Page 1
User Manual
Page 2
SETTING UP YOUR CAMERA
Setting Up Your Camera For the First
Time!
1. From your smartphone, download the
iSecurity+ app from the Apple App Store
or the Google Play store.
2. Connect your KODAK Video Monitor to
the supplied AC power adaptor and plug
the cord into an electrical outlet.
3. Wait up to 2 minutes for the side LED to
flash red and green.
4. Enable Wi-Fi on your smartphone, as
well as your home Wi-Fi network.
5. Open the Wi-Fi settings on your
smartphone and connect to the network
“CFH-V20XXXX”, where XXXX are the last
4 digits of the camera’s MAC ID as seen
on the back of your Camera.
6. Once your smartphone establishes
connection to “CFH-V20XXXX”, launch
the iSecurity+ app. When prompted,
click “Yes” to setup your camera. The
Setup Wizard will guide you through the
remainder of the setup process.
Setting Up Additional Cameras on the
Same Account!
1. Follow the same instructions in “Setting
Up Your Camera For the First Time”.
2. In the Setup Wizard, when prompted to
create a new account, simply choose
“Use Existing”.
3. Enter the credentials of your existing
account to complete setup of your
additional Camera.
Setting up your Camera again!
If you change your home router, you will
need to set up your Camera again.
1. Tap the button on the side of your
Camera to put it in Setup Mode.
2. Follow steps 3 – 6 in “Setting up your
Camera for the first time”.
Factory resetting your Camera!
1. Press and hold the button on the side of
your Camera for 15 seconds.
2. Once the LED lights flash, release the
button.
You will need to set up your Camera again.
USING YOUR CAMERA
Accessing From Your Mobile Device!
Launch the iSecurity+ app. Click on your
Camera’s name to start live video.
Once in the live view, there are a few actions
you can take:
Take a snapshot of the live video.
Snapshots are stored in your
smartphone’s Gallery.
Record live video. Videos are stored
in your smartphone’s Gallery.
Turn on audio to accompany your live
video stream.
Hold to initiate audio talkback. Your
audio must be turned on to do so.
You can pinch your smartphone’s screen to
zoom in and out, and swipe your screen to
pan and tilt.
Accessing From Your Computer!
Go to https://app.isecurityplus.com. Click on
your Camera’s name to start live video.
Page 3
CONFIGURING YOUR CAMERA
You can configure your Camera to fit your
needs.
Accessing From Your Mobile Device!
Launch the iSecurity+ app and click the
Gear Icon next to your Camera’s name.
Accessing From Your Computer!
Go to https://app.isecurityplus.com. Click on
“Settings” underneath your Camera’s name.
Sending an Invitation
1. Click “Invite Friends”
2. Type in the email address of the person
you would like to share your Camera to.
3. Click the arrow to send the invite.
4. Your family or friend will receive an email
to create an iSecurity+ account or login
to his/her existing account.
Camera Name Change the name of your
Camera.
Time Zone Change the time zone of
your Camera. This will
change the date format of
your motion-triggered
recordings.
Rotation Flip the live video stream
vertically.
Night Vision On: Night vision will always
be on.
Off: Night vision will always
be off.
Auto: Night vision will turn
on automatically when the
environment gets too dark.
Microphone Allows you to turn on the
audio feed to accompany
your live video.
Speaker Volume of audio talkback.
Auto Adjust Automatically adjusts the
video quality and frame
rate based on your
available bandwidth.
SHARING YOUR CAMERA
You can share your Camera’s live video
stream to your family and friends.
Sharing From Your Mobile Device!
Launch the iSecurity+ app and click the
Gear Icon next to your Camera’s name.
Page 4
Sharing Your Camera
1. Once your family or friend has accepted
your invitation, his/her name should
appear under “Family and Friends”.
2. Under “Status”, select “Viewable by
Friends”.
3. Under “Family and Friends”, check the
box next to the person you are sharing
your camera to.
