TM-V7E(BL)
FM DUAL BANDER
Experience high-performance mobile communications
Experience high-performance mobile communications
with exquisite ease of operation: Kenwood’s distinctive
with exquisite ease of operation: Kenwood’s distinctive
TM-V7E(BL) FM dual bander (144MHz/430MHz).
TM-V7E(BL) FM dual bander (144MHz/430MHz).
Mobile Contact: Crystal-Clear Commun
Dual-mode reversible LCD
The blue LCD panel, which displays dotmatrix characters — can be switched
between positive and negative display
modes to ensure optimum visibility in all
conditions. Also, the large control panel
(51.5 x 105 mm) features four multifunction keys — with key function display —
for improved operating ease.
“Five-in-one” programmable
memory
The TM-V7E(BL) has a multiple “personality” to suit different conditions. Its programmable memory can store five entire
operating profiles, ready for instant recall
at the push of a button. Each profile
includes such settings as positive/negative display mode, dimmer level, frequency range, and memory mode.
Dual receive on same band (f2)
In addition to simultaneous receive on
VHF and U HF bands, the TM-V7E(BL)
can receive two frequencies on the same
band. Monoband use is also possible.
Up to 28 0 multi-function memory
channels
There’s capacity as well as versatility: up
to 280 memory channels for storing
important data — transmit and receive
frequencies (independently), frequency
step, tone frequency, etc. (180 channels
when using Memory Name function)
Memory Name function
For greater convenience, you can
choose to identify each channel with up
to 7 alphanumeric characters. In this
mode, the number of memory channels
available is 180.
Multi-scan functions
Full band and program band scans,
memory scan with memory channel lockout, MHz scan and call scan are all available. For each band there are TO (timeoperated) and CO (carrier-operated)
scan stop modes.
Visual scan with pause
Visual scan display
By automatically checking above and
below the frequency currently in use,
and graphing the results on the LCD
(147 channels max.), this new feature is
convenient for searching out open
channels.
DTSS selective calling with page
function
Built-in DTSS (Dual-Tone Squelch
System) allows DTMF access: the
squelch is opened only when a specific
3-digit code has been received. The
page function alerts you to incoming
calls and opens the squelch if the receiver has been programmed to accept a
DTMF tone group. And even during
normal reception (squelch open), the
TM-V7E can be on the alert for a predetermined code.
Built-in CTCS S encoder/decoder
The CTCSS (Continuous Tone Coded
Squelch System) encoder/decoder enables operation of the 38 E IA-standard
CTCSS subtone frequencies.
Auto simplex checker
ASC will automatically check whether it
is possible to switch from a repeater to
simplex communications.
Advanced Intercept Point
You can choose either high sensitivity for
simplex/weak-signal work, or a high
intercept point — using Kenwood’s own
AIP circuitry — to minimize intermod or
adjacent channel interference.
Kenwood’s TM-V7E(BL) FM dual-band (144MHz/430MHz)
transceiver is packed with powerful on-board features that
give it the edge in today’s mobile communications. T ake, for
instance, the “five-in-one” programmable memory, DTSS
and pager functions, 280 memory channels, and the ability
to receive two frequencies on the same band. Yet at the same
time it offers superb ease of operation, with its user-friend-
ly controls, large LCD and guide function.
Outside and in, the TM-V7E(BL) exemplifies
the designed-in quality and attention to
detail for which Kenwood
is famous.
TM-V7E(BL)
6-pin mini DI N connector for
1200/9 6 00bps packet
The front panel features a connector for
hooking up to a TNC, enabling either
standard 1200bps or 96 00bps highspeed packet communications. And for
extra convenience, the TM-V7E(BL) lets
you set up separate bands for voice and
data.
Quick-release detachable front
panel kit (option)
To enhance security, simply remove the
compact front panel whenever the car is
left unattended. If the optional quickrelease kit is used, the panel can be
mounted virtually anywhere since the
microphone cable connects directly to
the main unit.
❚ Automatic band change
❚ Selectable frequency step
(5, 6.25,10, 12.5, 15, 20, 25 or 50kHz)
❚ Transceiver control function
❚ Voice synthesizer (requires VS-3 option)
❚ Incremental MHz key ❚ S-meter squelch
❚ Time-out timer ❚ Audible frequency identification
❚ Auto repeater offset (144MHz) ❚ Separate speaker
terminals for each band (switchable)
❚ Power-on message ❚ Contrast adjustment
❚ Dimmer control ❚ Auto power-off circuit
❚ Heavy-duty construction ❚ Optional MC-53DM
multi-function backlit mic with DTMF
Guide function
There’s no need to carry the manual
with you — the friendly guide function
displays operating instructions at the
touch of a button.
