Kodak Li-Ion rechargeable
digital camera battery
KLIC-8000 (rechargeable)
To extend battery life, see page 59.
Kodak lithium digital camera
battery CRV3 (non-rechargeable)
2 AA lithium batteries
(non-rechargeable) Alkaline
batteries are NOT compatible.
www.kodak.com/go/support 1
Page 8
Setting up your camera
Turning on the camera
Setting the language, date/time
Language:
to change.
OK
Date/Time:
OK
to accept.
to change.
for previous/next field.
to accept.
NOTE: To change the date/time and language in the future, use the Menu button (see page 32).
2www.kodak.com/go/support
Page 9
Setting up your camera
Storing pictures on an optional SD or SDHC card
Your camera has internal memory. You can purchase an SD or SDHC card to store
more pictures and videos (www.kodak.com/go/z1085accessories).
CAUTION:
A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card when the Ready light is
blinking may damage the pictures, the card, or the camera.
NOTE: To choose a storage location for pictures and videos, see page 30.
www.kodak.com/go/support
3
Page 10
2Taking pictures/videos
Taking a picture
12
Press the Shutter
button halfway
to lock the
focus.
When the ready
Smart Capture
mode
Ready
light
Framing
marks
NOTE: When you press the Shutter button halfway down, the framing marks remain locked on the face or
the in-focus object, even if you move the camera. For more information on Smart Capture and other
modes, see page 6. For more information on framing marks, see page 5. Press to turn
on/off status icons and histogram.
light turns
green, press the
Shutter button
completely
down.
Taking a video
12
Video mode
4www.kodak.com/go/support
Press the Shutter
button
completely
down and
release.
To stop
recording, press
and release the
Shutter button
again.
Page 11
Taking pictures/videos
Reviewing the picture/video just taken
After you take a picture/video, the LCD displays a quickview for several seconds. (To
dismiss the quickview sooner, press the Shutter button halfway.)
Delete
The picture is saved
unless you press
the Delete button.
Play a video
To review pictures/videos anytime, see page 13.
Using the framing marks to take pictures
Framing marks indicate the camera focus area. The camera attempts to focus on
foreground subjects, even if they’re not centered in the scene.
1Press the Shutter button halfway.
When the subject is in focus, the framing marks turn green. If the camera is not
focusing on the desired subject (or if the framing marks disappear), release the Shutter
button and recompose the scene.
2Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in some SCN (scene) and Video modes. When you use AF Zone and
set Center Zone, the framing marks are fixed at Center Wide.
www.kodak.com/go/support
5
Page 12
Taking pictures/videos
Capture modes
Choose the mode that best suits
your subjects and surroundings.
Capture modeFor
General picture taking—it offers excellent image quality and ease of
use.
■ Faces are detected.
■ The scene is analyzed for other content and for lighting.
P
M
ISO
SCN
Smart
Capture
■ Kodak Perfect Touch technology is applied, for better pictures.
You can choose the best picture size and aspect ratio for your
needs—just press the Menu button and choose Picture Size.
■ 3:2 (the best choice when making 4 x 6 prints)
■ 16:9 (wide screen)
■ 4:3 (the default setting)
Program
More creative control. (See page 34).
Manual
High ISOPeople in low-light scenes.
Point-and-shoot simplicity when taking pictures under special
Scene
conditions.
Panorama
“Stitching” 2 or 3 pictures into 1 panoramic scene. (See page 11.)
VideoVideo with sound. (See page 4.)
6www.kodak.com/go/support
Page 13
Taking pictures/videos
Scene modes
1Turn the Mode dial to Scene .
2Press to display Scene modes.
NOTE: If the mode description turns off before you finish reading it, press OK.
3Press OK to choose a Scene mode.
SCN modeFor
PortraitFull-frame portraits of people.
SportSubjects that are in motion. Shutter speed is fast. The camera pre-settings are
Multi-Pattern Exposure Metering and Multi-Zone Focus.
LandscapeFar-away scenes. The camera uses infinity auto-focus. Auto-focus framing
marks are not available in Landscape.
Night
Portrait
Night
Landscape
SnowBright snow scenes.
BeachBright beach scenes.
TextDocuments. Focus is set to Macro Focus.
FireworksBright, colorful light displays. Flash does not fire. Place the camera on a flat,
FlowerClose-ups of flowers or other small subjects in bright light. Focus is Macro.
Manner/
Museum
SelfPortrait
StagePeople on a lit stage. Fast shutter speed, high ISO. Flash and sounds are off.
Reducing red eye of people in night scenes or low-light conditions. Place the
camera on a flat, steady surface or use a tripod.
Distant scenery at night. Flash does not fire. Place the camera on a flat, steady
surface or use a tripod.
steady surface or use a tripod.
Quiet occasions, like a wedding or lecture. Flash is off.
Close-ups of yourself. Assures proper focus and minimizes red eye.
(Flash setting can be changed.)
BacklightSubjects that are in shadow or “backlit” (when light is behind the subject).
Candle light
Capturing the ambiance of candle light.
www.kodak.com/go/support
7
Page 14
Taking pictures/videos
SCN modeFor
Sunset Capturing the deep hues seen at sunset.
Using optical zoom
Use optical zoom to get up to 5X closer to your subject while taking pictures/videos.
1Use the LCD to frame your subject. For focus
distances, see Camera specifications, page 55.
2Press Telephoto (T) to zoom in. Press Wide Angle
(W) to zoom out.
3Take the picture or video.
Optical zoom
WTD
Digital zoom
NOTE: To get a focused picture every time, remember:
■ Use the auto focus framing marks, page 4.
■ As you zoom in, move away from your subject.
Use digital zoom to get up to 5X beyond optical zoom while taking pictures. Press
Telephoto (T) to the maximum optical zoom.
NOTE: You may notice decreased image quality when using digital zoom. The slider on the zoom indicator
turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
8www.kodak.com/go/support
Page 15
Taking pictures/videos
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Flash settings are limited in some capture modes.
Press the button repeatedly to scroll
through flash modes. (See flash modes below.)
Flash modes Flash fires
Auto When the lighting conditions require it.
OffNever.
Every time you take a picture, regardless of the lighting conditions. Use when
the subject is in shadow or is “backlit” (when the light is behind the subject).
Fill
In low light, hold the camera steady or use a tripod.
NOTE: (Not available in Smart Capture mode.)
If Red-eye Pre-flash is turned off (in
the Setup menu): the flash fires
Redeye
Flash-to-subject distance in Smart Capture mode
Wide angle 26.9 ft (8.2 m)
Telephoto14.4 ft (4.4 m)
once and the camera automatically
corrects red-eye in the picture.
To turn the Red-eye Pre-flash feature on/off, see page 31.
If Red-eye Pre-flash is turned on (in the
Setup menu): the flash fires once so the
eyes become accustomed to the flash, then
fires again when the picture is taken.
www.kodak.com/go/support
9
Page 16
Taking pictures/videos
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press.
Place camera on a tripod or flat surface.
1
In most Still modes, press the Self-Timer/Burst button
2
• Once for a 10-second delay (so you have time to get into the scene)
• Again for a 2-second delay (for a steady, auto-shutter release on a tripod)
• Again for 2-shot (one picture taken after 10 seconds and another picture
taken 8 seconds later)
Compose the scene.
3
Press the Shutter button halfway, then
4
completely down.
The picture is taken after the delay.
:
To cancel the Self-timer during countdown, press the Self-timer/Burst button ,
or press the Shutter button completely down.