Sharing From Your Computer!
Go to https://app.isecurityplus.com. Click on
“Sharing” underneath your Camera’s name.
Sending an Invitation
1. Under “Invite”, type in the email address
of the person you would like to share
your Camera to.
2. Click “Send”.
3. Your family or friend will receive an email
to create an iSecurity+ account or login
to his/her existing account.
Sharing Your Camera
1. Once your family or friend has accepted
your invitation, his/her name should
appear under “Viewers”.
2. Under “Status”, select “Shared”.
3. Under “Viewers”, check the box next to
the person you are sharing your Camera
to.
UPDATING YOUR CAMERA’S FIRMWARE
At times, we will provide a new firmware for
your Camera.
Updating From Your Mobile Device!
1. Launch the iSecurity+ app and click the
Gear Icon next to your Camera’s name.
2. If there is a new firmware available, you
will see “New Firmware Available” under
“Firmware”.
3. Click on “Show Me What’s New”.
4. On the next page, click on “Update
Firmware” to proceed with your firmware
update.
Updating From Your Computer!
1. Go to https://app.isecurityplus.com.
Click on “Settings” underneath your
Camera’s name.
2. If there is a new firmware available, you
will see “Update to version X.X.X.X”
under “Firmware”.
3. Click on “Update to version X.X.X.X” to
proceed with your firmware update.
Note: Your camera will go offline for up to 5
minutes, while the upgrade takes place.
Page 5
ENABLING 1-DAY CLOUD STORAGE
Your KODAK CFH-V20 comes with free
lifetime 1-day cloud storage of motiontriggered events.
Enabling Recording From Your Mobile
Device!
1. Launch the iSecurity+ app and click the
Gear Icon next to your Camera’s name.
2. Turn on “Event Recording” under “Motion
Detection”.
Viewing Recordings From Your Mobile
Device!
1. Launch the iSecurity+ app and click on
the “Events” tab on the bottom task bar.
2. Click on your Camera’s name.
3. Click on the event you would like to view.
Enabling Recording From Your
Computer!
1. Go to https://app.isecurityplus.com.
Click on “Services” underneath your
Camera’s name.
2. Turn on “Free Event Recording”.
Viewing Recordings From Your
Computer!
1. Go to https://app.isecurityplus.com.
Click on “Events” in the top navigation
bar.
2. Click on the event you would like to view.
If you have multiple cameras, you can filter
the events based on the Camera’s name.
Click on the filter icon to the left of the
screen, and select your desired Camera(s).
STARTING YOUR 14-DAY CLOUD STORAGE TRIAL
While your KODAK CFH-V20 comes with
free lifetime 1-day cloud storage of motiontriggered events, you can also enable a 30-
day trial period of 14-Day Cloud Storage with
Smart Detection.
Once your 30-day trial period expires,
you can continue to enjoy free lifetime
1-day cloud storage.!
The learn more about our premium plans,
visit:
https://www.connectedfamilyhome.com/
purchase/storage-plans.
Enabling the Trial From Your Mobile
Device!
1. Launch the iSecurity+ mobile app and
click on the “Events” tab on the bottom
task bar.
2. Click on “Free Trial” next to your Camera’s
name.
Enabling the Trial From Your Computer!
1. Go to https://app.isecurityplus.com.
Click on “Subscriptions” in the top
navigation bar.
2. Click on “Would you like to start your
trial?”
Page 6
LED INDICATORS
For troubleshooting help, visit our FAQ section at
https://kodakconnectedfamilyhome.zendesk.com or contact us directly at
support@isecurityplus.com.!
Green Connected to iSecurity+
servers.
Orange Home network connection
issue. Please check your
home router or modem.
Flashing
Orange
Not connected to the
internet. If you have not
set up your camera,
please follow the setup
instructions in this manual.
If your Camera was
operating normally, please
check your outgoing
internet connection.
Loading...