Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of
handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper
recycling and waste disposal will help conserve resources whilst preventing detrimental effects
on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien
(anzuwenden in den Ländern der Europäischen Union und anderen europäischen
Ländern mit einem separaten Sammelsystem für solche Geräte)
Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf
hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an
einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien
abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und
die Gesundheit Ihrer Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere
Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den
kommunalen Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei
enthalt.
For Israel
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU Representative:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC
Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU
Hersteller:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU-Vertreter:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande
i
The marking of products using lasers
The label is attached to the chassis/case and says that the component uses laser beams that
have been classified as Class1. It means that the unit is utilizing laser beams that are of a
weaker class. There is no danger of hazardous radiation outside the unit.
Kennzeichnung von Geräten mit Laser-Abtastern
Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente
Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf
hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören.
Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche
Strahlungen außerhalb des Geräts besteht.
For Turkey
Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin
Kontrolü Yönetmeliğe uygun olarak üretilmiştir.
Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (ayrı atık
toplama sistemlerini kullanan ülkeleri için uygulanabilir)
Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak
atılamaz.
Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri
dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye
en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara
müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve
çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da
yardımcı olacaktır.
ii
CONTENTSBEFORE USE
BEFORE USE 2
BASICS 3
GETTING STARTED 4
RADIO 5
CD / USB / iPod 6
AUX 8
AUDIO SETTINGS 9
DISPLAY SETTINGS 10
MORE INFORMATION 10
TROUBLESHOOTING 11
INSTALLATION /
CONNECTION 12
SPECIFICATIONS 15
How to read this manual
• Operations are explained mainly
using buttons on the faceplate.
•
[XX]
indicates the selected items.
•
( XX)
indicates references are
available on the stated page.
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the USB device or iPod/iPhone if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short
circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
Remote control (RC-406):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or
equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used
batteries promptly. If swallowed, contact a physician immediately.
Maintenance
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector
gently with a cotton swab, being careful not to damage the connector.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
Connector (on the reverse
side of the faceplate)
2
BASICS
Faceplate
Volume knob
(turn/press)
Attach
Display windowLoading slot
Detach
Remote control (RC-406)
(supplied for
* Not used.
KDC-130Y
Remote sensor (Do
not expose to bright
sunlight.)
)
Detach
button
KDC-361U
KDC-261UB
KDC-261UR
How to reset
How to replace the battery
Your preset adjustments
will also be erased.
Pull out the insulation sheet
when using for the first time.
ToDo this (on the faceplate)Do this (on the remote control)
Turn on the powerPress LSRC.
Adjust the volumeTurn the volume knob.Press VOL
Select a sourcePress LSRC repeatedly.Press SRC repeatedly.
Change the display
information
• Press and hold to turn off the power.
Press DISPSCRL repeatedly.
• Press and hold to scroll the current display information.
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
or VOL .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
( not available )
ENGLISH |
3
GETTING STARTED
1
Select the display language and cancel the
demonstration
When you turn on the power (or after you reset the unit), the
display shows: “SELLANGUAGE”
1 Turn the volume knob to select
[RUS] (Russian)
[ENG]
Then, the display shows: “CANCELDEMO” “PRESS”
“VOLUMEKNOB”
, then press the knob.
is selected for the initial setup.
2 Press the volume knob.
[YES]
is selected for the initial setup.
3 Press the volume knob again.
“DEMOOFF” appears.
2
Set the clock
Press the volume knob to enter
1
2 Turn the volume knob to select
knob.
3 Turn the volume knob to select
the knob.
4 Turn the volume knob to make the settings, then press the
knob.
Day
Hour Minute
5 Turn the volume knob to select
the knob.
4
“PRESS” “VOLUMEKNOB”
[ENG]
(English) or
[FUNCTION]
[CLOCK]
[CLOCK ADJUST]
[CLOCK FORMAT]
.
, then press the
, then press
, then press
6 Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
7 Press and hold to exit.
(or)
1 Press and hold DISP SCRL to enter clock adjustment mode directly while in
clock display screen.
2 Turn the volume knob to make the settings, then press the knob.
Day
To return to the previous setting item or hierarchy, press
1
2 Press the volume knob to enter
3
Hour Minute
.
3
Set the initial settings
Press SRC to enter STANDBY.
Turn the volume knob to make a selection (see the following table), then press
the knob.
[FUNCTION]
.
4 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default:
AUDIO CONTROL
SWITCH PREOUT
SP SELECTOFF/ 5/4/ 6 × 9/6/ OEM
DISPLAY
EASY MENU
TUNER SETTING
PRESET TYPE
(Except for
KDC-100Q
REAR/ SUB-W
line out terminals on the rear (through an external amplifier).
6×9inches or 6inches) or OEM speakers for optimum performance.
KDC-361U
(For
ON
:Both display and button illumination change to white color when entering
[FUNCTION]
SELECT]
color.
NORMAL
: Memorizes one station for each preset button in each band (FM1/ FM2/
FM3/ MW/ LW). ;
the selected band.