Use the same procedure to use the self-timer in Video mode, but:
■ Turn the Mode dial to Video .
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
10www.kodak.com/go/support
Page 17
Taking pictures/videos
Taking panoramic pictures
Use panorama to “stitch” up to 3 pictures into a panoramic scene.
NOTE: For best results, use a tripod. Individual pictures are not saved, even if panorama capture is
cancelled before stitching occurs. (Exposure Compensation, White Balance, Exposure Metering, AF
Zone, AF Control, Color Mode, and Sharpness are set with the first picture. The flash is set to Off.)
You can use the self-timer (2- and 10-second delays) while taking panoramic pictures. See page 10.
1Turn the Mode dial to Panorama .
2Press to highlight Panorama Left-Right or Panorama Right-Left (depending
on the direction you want to pan), then press OK.
3Take the first picture.
After a quickview, the LCD displays the liveview and an “overlay” from the first picture.
4Compose the second picture. Make the overlay from the first picture cover the
same portion in the new picture.
5If you are taking only 2 pictures, press OK to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
1
2
Take 2 or 3 pictures.
Get 1 panoramic picture.
3
www.kodak.com/go/support
11
Page 18
Taking pictures/videos
Understanding the picture-taking icons
Status icons indicate mode, feature, and camera status.
Low battery
Focus mode
ISO speed
Exposure compensation
12www.kodak.com/go/support
Page 19
3Working with pictures/videos
Reviewing pictures/videos
Press the Review button to view and work with your pictures/videos. Press Review
again to exit.
1Press the Review button.
2Press to view previous/next picture/video.
NOTE: Pictures taken at the 3:2 and 16:9 aspect ratios (see page 27)
do not fill the LCD.
Review
Magnifying a picture during review
magnify 2X - 8X
T
view other parts of the picture
OK or W
NOTE: If you press the W button while at 1X, the view changes from single-picture to multi-up thumbnails.
(See page 24.)
www.kodak.com/go/support 13
return to 1X
Page 20
Working with pictures/videos
Playing a video
1Press the Review button.
2Press to locate previous/next video.
3Press to play a video.
■Press during playback to adjust the
volume. (Press during pause to go to
2X
4X
Reverse
Playback speed
1X
2X
Forward
4X
previous/next frame. Press during 4X to
jump to a bookmark. See page 20.)
■Press OK to pause/resume.
■Press during playback to play at 2X speed;
press again for 4X.
■Press during playback to reverse at 2X
speed; press again for 4X.
Viewing picture/video information
1Press the Review button.
2Repeatedly press the Info button to turn on/off status icons and
picture/video info.
14www.kodak.com/go/support
Page 21
Working with pictures/videos
Deleting pictures/videos
1Press the Review button.
2Press to find a picture/video.
3Press the Delete button.
4Follow the screen prompts.
Using the undo delete feature
If you accidentally delete a picture/video, use Undo Delete to retrieve it. This feature is
available immediately after you delete a picture/video in Review mode (when the
Undo Delete option appears).
1Press to highlight Undo Delete.
2Press OK.
The deleted picture/video appears.
3Select Exit to exit the Delete menu.
Protecting pictures/videos from deletion
1Press the Review button.
2Press to find a picture/video.
3Press the Menu button.
4Press to highlight Protect, then press OK.
The Protect icon appears with the protected picture/video.
■Press the Menu button to exit the menu.
CAUTION:
Formatting internal memory or an SD or SDHC card deletes all (including
protected) pictures/videos. (Formatting internal memory also deletes
email addresses, tag names, and favorites.)
www.kodak.com/go/support
15
Page 22
Working with pictures/videos
Using the menu button in Review
1Press the Review button, then the Menu button.
2Press to choose a tab:
■Review to view pictures/videos
■Edit to edit pictures/videos
■Setup for other camera settings
3Press to highlight a setting, then press OK.
4Choose an option, then press OK.
OptionsOptions
View AllSee page 24
Pictures
SearchSee page 24CropSee page 18
TagSee page 41Sound TagSee page 17
FavoriteSee page 42
Protect/UnprotectSee page 15TrimSee page 19
Videos
CopySee page 25Action PrintSee page 21
Slide ShowSee page 21BookmarkSee page 20
Multimedia Slide Show See page 22
Multi-upSee page 24
Select All/Deselect AllSee page 25
Perfect Touch tech. See page 18
Make PictureSee page 19
16www.kodak.com/go/support
Page 23
Working with pictures/videos
Adding sound tags
You can record a voice or sound (up to 1 minute long) to a picture.
NOTE:
Only one sound tag can be added to each picture (not to videos).
Recording a sound tag
1Press the Review button, then to find a picture.
2Press the Menu button, then to highlight the Edit tab.
3Press to highlight Sound Tag, then press OK.
4Follow the screen prompts.
The sound tag is applied to your picture.
■Press the Menu button to exit the menu.
Playing a sound tag
1Press the Review button, then to find a
tagged picture.
2Press to play the sound tag.
3Press to adjust the volume.
Review
www.kodak.com/go/support
■Press OK to stop playback.
17
Page 24
Working with pictures/videos
Cropping pictures
You can crop a picture so that only the desired portion of the picture remains. (You
cannot crop these pictures: panoramic, 16:9, video action prints, pictures from a
video, or pictures that are already cropped.)
1Press the Review button, then to find a
picture.
Picture
Cropped picture
2Press the Menu button, then to highlight the
Edit tab.
3Press to highlight Crop. Press OK.
4Press Telephoto (T) to zoom in, or to move the crop box. Press OK.
5Follow the screen prompts.
The picture is cropped, the original saved. (Cropped pictures cannot be cropped again.)
■ Press the Menu button to exit the menu.
Using Kodak Perfect Touch technology
Kodak Perfect Touch technology helps ensure better, brighter pictures. Perfect Touch is
automatically applied to pictures taken in Smart Capture mode. (You cannot enhance
videos, panoramic pictures, pictures that are already enhanced, or pictures taken in
Smart Capture mode.)
1Press the Review button, then to find a picture.
2Press the Menu button, then to highlight the Edit tab.
3Press to highlight Perfect Touch tech. Press OK.
A preview is shown in a split screen. Press to view other parts of the picture.
4Press OK. Follow the screen prompts to replace the original picture or to save the
enhanced picture as a new one.
■Press the Menu button to exit the menu.
18www.kodak.com/go/support
Page 25
Working with pictures/videos
Editing videos
Making a picture from a video
You can choose a single frame from a video, then make a picture suitable for printing.
1Press the Review button, then to find a video.
2Press the Menu button, then to highlight the
Edit tab.
Video
Picture
3Press to highlight Make Picture, then press
OK.
4Press OK to play the video. (Press OK to pause).
Press to navigate through video frames.
5During play or pause, press to make a picture.
A picture is created. (The original video is saved.)
■Press the Menu button to exit the menu.
Trimming a video
You can delete an unwanted portion from the beginning or end of a video.
1Press the Review button, then to find a video.
2Press the Menu button, then to highlight the
Edit tab.
Video
Trimm ed video
www.kodak.com/go/support
3Press to highlight Trim. Press OK.
4Follow the screen prompts.
The video is trimmed. (You can save it as a new video
or replace the original.)
■Press the Menu button to exit the menu.
19
Page 26
Working with pictures/videos
Using video bookmarks
You can set bookmarks at interesting places in your video, then jump from one
bookmark to another.
