wi-Fi access point.

For Eye-Fi troubleshooting, see page 56.

Get support for Eye-Fi Cards and Software support.eye.fi

52 www.kodak.com/go/support

12 Troubleshooting

Camera problems

Status Solution

Camera does not
turn on, off; buttons do
not function.

Camera freezes when
a card is inserted or
removed.

LCD is too dark. ■ Adjust the LCD Brightness setting (see page 46).

In Review, a blue or
black screen is
displayed instead of
a picture.

In Review, you do not
see a picture (or the
expected picture) on
the LCD.

■ Charge rechargeable batteries (see page 1); replace

non-rechargeable batteries.

■ Turn the camera off, then back on. Make sure the camera is

turned off before inserting or removing a card.

■ Transfer the picture to the computer (see page 36), then format

the card or internal memory (see page 47).

Caution: Formatting a card deletes all pictures and
videos.

■ Take another picture.

■ Format the card in the camera (see page 47)

Caution: Formatting a card deletes all pictures and
videos.

Flash does not fire. ■ Check the flash setting, and change as needed (see page 14).

Memory card is almost
or entirely full.

The Reset All Camera
Settings feature did
not take effect.

■ Transfer the pictures to the computer (see page 36).

■ Delete pictures from the card (see page 25) or insert a new card.

■ After using the Reset All Camera Settings feature (see page 46),

www.kodak.com/go/support 53

NOTE: The flash does not fire in all modes.

turn the camera off and then on again.

Troubleshooting

Status Solution

Battery life is short. ■ Charge rechargeable batteries (see page 1); replace

non-rechargeable batteries.

■ Use a power-saving LCD Brightness setting (see page 46).

Shutter button does
not work.

Zoom does not always
work.

Memory card not
recognized.

Pictures on card (or in
internal memory) are
corrupted.

■ Make sure the camera is on (see page 4).

■ Transfer pictures to the computer (see page 36), delete pictures

from the camera (see page 25), or insert a card with available
memory (see page 3).

■ You cannot zoom in Super Macro focus mode (see page 15).

■ Card may be corrupted. Format the card in the camera (see

page 47).

Caution: Formatting a card deletes all pictures and
videos.

■ Use another memory card.

■ Retake pictures.

■ Do not remove card while the camera is on.

■ Keep the rechargeable batteries charged.

■ Transfer pictures to the computer (see page 36), then format the

card or internal memory (see page 47).

Computer/connectivity problems

Status Solution

The software installer
does not start.

54 www.kodak.com/go/support

■ Choose and install the right version for your computer at

Caution: Formatting a card deletes all pictures and
videos.

www.kodak.com/go/camerasw.

Status Solution

Troubleshooting

Slide Show does not
run on an external
video device.

■ Adjust the camera Video Out setting to NTSC or PAL (see

page 46).

■ Make sure the external device settings are correct. (See the

device’s user guide.)

Computer does not
communicate with
the camera.

■ Turn off the camera, then turn it back on.

■ Make sure the batteries are charged and installed correctly (see

page 2).

■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is

connected to the camera and the computer (see page 36). Then
turn on the camera.

Picture quality problems

Status Solution

Picture is not clear. ■ To automatically set exposure and focus, press the Shutter button

halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.

■ Clean the lens (see page 61).

■ Place the camera on a flat, steady surface or use a tripod (especially

in high-zoom settings or in low light).

■ Use a larger picture size (see page 45).

■ If you’re manually adjusting the ISO speed, realize that high a ISO

setting may cause grainy pictures.

www.kodak.com/go/support

55

Troubleshooting

Status Solution

Picture is too dark. ■ Reposition the camera for more available light.

■ Use Fill flash (see page 14) or change your position so light is not

behind the subject.

■ Move so that the distance between you and the subject is within the

effective flash range. (See Specifications, starting on page 59.)

■ To automatically set exposure and focus, press the Shutter button

halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.

■ In Program AE mode, adjust the Exposure Compensation (see

page 21).

Picture is too light. ■ Reposition the camera to reduce the amount of available light.

■ Turn the flash off (see page 14).

■ Move so that the distance between you and the subject is within the

effective flash range. (See Specifications, starting on page 59.)

■ To automatically set exposure and focus, press the Shutter button

halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.

■ In Program AE mode, adjust the Exposure Compensation (see

page 21).

Eye-Fi problems

Status Solution

Get support for Eye-Fi
Cards and Software.

Eye-Fi Card is not
working in this
camera.

Go to support.eye.fi

■ Choose an Eye-Fi X2 Card or higher with a firmware version of

4.5174 or higher. (View and update firmware using the Eye-Fi
Center Software that accompanies the card.)

