Kenwood KMM-BT506DAB Instruction Manual

KMM-BT506DAB

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates and upgrades) on condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement, unless otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any other intellectual property right that was caused by the User's use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment,

provisional disposition or any other compulsory execution.

i

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or settled upon good-faith consultation between the Licensor and the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from, and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

-jansson

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-cJSON

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

ii

-CMP

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/

You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

Developed at SunPro, a Sun Microsystems, Inc. business. Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is preserved.

License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.

iii

Author: Chris G. Demetriou

Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation.

CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.

Carnegie Mellon requests users of this software to return to

Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU School of Computer Science Carnegie Mellon University Pittsburgh PA 15213-3890

any improvements or extensions that they make and grant Carnegie the rights to redistribute these changes. License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm" in all material mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty of any kind.

You may redistribute unmodified or modified versions of this source code provided that the above copyright notice and this and the following conditions are retained.

This software is provided ``as is'', and comes with no warranties of any kind. I shall in no event be liable for anything that happens to anyone/anything when using this software. These notices must be retained in any copies of any part of this documentation and/or software.

T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org)

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

You may obtain a copy of the license at https://directory.fsf.org/wiki/License:BSD-4-Clause

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Accordo2 Player Apache License Licensed under the Apache License, Version 2.0, January 2004(the "License"); You may obtain a copy of the license at http://www.apache.org/licenses/LICENSE-2.0

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

iv

Contents

Before Use ................................................................................................. 3

Basics ......................................................................................................... 4

Getting Started ........................................................................................ 5

1 Cancel the demonstration

2 Set the clock and date

3 Set the other optional settings

Digital Radio ............................................................................................. 7

Analog Radio ............................................................................................ 9

USB/iPod ................................................................................................. 11

Spotify ..................................................................................................... 13

AUX........................................................................................................... 15

Using Other Applications .....................................................................15

KENWOOD Remote application

TuneIn Radio/TuneIn Radio Pro

Bluetooth® .............................................................................................. 17

Bluetooth – Connection

Bluetooth – Mobile phone

Bluetooth – Audio

AMAZON ALEXA .................................................................................... 23

Audio Settings ........................................................................................24

Display Settings ..................................................................................... 29

Installation/Connection ....................................................................... 30

References .............................................................................................. 37

Maintenance

More information

Change the display information

Troubleshooting .................................................................................... 38

Specifications ......................................................................................... 41

2

ENGLISH

Before Use

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual.

• Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

CAUTION

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

• USB rating is indicated on the main unit. To view, detach the faceplate. (Page 4)

• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected (page33). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

How to read this manual

• The displays and faceplates shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or faceplates.

• Operations are explained mainly using buttons on the faceplate.

•

[XX]

indicates the selected items.

• (PageXX) indicates references are available on the stated page.

This symbol on the product means there are important operating and maintenance instructions in this manual. Be sure to carefully read instructions in this manual.

ENGLISH

3

Basics

Faceplate

Attach

Volume knob

Detach button Display window*

* Only for illustration purpose.

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information Press DISP repeatedly. (Page 38)

4

ENGLISH

Press B SRC.

• Press and hold to turn off the power.

• Press B SRC repeatedly.

• Press B SRC, then turn the volume knob within 2 seconds.

Lights up when

Detach

Bluetooth connection is established. (Page17)

How to reset

Reset the unit within 5 seconds after detaching the faceplate.

Getting Started

1

Cancel the demonstration

When you turn on the power for the first time (or

[YES]

, see page6), the display shows: “CANCEL DEMO” “PRESS”

“VOLUME KNOB”

1 Press the volume knob.

[YES]

is selected for the initial setup.

2 Press the volume knob again. “DEMO OFF” appears.

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type” on page6.

2

Set the clock and date

Press the volume knob to enter

1 2 Turn the volume knob to select

[FUNCTION] [CLOCK]

[FACTORY RESET]

.

, then press the knob.

is set to

To adjust the clock

3 Turn the volume knob to select

[CLOCKADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob. Set the time in the order of “Hour” “Minute”. 5 Turn the volume knob to select 6 Turn the volume knob to select

To set the date

7 Turn the volume knob to select 8 Turn the volume knob to select

the knob.