Setting bookmarks
1Press the Review button, then to find a video.
2Press the Menu button, then to highlight the
Edit tab.
3Press to highlight Bookmark, then press OK.
Highlight Create/Edit, then press OK.
4Press to add bookmarks. When finished
adding up to 9 bookmarks, press .
Using bookmarks
■ Press the Menu button to exit the menu.
1Press the Review button, then to find a video.
2Press to play the video. To jump to the first
bookmark, press and hold for 4 seconds
while the video is playing.
■After you jump to a bookmark, press to
jump to other bookmarks.
■To view all bookmarked video frames, press the
Zoom wide angle (W) button. To return to
normal view, press the telephoto (T) button.
20www.kodak.com/go/support
Page 27
Working with pictures/videos
Making a video action print
From a video, you can make a 4-, 9-, or 16-up picture, suitable for a 4 x 6-inch
(10 x 15 cm) print.
1Press the Review button, then to find a video.
2Press the Menu button, then to highlight the
Edit tab.
Video
■ Auto options: The camera includes the first and last frames, then 2, 7, or 14
4-, 9-, or
16-up picture
3Press to highlight Action Print. Press OK.
Choose an option, then press OK:
equally spaced frames.
■ Manual: You choose the first and last frames; the camera chooses 2, 7, or 14
equally spaced frames.
■ Use Bookmarks: Bookmarked frames are used.
A 4-, 9-, or 16-up picture is created. If you have less than 4 or 9 bookmarks,
equally-spaced video frames are used.
■ Press the Menu button to exit the menu.
Running a slide show
Use Slide Show to display your pictures/videos on the LCD.
Starting the slide show
1Press the Review button, then the Menu button.
2Press to highlight Slide Show, then press OK.
3Press to highlight Begin Show, then press OK.
The slide show begins.
■To interrupt the Slide Show, press OK.
www.kodak.com/go/support
21
Page 28
Working with pictures/videos
Changing the slide show display interval
You can set the display interval from 3–60 seconds.
1On the Slide Show menu, press to highlight Interval, then press OK.
2Select a display interval.
To scroll through the seconds quickly, press and hold .
3Press OK.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1On the Slide Show menu, press to highlight Loop, then press OK.
2Press to highlight On, then press OK.
3Press to highlight Begin Show, then press OK.
The slide show repeats until you press OK or battery power is exhausted.
Creating a multimedia slide show
Multimedia Slide Show lets you create and save a slide show. First, select 2-20
pictures (see page 25). Then:
1Press the Review button.
2Press the Menu button. Press to highlight Multimedia Slide Show, then
press OK.
3Press to highlight a choice (Begin Show, Music, Effect, Play Order), then
press OK. Begin Show creates a multimedia slide show file.
Each picture is displayed once. To interrupt the slide show, press OK. After the slide
show plays, you may save or modify it.
22www.kodak.com/go/support
Page 29
Working with pictures/videos
Displaying pictures/videos on a television
You can display pictures/videos on a television, computer monitor, or any device
equipped with a video input. To connect the camera to a television, use an A/V cable
(may be sold separately).
For a true HDTV experience on your television, dock your camera on the Kodak
EasyShare HDTV dock. Visit www.kodak.com/go/hdtvdock.
For high definition video system requirements visit www.kodak.com/go/hdsysreq.
www.kodak.com/go/support
23
Page 30
Working with pictures/videos
Viewing pictures/videos in different ways
Viewing as thumbnails (multi-up)
1Press the Review button.
2Press the Wide Angle (W) button to change from single-picture view to multi-up
thumbnails.
3Press Telephoto (T) to return to single-picture view.
■To select multiple pictures/videos, see page 25.
■Press the Review button to exit Review.
Searching pictures by date, favorites, or other tag
If you have many pictures on your camera or card, you can sort them so that only
some are visible at a time. You can sort by the date a picture was taken or—if you’ve
tagged pictures with a favorites tag or a tag that you created—you can sort by tag.
1Press the Review button, then the Menu button.
2Press to highlight Search, then press OK.
3Press to highlight the Date, Favorite, or Tag tab, then to select a folder.
4Press to highlight a folder, then press OK. (If you chose a Month/Year folder,
press OK to see the Day folders.) When you are finished choosing tabs and folders,
highlight Exit and press OK.
5To see the results of your search, highlight Save, then press OK.
Pictures are displayed in multi-up view. Press to view them. Press the
Telephoto (T) button to view the picture full-screen. Press the Wide Angle (W) button to
return to multi-up view.
■Press the Review button to exit Review.
■For more about tags, see page 41.
■To select multiple pictures/videos, see page 25.
24www.kodak.com/go/support
Page 31
Working with pictures/videos
Selecting multiple pictures/videos
Use the multi-select feature when you have two or more pictures/videos to print or
delete. (Multi-select can also be used in Multi-Up mode, page 24.)
1Press the Review button, then to find a
picture/video.
2Press OK to select pictures/videos.
A check mark appears on the picture. You can now
Selected
pictures
print, transfer, or delete the selected pictures. You can
press OK a second time to remove a check mark.
Copying pictures/videos
You can copy pictures/videos from a card to internal memory or from internal memory
to a card.
NOTE: Before you copy, make sure that a card is inserted in the camera.
Copy pictures/videos:
1Press the Review button, then the Menu button.
2Press to highlight Copy, then press OK.
3Press to highlight an option, then press OK.
NOTE: Pictures/videos are copied, not moved. To remove pictures/videos from the original location after
copying, delete them (see page 15).
www.kodak.com/go/support
25
Page 32
Working with pictures/videos
Understanding the review icons
Pictures
Favorite tag
Protected
Email tag
Perfect Touch tech.
Review mode
Selected picture
Tag
Scroll arrows
Print tag/number of prints
Picture number
Image storage location
Low battery
Videos
Favorite tag
Protected
Email tag
Review mode
Selected picture
Tag
Scroll arrowsLow battery
Video length
Video number
Image storage location
26www.kodak.com/go/support
Page 33
4Doing more with your camera
Using the Menu button to change settings
NOTE: Some settings remain until you change them; others remain until you turn off the camera. Some
capture modes offer limited settings. Press the Info buttonfor information about camera
settings and options.
1Press the Menu button.
2Press to highlight a menu tab:
■Capture for the most common picture-taking settings.
■Capture + for other picture-taking settings.
■Setup for other camera settings.
3Press to highlight a setting, then press OK.
4Choose an option, then press OK.
Press Menu, , ,
and OK to access settings
Picture Size
Choose a picture resolution.
NOTE: See next setting for Picture
Size in Smart Capture
mode.
Capture Options
10.0 MP (4:3)—Highest resolution, largest file size
1.2 MP (4:3)—For emailing, Internet, or conserving space
www.kodak.com/go/support 27
Page 34
Doing more with your camera
Press Menu, , ,
and OK to access settings
Picture Size (while in Smart
Capture mode; for more
information, see page 6)
Choose a picture resolution.
Video Size
Available only in Video mode.
Capture Options
10.0 MP: (4:3)
8.9 MP: (3:2)
7.5 MP: (16:9)
5.0 MP: (4:3)
4.5 MP: (3:2)
3.8 MP: (16:9)
3.1 MP: (4:3)
2.8 MP: (3:2)
2.4 MP: (16:9)
1280 x 720 (HD720p) HQ—HDTV format; uses the least
compression and gives the highest video quality. (29-min.
maximum video. Orientation sensor is disabled.)
