Kenwood KMM-BT525HD, KMM-X503, KMR-M325BT, KMM-BT225U, KMM-BT325U Instruction Manual

...

KMM-BT525HD

KMM-BT325

KMR-M325BT KMM-X503 KMM-BT325U

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

MODE D’EMPLOI

RECEPTOR DE MEDIOS DIGITALES

MANUAL DE INSTRUCCIONES

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KMM-BT525HD/KMM-X503/KMM-BT325U/KMM-BT325/KMM-BT250U/KMM-BT225U/KMR-M325BT Serial number

US Residents Only

KMM-BT250U KMM-BT225U

Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos)

Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con su administración local para obtener información sobre el punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

Informação sobre a eliminação de pilhas

Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou importador. A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.

CALIFORNIA, USA ONLY

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Supplier's Declaration of Conformity

Trade Name: KENWOOD Products: DIGITAL MEDIA RECEIVER Model Name: KMM-BT525HD/KMM-X503/KMM-BT325U/KMM-BT325/ KMM-BT250U/KMM-BT225U/KMR-M325BT Responsible Party: JVCKENWOOD USA CORPORATION 2201 East Dominguez Street, Long Beach, CA 90810, U.S.A. PHONE: 310 639-9000

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY

CAUSE UNDESIRED OPERATION.

IC (Industry Canada) Notice

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired

operation of the device.

Note de IC (Industrie Canada)

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

CAUTION

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.

ATTENTION

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée comme conforme sans évaluation de l’exposition maximale autorisée (MPE). Cependant, il est souhaitable qu’il devrait être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.

Contains Bluetooth Module / / /

FCC ID: ZWY8811X IC ID: 12033A-8811X

FCC ID: ZWY8350X IC ID: 12033A-8350X

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

/ / :

Para cumplimiento de la IFT:

“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su

operación no deseada”

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates and upgrades) on condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.

iii

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement, unless otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any other intellectual property right that was caused by the User's use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or settled upon good-faith consultation between the Licensor and the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from, and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

-jansson

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/ or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-cJSON

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

-CMP

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

CONTENTS

BEFORE USE 2 BASICS 3 GETTING STARTED 4

1 Select the display language

and cancel the demonstration 2 Set the clock and date 3 Set the initial settings

HD RadioTM tuner 6 RADIO 8 USB/iPod/ANDROID 10 AUX 12 Pandora® 13 iHeartRadio® 14 Spotify 15 SiriusXM® Radio 16 BLUETOOTH® 19 AUDIO SETTINGS 27 DISPLAY SETTINGS 30 REFERENCES 32

Maintenance More information

TROUBLESHOOTING 36 INSTALLATION/

CONNECTION 39 SPECIFICATIONS 43

BEFORE USE

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual.

• Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

• Do not ingest the battery, Chemical Burn Hazard.

The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

• USB rating is indicated on the main unit. To view, detach the faceplate. (Page 3)

• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected (page 41). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

How to read this manual

• Operations are explained mainly using buttons on the faceplate of .

• English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. (Page 5)

• [XX] indicates the selected items.

• (Page XX) indicates references are available on the stated page.

ENGLISH

BASICS

Faceplate

Display window

Volume

knob

Lights up when Bluetooth connection is established.*1 (Page 19)

Detach button

Attach How to reset Detach

To On the faceplate On the remote control

Turn on the power

Adjust the volume Turn the volume knob. Press VOL

Select a source

Change the display information*3 Press DISP repeatedly. (Page 34, 35) ( Not available )

rear of the unit.

/ : USB cable from the

Reset the unit within 5 seconds after detaching the faceplate.

Press B SRC.

• Press and hold to turn off the power.*2

Press B SRC repeatedly.

Remote control (RC-406)

controlled with an optionally purchased remote control.

/ / : Remote control

functions are not available.

How to replace the battery

Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. )

or VOL .

• Press and hold VOL

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Press SRC repeatedly.

(supplied for )

Remote sensor (Do not expose to bright sunlight.)

Pull out the insulation sheet when using for the first time.

/ / : Can be remotely

to continuously increase the volume to 15.

*1 Only for / / / / . *2 For *3 For

: The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).

: You can also turn off the display information by pressing DISP repeatdly. (Page 34)

ENGLISH

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power for the first time (or

[YES]

, see page 5), the display shows: “SEL LANGUAGE” “PRESS”

“VOLUME KNOB”

1 Turn the volume knob to select

press the knob.

[ENG]

is selected for the initial setup.

[ENG]

Then, (except for ) the display shows: “CANCEL DEMO”

“PRESS” “VOLUME KNOB”.

2 Press the volume knob again.

[YES]

is selected for the initial setup.

3 Press the volume knob again. “DEMO OFF” appears.

Set the clock and date

Press the volume knob to enter

1 2 Turn the volume knob to select

To adjust the clock

3 Turn the volume knob to select

[FUNCTION] [CLOCK]

[CLOCKADJUST]

4 Turn the volume knob to make the settings, then press the knob. Hour Minute 5 Turn the volume knob to select 6 Turn the volume knob to select

[CLOCK FORMAT] [12H]

[FACTORY RESET]

(English) or

, then press the knob.

