KitchenAid KSM3311, W10882391A, KSM3316 Quick Start Manual

DISCOVER MORE

AT KITCHENAID.COM/QUICKSTART

For exciting recipes, demo videos, product registration,

and more — our quick start page has what you need

to help you get the most from your new product.

GET

READY

KitchenAid.com | KitchenAid.ca | USA: 1.800.541.6390 | Canada: 1.800.807.6777

VIDEOSGUIDES

SUPPORT

REGISTERRECIPES

®/™ © 2016 KitchenAid. All rights reserved. KITCHENAID and the design of the

Stand Mixer are trademarks in the U.S. and elsewhere. Used under license in Canada.

GET STARTED

QUICK START GUIDE

In a few easy steps you’ll be on your way to enjoying something delicious!

For complete instructions and videos, go online to kitchenaid.com/quickstart.

1. Check to be sure that the Stand Mixer

is unplugged and the speed control is
turned to “0”.
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction.

2. Raise the motor head: Slide the locking

lever to the unlock position and lift the
motor head. Once lifted, ensure the
locking lever is in the lock position to
keep the motor head up.

3. Attach the bowl: Place the bowl on the

bowl clamping plate and gently turn it in
a clockwise direction to lock it into place.

4. Attach any accessory: Slip the accessory

onto the beater shaft and press upward
as far as possible. Turn the accessory
counterclockwise to hook the accessory
over the pin on the shaft.

W10882391A KSM3311, KSM3316
04/16

5. Lower the motor head: Slide the

locking lever to the unlock position
and guide the motor head down. Make
sure motor head is completely down,
then slide the locking lever to the lock
position. Before mixing, test lock by
attempting to raise motor head.

ACCESSORY USE TO MIX

FLAT BEATER*
FLEX EDGE BEATER*

Cookie dough,

cake batter,
guacamole,

pulled meats

WIRE WHIP

Whipped cream,

egg whites,

meringue

DOUGH HOOK

Bread dough

*Select models only and accessories sold separately