640 x 480 HQ—medium quality and file size. (80-min.
Color Mode
Choose color tones.
maximum video.)
320 x 240—lowest quality; smallest file size. (80-min.
maximum video.)
High Color
Natural Color
Low Color
Black & White
Sepia
NOTE: EasyShare software also lets you change a color picture to
black-and-white or sepia.
Unavailable in Video mode.
28www.kodak.com/go/support
Page 35
Doing more with your camera
Press Menu, , ,
Capture Options
and OK to access settings
AF Control
Choose an auto-focus setting.
Available only in SCN, P/M, and
Video modes.
Continuous AF—because the camera is always focusing,
there is no need to press the Shutter button halfway down to
focus.
Single AF—uses TTL-AF (through-the-lens auto focus) when
the Shutter button is pressed halfway down.
Using the Capture + menu
Press Menu, , ,
and OK to access settings
White Balance
Choose your lighting condition.
Available only in P/M and
Panorama modes.
Capture + Options
Auto—automatically corrects white balance. Ideal for
general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light
bulbs. Ideal for indoor pictures under tungsten or halogen
Exposure Metering
Evaluate light levels at specific
areas of a scene.
Available only in P/M and
Panorama modes.
lighting without flash.
Fluorescent—corrects the green cast of fluorescent
lighting. Ideal for indoor pictures under fluorescent lighting
without flash.
Open Shade—for pictures in shade in natural lighting.
Multi-pattern—evaluates lighting conditions throughout
the image to give an optimum picture exposure. Ideal for
general picture taking.
Center-weighted—evaluates the lighting conditions of
the subject centered in the LCD. Ideal for backlit subjects.
Spot—similar to Center-weighted, except the metering is
concentrated on a smaller area of the subject centered in the
LCD.
www.kodak.com/go/support
29
Page 36
Doing more with your camera
Press Menu, , ,
Capture + Options
and OK to access settings
AF Zone
Select a large or concentrated
area of focus.
Available only in P/M and
Panorama modes.
Exposure Bracketing Interval
Choose the difference in
exposure compensation while
Multi-zone—evaluates 5 zones to give an even picture
focus. Ideal for general picture taking.
Center-zone—evaluates the small area centered in the
LCD. Ideal when precise focus of a specific area in the
picture is needed.
Off
+/- 0.3 EV
+/- 0.7 EV
using exposure bracketing.
+/- 1.0 EV
Available only in P/M mode.
See page 38.
Sharpness
Control picture sharpness.
Available only in P/M and
High
Normal
Low
Panorama modes.
Using the Setup menu
Press Menu, , ,
and OK to access settings
LCD BrightnessPower Save
Image Storage
Choose a storage location for
pictures/videos.
Setup Options
High Power
Auto—the camera uses the card if one is in the camera. If
not, the camera uses internal memory.
Internal Memory—the camera uses internal memory,
even if a card is installed.
30www.kodak.com/go/support
Page 37
Doing more with your camera
Press Menu, , ,
and OK to access settings
Set Tag
Assign tag names to
pictures/videos. Select tag
name(s) before you take pictures
or videos. Then, new pictures/
videos are assigned that tag
name(s).
Capture Frame Grid
Use the frame grid to divide the
LCD screen into thirds, vertically
and horizontally.
Date Stamp
Imprint the date on pictures.
Setup Options
Clear All
Add Tag
Delete Tag
Exit
Tag Name 1
Tag Name 2
See page 41.
On
Off
On
Off
Red-eye Pre-flash
Choose if the Red-eye flash fires
automatically before a picture is
taken.
NOTE: The camera digitally corrects
red-eye, when the Red-eye Pre-flash
is set to Off.
Image Stabilizer
Choose when image stabilization
occurs.
Quickview
Show a picture/video as soon as it
is taken.
On
Off
Continuous—Stabilization occurs continuously.
Single—Stabilization occurs only when the Shutter button
is pressed halfway down.
Off
On
Off
www.kodak.com/go/support
31
Page 38
Doing more with your camera
Press Menu, , ,
Setup Options
and OK to access settings
Advanced Digital Zoom
Zoom using optical, then digital
zoom.
Continuous—Zooming is continuous between optical and
digital zoom.
Pause—Zooming pauses at the optical zoom maximum.
To use digital zoom, release then press the Telephoto (T)
zoom button.
None—Digital zoom is off.
Orientation Sensor
Orient pictures so that they are
For pictures—On, On Transfer, Off
For video—On, Off
displayed with the correct side up.
Camera Sounds
Choose sound effects.
Theme—applies the same sound effect set to all functions.
Individual—choose a sound effect for each function.
Sound VolumeOff
High
Medium
Low
Date & TimeSee page 2. The format chosen is used for all date/time
features.
Auto Power Off
Choose inactivity time until
camera turns off.
10 minutes
5 minutes
3 minutes
1 minute
Video Out
Choose the regional setting for
NTSC—used in North America and Japan.
PAL—used in Europe and China.
connecting to a television or other
external device.
LanguageSee page 2.
Reset CameraReset all camera settings to their defaults.
32www.kodak.com/go/support
Page 39
Doing more with your camera
Press Menu, , ,
and OK to access settings
Format
CAUTION:
Formatting deletes all
pictures/videos, including
those that are protected.
About
View camera information.
Setup Options
Memory Card—deletes everything on the card; formats
the card.
Cancel—exits without making a change.
Internal Memory—deletes everything in internal
memory including email addresses, and tag names; formats
the internal memory.
www.kodak.com/go/support
33
Page 40
Doing more with your camera
P and M modes
Use Program and Manual modes when you want more control over your camera.
ModeFor
Ease of auto shooting with full access to most
menu options. The camera automatically sets the
Program
Manual
shutter speed and aperture (f-stop) based on the
scene lighting.
The highest level of creative control. (To prevent
blur, use a tripod for slow shutter speeds.)
Press to control
Exposure compensation (how
much light enters the camera),
ISO speed, and focus mode.
Aperture, shutter speed, ISO
speed, and focus mode.
NOTE: Settings you change in P or M mode apply only to pictures taken in that mode. For example, if you
change the Color Mode to Sepia while in P or M mode, you retain the default setting (Color) for
Smart Capture and Scene modes.
The settings, including Flash, are maintained for P and M modes—even when you change modes or
turn off the camera.
34www.kodak.com/go/support
Page 41
Doing more with your camera
Changing P or M mode settings
P and M modes control ISO, focus, exposure compensation, shutter speed, and
aperture (f-number, also known as f-stop). Use the Menu button to control all other
settings.
P and M Options
White—selectable
Grey—non-selectable
Yellow—changeable value
Red—out of range
Focus mode
ISO speed
Exposure compensation
Shutter speed
Aperture
1Turn the Mode dial to P or M.
The mode options are displayed.
2Use to move between settings and to change the value.
NOTE: Some settings may be unavailable (see P and M color options). The arrows disappear when you
cannot make further value changes.
3Take a picture.
P and M modes—see page 34.
Aperture—(also known as f-stop) control the size of the lens opening, which
determines the depth of field.
■ Smaller f-stop numbers indicate a larger lens opening; good for portraits and
low-light conditions.
■ Larger f-stop numbers indicate a smaller lens opening; keeps the main subject
sharp; good for landscapes and well-lit conditions.