[SPA]

(Spanish), then

, then press the knob.

[24H]

, then press the knob.

is set to

To set the date

7 Turn the volume knob to select 8 Turn the volume knob to select

the knob.

9 Turn the volume knob to select

[DATEFORMAT] [DD/MM/YY]

[DATESET]

, then press the knob.

[MM/DD/YY]

, then press

10 Turn the volume knob to make the settings, then press the knob. Day Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press

Set the initial settings

Press B SRC repeatedly to enter STANDBY.

1 2 Press the volume knob to enter

[FUNCTION]

3 Turn the volume knob to select an item (see the following table), then

press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press

[AUDIO CONTROL]

[SWITCH PREOUT]

(For / ) [REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). (Page 42)

Default: [XX]

ENGLISH

GETTING STARTED

[DISPLAY]

[EASY MENU]

[TUNER SETTING]

[PRESET TYPE]

[SYSTEM]

[KEY BEEP]

[SOURCE SELECT]

[PANDORA SRC]

[IHEART SRC]

[SPOTIFY SRC]

[BUILT-IN AUX]

(For / / /

/ )

When entering [FUNCTION]...

[ON]: [ZONE 1] illumination changes to white color. ; [OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.

(Page 31)

• [ZONE 2] illumination changes to light blue color when you enter [FUNCTION], irregardless of the [EASY MENU] setting.

• Refer to the illustration on page 30 for zone identification.

[NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM). ; [MIX]: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected band or SiriusXM channel.

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[ON]: Enables PANDORA/PANDORA FRONT/PANDORA REAR/PANDORA BT in source selection. ; [OFF]: Disables. (Page 13)

[ON]: Enables IHEARTRADIO/IHEARTRADIO-F/IHEARTRADIO-R in source selection. ; [OFF]: Disables. (Page 14)

[ON]: Enables SPOTIFY/SPOTIFY FRONT/SPOTIFY REAR/SPOTIFY BT in source selection. ; [OFF]: Disables. (Page 15)

[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12)

[F/W UPDATE]

[UPDATE SYSTEM]/[UPDATE HD](for

[F/W UP xxxx]

[FACTORY RESET]

[CLOCK]

[CLOCK DISPLAY]

[ENGLISH]

[ESPANOL]

Applicable only when you connect KENWOOD Marine Remote Control unit (KCA-RC55MR, optional accessory) to this unit.

• For connection, see “Connecting external components” on page 42.

• Refer also to the supplied instruction manual of the KENWOOD Marine Remote Control unit for more information.

[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.

[YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.

(Except for ) [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels.

Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected.

(for )

/ )

ENGLISH

GETTING STARTED

Preparation:

Press B SRC repeatedly to enter STANDBY, then press the volume knob to enter

[FUNCTION]

1 Turn the volume knob to select an item, then press the knob.

[SYSTEM]

Remote control ID list is displayed.

[REM SETTING]

•

[YES]

•

indicates that this ID is already registered.

[NO]

indicates that this ID is available.

2 Turn the volume knob to select an available ID

[REMID3]

, then press the knob.

“REGISTERING” appears on the display window. To register, on the KENWOOD Marine Remote Control unit:

• Press ENTER to register as

• Press SRC to register as

• Press DISP to register as Once the ID is registered, “COMPLETED” appears.

To delete the registered ID

1 Turn the volume knob to select an item, then press the knob.

[SYSTEM]

[REM SETTING]

2 Turn the volume knob to select the ID to delete

[ID3 DELETE]

, then press the knob.

3 Turn the volume knob to select

select

[NO]

to cancel.

• To exit, press and hold

• To return to the previous setting item, press

[REMOTE ID SET]

[REM ID1]

[REM ID2]

[REM ID3]

[REMOTE ID DEL]

[REMID1]/[REMID2]

[ID1 DELETE]/[ID2 DELETE]

[YES]

to delete the selected ID, and

HD Radio™ tuner

You can tune in to both conventional and HD Radio broadcasts.

• To find HD Radio stations in your area, visit <http://www.hdradio.com>.

(for / )

Search for a station

Press B SRC repeatedly to select HD RADIO.

1 2 Press BAND repeatedly (or press #FM+/

to select FM1/FM2/FM3/AM.

AM– on the remote control)

3 Press S / T (or press S / T (+) on the remote control) to

search for a station or channel.

You can store up to 18 stations/channels for FM and 6 stations/channels for AM.

• To store a station or channel: Press and hold one of the number buttons (1 to 6).

• To select a stored station or channel: Press one of the number buttons

(1 to 6) (or press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning

(using the remote control)

1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a station frequency or channel

number.

3 Press ENT IW to search for station or channel.

• To cancel, press

• If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

or DIRECT.

ENGLISH

HD Radio™ tuner

(for / )

Select an HD Radio multicast channel

Many HD Radio stations offer more than one channel programming. This

service is called multicasting. While receiving HD Radio multicast channels....

Press S / T to select your desired channel (HD1 to HD8).

“LINKING” appears while linking to a multicast channel.

Receive an Emergency Alert message

You can receive an emergency alert message while listening to another source or while in STANDBY, via HD Radio Broadcast.

