Kern FKB 50K1TM, FKB 65K1M, FKB 15K0.1M, FKB 8K0.1M, FKB 65K0.5 User Manual

...

KERN & Sohn GmbH

Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com

Tel: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com

Operating instructions Precision/ compact balances and platform scales

KERN 572/573/KB/DS/FKB/FCB

Version 5.8 04/2010 GB

572/573/KB/DS/FKB/FCB-BA-e-1058

KERN 572/573/KB/DS/FKB/FCB

Version 5.8 04/2010

Operating instruction Precision/compact balances and platform scales

Table of contents:

1 MODE - MENUE .......................................................................................................3

2 Technical data .........................................................................................................4

2.1 KERN 572............................................................................................................................................. 4

2.2 KERN 573............................................................................................................................................. 7

2.3 KERN KB ............................................................................................................................................. 8

2.4 KERN DS............................................................................................................................................ 12

2.5 KERN FCB ......................................................................................................................................... 17

2.6 KERN FKB ......................................................................................................................................... 19

3 Fundamental information (general) .....................................................................22

3.1 Intended use...................................................................................................................................... 22

3.2 Inappropriate use ............................................................................................................................. 22

3.3 Guarantee .......................................................................................................................................... 22

3.4 Monitoring the test substances ...................................................................................................... 22

4 Fundamental safety information..........................................................................23

4.1 Observe the information in the operating instructions ................................................................ 23

4.2 Staff training...................................................................................................................................... 23

5 Transport and storage ..........................................................................................23

5.1 Acceptance check ............................................................................................................................ 23

5.2 Packaging.......................................................................................................................................... 23

6 Unpacking, installation and commissioning ......................................................23

6.1 Place of installation, place of use................................................................................................... 23

6.2 Unpacking ......................................................................................................................................... 24

6.2.1 Installation........................................................................................................................................... 24

6.3 Mains supply ..................................................................................................................................... 24

6.4 Battery operation FKB...................................................................................................................... 24

6.5 Connecting peripheral equipment .................................................................................................. 24

6.6 Initial start-up .................................................................................................................................... 24

6.7 Adjustment ........................................................................................................................................ 25

6.8 Adjusting (go to 7.2.6)...................................................................................................................... 25

6.8.1 Adjusting for verification (KERN 573; FKB-M; KB-NM; FCB-M; DS-M) ............................................. 25

6.9 Verification ........................................................................................................................................ 26

7 Operation ...............................................................................................................27

7.1 Display control panel ....................................................................................................................... 27

7.2 Operation........................................................................................................................................... 28

7.3 Display background illumination.................................................................................................... 34

7.4 Interface RS 232 C ............................................................................................................................ 34

7.5 RS 232 C Data output via interface RS 232 C ................................................................................ 35

7.5.1 There are 5 methods for the data output via RS 232 C ..................................................................... 35

7.5.2 Description of the data transfer .......................................................................................................... 35

7.5.3 Numerator........................................................................................................................................... 36

7.6 Printer ................................................................................................................................................ 36

7.7 Underfloor weighing......................................................................................................................... 36

8 Maintenance, upkeep, disposal ...........................................................................37

8.1 Cleaning............................................................................................................................................. 37

8.2 Maintenance, upkeep ....................................................................................................................... 37

8.3 Disposal............................................................................................................................................. 37

9 Troubleshooting....................................................................................................37

10 Declaration of conformity

.....................................................................................38

572/573/KB/DS/FKB/FCB/PCB-BA-e-1058

1 MODE - MENUE

Important!

The modified settings - as well as the adjustment - must be stored when switching-off, via the ON/OFF button.

572/573/KB/DS/FKB/FCB-BA-e-1058

2 Technical data

2.1 KERN 572

KERN 572-30 572-31 572-32 572-33

Readability (d) 0.001 g 0.001 g 0.001 g 0.01 g

Weighing range (max) 241 g 301 g 421 g 1610 g

Taring range (subtractive) 241 g 301 g 421 g 1610 g

Reproducibility 0.001 g 0.001 g 0.001 g 0.01g

Linearity ± 0.003 g ± 0.005 g ± 0.005 g ± 0.03 g

Smallest piece weight 0.001 g 0.001 g 0.001 g 0.01 g

Adjustment points 50/100/

200/240 g

Recommended adjusting weight F1 (not supplied)

Humidity of air max. 80% rel. (non-condensing)

Stabilization time (typical) 3 sec.