Shutter speed—control how long the shutter stays open.
www.kodak.com/go/support
35
Page 42
Doing more with your camera
Exposure Compensation—adjust the exposure; good for controlling backlit or
non-standard scenes. If the picture is too light, decrease the setting; if it’s too dark,
increase the setting.
ISO speed—adjust the camera’s sensitivity to light. Higher ISO indicates greater
sensitivity. ISO 6400 and 8000 are available only in 3.1 MP and lower picture size
(see page 27).
NOTE: A higher ISO may produce unwanted grain or “noise” in a picture.
Focus mode—select a large or concentrated area of focus.
Focus mode Description
Normal AF
Macro
Infinity
Manual
Focus setting for general picture-taking.
Sharpness and detail in pictures at close range. Use available light instead
of flash, if possible. The camera automatically sets the focus distance
depending on the zoom position. The close-up distances are:
Wide angle: 7.9–27.6 in. (0.2–0.7 m)
Telephoto: 19.7–39.4 in. (0.5–1.0 m)
Distant subjects. Auto-focus framing marks are unavailable.
Focus is at center position. When MF icon appears, press OK to display
focus indicator. Press to adjust the setting. A magnified image
appears on the screen when adjusting focus position.
Using the framing grid to compose a picture
The framing grid divides the LCD into thirds—vertically and horizontally. This is
helpful if, for example, you want to balance a picture between water, earth, and sky.
To turn on/off the framing grid, see page 31.
36www.kodak.com/go/support
Page 43
Doing more with your camera
Using burst
ModeIconDescriptionPurpose
Camera takes up to 3 pictures while the Shutter
button is pressed.
First
Burst
Camera takes up to 30 pictures while the Shutter
button is pressed. When the Shutter button is
released, only the last 3 pictures are saved.
Last
Burst
Capture an expected
event.
Example:
A person swinging a
golf club.
Capture an event when
the precise timing is
uncertain.
Example:
A child blowing out
birthday candles.
1In most Still modes, press the Self-timer/Burst button .
NOTE: Burst is unavailable in Portrait, Night Portrait, Night Landscape, Backlight, Fireworks, and
Panorama modes.
2Press the Shutter button halfway to focus and set exposure.
3Press the Shutter button completely down and hold it to take pictures.
The camera stops taking pictures when you release the Shutter button, when the
pictures are taken, or when there is no more storage space.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page 15).
www.kodak.com/go/support
37
Page 44
Doing more with your camera
Using exposure compensation to adjust brightness
In P, M, and Panorama modes, you can adjust exposure compensation before you take
a picture to make your pictures darker or lighter. Only the first picture in Panorama
mode can be adjusted—that adjustment is applied to the remaining pictures.
1Press to access the exposure compensation setting.
2Press to decrease or to increase exposure compensation.
An exposure compensation level is shown on the LCD and the image gets darker or lighter.
3Take the picture when you are satisfied with the exposure compensation level.
Using exposure compensation with exposure bracketing
In P and M modes, you can use exposure compensation (see page 38) in conjunction
with exposure bracketing to get the best exposure.
If the exposure
compensation is set to:
0.0
+1.0
–1.0
And if the exposure bracketing
interval is set to 0.3 steps:
(Set the Exposure Bracketing Interval
in the Capture + menu.)
Then the exposures
taken are:
–0.3, 0.0, +0.3
+0.7, +1.0, +1.3
–1.3, –1.0, –0.7
Using the histogram to view picture brightness
Use the histogram to evaluate the distribution of light before or after you take a
picture. Optimal exposure is achieved when the peak is in the middle of the
histogram. The flash may affect a picture’s light and shadow.
To turn on the histogram in Capture mode or in Review, press the Info button
until the histogram appears.
Dark pictureBalanced pictureBright picture
38www.kodak.com/go/support
Page 45
Doing more with your camera
Sharing your pictures
Press the Share button to tag your pictures and videos. When they are transferred to
your computer, you can share them. Use the Share button:
■ Any time. (The most recent picture/video taken is then displayed.)
■ After pressing the Review button.
Tagging pictures for printing
1Press the Share button. Press to locate a picture.
2Press to highlight Print , then press OK.*
3Press to select the number of copies (0-99).
Optional: You can apply a print quantity to other pictures with the print quantity
screen displayed. Press to locate a picture. Press to change the print
quantity. Repeat until the desired print quantity is applied to pictures.
4Press OK.
The Print icon appears in the status area.
■Press the Share button to exit the menu.
Printing tagged pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software print screen opens. For details, click the Help button in EasyShare software.
For more information on printing from your computer, printer dock, PictBridge
enabled printer, or card, see page 45.
NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to a 3:2 picture size.
www.kodak.com/go/support
39
Page 46
Doing more with your camera
Tagging pictures/videos for email
First—create email addresses
To create email addresses, use the Add Address option and the on-camera keyboard;
or create them in EasyShare software and copy them to the camera’s internal memory.
Second—tag pictures/videos on your camera
1Press to find a picture/video, the press the Share button.
2Press to highlight Email, then press OK.
3Press to highlight an email address, then press OK.
To assign the same address to other pictures/videos, press to scroll through
pictures/videos. When the picture/video you want is displayed, press OK.
To send the pictures/videos to more than one address, repeat step 3.
Selected addresses are checked.
4To remove a selection, highlight a checked address and press OK. To remove all
email selections, highlight Clear All.
5Press to highlight Exit, then press OK.
The Email icon appears in the status area.
■Press the Share button to exit the menu.
NOTE: To add an email address, use the Add Email menu choice. Then use the on-camera keyboard.
Third—transfer and email
When you transfer these pictures/videos to your computer, EasyShare software
prompts you to send them. For details, see Help in EasyShare software.
40www.kodak.com/go/support
Page 47
Doing more with your camera
Tagging pictures/videos with tags that you create
Use the Tag feature to create tag names and assign them to pictures/videos.
1Press the Review button, then find a picture/video.
2Press the Menu button.
3Press to highlight Tag, then press OK.
NOTE: To add a tag name, use the Add Tag option, then use the on-camera keyboard.
4Press to highlight a Tag name, then press OK.
To tag other pictures, press to scroll through pictures. When the picture you
want is displayed, press OK.
5Press to highlight Exit, then press OK.
The tag name appears with the picture. A plus (+) means the picture has more than one
tag. When you transfer the tagged pictures/videos to your computer, EasyShare
software opens and categorizes your pictures/videos with the appropriate tags.
Pre-tagging
Use the Set Tag feature to pre-select tag names before you take pictures/videos. Then,
all the pictures/videos you take are tagged with those tag names. When Set Tag is in
use, the tag appears while you are taking pictures/videos.
www.kodak.com/go/support
41
Page 48
Doing more with your camera
Tagging pictures/videos as favorites
Tag pictures as favorites
1Press the Review button. Press to find a picture.
2Press the Menu button, highlight Favorite, then press OK.
The Favorite icon appears in the status area. To remove the tag, press OK again.
View favorites on your camera
1Press the Review button, then the Menu button.
2Choose Search, then Favorites.
42www.kodak.com/go/support
Page 49
5Transferring and printing
pictures
Installing the software
CAUTION:
Caution: Install EasyShare software
to the computer. Failure to do so may cause the software to load
incorrectly.
1Close all software applications that are open on your computer (including
anti-virus software).
2Place the EasyShare software CD into the CD-ROM drive.
3Load the software:
Windows OS—if the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD.
Mac OS X—double-click the CD icon on the desktop, then click the Install icon.
4Follow the on-screen instructions to install the software.