Activate emergency alert message reception

Press the volume knob to enter

1 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to select

[FUNCTION] [TUNER SETTING] [EA] [ON]

, then press the knob.

5 Press and hold to exit.

[OFF]

• To deactivate emergency alert message reception, select

• To return to the previous setting item, press .

in step 4.

Receive an emergency alert message

When an emergency alert message is received, it appears and remains on the display until the user performs the “Ignore” function.

• Press B SRC (or press SRC on the remote control) to ignore the alert

message.

The same emergency alert message will not interrupt again for 12 hours.

Display received emergency alert messages

The received emergency alert messages are stored in the Alert Message List, and you can check them later. While listening to the HD RADIO source...

1 Press to display the Alert Message List. 2 Turn the volume knob to select a message. 3 Press the volume knob to display the information related to the

message.

4 Press again to exit.

• “NO LIST” appears when the list is empty.

• This feature can store up to four messages in the list.

• To clear the message list, set

[FACTORY RESET]

[YES]

. (Page 5)

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (page 8), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

ENGLISH

HD Radio™ tuner

[TUNER SETTING]

[SEEK MODE]

[IF BAND]

[AUTO MEMORY]

[RECEIVE MODE]

[CLOCK]

[TIME SYNC]

Selects the searching method for [AUTO1]: Automatically search for a station or channel. ; [AUTO2]: Search for a preset station or channel. ; [MANUAL]: Manually search for a station or channel.

[AUTO]: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain.

[YES]: Automatically starts memorizing 6 stations with good reception. ; [NO]: Cancels.

• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)

Sets the receive mode of the HD Radio receiver. [AUTO]: Automatically tunes to analog broadcast when there is no digital broadcast. ; [DIGITAL]: Tunes in to digital broadcast only. ; [ANALOG]: Tunes in to analog broadcast only.

[ON]: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ; [OFF]: Cancels.

(for / )

S / T

Default: [XX]

buttons when pressed.

RADIO

(for

• “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

• The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast.

/ / /

/ )

Search for a station

Press B SRC repeatedly to select RADIO.

1 2 Press BAND repeatedly (or press #FM+/

to select FM1/FM2/FM3/AM.

AM– on the remote control)

3 Press S / T (or press S / T (+) on the remote control) to

search for a station.

You can store up to 18 stations for FM and 6 stations for AM.

• To store a station: Press and hold one of the number buttons (1 to 6).

• To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on the remote control).

ENGLISH

Direct Access Tuning

(using the remote control)

1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a station frequency. 3 Press ENT IW to search for a station.

• To cancel, press

• If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

or DIRECT.

RADIO

(for / / / / )

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[TUNER SETTING]

[SEEK MODE]

[AUTO MEMORY]

[MONO SET]

[NEWS SET]

[REGIONAL]

[AF SET]

Selects the searching method for [AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset station. ; [MANUAL]: Manually search for a station.

[YES]: Automatically starts memorizing 6 stations with good reception. ; [NO]: Cancels.

• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)

[ON]: Improves the FM reception, but the stereo effect will be lost. ; [OFF]: Cancels.

(For )

[ON]: The unit will temporarily switch to News Programme if available. ; [OFF]: Cancels.

(For ) [ON]: Switches to another station only in the specific region using the “AF” control. ; [OFF]: Cancels.

(For ) [ON]: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; [OFF]: Cancels.

S / T

Default: [XX]

buttons when pressed.

[TI] [ON]: Allows the unit to temporarily switch to Traffic Information if

[PTY SEARCH]

[CLOCK]

[TIME SYNC]

•

[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH]

when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

available (“TI” lights up). ; [OFF]: Cancels.

(For / / /

Select the available Program Type (for Radio Broadcast Data System, see page 33), then press

(For

Turn the volume knob to select the available Program Type (for Radio

Data System, see page 33), then press the knob.

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

Press S / T to start searching.

[ON]: Synchronizes the unit’s time to the Radio Broadcast Data System/ Radio Data System station time. ; [OFF]: Cancels.

)

/ T to start.

is selectable only

ENGLISH

USB/iPod/ANDROID

Selectable source:

• iPod FRONT/iPod REAR/ANDROID FRONT/ANDROID REAR

•

ANDROID

Start playback

The source changes automatically and playback starts.

USB input terminal

/ : You can also connect to the USB cable from the rear of the unit (USB input terminal).

/ : USB FRONT/USB REAR/

/ / / / : USB/iPod USB/

USB

CA-U1EX (max.: 500 mA) (optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

ANDROID*3

USB cable*2 (commercially available)

To On the faceplate On the remote control

Play back/pause

Reverse/Fast-forward*4

Select a file

Select a folder*5 Press 2

Repeat play*4*6 Press 4

Random play*4*6 Press 3

*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not used. *3 You can control Android device using the Android device itself via other media player application installed in the Android

device. *4 Not applicable for ANDROID. *5 This does not work for iPod/ANDROID. *6 For iPod: Applicable only when [MODE OFF] is selected. (Page 11)

Press 6 IW. Press ENT IW.

Press and hold S / T. Press and hold S / T (+).