Permitted environmental temperature

Housing (B x D x H) mm 180 x 310 x 90

Vibration filter yes

Weighing plate stainless steel mm

Units see menu

Weight kg (net) 2.3 2.3 2.3 2.3

Data interface yes (RS232)

200 g 200 g +100 g 200 g + 200 g 1 kg + 500 g

Ø 106 Ø 106 Ø 106 Ø 150

50/100/

200/300 g

+10 °C ... + 40 °C

100/200/

300/400 g

0.5/1.0/

1.5/1.6 kg

572/573/KB/DS/FKB/FCB/PCB-BA-e-1058

KERN 572-35 572-37 572-39 572-43

Readability (d) 0.01 g 0.01 g 0.01 g 0.1 g

Weighing range (max) 2410 g 3010 g 4210 g 10100 g

Taring range (subtractive) 2410 g 3010 g 4210 g 10100 g

Reproducibility 0.01 g 0.01 g 0.01 g 0.1g

Linearity ± 0.03 g ± 0.05 g ± 0.05 g ± 0.3 g

Smallest piece weight 0.01 g 0.01 g 0.01 g 0.1 g

Adjustment points 0.5/1.0/

2.0/2.4 kg

Recommended adjusting weight F1 (not supplied)

Humidity of air max. 80% rel. (non-condensing)

Stabilization time (typical) 3 sec.

Permitted environmental temperature

Housing (B x D x H) mm 180 x 310 x 90

Vibration filter yes

Weighing plate stainless steel mm

Units see menu

Weight kg (net) 2.3 2.3 2.3 2.7

Data interface yes (RS232)

2 kg 2 kg + 1 kg 2 kg + 2 kg 10 kg

Ø 150 Ø 150 Ø 150 160 x 200

1.0/1.5/

2.0/3.0 kg

+10 °C ... + 40 °C

1.0/2.0/

3.0/4.0 kg

2/5/10 kg

572/573/KB/DS/FKB/FCB-BA-e-1058

KERN 572-45 572-49 572-55 572-57

Readability (d) 0.05 g 0.1 g 0.05 g 0.1 g

Weighing range (max) 12100 g 16100 g 20100 g 24100 g

Taring range (subtractive) 12100 g 16100 g 20100 g 24100 g

Reproducibility 0.05 g 0.1 g 0.05 g 0.1g

Linearity ± 0.15 g ± 0.3 g ± 0.25 g ± 0.3 g

Smallest piece weight 0.05 g 0.1 g 0.05 g 0.1 g

Adjustment points 2/5/10/12 kg 5/10/15/16 kg 5/10/15/20 kg 5/10/15/20/24 kg

Recommended adjusting weight F1 (not supplied)

Humidity of air max. 80% rel. (non-condensing)

Stabilization time (typical) 3 sec.

Permitted environmental temperature

Housing (B x D x H) mm 180 x 310 x 90

Vibration filter yes

Weighing plate stainless steel mm

Units see menu

Weight kg (net) 2.7 2.7 2.7 2.7

Data interface yes (RS232)

10 kg 10 kg + 5 kg 20 kg 20 kg

+10 °C ... + 40 °C

160 x 200 160 x 200 160 x 200 160 x 200

572/573/KB/DS/FKB/FCB/PCB-BA-e-1058

2.2 KERN 573

KERN 573-34NM 573-36NM 573-46NM 573-56NM

Accuracy class

Readability (d) 0.01 g 0.01 g 0.1 g 0.1 g

Verification value (e) 0.1 g 0.1 g 1 g 1 g

Weighing range (max) 650 g 2000 g 6500 g 20000 g

Minimum load (Min) 0.5 g 0.5 g 5 g 5 g

Taring range (subtractive) 650 g 2 000 g 6500 g 20000 g

Reproducibility 0.01 g 0.01 g 0.1 g 0.1g

Linearity ± 0.03 g ± 0.03 g ± 0.3 g ± 0.3 g

Smallest piece weight 0.01 g 0.01 g 0.1 g 0.1 g

Adjustment points 200g/500g/600g 500g/1000g/

Recommended adjusting weight F1 (not supplied)

Humidity of air max. 80% rel. (non-condensing)

Stabilization time (typical) 3 sec.

Permitted environmental temperature

Housing (B x D x H) mm 180 x 310 x 90

Vibration filter yes

Weighing plate stainless steel mm

Units g, kg g, kg g, kg g, kg

Weight kg (net) 2.3 2.3 2.7 2.7

Data interface yes (RS232)

II II II II

2/5/6 kg 5/10/20 kg

2 000g

600 g / F1 2 kg / F1 5 kg / F2 20 kg / F1

+10 °C ... + 30 °C

Ø 150 Ø 150 160 x 200 160 x 200

572/573/KB/DS/FKB/FCB-BA-e-1058

+ 15 hidden pages