NOTE: When prompted, take few minutes to electronically register your camera and software. To register
later, see
www.kodak.com/go/register
.
before
connecting the camera
5If prompted, restart the computer. If you turned off anti-virus software, turn it back
on. See the anti-virus software manual for details.
For software help, click the Help button in EasyShare software.
www.kodak.com/go/support 43
Page 50
Transferring and printing pictures
Transferring pictures with the USB cable
1
Turn off the camera.
2
Connect the USB cable (U-8).
Turn on the camera.
3
Kodak EasyShare software opens on your computer
and prompts you through the transfer process.
NOTE: Visit
www.kodak.com/go/howto
for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■ Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 45)
Purchase these and other accessories at a dealer of Kodak products or
www.kodak.com/go/z1085accessories.
44www.kodak.com/go/support
Page 51
Transferring and printing pictures
Printing pictures
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or
without a computer. Purchase this and other accessories at a dealer of Kodak
products or visit www.kodak.com/go/z1085accessories.
Direct printing with a PictBridge enabled printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need:
■ Camera with fully charged batteries
■ PictBridge enabled printer
■ USB cable (may be sold separately)
Connecting the camera to a PictBridge enabled printer
1Turn off the camera and printer.
2Connect the appropriate USB cable from the camera to the printer. (See your
printer user guide or visit www.kodak.com/go/z1085accessories.)
www.kodak.com/go/support
45
Page 52
Transferring and printing pictures
Printing from a PictBridge enabled printer
1Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu interface turns off, press any
button to redisplay it.
2Press to choose a printing option, then press OK.
Current Picture—Press to choose a picture. Choose the number of copies.
Print Tagged—If your printer is capable, print pictures that you tagged for
printing and choose a print size.
Index Print—Print thumbnails of all pictures. This option requires one or more
sheets of paper. If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory or on a card. Choose the
number of copies.
Image Storage—Access internal memory or card.
NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer.
Disconnecting the camera from a PictBridge enabled printer
1Turn off the camera and printer.
2Disconnect the USB cable from the camera and the printer.
Using a printer that is not PictBridge enabled
For details on printing pictures from your computer, click the Help button in EasyShare
software.
46www.kodak.com/go/support
Page 53
Ordering prints online
Transferring and printing pictures
Kodak
Gallery (www.kodakgallery.com) is one of the many online print services
offered in the Kodak EasyShare software. You can easily:
■ Upload your pictures.
■ Edit, enhance, and add borders to your pictures.
■ Store pictures, and share them with family and friends.
■ Order high-quality prints, photo greeting cards, frames, and albums—and have
them delivered to your door.
Printing from an optional SD/SDHC card
■ Automatically print print-tagged pictures when you insert your card into a printer
with an SD/SDHC card slot. See your printer user’s guide for details.
■ Make prints at an SD/SDHC card-capable Kodak picture maker/picture kiosk.
(Contact a location prior to visiting. See www.kodak.com/go/picturemaker.)
■ Take the card to your local photo retailer for professional printing.
Dock compatibility for your camera
To see which EasyShare printer docks are compatible with your camera, visit
www.kodak.com/go/dockcompatibility.
Purchase camera docks, printer docks, and other accessories at a dealer of Kodak
products or www.kodak.com/go/z1085accessories.
www.kodak.com/go/support
47
Page 54
6Troubleshooting
For step-by-step product support, visit www.kodak.com/go/z1085support and select
Interactive Troubleshooting & Repairs.
Camera problems
IfTry one or more of the following
Camera does not
turn on.
Camera does not
turn off.
Pictures remaining
number does not
decrease after
taking a picture.
Stored pictures are
corrupted.
In Review mode,
you do not see a
■ Install new batteries (see page 1).
■ Charge rechargeable batteries.
■ Remove the battery, then reinsert or replace it. If the camera still does
not function, visit www.kodak.com/go/z1085support and select
Interactive Troubleshooting & Repairs.
■ The camera is operating normally. Continue taking pictures.
■ Retake pictures. Do not remove card while the Ready light is blinking.
Keep rechargeable batteries charged.
■ Transfer the pictures to the computer (see page 44), then format the
card or internal memory (see page 33).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■ Check the image storage location setting (see page 30).
picture (or the
expected picture)
on the LCD screen.
48www.kodak.com/go/support
Page 55
IfTry one or more of the following
Troubleshooting
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Shutter button
does not work.
Slide show does
not run on external
video device.
Picture is too light.
■ Transfer the picture to the computer (see page 44), then format the
card or internal memory (see page 33).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■ Turn on the camera (see page 2).
■ Wait until the Ready light stops blinking red before attempting to take
another picture.
■ Transfer pictures to the computer (see page 44), delete pictures from
the camera (page 15), switch image storage locations (see page 30),
or insert a card with available memory (page 3).
■ Adjust the camera Video Out setting (NTSC or PAL, see page 32).
■ See the external device’s user’s guide.
■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
Picture is not clear.
Picture is too dark.
■ Decrease Exposure Compensation (see page 38).
■ Clean the lens (see page 60).
■ Make sure your camera is not in Close-up mode.
■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■ Press the shutter button halfway to focus and set exposure. When the
ready light turns green, press the Shutter button completely down.
■ Place the camera on a flat, steady surface or use a tripod.
■ Turn on the flash (see page 9).
■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
■ Use Fill flash (see page 9) or change your position so light is not
behind the subject.
■ Increase Exposure Compensation (see page 38).
www.kodak.com/go/support
49
Page 56
Troubleshooting
IfTry one or more of the following
Camera does not
recognize
SD/SDHC card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.
■ Purchase a certified SD/SDHC card.
■ Format the card (see page 33).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■ Insert a card into the slot, then push to seat (see page 3).
■ Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
■ Insert a new card (see page 3), transfer pictures to the computer (see
page 44), or delete pictures (see page 15).
■ Transfer pictures to the computer (see page 44), then format the card
or internal memory (see page 33).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Camera ready light status
IfTry one or more of the following
Ready light does
not turn on and the
camera does not
work.
Ready light blinks
green.
Ready light blinks
amber.
Ready light blinks
red and camera
turns off.
■ Turn on the camera (see page 2).
■ Install new batteries (see page 1) or charge rechargeable batteries.
■ Turn camera off, then back on.
■ Camera is operating normally.
■ Wait. Resume picture taking when the light stops blinking and turns
green.
■ Install new batteries (see page 1) or charge rechargeable batteries.
50www.kodak.com/go/support
Page 57
IfTry one or more of the following
Troubleshooting
Ready light glows
steady red.
■ Transfer pictures to the computer (see page 44), delete pictures from
the camera (see page 15), switch image storage locations (see
page 30), or insert a card with available memory (see page 3).
■ Wait. Resume picture taking when the light turns off.
■ Change the image storage location to internal memory (see page 30),
or use a different card.
Ready light is off or
■ Camera is operating normally.
glows steady
green.
Camera/computer communications
IfTry one or more of the following
The computer does
not communicate
with the camera.
■ Turn on the camera (see page 2).
■ Install new batteries (see page 1) or charge rechargeable batteries.
■ Connect cable to camera and computer port (see page 44).
■ Install the software (see page 43).
■ Disconnect the USB cable. Close all open applications. Re-install the
software (see page 43).
■ Disconnect camera from the computer. Close all software applications,
reconnect camera.
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
■ Disconnect USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (see page 43).
■ Disconnect the USB cable. Close all open applications. Re-install the
software (see page 43).
drivers.)