Press S / T. Press S / T (+).

/ 1 . Press #FM+/ AM–.

repeatedly.

[FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT]

[FILE REPEAT]/[FOLDER REPEAT]/[REPEAT OFF]

repeatedly.

[FOLDERRANDOM]/[RANDOM OFF]

Press and hold 3

to select

: MP3/WMA/AAC/WAV/

FLAC file

: iPod

: MP3/WMA/AAC/WAV/FLAC file or

iPod

[ALL RANDOM]

ENGLISH

USB/iPod/ANDROID

Select music drive

While in USB/USB FRONT/USB REAR source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drive device.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via USB input terminal).

• For “R.APP” indicator on the display window lights up when KENWOOD Remote application is connected.

Preparation:

• Install the latest version of KENWOOD Remote application on your device before connecting.

• For more information, visit <www.kenwood.com/cs/ce/>.

You can make the settings in the same way as connection via Bluetooth. (Page 25)

/ / / / ,

Listen to TuneIn Radio/TuneIn Radio Pro

While listening to TuneIn Radio or TuneIn Radio Pro, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Select control mode

While in iPodUSB/iPod FRONT/iPod REAR source (or iPodBT source), press 5 repeatedly.

[MODE ON]

: Control iPod using the iPod itself. However, you can still perform

[MODE OFF]

play/pause, file skip, fast-forward or fast-reverse from this unit.

: Control iPod from this unit.

Select a file from a folder/list

For iPod, applicable only when

[MODE OFF]

is selected.

1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip search

iPod BT source)

Press S / T to search at a preset skip search ratio. (Page12)

• Pressing and holding S / T searches at a 10% ratio.

Alphabet search

source or iPod BT source)

You can search for a file according to the first character.

(applicable only for USB/USB FRONT/USB REAR source)

(applicable only for iPod USB/iPod FRONT/iPod REAR source or

(applicable only for iPodUSB/iPod FRONT/iPod REAR

1 Turn the volume knob quickly to enter character search. 2 Turn the volume knob to select the character.

• Select “ 3 Press S / T to move to the entry position.

” to search for a character other than A to Z, 0 to 9.

• You can enter up to 3 characters. 4 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5. (Not applicable for BT AUDIO source.)

• To return to the previous setting item, press

• To cancel, press and hold

ENGLISH

USB/iPod/ANDROID

Direct Music Search

1 Press DIRECT. 2 Press the number buttons to enter a file number. 3 Press ENT IW to search for music.

• To cancel, press

• Not available if Random Play is selected.

• Not applicable for iPod USB/iPod FRONT/iPod REAR and ANDROID/ ANDROID FRONT/ANDROID REAR source.

Other settings

Press the volume knob to enter

1 2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[USB]

[MUSIC DRIVE] [DRIVE CHANGE]: The next drive ([DRIVE 1] to [DRIVE 4]) is selected

[SKIP SEARCH]

(using the remote control)

or DIRECT.

[FUNCTION]

automatically and playback starts. Repeat steps 1 to 3 to select the following drives.

[0.5%]/[1%]/[5%]/[10%]: While listening to iPod USB/iPod FRONT/ iPod REAR source (or iPod BT source), selects the skip search ratio over the total files.

Default: [XX]

AUX

Preparation:

• Select

[ON]

for

[BUILT-IN AUX]

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available)

2 Press B SRC repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to select an item, then press the knob.

[AUX]

(default)/

[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]

5 Press and hold to exit.

To return to the previous setting item, press

[SOURCESELECT]

[FUNCTION] [SYSTEM] [AUX NAME SET]

. (Page 5)

Portable audio player

, then press the knob.

ENGLISH

Pandora®

Preparation:

Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora.

• Select

[ON]

for

[PANDORASRC]

Start listening

Start up the Pandora application on your device.

1 2 Connect your device to the USB input terminal.

USB input terminal

connect to the USB cable from the rear of the unit.

3 Press B SRC repeatedly to select PANDORA/PANDORA

FRONT/PANDORA REAR.

Broadcast starts automatically.

To On the faceplate On the remote control

Play back/pause

Skip a track

Select thumbs up or thumbs down*3

*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not used. *3 If thumbs down is selected, the current track is skipped.

[SOURCESELECT]

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

/ : You can also

Press 6 IW. Press ENT IW.

Press T. Press T (+).

/ 1 . Press #FM+/ AM–.

Press 2

. (Page 5)

Create and store a new station

Press .

1 2 Turn the volume knob to select 3 Turn the volume knob to select

[NEW STATION] [FROM ARTIST]

, then press the knob.

[FROM TRACK]

, then press the knob.

A new station is created based on the current artist or current song. 4 Press and hold one of the number buttons (3, 4 or 5) to store.

To select a stored station: Press one of the number buttons (3, 4 or 5).

Search for a registered station

Press .

1 2 Turn the volume knob to select an item, then press the knob.

[SORT BYDATE] [SORT BY A-Z]

: According to the registered date

: By alphabetical order

3 Turn the volume knob (or press J/K on the remote control) to select the desired

station.

4 Press the volume knob (or press ENT IW on the remote control) to confirm.

To cancel, press and hold .

