Kenwood KDC-MP4026G, KDC-MP4026 User Manual

KDC-MP4026

COMPACT

DIGITAL AUDIO

KDC-MP4026G

CD-RECEIVER

INSTRUCTION MANUAL

Safety precautions......................3

About CDs...................................5

English

Notes on playing MP3/WMA.......6

General features .........................8

Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Switching Display Station/Disc Naming (SNPS/DNPS) Theft Deterrent Faceplate TEL Mute

Tuner features ...........................13

Tuning Mode Tuning Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting

CD/MP3/WMA/External disc

control features .....................16

Playing CD & MP3/WMA Playing External Disc Fast Forwarding and Reversing Track/File Search Disc/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Text/Title Scroll DNPP (Disc Name Preset Play)

Menu system.............................20

Menu System Touch Sensor Tone Manual Clock Adjustment DSI (Disabled System Indicator) CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting &

Station/Disc Naming Text Scroll CD Read Setting

Basic Operations of remote......23

Accessories ...............................25

Installation Procedure ..............25

Connecting Wires to Terminals ....

................................................26

Installation ................................27

Troubleshooting Guide .............29

Specifications ...........................32

— 2 —

Safety precautions

2WARNING

To prevent injury or fire, take the following precautions:

• Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted.

• When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.75mm (AWG18) or more to prevent wire deterioration and damage to the wire coating.

•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.

• Make sure not to get your fingers caught between the faceplate and the unit.

• Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts.

• Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

2CAUTION

To prevent damage to the machine, take the following precautions:

• Make sure to ground the unit to a negative 12V DC power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

• Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers.

• Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.

• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

•To prevent a short circuit when replacing a fuse, first disconnect the wiring harness.

• Do not place any object between the faceplate and the unit.

• Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

IMPORTANT INFORMATION

About CD players/disc changers connected to this unit

KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected.

You can damage both your unit and the CD changer if you connect them incorrectly.

Do Not Load 3-in. CDs in the CD slot

If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.

— 3 —

NOTE

• If you experience problems during installation, consult your Kenwood dealer.

English

• If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.

•Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored.

EXTERNAL MEDIA CONTROL

AME

• Characters in the LCD may become difficult to read in temperatures below 41 ˚F (5 ˚C).

• The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation.

AUD

AUTO

OFF

Reset button

RDM REP M.RDM

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth.

Cleaning the CD Slot

As dust tends to accumulate in the CD slot, clean it every once in a while. Your CDs can get scratched if you put them in a dusty CD

Cleaning the Unit

slot.

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off.

Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the

SCR

faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch

F.SELSCAN

DISP MENU

the surface or erases characters.

The marking of products using lasers (Except for some areas)

CLASS 1 LASER PRODUCT

Lens Fogging

Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

— 4 —

About CDs

Handling CDs

• Don’t touch the recording surface of the CD.

CD cleaning

Clean from the center of the disc and move outward.

• CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc.

• Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it.

When using a new CD

If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc.

Burrs

CD accessories

Don’t use disc type accessories.

Removing CDs

When removing CDs from this unit pull them out horizontally.

CDs that can’t be used

• CDs that aren’t round can’t be used.

• CDs with coloring on the recording surface or that are dirty can’t be used.

• This unit can only play the CDs with

It may not correctly play disks which do not have the mark.

•A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.)

CD storage

• Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high.

• Store CDs in their cases.

— 5 —

Notes on playing MP3/WMA

This unit can play MP3(MPEG1, 2 Audio Layer 3)/WMA. Note, however, that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions.

English

Acceptable media

The MP3/WMA recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW. When using CD-RW, do full format not quick format to prevent malfunction.

Acceptable medium formats

The following formats are available for the media used in this unit. The maximum number of characters used for file name including the delimiter (".") and three-character extension are indicated in parentheses.

• ISO 9660 Level 1 (12 characters)

• ISO 9660 Level 2 (31 characters)

• Joliet (64 character; Up to 32 characters are displayed)

• Romeo (128 character; Up to 64 characters are displayed)

• Long file name (200 characters; Up to 64 characters are displayed)

• Maximum number of characters for folder name: 64 (Joliet; Up to 32 characters are displayed)

For a list of available characters, see the instruction manual of the writing software and the section Entering file and folder names below. The media reproducible on this unit has the following limitations:

• Maximum number of directory levels: 8

• Maximum number of files per folder: 255

• Maximum number of folders: 50

• Maximum number of files and folders: 512

MP3/WMA written in the formats other than the above may not be successfully played and their file names or folder names are not properly displayed.

Settings for your MP3/WMA encoder and CD writer

Do the following setting when compressing audio data in MP3/WMA data with the MP3/WMA encoder.

•Transfer bit rate MP3: 8 —320 kbps

• Sampling frequency

WMA: 48 —192 kbps

MP3: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz WMA: 32, 44.1, 48 kHz

When you use your CD writer to record MP3/WMA up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to the maximum capacity at once, check Disc at Once.

Play mode may not be possible when portions of the functions of Windows Media Player 9 or higher are used.

