Kodak CIS-174 User Manual

CIS-174 April 1996

CURRENT INFORMATION SUMMARY

Opening Instructions for the

KODAK ADVANTIX Flash One-Time-Use Camera

Wear eye protection when opening all cameras.

Wind Off

Frame Counter

Thumbwheel

Access Hole

Shutter Button

• Check the Frame Counter window, X’s must be visible.

• Check the Access Hole, it must be black.

• If not, grip camera, press Shutter Button and turn Thumbwheel until it stops.

Remove Film

Access Hole

• Insert the punch end of the opening tool into the Access Hole.

NOTE: The film cassette door is closed only when the Access Hole is black.

• Push down until film cassette pops out.

Remove Battery

Bend Here

• Remove cardboard cover.

• Insert special tool into end slot.

• Use tool to bend cover back and remove battery.

CAUTION: T o avoid injury, use tool carefully. Do not hit camera against object to open or the film door may open and fogg the film.

©Eastman Kodak Company, 1996

Opened Camera with Film and Battery

Battery

Other

• Place in recycle bin.

• Return to Kodak for recycling.

CAUTION: This camera body contains a high voltage capacitor and circuit board. T o avoid electric shock, do not pry apart the front and back sections of camera. Remove only film and battery from their respective compartments. If sections of the camera are separated, do not touch the circuit board.

Film

Current Information Summaries provide information of limited or specific

application. Responsibility for judging the timeliness and applicability

of the information to a specific photographic use rests with the end user.

CIS-174 Opening Instructions for the KODAK ADVANTIX Flash One-Time-Use Camera

Consumer Imaging

EASTMAN KODAK COMPANY • ROCHESTER, NY 14650

Kodak, Advantix, and the

Advanced Photo System symbol and logotype are trademarks.

Minor Revision 12-98

Printed in U.S.A.