Kenwood TK-3202E3 User Manual

INSTRUCTION MANUAL

VHF FM TRANSCEIVER

TK-2202

UHF FM TRANSCEIVER

TK-3202

THANK YOU

We are grateful you chose KENWOOD for your land mobile radio applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency.

KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product.

MODELS COVERED BY THIS MANUAL

TK-2202: 8-channel VHF FM Transceiver TK-3202: 8-channel UHF FM Transceiver

NOTICES TO THE USER

◆ Government law prohibits the operation of unlicensed radio transmitters within the territories under government control.

◆ Illegal operation is punishable by fine or imprisonment or both.

◆ Refer service to qualified technicians only.

Safety: It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver.

EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.)

Turn off your transceiver while taking on fuel, or while parked in gasoline service stations.

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer for technical assistance.

ATTENTION (U.S.A. Only):

The RBRC Recycle seal found on KENWOOD nickel metal hydride (Ni-MH) battery packs indicates KENWOOD’s voluntary participation in an industry program to collect and recycle Ni-MH batteries after their operating life has expired. The RBRC program is an alternative to disposing Ni-MH batteries with your regular refuse or in municipal waste streams, which is illegal in some areas.

For information on Ni-MH battery recycling in your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment to preserve our environment and conserve our natural resources.

PRECAUTIONS

Observe the following precautions to prevent fire, personal injury, and transceiver damage.

• Do not modify or attempt to adjust this transceiver for any reason.

• Do not expose the transceiver to long periods of direct sunlight, nor place it close to heating appliances.

• Do not place the transceiver in excessively dusty, humid, and/or wet areas, nor on unstable surfaces.

• If an abnormal odor or smoke is detected coming from the transceiver, switch OFF the power immediately and remove the optional battery pack from the transceiver. Contact your KENWOOD dealer.

iii

CONTENTS

UNPACKING AND CHECKING EQUIPMENT .......................... 1

SUPPLIED ACCESSORIES ................................................ 1

PREPARATION .......................................................... 3

HARGING THE Ni-MH BATTERY PACK .................................. 3

INSTALLING/ REMOVING THE BATTERY PACK .............................. 5

INSTALLING THE ANTENNA ............................................... 6

INSTALLING THE BELT CLIP .............................................. 6

INSTALLING THE COVER OVER THE SPEAKER/ MICROPHONE JACKS .......... 7

INSTALLING THE OPTIONAL SPEAKER/ MICROPHONE (OR HEADSET) ......... 7

GETTING ACQUAINTED ................................................ 8

PROGRAMMABLE AUXILIARY FUNCTIONS ......................... 9

BASIC OPERATIONS ................................................. 10

ADVANCED OPERATIONS............................................ 11

AUTODIAL ........................................................... 11

KEY LOCK ........................................................... 11

MONITOR/ SQUELCH OFF ............................................. 12

CAN ............................................................... 13

SCRAMBLER ......................................................... 15

VOICE OPERATED TRANSMISSION (VOX) ......................... 16

BACKGROUND OPERATIONS ....................................... 18

TIME-OUT TIMER (TOT) ............................................. 18

BUSY CHANNEL LOCKOUT (BCL) ..................................... 18

BATTERY SAVE ....................................................... 18

LOW BATTERY WARNING ............................................. 19

CHANNEL ANNUNCIATION .............................................. 19

QUIET TALK (QT)/ DIGITAL QUIET TALK (DQT) ....................... 19

STUN ............................................................... 20

DUAL-TONE MULTI-FREQUENCY (DTMF) SIGNALLING .................. 20

FLEETSYNC OPERATION ............................................... 21

BEGINNING/ END OF TRANSMISSION SIGNAL ............................ 21

UNPACKING AND CHECKING EQUIPMENT

Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately.

SUPPLIED ACCESSORIES

metI rebmuNtraP ytitnauQ

stekramM,K

)2022-KT(

annetnA

regrahcyrettaBXX-9690-80W1

rotpadaCA

)stekram2K,K(

rotpadaCA

)stekram2M,M(

tekcarb

pilctleBXX-3170-92J1

teswercSXX-3402-99N1

launamnoitcurtsnIXX-2671-26B1

stekramM,K

)2023-KT(

stekram2M,2K

)2023-KT(

)N92-BNK(kcapyrettabHM-iNXX-0001-90W1

revockcajenohporcim/rekaepSXX-0860-90B1

gnikcolenohporcim/rekaepS

XX-6301-09T

XX-9301-09T

XX-0401-09T

XX-0790-80W1

XX-1790-80W1

XX-2745-91J1

Note: A market code (K, K2, M, or M2) can be found on the label attached to the package box.

Antenna: K, M

markets (TK-2202)

Antenna: K, M

markets (TK-3202)

Antenna: K2, M2

markets (TK-3202)

Battery charger

Ni-MH battery pack

(KNB-29N)

locking bracket

AC adaptor

(K, K2 markets)

Belt clip

AC adaptor

(M, M2 markets)

Speaker/ microphone

jack cover

Screw setSpeaker/ microphone

PREPARATION

CHARGING THE Ni-MH BATTERY PACK

The battery pack is not charged at the factory; charge it before use.

The initial charging of the battery pack after purchase or extended storage (greater than 2 months) will not bring the battery pack to its normal operating capacity. After repeating the charge/discharge cycle 2 or 3 times, the operating capacity will increase to normal.

◆ Do not recharge the battery pack if it is already fully charged. Doing so may cause the life of the battery pack to shorten or the battery pack may be damaged.

◆ After recharging the battery pack, disconnect it from the charger. Charging the battery pack for more than 5 days may reduce the battery pack life due to overcharging.

Note:

◆ The ambient temperature should be between 32°F and 104°F (0°C and 40°C) while charging is in progress. Charging outside this range may not fully charge the battery.

◆ Always switch OFF the transceiver equipped with a Ni-MH battery pack before charging. Using the transceiver while charging its battery pack will interfere with correct charging.

◆ The battery pack life is over when its operating time decreases even though it is fully and correctly charged. Replace the battery pack.

+ 18 hidden pages