Kenwood KSW-700 User Manual
3.1ch Speaker System
KSW-700
INSTRUCTION MANUAL
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS
ITALIANO ESPAÑOL
C
B60-5687-00/00 (E) KW
Before applying power
Caution : Read this page carefully to
ensure safe operation.
Units are designed for operation as follows.
Australia ........................................................... AC 240 V only
Europe .............................................................. AC 230 V only
Safety precautions
WARNING : TO PREVENT FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
ENGLISH
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMB OL , WITH IN AN EQUILATERAL T RIANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’
S ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONST IT UT E A RI SK OF
ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY
INSTRUCTIONS
Caution : Read this page carefully to
ensure safe operation.
Read Instructions – All the safety and operating
instructions should be read before the product is
operated.
Retain Instructions – The safety and operating
instructions should be retained for future reference.
Heed Warnings – All warnings on the product and
in the operating instructions should be adhered to.
Fol low Instructions – All operating and use
instructions should be followed.
1. Cleaning – Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
2. Attachments
recommended by the product manufacturer as they
may cause hazards.
3. Water and Moisture
exposed to dripping and splashing – for example,
near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool;
and the like. Do not place an object containing
liquid, such as a flower vase, on the appliance.
4. Accessories
an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injur y to a
child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer. Any mounting
of the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
A produ ct an d car t comb inati on
shou ld be moved with ca re. Qu ick
stops, exce ss ive force, an d unev en
surfaces may cause the product and
cart combination to overturn.
5. Ventilation
are provided for ventilation and to ensure reliable
ope ration of the product and to protect it fro m
over heating, and the se openin gs must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
– Do not use attachments not
– This product shall not be
– Do not place this prod uct on
– Slots and openings in the cabinet
2
EN
I
6. Power Sources –
only from the type of power sou rc e in di ca ted on the
product. If you are not sure of the type of power supply
to your home, consult your product dealer or local power
company.
7.
CAUTION
be equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This
is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
8. Power Cord Protection
sh ou ld be rou te d so th at they are not likel y to be
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
9. Lightning
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to
lightning and power-line surges.
10. O verlo adi ng
extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock.
11. Object and Liquid Entry
any kind into this product through openings as they
may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
12. Servicing
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
13. Damage Requiring Service
from the wall outlet and refer servi cing to qualified
service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
c) If the product has been exposed to rain or water,
d) If th e pr od uct does no t operate norma ll y by
following the operating instructions.
e) If the product has been dropped or damaged in
any way, and
f) When the product exhibits a distinct change in
performance – this indicates a need for service.
g) If an abnormal smell or smoke is detected.
This product should be operated
– Polarization – This product may
– Power -s up pl y co rd s
– For added protection for this product
– Do not overlo ad wal l outl ets ,
– Never push objects of
– Do not attempt to service this product
– Unplug this product
14.
Replacement Parts – When replacement parts
are required, be sure the service technician has used
replacement part s specified by the manufacturer
or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
15. Safety Check – Upon completion of any service
or repairs to this product, ask the service technician
to perform safe ty che cks to determine that the
product is in proper operating condition.
16. Wa ll or Ceili ng Mou nti ng
– Th is pro duc t
shou ld be mo unte d to a wall or ceil in g on ly as
recommended by the manufacturer.
17. Heat
– This product should be situated away
from heat sources such as radiators, heat registers,
stoves, or other products that produce heat. Do not
place a flaming object, such as a candle or lantern,
or near the product.
18. Po wer Lin es
– An ou tside an te nna sys tem
should not be located in the vicinity of overhead
power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme
care should be taken to keep from touching such
power lines or circuits as contact with them might
be fatal.
19. Outdoor Antenna Grounding
– If an outside
an ten na or ca ble sys tem is con nect ed to the
product, be sure the antenn a or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the Nat io na l Elec trical Code, ANSI /N FPA
70, provides information with regard to p rope r
grounding of the mast and supporting structure,
gr ound ing of th e le ad- in wi re to an an tenn a
di sch arge uni t, si ze of grou ndi ng co ndu cto rs,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA
GROUNDING AS PER NATIONAL
ELECTRICAL CODE
GROUND CLAMPS
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Notes:
1. Item 7 is not required except for grounded or
polarized equipment.
2. Item 19 complies with UL in the U.S.A.
ENGLISH
EN
3
Before applying power
Accessories
Unpack the unit carefully and make sure that all the accessories are present.
Audio cord
(White, Red)… 2
System control cord
(ø 3.5mm – ø 3.5mm)… 1
Speaker cord
For surround (blue line: 10m)… 2
For center (red line: 3m)… 1
ENGLISH
For subwoofer (red line: 4.5m)… 1
Cushions for surround & center speakers
… 12
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the
unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the
original carton and packing materials in case you need to move or ship the unit in the future.
Keep this manual handy for future reference.
Contents
To ensure safety, read the items carrying this marking carefully.
Before applying power …………………………… 2
IMPORTANT SAFETY INSTRUCTIONS …………… 2
Accessories…………………………………………………4
Contents ……………………………………………………4
Installation …………………………………………… 5
Installation for main amplifier ……………………………5
Installation for speakers …………………………………6
About using speakers near a TV …………………………6
Attaching the cushions ……………………………………6
Using speakers on the desktop or shelf …………………6
Using speakers on the wall ………………………………7
Mounting methods ………………………………………7
Connections …………………………………………… 8
Names and functions of parts …………………… 10
Speaker setting ……………………………………… 11
System selection ……………………………………… 11
Setting the volume balance …………………………… 12
Setting the speaker distance …………………………… 12
Surround play ……………………………………… 13
Surround modes ……………………………………… 13
Selecting the listening mode ………………………… 13
Surround indicator …………………………………… 14
Troubleshooting …………………………………… 15
Specifications ……………………………………… 16
4
EN
Installation
0
Installation for main amplifier
C-AX7
(AX-7 system)
ENGLISH
M-AX7
(AX-7 system)
M-AX700
LS-AXD7 (AX-7 system)
Left speaker
CAUTION
Be sure to adhere to the following, or proper ventilation
will be blocked causing damage or fire hazard.
¶
Place the C-AX7 on top of the system when stacking
with C-AX7.
¶
Do not place any objec ts impairing heat radiation
onto the top of the C-AX7. Leave some space around
the C-AX7 (from the large st out side dimens ion
including projection) equal to or greater than, shown
below.
Top panel: 50cm Back panel: 10cm
¶
Leave some space around the M-AX7/M-AX700 (from
the largest outside dimension including projection)
equal to or greater than, shown below.
Back panel: 10cm
¶
This unit is using the cooling fan. Do not place the
equipment onto a bed, a s ofa, a carpet, or similar.
Sucked-in dust can cause fire.
The power in this equipment will not be completely cut
off from the wall outlet when the power switch is turned
off.
Install t he equipment s o that the wall outlet is easily
acces sible and, in case of emerge ncy, imme diat ely
unplug the power cord from the wall outlet.
LS-AXD7 (AX-7 system)
Right speaker
EN
5
Loading...