Bookmark current song information

Press and hold the volume knob.

“BOOKMARKED” appears and the information is stored to your device.

• The bookmark is available on your Pandora account but not on this unit.

Delete a station

While listening to PANDORA...

1 Press . 2 Turn the volume knob to select 3 Turn the volume knob to select

[STATION DEL] [SORT BY DATE]

, then press the knob.

[SORT BY A-Z]

, then press the knob.

4 Turn the volume knob to select the desired station to delete, then press the knob. 5 Turn the volume knob to select

[YES]

, then press the knob.

6 Press and hold to exit.

To return to the previous setting item, press

ENGLISH

iHeartRadio®

Preparation:

Install the latest version of iHeartAuto application on your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio.

• Select

[ON]

for

[IHEART SRC]

Start listening

Start up the iHeartAuto application on your device.

1 2 Connect your device to the USB input terminal.

USB input terminal

[SOURCE SELECT]

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

. (Page 5)

To On the faceplate On the remote control

Play back/pause

Skip a track for custom station

Select thumbs up or thumbs down

Create a new/custom station

Scan for live station

Press 6 IW. Press ENT IW.

Press T. Press T (+).

Press 2 / 1 .

Press and hold 1.

Press and hold 2 to start scanning.

Press and hold 2 again to listen to the station.

( Not available )

connect to the USB cable from the rear of the unit.

/ : You can also

3 Press B SRC repeatedly to select IHEARTRADIO/IHEARTRADIO-F/

IHEARTRADIO-R.

Broadcast starts automatically

*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not used.

ENGLISH

Search and store a station

Press .

1 2 Turn the volume knob to select a category, then press the knob. 3 Turn the volume knob (or press J/K on the remote control) to select

the desired station.

4 Press the volume knob (or press ENT IW on the remote control) to

confirm.

When a city list appears, you can search cities in alphabetical order by

turning the volume knob quickly.

To cancel, press and hold

To store a station: Press and hold one of the number buttons (3, 4 or 5). To select a stored station: Press one of the number buttons (3, 4 or 5).

Spotify

Preparation:

Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify.

• Select

[ON]

for

[SPOTIFY SRC]

[SOURCE SELECT]

. (Page 5)

To On the faceplate On the remote control

Random play*5 Press 3 repeatedly *3.

[SHUFFLE ON], [SHUFFLEOFF]

( Not available )

Start listening

Start up the Spotify application on your device.

1 2 Connect your device to the USB input terminal.

USB input terminal

connect to the USB cable from the rear of the unit.

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

/ : You can also

3 Press B SRC repeatedly to select SPOTIFY/SPOTIFY FRONT/SPOTIFY

REAR.

Broadcast starts automatically

To On the faceplate On the remote control

Play back/pause

Skip a track

Select thumbs up or thumbs down *4

Start radio Press and hold 5. ( Not available )

Repeat play*5 Press 4

Press 6 IW. Press ENT IW.

Press S*3 / T. Press S*3 / T (+).

/ 1 . Press #FM+/ AM–.

Press 2

repeatedly.

[REPEAT ALL], [REPEAT ONE]*3, [REPEATOFF]

( Not available )

*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not used. *3 Available for premium account users only. *4 This feature is available for tracks in Radio only. If thumbs down is selected, the current track is

skipped.

*5 Available for tracks in Playlists only.

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.

To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Search for a song or station

Press .

1 2 Turn the volume knob to select a list type, then press the knob. The list types displayed differ depending on the information sent from

Spotify.

3 Turn the volume knob (or press J/K on the remote control) to select

the desired song or station.

4 Press the volume knob (or press ENT IW on the remote control) to

confirm.

You can browse through the list quickly by turning the volume knob

quickly.

To cancel, press and hold

ENGLISH

SiriusXM® Radio

Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit <www.siriusxm.com>.

Preparation:

(for / / / )

1 Connect the optional SiriusXM Vehicle Tuner (commercially available).

Antenna

Expansion port on the rear panel

SiriusXM Vehicle Tuner

2 Check your Radio ID for activation. The SiriusXM Radio ID is required for activation and can be found by

tuning to Channel 0 as well as on the label found on the SiriusXM Vehicle Tuner and its packaging.

The Radio ID does not include the letters I, O, S or F. 3 Activate the subscription. For users in the U.S.A.: Online: Go to <www.siriusxm.com> Phone: Call 1-866-635-2349 For users in Canada: Online: Go to <www.siriusxm.ca/subscribe-now> Phone: Call 1-877-438-9677 4 Press B SRC repeatedly to select SIRIUSXM to start updating.

Start listening

Press B SRC repeatedly to select SIRIUSXM.

1 2 Press BAND repeatedly to select a band. 3 Press . “ ” lights up. 4 Turn the volume knob to select a category, then press the knob. If “ALL CHANNELS” is selected, all the available channels will be shown. 5 Turn the volume knob to select a channel, then press the knob.

(or)

Press S / T to search for a channel manually.

• Pressing and holding S / T changes the channel rapidly.