Entering ID3 tag

The Displayable ID3 tag is ID3 version

1.x. For the character code, refer to the List of Codes.

Entering file and folder names

The code list characters are the only file names and folder names that can be entered and displayed. If you use any other character for entry, the file and folder names are not displayed correctly. They may neither be displayed correctly depending on the CD writer used. The unit recognizes and plays only those MP3/WMA which have the MP3/WMA extension (.MP3/.WMA).

A file with a name entered with characters not on the code list may not play correctly.

Writing files into a medium

When a medium containing MP3/WMA data is loaded, the unit checks all the data on the medium. If the medium contains a lot of folders or non-MP3/WMA files, therefore, it takes a long time until the unit starts playing MP3/WMA. In addition, it may take time for the unit to move to the next MP3/WMA file or a File Search or Folder Search may not be performed smoothly.

Loading such a medium may produce loud noise to damage the speakers.

• Do no attempt to play a medium containing a non-MP3/WMA with the MP3/WMA extension. The unit mistakes non-MP3/WMA they have the MP3/WMA extension.

• Do not attempt to play a medium containing non MP3/WMA.

— 6 —

files for MP3/WMA data as long as

file

MP3/WMA playing order

4 Button ¢ Button AM Button FM Button

Operation of the button

Current

folder number

AM Button FM Button

Operation of the button

Current

folder number

Current

file number

4 Button

¢ Button

Operation of the button

Beginning of file

Folder

Example of a medium's folder/file hierarchy

Level 2 Level 4

Level 1 Level 3

File

Root

When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99", depending on your CD writer.

For example, a medium with the following folder/ file hierarchy is subject to Folder Search, File Search, or Folder Select as shown below.

When a File Search is executed with file ¡$ being played ...

When a Folder Search is executed with file ¡$ being played ...

When Folder Select is selected with file ¡$ being played to move from folder to folder ...

— 7 —

General features

English

Release button

ATT/

LOUD

AUD

AUTO

AME

AUD

OFF

SRC

EXTERNAL MEDIA CONTROL

RDM REP M.RDM

F.SE LSCAN

LOUD indicator

ATT indicator

SCRL

DISP MENU

DISP/

Power

¢4

Turning ON the Power

Press the [SRC] button.

Turning OFF the Power

Press the [SRC] button for at least 1 second.

Selecting the Source

Press the [SRC] button.

Source required Display

Tuner "TUNER" CD "CD" External disc (Optional accessory) "CD CH" Auxiliary input (Optional accessory)"AUX EXT" Standby (Illumination only mode) "STANDBY"

Volume

Increasing Volume

Press the [u] button.

Decreasing Volume

Press the [d] button.

— 8 —

Attenuator

Turning the volume down quickly.

Press the [ATT] button.

Each time the button is pressed the Attenuator turns ON or OFF. When it’s ON, the "ATT" indicator blinks.

Loudness

Compensating for low and high tones during low volume.

Press the [LOUD] button for at least 1 second.

Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it’s ON, "LOUD" indicator is ON.

System Q

You can recall the best sound setting preset for different types of music.

1 Select the source to set

Press the [SRC] button.

2 Select the Sound type

Press the [Q] button.

Each time the button is pressed the sound setting switches.

Sound setting Display

Flat "FLAT" Rock "ROCK" Top 40 "TOP40" Pops "POPS" Jazz "JAZZ" Easy "EASY"

• Each setting value is changed with the <Speaker setting> (page

10). First, select the speaker type with the Speaker setting.

• When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values.

— 9 —

General features

Audio Control

1 Select the source for adjustment

English

Press the [SRC] button.

2 Enter Audio Control mode

Press the [AUD] button for at least 1 second.

3 Select the Audio item for adjustment

Press the [FM] or [AM] button.

Each time the button is pressed the items that can be adjusted switch as shown below.

4 Adjust the Audio item

Press the [4] or [¢] button.

Adjustment Item Display Range

Bass level "BAS" –8 — +8 Middle level "MID" –8 — +8 Treble level "TRE" –8 — +8 Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15

5 Exit Audio Control mode

Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type.

2 Enter Speaker Setting mode

Press the [Q] button.

3 Select the Speaker type

Press the [4] or [¢] button.

Each time the button is pressed the setting switches as shown below.

Speaker type Display

OFF "SP OFF" For the OEM speaker "SP OEM" For 6 & 6x9 in. speaker "SP 6/6x9" For 5 & 4 in. speaker "SP 5/4"

4 Exit Speaker Setting mode

Press the [Q] button.

Switching Display

Switching the information displayed.

Press the [DISP] button.

Each time the button is pressed the display switches as shown below.

In Tuner source

Information Display

Frequency Station name or Frequency "SNPS" Clock

1 Enter Standby

Press the [SRC] button.

Select the "STANDBY" display.

— 10 —

+ 22 hidden pages

Kenwood KDC-MP4026G, KDC-MP4026 User Manual

Contents

Safety precautions

About CDs

Notes on playing MP3/WMA

General features