■ The camera must be turned on to transfer pictures to the

computer or mobile device.

56 www.kodak.com/go/support

CAUTION:

Status Solution

Eye-Fi Endless Memory
is not working.

If you’re using an Eye-Fi Card in this camera,
it’s critical that you disable (don’t turn on)
Endless Memory Mode in Eye-Fi Center
Software.

Eye-Fi Card gets warm. ■ This is normal.

Troubleshooting

Camera battery life is
shorter.

Transferring pictures is
slow using the Eye-Fi
Card.

■ Battery life is reduced when using an Eye-Fi Card.

■ For the best reception when transferring pictures to a computer

or mobile device, the rear (LCD side) of the camera should face
the Wi-Fi access point.

Direct printing (PICTBRIDGE enabled printer)
problems

Status Solution

Cannot find the
desired picture.

The Direct printing
menu interface turns
off.

■ Use the Direct printing menu to change the image storage location.

■ Press any camera button to redisplay the menu.

Cannot print pictures. ■ Make sure there is a connection between the camera and the

printer (see page 48).

■ Make sure the printer and the camera have power.

Camera or printer
displays an error
message.

■ Follow the prompts to resolve the issue.

www.kodak.com/go/support

57

Troubleshooting

Getting help on the Web

Get support for your product (FAQs, troubleshooting
information, etc.).

Purchase camera accessories. www.kodak.com/go/accessories

Download the latest camera firmware. www.kodak.com/go/Z5120downloads

Download the latest software. www.kodak.com/go/camerasw

Register your camera www.kodak.com/go/register

Chat, email, or phone Kodak
(Chat not available in all languages)

Get Eye-Fi support (for Eye-Fi Cards and Software) support.eye.fi

www.kodak.com/go/Z5120support

www.kodak.com/go/contact

58 www.kodak.com/go/support

13 Appendix

Specifications

CCD—1/2.3-type

Effective pixels—16 MP (4624 x 3472)

LCD—3.0 in. (7.6 cm) LCD; 230K dots; 30 fps; 4:3 aspect ratio

Image storage—Optional Class 4 or higher SD/SDHC Card (or Eye-Fi Card

X2 or higher with a firmware version of 4.5174 or higher). The SD logo is a trademark
of the SD Card Association. Maximum supported card size: 32 GB

Internal storage capacity—64 MB internal memory (28 MB available for image
storage. 1 MB equals one million bytes.)

Taking lens—26X optical zoom; f/3.2–f/5.6; 35 mm equivalent: 26–676 mm

Digital zoom—5X continuous

Image Stabilizer—CCD Shift type

Focus system—TTL-AF (through-the-lens auto focus); Multi-Zone, Center-Zone,

Face Priority. Working range:

0.5 m (1.6 ft)–infinity @ wide, normal

2.2 m (7.2 ft)–infinity @ telephoto, normal

0.1–0.6 m (0.3–2 ft) @ wide, Macro mode

2.2–3 m (7.2–9.8 ft) @ telephoto, Macro mode
1–15 cm (0.4–5.9 in.) @ wide, Super Macro mode

Auto focus control—Continuous and Single AF

Face detection—Yes

Face recognition—Yes

Shutter speed—Auto: 1/2–1/2000 seconds; Manual: 16–1/1000 seconds

www.kodak.com/go/support 59

Appendix

Long time exposure—1/2–8 seconds

ISO speed—64, 100, 200, 400, 800, 1600
Focus/Exposure Zone—TTL-AE; Face Priority, Multi-Zone, Center-Zone

Exposure compensation—+/-2.0 EV with 1/3 EV step

White Balance—Auto, Daylight, Tungsten, Fluorescent, Open Shade

Electronic Flash—Auto, Fill, Red Eye, Off; Working range in Smart Capture mode:

0.5–5.5 m (1.6–18 ft) @ wide; 2.2–3.1 m (7.2–10.2 ft) @ telephoto

Self-timer mode—2 seconds, 10 seconds, 2 shot

Burst modes—See page 17.