If a locked channel or a mature channel is selected, a pass code input screen appears. Enter the pass code to receive the channel. (Page 18)

Direct Access Tuning

(using the remote control)

1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a channel number. 3 Press ENT IW to search for the channel.

• To cancel, press

• If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

or DIRECT.

ENGLISH

SiriusXM® Radio

(for / / / )

SiriusXM Keymode

Press and hold the volume knob to change the keymode (channel or replay). (Default: Channel keymode)

“

” lights up when replay keymode is selected.

When channel keymode is selected...

To On the faceplate On the remote control

Select a channel

Change a channel rapidly

Store a channel of the current band

Select a stored channel of the current band

When replay keymode is selected...

To On the faceplate On the remote control

Play back/pause

Skip backward/ forward

Rewind/Fastforward

Go to Live Press 1. Press 1.

Press S / T. Press S / T (+).

Press and hold S / T.Press and hold S /

Press and hold one of the number buttons (1 to 6).

Press one of the number buttons (1 to 6).

Press 6 IW. Press ENT IW.

Press S / T. Press S / T (+).

Press and hold S / T.Press and hold S /

T (+).

( Not available )

Press one of the number buttons (1 to 6).

T (+).

SmartFavorites and TuneStart™

User stored channels are recognized as SmartFavorite channels*. The SiriusXM Vehicle Tuner automatically buffers the broadcast content in the background.

• SmartFavorites feature is available with SXV200 or later SiriusXM Vehicle Tuner.

* SXV300 (and later) SiriusXM Vehicle Tuner can use all 18 stored channels as SmartFavorites.

The SXV200 SiriusXM Vehicle Tuner can use 6 stored channels from the current band as SmartFavorites.

When you select a SmartFavorite channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content.

• Playback starts from the beginning of the song if (page 18) for most music channels stored as a SmartFavorite.

Press one of the number buttons (1 to 6) to select a stored channel.

[TUNE START]

is set to

[ON]

TuneScan™

You can get a short preview of the songs that you have missed on each of your SmartFavorites music channels or a music channel currently tuned into.

Press and hold BAND to start scanning the first 6 seconds of the recorded music contents.

• To listen to the current song, press the volume knob to stop scanning. The unit continues playing the current song.

• To select the previous/next song, press S / T.

• To cancel scanning, press and hold the volume knob. Playback returns to the channel before you entered TuneScan.

ENGLISH

SiriusXM® Radio

(for / / / )

SiriusXM settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[SIRIUS XM]

[SEEK MODE]

[CHANNEL LOCK] To unlock settings:

[CODESET]

Selects the tuning method for [CHANNEL]: Manually search for a channel. ; [PRESET]: Search for a preset channel of the selected band.

Turn the volume knob to select a number.

Press S / T to move to the entry position.

Repeat steps 1 and 2 to enter the current pass code.

(Initial pass code is 0000.)

Press the volume knob to confirm.

Turn the volume knob to select a number.

Press S / T to move to the entry position.

Repeat steps 1 and 2 to enter a new 4-digit pass code.

Press the volume knob to confirm.

Repeat steps 1 to 4 to reconfirm the pass code.

• Make a note of the new pass code to enter channel lock settings for next time.

S / T

Default: [XX]

buttons when pressed.

[LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ;

[CHANNEL EDIT]*1

[CHANNEL CLEAR]*1

[TUNE START]*2

[SIGNAL LEVEL] Shows the strength ([NO SIGNAL]/[WEAK]/[GOOD]/[STRONG]) of the

[BUFFER USAGE] Shows the memory usage ([0%] to [100%]) for Replay buffer.

[SXM RESET]

*1 Displayed only when [LOCK SETTING] is set to [USER DEFINED]. *2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports

SmartFavorites.

[USER DEFINED]: Selects the individual channels the user wants to lock. ; [OFF]: Cancels.

Turn the volume knob to select a category, then press the knob.

Turn the volume knob to select a channel you want to lock, then press

the knob. “L” appears in front of the channel number.

Press and hold to exit.

[YES]: Clears all the locked channels. ; [NO]: Cancels.

[ON]: All qualified music channels in the SmartFavorites will start

playback from the beginning of the song. ; [OFF]: Cancels.

current received signal.

[YES]: Resets all SiriusXM settings to default. ; [NO]: Cancels.

ENGLISH

BLUETOOTH®

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

– Sub Band Codec (SBC) – Advanced Audio Coding (AAC) – aptX codec (Qualcomm® aptX™) (for

Connect the microphone

Rear panel

Microphone (supplied)

Microphone input jack*

Adjust the microphone angle

Secure using cord clamps (not supplied) if necessary.

Depending on the operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit.

Pair and connect a Bluetooth device for the first time

Press B SRC to turn on the unit.

1 2 Search and select the name of your receiver (“KMM-BT5 ”/“KMM-X5 ”/“KMM-BT3 ”/

“KMM-BT2 ”/“KMR-M3 ”) on the Bluetooth device.

“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME KNOB” appears on the

display.

• For some Bluetooth devices, you may need to enter the Personal Identification Number

)

(PIN) code immediately after searching.

3 Press the volume knob to start pairing. “PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established automatically.

• / / / / : “BT1” and/or “BT2” indicator on the faceplate lights up.