Quick-release front panel installations
The typical installations illustrated here demonstrate just two of the many ways in
which detachable front panel kits may be used with the TM-V7A(BL). For a minivan,
the main unit can be installed out of the way under a front seat. In the case of a passenger car, it can be installed in the trunk. The choice of cable lengths ensures full
versatility to suit a wide variety of vehicles.
Note: Not all kits are sold as shown; see Optional
Accessories for exact kit contents.
DFK-7C cable kit DFK-4C cable kit
TM-V7E(BL)
GENERAL
Frequency Range 144 MHz: TX/RX: 144 ~ 146 MHz
RX: 430 ~ 440 MHz
430 MHz: TX/RX: 430 ~ 440 MHz
RX: 144 ~ 146 MHz
Mode F3E (FM)
Power Requirement 13.8 V DC ±15% , negative ground
Current Drain (High power)
Transmit 144 MHz: Less than 11 A
430 MHz: Less than 10 A
Receive 144 / 430 MHz: Less than 1 A
Operating T emperature Range -20°C ~ + 60 C°
Antenna Impedance 50 Ω
Microphone Impedance 600 Ω
Frequency Tolerance ±3 ppm (14°F ~ 122°F)
Dimensions (W x H x D)
[projections not included]
140 x 40 x 189 mm
Weight 1.2 kg
TRANSMITTER
RF Output Power
HI 144 MHz: 50 W
430 MHz: 35 W
MID (approx.) 10 W
LO (approx.) 5 W
Modulation Reactance modulation
Maximum Frequency Deviation Less than ±5 kHz
Spurious Radiation Less than -60 dB
Modulation Distortion Less than 3% (300 Hz ~ 3 kHz)
RECEIVER
Circuitry Double conversion superheterodyne
Intermediate Frequency
1st IF 144 MHz: 38.85 MHz
430 MHz: 45.05 MHz
2nd IF 144 MHz: 450 kHz
430 MHz: 455 kHz
Sensitivity (12 dB SINAD) 144 MHz: Less than 0.16 µV
430 MHz: Less than 0.16 µV
Selectivity
-6 dB More than 12 kHz
-60 dB Less than 28 kHz
Squelch Sensitivity 144 MHz: Less than 0.1 µV
430 MHz: Less than 0.1 µV
Audio Output Power More than 2 W (8 Ω, 5% distortion)
Optional Accessories
Kenwood House, Dwight Road, Watford, Herts, WD1 8EB, United Kingdom
Rembrücker Str. 15, 63150 Heusenstamm, Germany
13 Boulevard Ney, 75018 Paris, France
Via G. Sirtori 7/9, 20129 Milano, Italy
Bolivia, 239-08020 Barcelona, Spain
Leuvensesteenweg 248 J, 1800 Vilvoorde Belgium
0682
Specifications
MC-80
Stand Microphone
(requires MJ-88)
MC-60A
Deluxe Desktop
Microphone
(requires MJ-88)
MC-53DM
Multi-function
Backlit Microphone
with DTMF
MC-58DM
Hand Microphone
with DTMF
RC-V7
Control Panel
PG-5A
Data Cable
PS-33
Power Supply
MB-201*
Mobile Mount
*There are certain
restrictions
on installation.
MJ-88
Microphone
Plug Adapter
(modular to 8-pin)
SP-50B
Mobile Speaker
VS-3
Voice Synthesizer
DFK-7C
Quick-Release Detachable Front Panel Kit
(includes quick-release panel, panel
mount & cushion, 23.0ft/7m panel cable,
23.0ft/7m microphone cable, 16.4ft/5m
speaker cable, 19.7ft/6m power cable)
DFK-4C
PG-3B
DC Line Noise
Filter
PG-2N
Power Cable
Not all products are available in all markets.
Quick-Release Detachable Front Panel
Kit (includes quick-release panel, panel
mount & cushion, 13.1ft/4m panel
cable, 13.1ft/4m
microphone cable)
DFK-3C
Quick-Release Detachable Front
Panel Kit (includes quick-release
panel, panel mount
& cushion,
9.9ft/3m panel
cable)
Kenwood follows a policy of continuous advancement in development. For this reason
specifications may be changed without notice.
These specifications are guaranteed for Amateur Bands only.
CA248E-E-4
Loading...