Kenwood TrueX 72X, TrueX 62X, TrueX 42X, TrueX 52X Quick Install Manual

14-6, 1-chome, Dogenzaka, Shibuya-ku, Tokyo, 150-8501 Japan

Tel: [phone] • Fax: [phone]

http://www.kenwoodcorp.com

1701 Junction Court, Suite 100 • San Jose, CA., USA 95112

Tel: [phone] • Fax: [phone]

Toll-Free: 1-888-730-4206

http://www.kenwoodtech.com

BLK

72X and 62X TrueX™CD-ROM Drive

Congratulations on selecting the fastest drive on earth!

Simply follow the quick installation steps in this guide and the 72X or 62X

TrueX CD-ROM drive will take you to the next level of CD-ROM performance.

Thanks for choosing KENWOOD.

Part No. UCR5023

BLK

TURN THE POWER OFF

A) Configure drive Master/Slave jumper settings.

NOTE: This Quick Install Guide is for

experienced users only!

For less experienced users, please refer to the

installation sections of your User’s Guide.

CD-ROM Master/Slave

Channel Devices Connected Jumper Configuration

Primary Main hard disk connected

(always set to MASTER)

Slave

Secondary No devices connected Master

Secondary A single device connected as the MASTER Slave

Primary No IDE hard disk drive present (HDD is SCSI,

Fibre Channel, etc.)

Master

Tertiary (if available)* No devices connected Master

*NOTE: Some add-in boards like sound cards have a single EIDE channel available. If this is your only
option, please consult your add-in board documentation regarding its use.

INSTALL YOUR KENWOOD 72X OR 62X TRUEX CD-ROM DRIVE
INTO AN AVAILABLE 5.25" HALF-HEIGHT DRIVE BAY

INSTALLATION
COMPLETED!

Congratulations—your Kenwood
drive should be successfully
installed. If there are problems
accessing the drive, refer to the
Troubleshooting section in your
User’s Guide, or on our web
site at www.kenwoodtech.com.
If you are still having problems,
please call our technical support center at 1-888-730-4206

IDE cable

Audio connector

Power cable

CONNECT CABLES TO THE KENWOOD DRIVE

Your Kenwood drive will
automatically be detected
by Windows® 95
or higher.