•

• This unit supports Secure Simple Pairing (SSP).

• Up to five devices can be registered (paired) in total.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, see

• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.

However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and

switch between these five devices. (Page 24)

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

/ : “BT1” and/or “BT2” on the display window lights up.

[DEVICE DELETE]

on page 23.

* For the location of the microphone input terminal/microphone input

jack, refer to page 42.

ENGLISH

BLUETOOTH®

Auto Pairing

When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. –

[AUTO PAIRING]

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:

• ZONE 2 illuminates in green color and flashes.

• The unit answers the call automatically if time. (Page 21)

During a call:

•

ZONE 1 illuminates according to the settings made for

31) and ZONE 2 illuminates in green color.

• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.

is set to

[ON]

. (Page 23)

/ / / / :

[AUTO ANSWER]

/ / / / :

is set to a selected

[DISPLAY]

(page

The following operations may differ or be unavailable depending on the connected phone.

To On the faceplate On the remote control

First incoming call...

Answer a call

Reject a call

End a call

While talking on the first incoming call...

Answer another incoming call and hold the current call

Reject another incoming call

While having two active calls...

End current call and activate held call

Swap between the current call and held call

Adjust the phone volume*1

[00]

[35]

(Default:

[15]

Switch between handsfree and private talk modes*3

*1, *2, *3: See page 21.

Press volume knob or one of the number buttons (1 to 6).

Press

Turn the volume knob during a call.

)

Press 6 IW during a call.

or the

. Press .

Press

Press VOL VOL

( Not available )

*2 or

during a call.

ENGLISH

BLUETOOTH®

*1 This adjustment will not affect the volume of the other sources. *2 Press and hold VOL *3 Operations may vary according to the connected Bluetooth device.

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter 2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[MIC GAIN] [–10] to [+10] ([–4]): The sensitivity of the microphone increases as the

[NR LEVEL]

[ECHO CANCEL]

Make the setting for answering a call

Press to enter Bluetooth mode.

1 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to select the time (in seconds) for the unit to

answer the call automatically, then press the knob.

[01]

[30]

5 Press and hold to exit.

To return to the previous setting item, press

to continuously increase the volume to 15.

[FUNCTION]

number increases.

[–5] to [+5] ([0]): Adjust the noise reduction level until the least noise is being heard during a phone conversation.

[–5] to [+5] ([0]): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

[SETTINGS] [AUTO ANSWER]

, or select

[OFF]

to cancels. (Default:

, then press the knob.

[OFF]

)

Default: [XX]

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode. “(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch to the

other phone.

“(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[CALL HISTORY] (Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “I” indicates call received, “O“ indicates call made, “M” indicates call missed.

• Press DISP to change the display category (NUMBER or NAME).

• “NO DATA” appears if there is no recorded call history or call number.

Press the volume knob to call.

ENGLISH

BLUETOOTH®

[PHONE BOOK] (Applicable only if the phone supports PBAP.)

[NUMBER DIAL]

[VOICE] Speak the name of the contact you want to call or the voice command to

[LOW]/[MID]/[FULL]: Shows the strength of the battery.*

[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.*

* Functionality depends on the type of the phone used.

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

• To select the desired first letter, turn the volume knob or press

/ T, then press the knob.

Select “1” to search with numbers and select “

symbols.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• The phonebook of the connected phone is automatically transferred to the unit when pairing.

• Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other), GE (general)

• This unit can display only non-accent letters. (Accent letters such as “Ú” are shown as “U”.)

Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press S / T to move the entry position.

Repeat steps 1 and 2 until you finish entering the phone number.

Press the volume knob to call.

(or using the remote control)

Press the number buttons (0 to 9) to enter the phone number.

Press to call.

control the phone functions. (See “Make a call using voice recognition”.)

), press

” to search with

2 /

Make a call using voice recognition

Press and hold to activate the voice recognition of the connected

phone.

2 Speak the name of the contact you want to call or the voice command

to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode. 2 Turn the volume knob to select

[NUMBERDIAL]

, then press the knob.

[CALL HISTORY], [PHONE BOOK]

3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored.

To erase a contact from the preset memory, select and store a blank number.

[NUMBER DIAL]

in step 2

Make a call from memory

Press to enter Bluetooth mode.

1 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call. “NO MEMORY” appears if there is no contact stored.

ENGLISH

BLUETOOTH®

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[BT MODE]

[PHONE SELECT]* Selects the phone or audio device to connect or disconnect.

[AUDIO SELECT]*

[DEVICE DELETE]

[PIN CODE EDIT] (0000)

[RECONNECT]

[AUTO PAIRING]

* You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at

any time.

“

” appears in front of the device name when connected.

“

” appears in front of the current playback audio device.

Turn the volume knob to select a device to delete, then press the

knob.

Turn the volume knob to select [YES] or [NO], then press the knob.

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S / T to move the entry position.

Repeat steps 1 and 2 until you finish entering the PIN code.

Press the volume knob to confirm.

[ON]: The unit is automatically reconnected when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels.

[ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; [OFF]: Cancels.