9 Turn the volume knob to select

[CLOCK FORMAT] [12H]

or

[24H]

[DATEFORMAT] [DD/MM/YY]

[DATESET]

, then press the knob.

or

[MM/DD/YY]

, then press

10 Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day” “Month” “Year” or “Month” “Day”

“Year”.

11 Press and hold to exit.

To return to the previous setting item, press

3

Set the other optional settings

You can only set the following items while the unit is in STANDBY source.

.

1 Press B SRC repeatedly to enter STANDBY. 2 Press the volume knob to enter

[FUNCTION]

.

3 Turn the volume knob to select an item (page 6), then press the

knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press

.

ENGLISH

5

Getting Started

[DISPLAY]

[EASY MENU] When entering [FUNCTION]...

[TUNER SETTING]

[DAB ANT POWER]

[PRESET TYPE]

[SYSTEM]

[KEY BEEP]

[TDF ALARM] (Applicable only if [X’OVER] is set to [2WAY].)

[SOURCE SELECT]

[SPOTIFY SRC]

[BT AUDIO SRC]

[BUILT-IN AUX] [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 15)

[ON]: [ZONE 1] illumination changes to white color. ; [OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.

(Page 29)

• [ZONE 2] illumination changes to light blue color when you enter [FUNCTION], irregardless of the [EASY MENU] setting.

• Refer to the illustration on page 29 for zone identification.

[ON]: Supplies power to the DAB antenna. ; [OFF]: Does not supply power. Selects when using passive antenna without booster. (Page 34)

[NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM/DB1/DB2/DB3). ; [MIX]: Memorizes one station (digital radio or analog radio) for each preset button, regardless of the selected band.

(Applicable only if [X’OVER] is set to [2WAY].)

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[ON]: Activates the alarm if you forget to detach the faceplate when ACC is set to OFF. ; [OFF]: Deactivates.

[ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables. (Page 13)

[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables. (Page 22)

Default: [XX]

[F/W UPDATE]

[UPDATE SYSTEM]/ [UPDATE DAB]

[F/W UP xxxx]/ [F/W UP xxxxx]

[FACTORY RESET]

[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not

activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.

[YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.

Change the crossover type

Press B SRC repeatedly to enter STANDBY.

1 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select “2WAY” or “3WAY”, then press the

knob.

4 Turn the volume knob to select “YES” or “NO”, then press the knob. The selected crossover type appears.

• To cancel, press and hold

• To adjust the selected crossover settings, see page 26.

.

CAUTION

Select a crossover type according to how the speakers are connected. (Page32, 33)

If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

6

ENGLISH

Digital Radio

About DAB (Digital Audio Broadcasting)

DAB is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text, pictures and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble.” The “primary component” (main radio station) is sometimes accompanied by a “secondary component” which can contain extra programs or other information.

Search for an ensemble

Press B SRC repeatedly to select DIGITAL AUDIO.

1 2 Press BAND repeatedly to select DB1/DB2/DB3. 3 Press and hold S / T to search for an ensemble. 4 Press S / T to select an ensemble, service or component to listen.

You can store up to 18 services.

• To store a service: Press and hold one of the number buttons (1 to 6).

• To select a stored service: Press one of the number buttons (1 to 6).

Select a service

Press to enter Service Search mode.

1 2 Turn the volume knob to select a service, then press the knob.

To cancel the Service Search mode, press

again.

Preparation:

1 Connect the supplied DAB antenna to the DAB antenna jack.

(Page32)

2 Press B SRC repeatedly to select DIGITAL AUDIO. 3 Press and hold (LIST UPDATE) to start the Service List update. “LIST UPDATE” appears and update starts. “UPDATED” appears when

update completes.

Updates take up to 3 minutes. No interruption (such as traffic

information) is possible during updates.

• To cancel the Service List update: Press and hold again.

• “DGTL” lights up when receiving DAB digital signal and flashes when receiving a RDS signal.

• The unit switches to DAB alarm automatically when receiving an alarm signal from DAB broadcast.

(LIST UPDATE)

Select a service by name

Press to enter Service Search mode.

1 2 Turn the volume knob quickly to enter Alphabet Search mode. 3 Turn the volume knob or press S / T to select the character to be

searched for.

• Press 1 / 2 to go to the previous/next page. 4 Press the volume knob to start searching. 5 Turn the volume knob to select a service, then press the knob.

To cancel the Alphabet Search mode, press

again.

ENGLISH

7

Digital Radio

Other settings

Press the volume knob to enter

1

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[TUNER SETTING]

[SEEK MODE]

[AF SET]

[TI]

[PTY SEARCH]

Selects the searching method for S / T buttons when pressed. [AUTO1]: Select an ensemble, service or component. Pressing and holding

S

/ T automatically search for an ensemble. ; [AUTO2]: Search for a preset service. ; [MANUAL]: Select an ensemble, service or component. Pressing and holding

[ON]: While listening to DAB: Automatically switch to FM broadcasting the same program if the DAB signal becomes weak. It will switch back to DAB sound when the signal becomes strong again. While listening to FM: Automatically switch to DIGITAL AUDIO source broadcasting the same program (if available). ;

[OFF]: Cancels.

[ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” indicator lights up). ; [OFF]: Cancels.

1

Turn the volume knob to select the available Program Type (see

“Available Program Type for [PTY SEARCH]” on page 9), then press the knob.

2

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

3

Press S / T to start searching.

S

/ T manually search for an ensemble.

.

Default: [XX]

[ASW SELECT] [TRAVEL], [WARNINGS], [NEWS], [WEATHER], [EVENT], [SPECIAL],

[LIST UPDATE]

[PTY WATCH]

[RELATED SERV]

[CLOCK]

[TIME SYNC]

[RAD INFO], [SPORTS], [FINANCE]: Turn the volume knob to make a

selection, then press the knob. “

” appears in front of the activated announcement type. Automatically switch from any source to Digital radio ensembles broadcasting an activated announcement type.

• Multiple announcement can be activated simultaneously.

• To deactivate, press the volume knob again (“

[AUTO]: Automatically update the DAB Service List when the power is turned on. ; [MANUAL]: Updates the DAB Service List by pressing and holding

1

Turn the volume knob to select the available Program Type, then press

The unit automatically switch from any source to Digital Radio ensembles

broadcasting the selected type of program. Program Type: [NEWS], [AFFAIRS], [INFO], [SPORT], [EDUCATE], [DRAMA],

[CULTURE], [SCIENCE], [VARIED], [POP M] (music), [ROCK M] (music),

[EASY M] (music), [LIGHT M] (music), [CLASSICS], [OTHER M]

(music), [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION],

[PHONEIN], [TRAVEL], [LEISURE], [JAZZ], [COUNTRY], [NATION M]

(music), [OLDIES], [FOLK M] (music), [DOCUMENT] [OFF]: Cancels.

2

Press the volume knob to enter PTY language selection.

3

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

[ON]: Enable Soft-Link function to switch to an alternative service which is different audio program from the current audio program. ; [OFF]: Disable.

[ON]: Synchronizes the unit’s time to the Digital Radio station time. ; [OFF]: Cancels.

(LIST UPDATE).

.

” goes off).

8

ENGLISH

Digital Radio

• If the volume is adjusted during reception of traffic information, announcement, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, announcement, alarm or news bulletin is turned on.

Analog Radio

Available Program Type for

[SPEECH]

:

[NEWS], [AFFAIRS], [INFO] [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION] [PHONEIN], [TRAVEL], [LEISURE], [DOCUMENT]

:

[MUSIC] [POPM]

(music),

[CLASSICS], [OTHERM] [FOLKM]

The unit will search for the Program Type categorized under

[MUSIC]

[ROCKM]

(music),

(music)

if selected.

[PTY SEARCH]

(information),

(music),

[SPORT], [EDUCATE], [DRAMA], [CULTURE]

[EASYM]

[JAZZ], [COUNTRY], [NATIONM]

(music),

[LIGHTM]

(music),

[SPEECH]

,

[OLDIES]

or

,

• “ST” indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.

• The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast.

,

Search for a station

Press B SRC repeatedly to select RADIO.

1 2 Press BAND repeatedly to select FM1/FM2/FM3/AM. 3 Press S / T to search for a station.

You can store up to 18 stations for FM and 6 stations for AM.

• To store a station: Press and hold one of the number buttons (1 to 6).

• To select a stored station:

Press one of the number buttons (1 to 6).

Other settings

Press the volume knob to enter

1

[FUNCTION]

.

2 Turn the volume knob to select an item (page 10), then press the

knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

.

ENGLISH

9

Analog Radio

[TUNER SETTING]

[SEEK MODE]

[LOCAL SEEK]

[AUTO MEMORY]

[MONO SET]

[NEWS SET]

[REGIONAL]

[AF SET]

[TI]

[PTY SEARCH]

Default: [XX]

Selects the searching method for S / T buttons when pressed. [AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset station. ; [MANUAL]: Manually search for a station.

[ON]: Searches only AM stations with good reception. ; [OFF]: Cancels.

• Settings made are applicable only to the selected source/station. Once you change the source/station, you need to make the settings again.

[YES]: Automatically starts memorizing 6 stations with good reception. ; [NO]: Cancels.

• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)

[ON]: Improves the FM reception, but the stereo effect will be lost. ; [OFF]: Cancels.

[ON]: The unit will temporarily switch to News Programme if available. ; [OFF]: Cancels.

[ON]: Switches to another station only in the specific region using the “AF” control. ; [OFF]: Cancels.

[ON]: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception when the current reception is poor. ; [OFF]: Cancels.

[ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” indicator lights up). ; [OFF]: Cancels.

• [TI] in AM band is for enabling traffic interruption to DIGITAL AUDIO source only.

1

Turn the volume knob to select the available Program Type (see the

following“Available Program Type for [PTY SEARCH]”), then press the knob.

2

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

3

Press S / T to start searching.

•

[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[PTY SEARCH]

when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

Available Program Type for

[SPEECH]

:

[NEWS], [AFFAIRS], [INFO] [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION] [PHONEIN], [TRAVEL], [LEISURE], [DOCUMENT]

:

[MUSIC] [POPM]

(music),

[CLASSICS], [OTHERM] [FOLKM]

The unit will search for the Program Type categorized under

[MUSIC]

[ROCKM]

(music),

(music)

if selected.

[PTY SEARCH]

(information),

(music),

[SPORT], [EDUCATE], [DRAMA], [CULTURE]

[EASYM]

[JAZZ], [COUNTRY], [NATIONM]

(music),

is selectable only

[LIGHTM]

(music),

[SPEECH]

,

[OLDIES]

or

,

10

ENGLISH

USB/iPod

Connect a USB device

USB input terminal

The source changes to USB automatically and playback starts.

* Do not leave the cable inside the car when not in use.

CA-U1EX (max.: 500 mA)

(optional accessory)*

Connect an iPod/iPhone

USB input terminal

The source changes to iPod USB automatically and playback starts.

• You can also connect iPod/iPhone via Bluetooth. (Page17)

*1 KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not in use.

KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

USB device

iPod/ iPhone

To On the faceplate

Play back/pause

Reverse/Fast-forward

Select a file

Select a folder*1 Press 2

Repeat play*2 Press 4

Random play*2 Press 3

*1 This does not work for iPod. *2 For iPod: Applicable only when [MODE OFF] is selected. (Page 12)

Press 6 IW.

Press and hold S / T.

Press S / T.

/ 1 .

repeatedly.

[FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT]

WMA/AAC/WAV/FLAC file

[REPEAT ONE]/[REPEAT ALL]/[REPEAT OFF]

repeatedly.

[FOLDERRANDOM]/[RANDOM OFF]

AAC/WAV/FLAC file

[SHUFFLE ON]/[SHUFFLE OFF]

Press and hold 3

: iPod

to select

: iPod

: MP3/WMA/

[ALL RANDOM]

: MP3/

.*1

ENGLISH

11