Capture modes—Smart Capture, Program AE, Manual Exposure, Scene modes (see

page 18), Video

Image file format—

Still: EXIF 2.3 (JPEG compression); file organization DCF
Video: MP4 (Video CODEC H.264; Audio CODEC AAC)

Picture size—16 MP (4:3):

14 MP (3:2):
12 MP (16:9):
6 MP (4:3):
3 MP (4:3):

4608 x 3072 pixels

4608 x 2592 pixels
2880 x 2160 pixels
2048 x 1536 pixels

4608 x 3456 pixels

Video size—HDV (1280 x 720) @ 30 fps

VGA (640 x 480) @ 30 fps

Recording limit —HDV: < 4 GB or < 29 mins; VGA: < 4 GB

Color modes—Viv id Color, Full Color, B asic Colo r, Black & White, Sepia

Sharpness modes—Sharp, Normal, Soft

Communication with computer—USB 2.0 high speed (PIMA 15740 protocol);

via KODAK Camera USB Cable, Micro B / 5-Pin

Microphone—Mono

60 www.kodak.com/go/support

Speaker—Mono

PICTBRIDGE support—Yes

Power—(4) KODAK Rechargeable Digital Camera AA Batteries

Tripod mount—1/4-type

Size—116.4 x 78.8 x 73 mm (4.6 x 3.1 x 2.9 in.) @ power off

Weight—488 g (17.2 oz) with batteries and card

Appendix

Operating temperature—0–40

° C (32–104° F)

Care and maintenance

■ If you suspect water has gotten inside the camera, remove the batteries and card.

Allow all components to air-dry for at least 24 hours before using the camera.

■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,

lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.

■ Service agreements may be available in your country. Contact a dealer of KODAK

Products for more information.

■ For digital camera disposal or recycling information, contact your local authorities.

In the US, go to the Electronics Industry Alliance site at www.eiae.org or go to

www.kodak.com/go/support.

Upgrading your software and firmware

We occasionally update KODAK Software and firmware (the software that runs on the
camera). For instructions on installing the latest version, go to

www.kodak.com/go/Z5120downloads.

www.kodak.com/go/support

61

Appendix

CAUTION:

Storage capacities

The LCD displays the approximate number of pictures (or minutes/seconds of video)
remaining. Actual storage capacity varies depending on subject composition, card
size, and other factors. You may be able to store more or fewer pictures and videos.

Important safety instructions

Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. KODAK Battery
Chargers are intended for indoor use only. The use of controls,
adjustments, or procedures other than those specified herein may result
in exposure to shock and/or electrical or mechanical hazards. If the LCD
breaks, do not touch the glass or liquid. Contact Kodak customer support.

■ The use of an accessory that is not recommended by Kodak may cause fire, electric

shock, or injury. For approved accessories, go to www.kodak/go/accessories.

■ Use only a USB-certified computer equipped with a current-limiting motherboard.

Contact your computer manufacturer if you have questions.

■ If using this product in an airplane, observe all instructions of the airline.

■ When removing the batteries, allow them to cool; they may be hot.

■ Follow all warnings and instructions supplied by the battery manufacturer.

■ Use only batteries approved for this product to avoid risk of explosion.

■ Keep batteries out of the reach of children.

■ Do not allow batteries to touch metal objects, including coins. Otherwise, a battery

may short circuit, discharge energy, become hot, or leak.

■ Do not disassemble, install backward, or expose batteries to liquid, moisture, fire,

or extreme temperature.

■ Remove the batteries when the product is stored for an extended period of time. In

62 www.kodak.com/go/support

Appendix

the unlikely event that battery fluid leaks inside the product, contact Kodak
customer support.

■ In the unlikely event that battery fluid leaks onto your skin, wash immediately with

water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.

■ Go to www.kodak.com/go/reach for information about the presence of substances

included on the candidate list according to article 59(1) of Regulation (EC) No.
1907/2006 (REACH).

■ Dispose of batteries according to local and national regulations. Go to

www.kodak.com/go/kes.

■ Do not charge non-rechargeable batteries.

Battery replacement, battery life

KODAK Rechargeable Digital Camera AA Batteries: 300 pictures per charge. Battery
life per CIPA testing method. (Approximate number of pictures in Smart Capture
mode, using an SD Card.) Actual life may vary based on usage.

Extending battery life

■ Use a power-saving LCD Brightness setting (see page 46).

■ Dirt on the battery contacts can affect battery life. Wipe the contacts with a pencil

eraser before loading the batteries in the camera.

■ Battery performance is reduced at temperatures below 41° F (5° C). When using

your camera in cold weather, carry spare batteries and keep them warm. Do not
discard cold batteries that do not work; when they return to room temperature,
they may be usable.

www.kodak.com/go/support

63

Appendix

Limited warranty

Kodak warrants its digital cameras and accessories (excluding batteries) to be free
from malfunctions and defects in both materials and workmanship for the warranty
period specified on your KODAK Product packaging. Retain the original dated sales
receipt. Proof of purchase date is required with any request for warranty repair.