Default: [XX]

[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing,

phonebook, and etc.). ; [NO]: Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display. 2 Search and select the name of your receiver (“KMM-BT5 ”/

“KMM-X5 ”/“KMM-BT3 ”/“KMM-BT2 ”/“KMR-M3 ”) on the Bluetooth device.

3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold B SRC to turn off the unit.

ENGLISH

BLUETOOTH®

BLUETOOTH — Audio

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Audio player via Bluetooth

Press B SRC repeatedly (or press SRC on the remote control) to select

BTAUDIO.

• Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback.

To On the faceplate On the remote control

Play back/pause

Select group or folder

Reverse skip/ Forward skip

Reverse/Fastforward

Press 6 IW. Press ENT IW.

/ 1 . Press #FM+/ AM–.

Press 2

Press S / T. Press S / T (+).

Press and hold S / T. Press and hold S /

T (+).

To On the faceplate On the remote control

Repeat play Press 4 repeatedly.

[ALLREPEAT], [FILEREPEAT], [REPEATOFF]

Random play Press and hold 3

Select a file from a folder/list

Switch between connected Bluetooth audio devices

* Pressing the “Play” key on the connected device itself also causes switching of sound output

from the device.

Operations and display indications may differ according to their availability on the connected device.

[ALLRANDOM]

•

Press 3 to select

[RANDOMOFF].

Refer to “Select a file from a folder/list” on page 11.

Press 5.*

to select

( Not available )

ENGLISH

BLUETOOTH®

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).

• For

KENWOOD Remote application is connected.

Preparation:

• Install the latest version of KENWOOD Remote application on your device before connecting.

• For more information, visit <www.kenwood.com/cs/ce/>.

1 Press the volume knob to enter

/ / / /

, “R.APP” indicator on the display window lights up when

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[REMOTE APP]

[SELECT] Selects the device (IOS or ANDROID) to use the application.

[IOS]

[YES]: Selects iPhone/iPod to use the application via Bluetooth or connected

via USB input terminal. ; [NO]: Cancels. If IOS is selected, select iPod BT source (or iPod source if your iPhone/iPod is connected via USB input terminal) to activate the application.

• The connectivity of the application will be interrupted or disconnected if: – You change from iPod BT source to any playback source connected via

the USB input terminal.

– You change from iPod

source.

USB/iPod FRONT/iPod REAR source to iPod BT

Default: [XX]

USB/iPod FRONT/iPod REAR

[ANDROID] [YES]: Selects Android smartphone to use the application via Bluetooth. ;

[NO]: Cancels.

[ANDROID LIST]* Selects the Android smartphone to use from the list.

[STATUS] Shows the status of the selected device.

[IOS CONNECTED]: You are able to use the application using the iPhone/

iPod connected via Bluetooth or USB input terminal.

[IOS NOT CONNECTED]: No IOS device is connected to use the application. [ANDROID CONNECTED]: You are able to use the application using the

Android smartphone connected via Bluetooth. [ANDROID NOT CONNECTED]: No Android device is connected to use the application.

* Displayed only when [ANDROID] of [SELECT] is set to [YES].

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.

Press B SRC repeatedly to select iPodBT.

• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal. (Page 10)

• If you plug in an iPhone/iPod to the USB input terminal while listening to iPod BT source, the source automatically changes to iPod USB/ iPod FRONT/iPod REAR. Press B SRC to select iPod BT if the device is still connected via Bluetooth.

ENGLISH

BLUETOOTH®

Internet radio via Bluetooth

You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the iPhone/iPod touch/Android device via Bluetooth on this unit.

• Make sure the USB input terminal is not connected to any device.

Listen to Pandora

Preparation:

Select

[ON]

for

[PANDORA SRC]

[SOURCE SELECT]

. (Page 5)

1 Start up the Pandora application on your device. 2 Connect your device via Bluetooth connection. (Page19) 3 Press B SRC repeatedly to select PANDORA (for iPhone/iPod) or

PANDORA BT (for Android device).

The source switches and broadcast starts automatically.

• You can operate Pandora in the same way as Pandora via USB input terminal. (Page 13)

Listen to iHeartRadio

Preparation:

Select

[ON]

for

[IHEART SRC]

[SOURCE SELECT]

. (Page 5)

1 Start up the iHeartAuto application on your device. 2 Connect your device via Bluetooth connection. (Page19) 3 Press B SRC repeatedly to select IHEARTRADIO. The source switches and broadcast starts automatically.

• You can operate iHeartRadio in the same way as iHeartRadio via USB input terminal. (Page 14)

Listen to Spotify

Preparation:

Select

[ON]

for

[SPOTIFY SRC]

[SOURCE SELECT]

. (Page 5)

1 Start up the Spotify application on your device. 2 Connect your device via Bluetooth connection. (Page19) 3 Press B SRC repeatedly to select SPOTIFY (for iPhone/iPod) or

SPOTIFY BT (for Android device).

The source switches and broadcast starts automatically.

• You can operate Spotify in the same way as Spotify via USB input terminal. (Page 15)

ENGLISH

+ 110 hidden pages

Kenwood KMM-BT525HD, KMM-X503, KMR-M325BT, KMM-BT225U, KMM-BT325U Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual