KitchenAid KMBP100EBS01 Installation Guide

INSTALLATION INSTRUCTIONS

27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC BUILT-IN

CONVECTION MICROWAVE OVEN

INSTRUCTIONS D’INSTALLATION

FOUR À MICRO-ONDES ENCASTRÉ ÉLECTRIQUE

À CONVECTION DE 27" (68,6 CM) ET 30" (76,2 CM)

Table of Contents/Table des matières

BUILT-IN MICROWAVE OVEN SAFETY .................................. 1

INSTALLATION REQUIREMENTS .......................................... 2

Tools and Parts .................................................................... 2

Location Requirements ....................................................... 2

Electrical Requirements ........................................................ 3

INSTALLATION INSTRUCTIONS ........................................... 4

Spacer Kit Installation .......................................................... 4

Prepare Built-In Microwave Oven ......................................... 4

Make Electrical Connection.................................................. 5

Install Microwave Oven ........................................................ 5

Complete Installation ........................................................... 6

SÉCURITÉ DU FOUR À MICRO-ONDES ENCASTRÉ ........... 7

EXIGENCES D’INSTALLATION .............................................. 7

Outils et pièces .................................................................... 7

Exigences d’emplacement .................................................. 7

Spéccations électriques ..................................................... 9

INSTRUCTIONS D’INSTALLATION ..................................... 10

Installation de la trousse d’entretoise ................................. 10

Préparation du four à micro-ondes encastré ..................... 10

Raccordement électrique ................................................... 10

Installation du four à micro-ondes...................................... 11

Achever l’installation ......................................................... 12

BUILT-IN MICROWAVE OVEN SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

follow

W11091153A

INSTALLATION REQUIREMENTS

B

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.

Tools Needed

■ Phillips screwdriver

■ Flat-blade screwdriver

■ Measuring tape

■ Level

Parts Needed

■ A UL listed or CSA approved conduit connector

■ UL listed wire connectors

Parts Needed - Flush Installation

■ W10752697 Stainless steel flush installation kit for 30"

(76.2 cm) models

■ W10752698 Stainless steel flush installation kit for 27"

(68.6 cm) models

■ W10839402 Limited edition black flush installation kit

for 30" (76.2 cm) models

To order, see the “Assistance or Service” section of the Use
and Care Guide.

Parts Supplied

■ Drill (for wall cabinet installations)

8

■ ¹⁄

" (3 mm) drill bit (for wall

cabinet installations)

■ 1" (2.5 cm) drill bit (for wall

cabinet installations)

■ For installation above single built-in oven, the junction box

must located inside upper cabinet.

■ If you are installing the junction box on rear wall behind

the microwave oven, the junction box must be recessed
and located in the upper or lower right or left corner of the
cabinet; otherwise, the microwave oven will not fit into the
cabinet opening.

■ Microwave oven support surface must be solid, level and

flush with bottom of cabinet cutout. Floor must be able to
support a weight of 90 lbs (41.0 kg).

IMPORTANT: To avoid damage to your cabinets, check with
your builder or cabinet supplier to make sure that the materials
used will not discolor, delaminate or sustain other damage. This
oven has been designed in accordance with the requirements
of UL and CSA International and complies with the maximum
allowable wood cabinet temperatures of 194°F (90°C).

Product Dimensions

27" (68.6 cm) and 30" (76.2 cm) Microwave Ovens

A

B

E

A

A. Spacer bars (2)
B. Bottom vent (1)

8

C. ³⁄

" hex-head washer screws (4)

D. ¾" pan-head screws (4)

C

D

Check local codes. Check existing electrical supply. See
“Electrical Requirements.”

It is recommended that all electrical connections be made
by a licensed, qualified electrical installer.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■ Cabinet opening dimensions that are shown must be

used. Given dimensions provide minimum clearance with
microwave oven.

■ Recessed installation area must provide complete enclosure

around the recessed portion of the microwave oven.

■ Grounded electrical supply is required. See “Electrical

Requirements” section.

■ Electrical supply junction box should be located 3" (7.6 cm)

maximum below the support surface when the microwave
oven is installed in a wall cabinet. A 1" (2.5 cm) minimum
diameter hole should have been drilled in the left rear corner
of the support surface to pass the appliance cable through
to the junction box.

C

D

27" (68.6 cm) Models

8

A. 25³⁄

" (64.5 cm)

5

B. 18

⁄8" (47.3 cm) overall height

4

C. 26³⁄

" (68.0 cm) overall width

2

D. 21¹⁄

" (54.6 cm)

8

E. 17³⁄

" (44.1 cm)

30" (76.2 cm) Models

8

A. 28³⁄

" (72.1 cm)

5

B. 18

⁄8" (47.3 cm) overall height

4

C. 29³⁄

" (75.6 cm) overall width

2

D. 21¹⁄

" (54.6 cm)

8

E. 17³⁄

" (44.1 cm)

27" (68.6 cm) and 30" (76.2 cm) Microwave Oven Spacer Kit

A

27" (68.6 cm) Models

4

A. 26³⁄

" (67.9 cm) overall width

30" (76.2 cm) Models

A. 29³⁄4" (75.6 cm) overall width

NOTE: The microwave oven spacer kit will allow the microwave

8

oven to be installed in a 17³⁄

" to 17³⁄4" (44.1 to 45.1 cm)

maximum cutout height.
A microwave oven spacer kit is available from your dealer that

will allow the microwave oven to be installed in a 19

11

⁄16" (48.9 - 50.0 cm) maximum cutout height. Match the oven

19

1

/4" to

size to the following kits:
27" (68.6 cm) Stainless Steel - Spacer Kit W10469901
30" (76.2 cm) Stainless Steel - Spacer Kit W10469903
30" (76.2 cm) Limited Edition Black - Spacer Kit W10842584

To order, see the “Assistance or Service” section of the Use and
Care Guide.

2