Kodak CIS-169 User Manual
CIS-169
April 1995
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
Wind off
1
Shutter Button
Thumbwheel
• Check the frame counter window.
• X’s must be visible.
• If not, grip camera, press shutter button, and
turn thumbwheel untill film is fully rewound.
Open Film Door
2
Remove Film
3
• Use tool to bend cover back and remove film.
Remove Battery
4
Opened Camera with film and battery removed.
• Insert special tool into end slot (as shown).
CAUTION: This camera body
contains a high voltage capacitor
and circuit board. T o avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film and battery from their
respective compartments. If sections
of the camera are separated, do not
touch the circuit board.
Battery
• Repeat the same steps at opposite end of
camera to remove battery.
• Place in recycle bin.
• Return to Kodak for recycling.
5
CAUTION: T o avoid injury, use tool
carefully .
©Eastman Kodak Company, 1996
Exposed Film
application. Responsibility for judging the timeliness and applicability of the
CIS-169
Opening Instructions for the
KODAK MAX Flash
One-Time-Use Camera
Current Information Summaries provide information of limited or specific
information to a specific photographic use rests with the end user.
Consumer Imaging
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650
Kodak and Max are trademarks.
Minor Revision 12-98
Printed in U.S.A.
Loading...