LCD messages
IfTry one or more of the following
No images to display
■ Change image storage location setting (see page 30).
www.kodak.com/go/support
51
Page 58
Troubleshooting
IfTry one or more of the following
Memory card requires
formatting
Memory card cannot be read
(Please format memory card
or insert another card)
Internal memory requires
formatting
Internal memory cannot be
read (Please format internal
memory)
Memory card is locked (Insert
new memory card)
Memory card is unusable
(Insert new memory card)
■ Insert a new card (see page 3) or format the card (see
page 33).
Caution: Formatting a card deletes all pictures and
videos, including protected files.
■ Format the internal memory (see page 33).
Caution: Formatting deletes all pictures and videos,
including protected files. (Formatting internal memory
also deletes email addresses, and tag names. To
restore them, see the Kodak EasyShare software
Help.)
■ Insert a new card (see page 3), move the switch on the
card to unlock the card, or change the image storage
location to internal memory (see page 30).
■ Insert a new card (see page 3) or format the card (see
page 33).
High camera temperature.
(Camera will be turned off.)
Unrecognized file format
Camera error #XXXX. See
user’s guide.
Caution: Formatting a card deletes all pictures and
videos, including protected files.
■ Leave the camera off for ten minutes, then turn it back on.
If the message reappears, visit
www.kodak.com/go/z1085support and select Interactive
Troubleshooting & Repairs.
■ Transfer the picture to the computer (see page 44), or
delete it (page 15).
■ Turn camera off, then back on. If the message reappears,
visit www.kodak.com/go/z1085support and select
Interactive Troubleshooting & Repairs.
52www.kodak.com/go/support
Page 59
7Getting help
Helpful links
Camera
Email, write, or phone customer supportwww.kodak.com/go/contact
Get support for your product (FAQs, arrange for
repairs, troubleshooting information, etc.)
Purchase camera accessories (camera docks,
printer docks, lenses, cards, etc.)
Download the latest camera firmware and
software
See online demonstrations of your camerawww.kodak.com/go/howto
www.kodak.com/go/z1085support
www.kodak.com/go/z1085accessories
www.kodak.com/go/z1085downloads
Software
Get information on EasyShare softwarewww.kodak.com/go/easysharesw (or click
the Help button in EasyShare software)
Get help with the Windows operating system and
working with digital pictures
www.kodak.com/go/pcbasics
Other
Get support for other cameras, software, accessories www.kodak.com/go/support
Get information on Kodak EasyShare printer dockswww.kodak.com/go/printerdocks
Get information on Kodak inkjet productswww.kodak.com/go/inkjet
Optimize your printer for truer, more vibrant colorswww.kodak.com/go/onetouch
Register your camerawww.kodak.com/go/register
www.kodak.com/go/support 53
Page 60
Getting help
NOTE: If you have questions concerning this product, you may speak with Kodak customer support.
Australia1800 267 588Netherlands020 346 9372
Austria0179 567 357New Zealand0800 880 120
Belgium02 713 14 45Norway23 16 21 33
Brazil0800 891 42 13Philippines1 800 1 888 9600
Canada1 800 465 6325
China800 820 6027Portugal021 415 4125
Czech Republic 00 800 56325000
Denmark3 848 71 30Singapore800 6363 036
Ireland01 407 3054
Finland0800 1 17056Spain91 749 76 53
France01 55 1740 77Sweden08 587 704 21
Germany069 5007 0035Switzerland044 838 53 51
Greece
Hong Kong800 901 514Thailand001 800 631 0017
00800 44140775
Poland 00800 4411625
Russia8 495 929 9166
Slovakia00 800 56325000
Taiwan0800 096 868
Hungary06 80 456 325Turkey 00800 448827073
India
91 80 41374555
United Kingdom0870 243 0270
(toll free 000800 440 1227)
Italy02 696 33452United States1 800 235 6325
Japan03 5540 9002International Toll Line +44 131 458 6714
Color modes—High Color, Natural Color, Low Color, Black & White, Sepia
Sharpness—High, Normal, Low
Video size—HDV (1280 x 720 @ 30 fps); VGA (640 x 480 @ 30 fps); QVGA (320 x
240 @ 30 fps)
Video output—NTSC or PAL selectable
Power—AA lithium (non-rechargeable; not alkaline); 1 Kodak lithium digital
camera battery CRV3 (non-rechargeable); 1 Kodak Li-Ion rechargeable digital camera
battery KLIC-8000; 3V AC adapter; Kodak EasyShare docks
Burst mode—Maximum 3 pictures @ 1.7 fps; Auto Exposure, Auto Focus, Auto
White Balance executed for first shot only
Self-timer—2 seconds, 10 seconds, or 2-shot
Microphone—Yes
Speaker—Yes
56www.kodak.com/go/support
Page 63
Output image size—
Appendix
Smart Capture Mode
10.0 MP (4:3): 3648 x 2736 pixels
8.9 MP (3:2): 3648 x 2432 pixels
7.5 MP (16:9): 3648 x 2064 pixels
5.0 MP (4:3): 2592 x 1944 pixels
4.5 MP (3:2): 2592 x 1728 pixels
3.8 MP (16:9): 2592 x 1456 pixels
3.1 MP (4:3): 2048 x 1536 pixels
2.8 MP (3:2): 2048 x 1360 pixels
2.4 MP (16:9): 2048 x 1152 pixels
Other Modes
10.0 MP (4:3): 3648 x 2736 pixels
8.9 MP (3:2): 3648 x 2432 pixels
7.5 MP (16:9): 3648 x 2064 pixels
5.0 MP (4:3): 2592 x 1944 pixels
3.1 MP (4:3): 2048 x 1536 pixels
2.2 MP (3:2): 1800 x 1200 pixels
2.1 MP (16:9): 1920 x 1080 pixels
1.2 MP (4:3): 1280 x 960 pixels
Communication with computer—USB 2.0 high speed (PIMA 15740 protocol) via
USB cable model U-8; USB 2.0 full speed (PIMA 15740 protocol) via compatible
EasyShare dock
PictBridge compatibility—Yes
Auto power off—Selectable 1, 3, 5, 10 minutes
Sound tag—Yes
Date stamp—Yes
Tripod mount—1/4 inch
Size—89.5 x 64.3 x 39 mm (3.5 x 2.5 x 1.5 in.) @ power off
Weight—164 g (5.8 oz) without battery or card
Operating temperature—32-104
°F (0-40°C)
www.kodak.com/go/support
57
Page 64
Appendix
Storage capacities
The LCD displays the number of pictures (or minutes/seconds of video) remaining. For
average SD card capacities, visit www.kodak.com/go/SDcapacities. Actual storage
capacity varies depending on subject composition, card size, and other factors. You
may be able to store more or fewer pictures and videos.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/z1085downloads.
Important safety instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. Kodak AC adapters
and battery chargers are intended for indoor use only. The use of controls,
adjustments, or procedures other than those specified herein may result
in exposure to shock and/or electrical or mechanical hazards. If the LCD
breaks, do not touch the glass or liquid. Contact Kodak customer support.
■ The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit www.kodak.com/go/accessories.
■ Use only a USB-certified computer equipped with a current-limiting motherboard.
Contact your computer manufacturer if you have questions.
■ If using this product in an airplane, observe all instructions of the airline.
■ When removing the battery, allow it to cool; it may be hot.
■ Follow all warnings and instructions supplied by the battery manufacturer.