Limited warranty coverage

Warranty service is only available from within the country where the Products were
originally purchased. You may be required to ship Products, at your expense, to the
authorized service facility for the country where the Products were purchased. Kodak
will repair or replace Products if they fail to function properly during the warranty
period, subject to any conditions and/or limitations stated herein. Warranty service
will include all labor as well as any necessary adjustments and/or replacement parts. If
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the
purchase price paid for the Product provided the Product has been returned to Kodak
along with proof of the purchase price paid. Repair, replacement, or refund of the
purchase price are the sole remedies under the warranty. If replacement parts are
used in making repairs, those parts may be remanufactured, or may contain
remanufactured materials. If it is necessary to replace the entire Product, it may be
replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90
days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodak's control. This warranty
does not apply when failure is due to shipping damage, accident, alteration,
modification, unauthorized service, misuse, abuse, use with incompatible accessories
or attachments, failure to follow Kodak's operation, maintenance or repacking
instructions, failure to use items supplied by Kodak (such as adapters and cables), or
claims made after the duration of this warranty. Kodak makes no other express or
implied warranty for this product. In the event that the exclusion of any implied
warranty is ineffective under the law, the duration of the implied warranty will be the
length of the express warranty period specified on your Kodak product packaging. The

64 www.kodak.com/go/support

Appendix

option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be
responsible for any special, consequential or incidental damages resulting from the
sale, purchase, or use of this product regardless of the cause. Liability for any special,
consequential or incidental damages (including but not limited to loss of revenue or
profit, downtime costs, loss of the use of the equipment, cost of substitute
equipment, facilities or services, or claims of your customers for such damages
resulting from the purchase, use, or failure of the Product), regardless of cause or for
breach of any written or implied warranty is expressly disclaimed. The limitations and
exclusions of liability set forth herein apply to both Kodak and its suppliers.

Your righ ts

Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.

Outside the United States and Canada

In countries other than the United States and Canada, the terms and conditions of
this warranty may be different. Unless a specific Kodak warranty is communicated to
the purchaser in writing by a Kodak company, no warranty or liability exists beyond
any minimum requirements imposed by law, even though defect, damage, or loss may
be by negligence or other act.

Regulatory compliance

FCC compliance and advisory

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that

www.kodak.com/go/support

65

Appendix

interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) reorient or relocate the
receiving antenna; 2) increase the separation between the equipment and the
receiver; 3) connect the equipment to an outlet on a circuit different from that to
which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been provided with the
product or specified additional components or accessories elsewhere defined to be
used with the installation of the product, they must be used in order to ensure
compliance with FCC regulation.

Waste Electrical and Electronic Equipment/Battery disposal

In Europe: For human/environmental protection, it is your responsibility to
dispose of this equipment and batteries at a collection facility established for
this purpose (separate from municipal waste.) For more information, contact
your retailer, collection facility, or appropriate local authorities; or go to

www.kodak.com/go/recycle. Product weight:

488 g (17.2 oz) with batteries

Canadian DOC statement

DOC Class B Compliance—This Class B digital apparatus complies with Canadian

ICES-003.

Observation des normes-Classe B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.

CE

Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.

66 www.kodak.com/go/support

Australian C-Tick

N137

Eastman Kodak Company
Rochester, NY 14650

VCCI Class B ITE

Russian GOST-R

Appendix

China RoHS

www.kodak.com/go/support

67

Index 1

A

A/V out, 29
about this camera, 47
accessories

batteries, 63
buying, 58

SD/SDHC Card, 3
action print, 44
AF control, 46
auto

flash, 14

focus brackets, 9

focus control, 46

B

backlight mode, 18
battery

Zoom, 13

buy components, 6

C

cable

audio/video, 29

USB, 36
camera demo, 46
Canadian compliance, 66
candlelight modes, 18
caption, add, 38
card

Eye-Fi, 50

SD/SDHC, 3
care and maintenance, 61
charging

battery icon, 11

expected life, 63
icons, 11
load,1,2

types, 63
border, add, 38
brackets, focus, 9
bright mode, 18
burst mode, 17
button

Burst, 17

Delete, 25

Flash, 14

focus, 15

Review, 45

Share, 31, 33

68 www.kodak.com/go/support

children mode, 18
clean view, 10
clock, setting, 5
computer

connect camera, 36

transfer to, 36
computer connection setting, 47
connector, USB / A/V, 29
copy pictures to computer, 36
creative effects, 38
cropping pictures, 39

