We are grateful for your purchase of this KENWOOD product and
welcome you to the General Mobile Radio Service (GMRS). Your
KENWOOD 2-way radio is called a “transceiver”, meaning
“transmitter & receiver”. We believe this easy-to-use transceiver will
provide you with dependable and reliable communications. This
KENWOOD transceiver is a precision device. Treat it with care, and
you will enjoy years of reliable operation.
FEATURES
•Compact design with a sturdy, polycarbonate body and a springloaded belt hook.
•Can be used with the supplied Ni-MH battery pack or 3 AA
batteries.
•15 channels with 121 tone/code settings for each channel,
allowing you to ignore unwanted calls.
•Privacy Talk scrambles all your voice messages, giving you
complete privacy for your conversations.
•Automatic battery power saver, providing you with longer battery
usage.
•Battery power level indicator with low battery power warning.
•Key lock and Super Lock prevent you from accidentally changing
your transceiver settings.
•Six different call tones allows you to identify yourself to your
group before you begin speaking.
•Hands free operation when using an optional KHS-21 headset.
OPERATING CONDITIONS
snoitacolnepO
)snoitcurtsboon(
saeralaitnediseR
)sgnidliubraen(
decrofnieretercnoc/leetsnI
sgnidliub
sesirhgihnIsroolf51otpU
selim4otpU
)mk4.6yletamixorppa(
selim5.1otpU
)mk4.2yletamixorppa(
teeferauqs000,002otpU
2
)
m085,81yletamixorppa(
Note: The listed ranges are based on field testing and may vary with
your operating conditions.
FCC LICENSE INFORMATION
Your KENWOOD radio operates on communications
frequencies which are subject to FCC (Federal
Communications Commission) Rules & Regulations. FCC
Rules require that all operators using Personal Radio Service
frequencies obtain a radio license before operating their
equipment. Application for license must be made on FCC
form 574. Temporary operation is allowed, using form 574T
which has been provided for your convenience (remove the
form from the center of this Instruction Manual). Please read
and follow the instructions on the provided form.
FAX: Forms can be obtained by fax from the FCC
Fax-On-Demand system. Call 1-202-418-0177 from your
fax machine and request document number 000574 for the
form and instructions. If you would like an example of a
completed 574 form, also request document number 005741.
MAIL: Forms can be ordered by telephone, and will be sent
to you by first class mail. Call the FCC Forms Hotline at
1-800-418-FORM (1-800-418-3676).
INTERNET: Form 574 and instructions can be downloaded
from the FCC Forms website at:
http://www.fcc.gov/formpage.html
Before filling out your Form 574 application Technical Data
section, you must decide which frequency (or frequencies)
you will operate on. Refer to the frequency charts on
pages 41 and 42.
Questions? Call the FCC for license application questions at
1-888-CALL-FCC (1-888-225-5322).
i
PRECAUTIONS
•Refer service to qualified technicians only. Do not modify or
attempt to adjust the transceiver for any reason.
•Do not expose the transceiver to long periods of direct
sunlight, nor place it close to heating appliances.
•Do not place the transceiver in excessively dusty, humid, or
wet areas, nor on unstable surfaces.
•Avoid extremes in exposure to weather, heat, and cold. This
transceiver can be used in mild weather conditions, but it is
not waterproof.
•Turn OFF your transceiver while taking on fuel or while parked
in gasoline service stations.
•Do not operate your transceiver or charge your battery pack in
an explosive atmosphere (gases, dust, fumes, etc.).
•If an abnormal odor or smoke is detected coming from the
transceiver, immediately switch OFF the power and remove
the batteries from the transceiver. Contact your KENWOOD
dealer.
◆ Government law prohibits the operation of unlicensed radio
transmitters within the territories under government control.
◆ Illegal operation is punishable by fine and/or imprisonment.
SAFETY: It is important that the operator is aware of and
understands hazards common to the operation of any transceiver.
ii
CONTENTS
UNPACKING AND CHECKING EQUIPMENT ......................... 1
Carefully unpack the transceiver. We recommend you identify the
items listed in the following table before discarding the packing
material. If any items are missing or have been damaged during
shipment, file a claim with the carrier immediately.
SUPPLIED ACCESSORIES
metIrebmuNtraPytitnauQ
)swercshtiw(koohtleBXX-1960-92J1
kcapyrettabN72-BNK—1
regrahcdipar82-CSK
)retpadadnaredlohhtiw(
dracytnarraW—1
launamnoitcurtsnIXX-0951-26B1
—1
Belt hook (with screws)
KSC-28 rapid charger (with holder and adapter)
KNB-27N battery pack
1
ORIENTATION
2
DISPLAY
nocInoitpircseD
.detavitcasiXOVnehwsraeppA
noissimsnartwolgnisunehwsraeppA
.rewop
ahtiwputessilennahcehtnehwsraeppA
.edocTQD
.detavitcasiklaTycavirPnehwsraeppA
.reviecsnartsihtnodesutonsinocisihT
rewopyrettabetamixorppaehtsyalpsiD
rewopyrettabehtnehwsknilB.gniniamer
.wolsi
noitacifitoNllaCgnimocnInehwsraeppA
.etarbivottessi
htiwgnolarebmunlennahcehtsyalpsiD
.)tesneebsahtifi(gnittesTQD/TQsti
unemdnasunemsuoiravsyalpsidoslA
.sgnittes
.lennahcagnirotinomelihwsraeppA
erasyekreviecsnartehtnehwsraeppA
.dekcol
3
PREPARATION
INSTALLING/ REMOVINGTHE BATTERY PACK
The battery pack is not charged at the factory; charge it before
use (pages 6 and 7).
Average battery pack life using low power: 12 hours
Average battery pack life using high power: 10 hours
•Average times are calculated using 5% transmit time, 5% receive
time, and 90% standby time.
◆ Do not short the battery terminals or dispose of the battery by
fire.
◆ Never attempt to remove the casing from the battery pack.
1 Remove the battery cover from
the rear of the transceiver by
sliding it back and pulling it away
from the transceiver body.
2 Install the battery pack as shown
in the diagram. When removing
the battery pack, pull on the
ribbon that is attached to the
pack to dislodge the pack from
the battery compartment.
3 Align the battery cover tabs with
the slots on the transceiver, then
firmly slide the cover into place.
Ribbon
4
INSTALLING/ REMOVING BATTERIES
In place of the battery pack, you can use 3 AA batteries. Use
high quality alkaline batteries to enjoy longer periods of
battery life.
Average battery life using low power: 8 hours
Average battery life using high power: 4 hours
•Average times are calculated using 5% transmit time, 5% receive
time, and 90% standby time.
1 Remove the battery cover from
the rear of the transceiver by
sliding it back and pulling it away
from the transceiver body.
2 Install or remove 3 AA batteries.
•Be sure to match the battery
polarities with those marked in
the transceiver casing.
3 Align the battery cover tabs with
the slots on the transceiver, then
firmly slide the cover into place.
Note:
◆ Do not mix old and new batteries or batteries of different types.
◆ When you do not use the transceiver for an extended period of
time, remove the batteries from the transceiver.
5
CHARGINGTHE BATTERY PACK
Initially charging the battery pack after purchase or extended
storage (greater than 2 months) will not bring the battery pack
to its normal operating capacity. After repeating the charge/
discharge cycle two or three times, the operating capacity will
increase to normal.
◆ Do not recharge the battery pack if it is already fully charged.
Doing so may cause the life of the battery pack to shorten or the
battery pack may be damaged.
◆ After recharging the battery pack, disconnect it from the charger.
Charging the battery pack for more than 5 days may reduce the
battery pack life due to overcharging.
Note:
◆ The ambient temperature should be between 41°F and 104°F
(5°C and 40°C) while charging is in progress. Charging outside
this range may not fully charge the battery.
◆ Always switch OFF the transceiver equipped with a battery pack
before charging. Using the transceiver while charging its battery
pack will interfere with correct charging.
◆ The battery pack life is over when its operating time decreases
even though it is fully and correctly charged. Replace the battery
pack.
6
1 Plug the AC adapter cable into
the adapter jack located on the
rear of the charger.
2 Plug the AC adapter into an AC
outlet.
3 Slide a battery pack using the
supplied holder or a transceiver
equipped with a battery pack
into the battery pack slot.
•Make sure the metal contacts of
the battery pack mate securely
with the charger terminals.
•The indicator lights red and
charging starts.
4 When charging is completed,
the indicator lights green.
Remove the battery pack or the
transceiver from the battery
pack slot.
•It takes approximately 2.5 hours
to charge the battery pack.
•When the charger will not be
used for a long time, unplug the
AC adapter from the AC outlet.
7
INSTALLING/ REMOVINGTHE BELT HOOK
If desired, attach the belt hook
to the rear of the transceiver
using the 2 supplied screws.
INSTALLING/ REMOVING OPTIONAL ACCESSORIES
Note: Always switch OFF the transceiver power when installing or
removing the optional accessories.
The following accessories can be used with this transceiver:
•KMC-21 Speaker-Microphone
•KHS-21 Headset
•KHS-1 Headset
•EMC-3 Clip Microphone with Earphone
To install these accessories:
1 Open the SP/MIC tabs on the side of
the transceiver.
2 Insert the accessory’s plugs into the
SP/MIC jacks.
3 When you remove the accessory
from the transceiver, be sure to cover
the SP/MIC jacks with the attached
tabs in order to keep dust and dirt
away from the contacts.
Note: Refer to the accessory instruction manuals for detailed
instructions on each of the accessories.
8
GETTING STARTED
qq
q Switch the Power ON.
qq
Switch the transceiver power ON by turning
the Power switch/ Volume control clockwise.
•A confirmation tone sounds. When using
simplex operation, a single tone sounds.
When using semi-duplex operation, two tones
sound. Refer to page 32 for details on
selecting simplex or semi-duplex operation.
To switch the transceiver power OFF, turn the
Power switch/ Volume control fully
counterclockwise, until a click sounds.
ww
w Adjust the Volume.
ww
Set your desired volume level by rotating the
Power switch/ Volume control.
•Clockwise increases the volume and
counterclockwise decreases the volume.
Note: To adjust the volume using background noise
as a reference, use the monitor function (page 16).
9
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.