■ Use only batteries approved for this product to avoid risk of explosion.
■ Keep batteries out of the reach of children.
58www.kodak.com/go/support
Page 65
Appendix
■ Do not allow batteries to touch metal objects, including coins. Otherwise, a battery
may short circuit, discharge energy, become hot, or leak.
■ Do not disassemble, install backward, or expose batteries to liquid, moisture, fire,
or extreme temperature.
■ Remove the battery when the product is stored for an extended period of time. In
the unlikely event that battery fluid leaks inside the product, contact Kodak
customer support.
■ In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.
■ Dispose of batteries according to local and national regulations. Visit
www.kodak.com/go/kes.
■ Do not charge non-rechargeable batteries.
For more information on batteries, see www.kodak.com/go/batterytypes.
Battery life
■ CRV3 lithium battery: 350–450 pictures
■ AA (2) lithium batteries: 200–300 pictures
■ KLIC-8000 rechargeable digital camera battery (per charge): 200–300 pictures
Battery life per CIPA testing method using 128 MB SD card. Approximate number of
pictures in Smart Capture mode. Actual life may vary based on usage.
Extending battery life
■ Use power-saving features (see page 32).
■ Limit activities that quickly deplete battery power (reviewing pictures on the
camera, excessive use of the flash).
■ Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean,
dry cloth before loading batteries in the camera.
www.kodak.com/go/support
59
Page 66
Appendix
■ Battery performance is reduced at temperatures below 41° F (5° C). When using
your camera in cold weather, carry spare batteries and keep them warm. Do not
discard cold batteries that do not work; when they return to room temperature,
they may be usable.
Care and maintenance
■ If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
■ For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or the
Kodak Web site at www.kodak.com/go/z1085support.
Limited warranty
Kodak warrants Kodak consumer electronic products and accessories (“Products”),
excluding batteries, to be free from malfunctions and defects in both materials and
workmanship for one year from the date of purchase. Retain the original dated sales
receipt. Proof of the date of purchase will be required with any request for warranty
repair.
60www.kodak.com/go/support
Page 67
Appendix
Limited warranty coverage
Warranty service is only available from within the country where the Products were
originally purchased. You may be required to ship Products, at your expense, to the
authorized service facility for the country where the Products were purchased. Kodak
will repair or replace Products if they fail to function properly during the warranty
period, subject to any conditions and/or limitations stated herein. Warranty service
will include all labor as well as any necessary adjustments and/or replacement parts. If
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the
purchase price paid for the Product provided the Product has been returned to Kodak
along with proof of the purchase price paid. Repair, replacement, or refund of the
purchase price are the sole remedies under the warranty. If replacement parts are
used in making repairs, those parts may be remanufactured, or may contain
remanufactured materials. If it is necessary to replace the entire Product, it may be
replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90
days after the date of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak's control. This warranty
does not apply when failure is due to shipping damage, accident, alteration,
modification, unauthorized service, misuse, abuse, use with incompatible accessories
or attachments (such as third party ink or ink tanks), failure to follow Kodak's
operation, maintenance or repacking instructions, failure to use items supplied by
Kodak (such as adapters and cables), or claims made after the duration of this
warranty.
www.kodak.com/go/support
61
Page 68
Appendix
Kodak makes no other express or implied warranty for this product, and disclaims the
implied warranties of merchantability and fitness for a particular purpose. In the event
that the exclusion of any implied warranty is ineffective under the law, the duration of
the implied warranty will be one year from the purchase date or such longer period as
required by law. The option of repair, replacement, or refund is Kodak's only
obligation. Kodak will not be responsible for any special, consequential or incidental
damages resulting from the sale, purchase, or use of this product regardless of the
cause. Liability for any special, consequential or incidental damages (including but not
limited to loss of revenue or profit, downtime costs, loss of the use of the equipment,
cost of substitute equipment, facilities or services, or claims of your customers for such
damages resulting from the purchase use or failure of the Product), regardless of
cause or for breach of any written or implied warranty is expressly disclaimed.
Your rig h t s
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of
this warranty may be different. Unless a specific Kodak warranty is communicated to
the purchaser in writing by a Kodak company, no warranty or liability exists beyond
any minimum requirements imposed by law, even though defect, damage, or loss may
be by negligence or other act.
62www.kodak.com/go/support
Page 69
Appendix
Regulatory compliance
FCC compliance and advisory
Kodak EasyShare Z1085 IS zoom digital camera
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) reorient or relocate the
receiving antenna; 2) increase the separation between the equipment and the
receiver; 3) connect the equipment to an outlet on a circuit different from that to
which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been provided with the
product or specified additional components or accessories elsewhere defined to be
used with the installation of the product, they must be used in order to ensure
compliance with FCC regulation.
Australian C-Tick
N137
www.kodak.com/go/support
63
Page 70
Appendix
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian
ICES-003.
Observation des normes-Classe B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
FCC and Industry Canada
This device complies with Industry Canada RSS-210 and FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Waste Electrical and Electronic Equipment labeling
EU: It is the final user's responsibility to discard this equipment into an approved,
segregated collection scheme to enable its suitable treatment/disposal and to
improve human/environmental protection. For more information, see your retailer,
local authority, or www.kodak.com/go/recycle. (Product weight: 164 g.)
Korean Class B ITE
VCCI Class B ITE
64www.kodak.com/go/support
Page 71
China RoHS
Russian GOST-R
Appendix
Eastman Kodak Company
Rochester, NY 14650
AIO-40
MPEG-4
Use of this product in any manner that complies with the MPEG-4 visual standard is
prohibited, except for use by a consumer engaging in personal and non-commercial
activities.
www.kodak.com/go/support
65
Page 72
Index1
A
A/V out, 23
about picture, video, 14
about this camera, 33
accessories, 44
battery, 59
buying, 53
printer dock, 45
SD/SDHC card, 3
advanced digital zoom, 32
AF control, 29
aperture, 35
appendix, 55
auto
enhancement, 18
flash, 9
focus control, 16
focus framing marks, 5
OK, ii
review, 13
shutter, i
telephoto, ii
wide angle, ii
zoom, 8
C
cable
audio/video, 23
USB, 44
camera sounds, 32
candle light, 7
capture frame grid, 31
caring for your camera, 60
clock, setting, 2
color mode, 28
compatibility, dock, 47
continuous AF, 29
B
backlight, 7
battery
compartment, ii
life, 59
loading, 1
beach, 7
bookmarks, 20
burst, using, 37
button
burst, 37
delete, ii, 5
flash, 9
66www.kodak.com/go/support
copy pictures
card to memory, 25
memory to card, 25
to computer, 43
cropping pictures, 18
customer support, 53, 54
D
date setting, 2
date stamp, 31
DC-in, ii
delete button, ii
deleting
Page 73
Index
during quickview, 5
pictures/video, 15
protecting pictures, videos, 15
digital zoom, using, 8
displaying slide show, 21
disposal, recycling, 60, 64
dock compatibility, 47
doing more with your camera, 27
download pictures, 43
about this camera, 33
advanced digital zoom, 32
AF control, 29
auto-focus, 16
camera sounds, 32
capture frame grid, 31
color mode, 28
date and time, 2
date stamp, 31
video out, 32
video size, 16, 28
white balance, 29
sharing pictures, videos, 39
sharpness, 30
shutter
button, i
problems, 49
self-timer delay, 10
speed, 34
shutter speed, 35
single AF, 29
slide show