D

date, setting, 5
date/time stamp, 20

Index

delete

all saved to computer, 26
button, 25
pictures from card, 25

pictures from internal memory, 25
demo, camera, 46
display a slide show, 30
disposal, recycling, 61
download pictures, 36

E

edit videos, 42
effects

creative, 38

film, 38
email, 31
erase, format, 47
expected battery life, 63
exposure compensation, 21
external video device

viewing pictures, videos, 29
Eye-Fi

focus button, 15
format, 47

G

guidelines, battery, 63

H

help, Web links, 53
high ISO mode, 18
home icon, 27

I

icons

battery, 11
home, 27

mode dial, 12
infinity focus, 15
install

batteries, 1

battery, 2

SD/SDHC Card, 3

software, 7

Card, 50
settings, 47

K

keywords, 35

F

faces, tagging, recognition, 33

KODAK Camera Software, 47
Kodak Web sites, 53

FCC compliance, 65
film effects, 38
find pictures, 27
fireworks mode, 18
firmware, upgrade, 61
flash settings, 14
focus brackets, 9

L

landscape mode, 18
LCD

brightness, 46

reviewing pictures, 23

reviewing videos, 23
lens, clean, 61

www.kodak.com/go/support 69

Index

load

batteries, 1
battery, 2
SD/SDHC Card, 3

locate pictures, 27

M

macro focus, 15
magnify a picture, 28
maintenance, camera, 61
make picture from video, 43
manual exposure mode, 21
manual focus, 15
memory card, 3
menu settings, 45
mode

dial, 12
safe, 47

modes

backlight, 18
bright, 18
candlelight, 18
children, 18
fireworks, 18
high ISO, 18
landscape, 18
manual exposure, 21
night portrait, 18
photobooth, 18
self-portrait, 18
sunset, 18

video, 12
modes, picture-taking, 12
multiple selections, 26

N

night portrait mode, 18

O

online prints, ordering, 49
optical zoom, 13

P

panoramic pictures, 19
people, tagging, 33
photobooth mode, 18
PICTBRIDGE enabled printer, 48
picture size setting, 45
picture taking, 9
pictures

adding date/time stamp, 20
cropping, 39
mark for printing, 49
review icons, 24, 37, 41
reviewing, 23
sharing, 31
taking, modes, 12

transfer to computer, 36
playhead, video, 25
power icon, 11
power, camera, 4
print from a video, 44
printing

from a card, 49

optimizing printer, 53

order online, 49

PICTBRIDGE, 48

pictures, 48

tagged pictures, 49

70 www.kodak.com/go/support

Index

Program AE mode, 21
purchase components, 6

R

recycling, disposal, 61
red-eye, flash, 14
regulatory information, 65
replace components, 6
reset camera, 46
Review button, 45
reviewing

pictures/video, 23

reviewing pictures/videos, 25

slide show, 30

running slide show, 30

S

safe mode, 47
safety, 62
Scene modes, 18
SD/SDHC Card

insert, 3

printing from, 49
search pictures, 27
select multiple pictures/videos, 26
self-portrait mode, 18
setting

about this camera, 47

format, 47
LCD brightness, 46
picture taking modes, 12
picture, video size, 45
reset all settings, 46
safe mode, 47
sound volume, 46
tag people, 45

video out, 46
setting up the camera, 1
settings menu, 45
Share button, 31, 33
Share Button App, 7
shutter button, 9
slide show

running, 30
Smart Capture mode, 12
smart find, 27
social networks, 31
software

install, 7

upgrade, 61
sound volume, 46
specifications, camera, 59
strap, 6
sunset mode, 18
super macro focus, 15

auto focus, 46
computer connection, 47
date and time, 5
demo, camera, 46
Eye-Fi, 47
flash, 14

www.kodak.com/go/support 71

T

tag people setting, 45
tagging

keywords, 35

people, faces, 33
taking a picture, 9

Index

taking a video, 12
television, slide show, 29
time, setting, 5
tips

battery guidelines, 63

care & maintenance, 61
tools view, 10
transfer pictures, 36

Eye-Fi card, 51, 52

USB cable, 36
trimming a video, 42
troubleshooting, 53
turning camera on/off, 4

U

upgrade software, firmware, 61
URLs, Kodak Web sites, 53

in review mode, 23

volume

camera, setting, 46
video playback, 25

W

warranty, 64

Z

zoom, 13

USB

transfer pictures, 36

V

VCCI compliance, 67
video

action print, 44

edit, 42

out, 46

playhead, 25

playing, 25

recording, 12

review icons, 24, 37, 41

size, 45

transfer to computer, 36

viewing, 23
viewing

72 www.kodak.com/go/support