)
: Selects whether rear speakers or a subwoofer are connected to the
: Selects according to the speaker size (5inches or 4inches,
KDC-130Y
/
.;
OFF
:Both display and button illumination remain as
( 10)
MIX
)
: Memorizes one station for each preset button, regardless of
[COLOR
XX
SYSTEM
KEY BEEP
SOURCE SELECT
BUILT-IN AUX
RUSSIAN SET
P-OFF WAIT
CD READ1
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx
GETTING STARTEDRADIO
ON
:Activates the keypress tone.;
OFF
:Deactivates.
ON
:Enables AUX in source selection.;
OFF
:Disables.
( 8)
Selects the display language for
[FUNCTION]
(folder name, file name, song title, artist
name, album name) if applicable.
RUSSIAN OFF
English.;
language is Russian.
Applicable only when the demonstration
mode is turned off.
Sets the duration when the unit will
automatically turns off (while in standby
mode) to save the battery.
20M
60M
audio file disc and music CD.;
to play as an music CD. No sound can be
heard if an audio file disc is played.
YES
NO
For details on how to update the
firmware, see: www.kenwood.com/
cs/ce/
menu and Tag information
:Display language is
РУССКИЙ BКЛ
: 20minutes;
: 60minutes;
:Automatically distinguishes between
:Starts upgrading the firmware.;
:Cancels (upgrading is not activated).
:Display
40M
: 40minutes;
OFF – – –
: Cancels
2
: Forces
Search for a station
Press LSRC to select TUNER.
1
2 Press BAND repeatedly (or press
LW.
AM–/#FM+ on RC-406) to select FM1/ FM2/ FM3/ MW/
*
3 Press / (or press / (+) on RC-406) to search for a station.
• To change the searching method for / : Press SEEK repeatedly.
AUTO1: Automatically search for a station.
AUTO2: Automatically search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6) (or press one of the number
buttons (1to6) on RC-406).
Direct Access Tuning (using RC-406) (for
KDC-130Y
)
1 Press DIRECT to enter Direct Access Tuning.
“– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.
2 Press the number buttons to enter a frequency.
3 Press ENT to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10seconds after step
2, Direct Access Tuning is automatically canceled.
Other settings
Press the volume knob to enter
1
[FUNCTION]
.
2 Turn the volume knob to make a selection (see the following table), then press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
ENGLISH |
5
RADIOCD / USB / iPod
Default:
XX
TUNER SETTING
LOCAL SEEK
AUTO
MEMORY
MONO SET
NEWS SETON
REGIONALON
AF SETON
TION
PTY
SEARCH
CLOCK
TIME SYNC
ON
: Searches only FM stations with good
reception. ;
OFF
: Cancels.
YES
:Automatically starts memorizing 6
stations with good reception.;
(Selectable only if
[PRESETTYPE]
ON
:Improves the FM reception, but the
stereo effect may be lost.;
: The unit will temporarily switch to News
Programme if available. ;
: Switches to another station only in
the specific region using the “AF” control.;
OFF
:Cancels.
: Automatically searches for another
station broadcasting the same program in
the same Radio Data System network with
better reception when the current reception
is poor.;
:Allows the unit to temporarily switch to
Traffic Information.;
Press the volume knob to enter PTY language
selection. Turn the volume knob to select
the PTY language (
GERMAN
Selects the available Program Type (see the
following), then, press
ON
:Synchronizes the unit’s time to the Radio
Data System station time.;
• If the volume is adjusted during reception of
traffic information, alarm or news bulletin, the
adjusted volume is memorized automatically.
It will be applied the next time traffic
information, alarm or news bulletin function
is turned on.
KDC-100Q
KDC-100Q
: NEWS
SPORT
VARIED
SOCIAL
LEISURE
(music), LIGHT M (music), CLASSICS
OTHER M (music), JAZZ
NATION M (music), OLDIES
:
, AFFAIRS
, INFO (information),
, EDUCATE
, WEATHER
, RELIGION
, DOCUMENT
[SPEECH]
:
is selectable only
is selectable only
[LOCAL SEEK]
, DRAMA
, CULTURE
, FINANCE
, CHILDREN
, PHONE IN
, TRAVEL
, COUNTRY
, FOLK M (music)
or
[MUSIC]
can only
, SCIENCE
,
,
,
,
if
Start playback
/
The source changes automatically and playback
starts.
/
CD
,
USB
USB input terminal
iPod/iPhone
KDC-261UR
USB input terminal
KCA-iP102 (optional accessory)
Press and hold iPod to select the control
mode while in iPod source.
MODE ON:
From the iPod.
MODE OFF:
KDC-361U/ KDC-261UB
(for
)
From the unit.
( 7, *1)
Label side: Eject disc
CA-U1EX (max.: 500mA)
(optional accessory)
/
6
KDC-361U
KDC-261UB
KDC-261UR
To Do this
Pause or resume
Press 6 (or press ENT on RC-406).
playback
Select a track/file
Select a folder
Reverse/
Press / (or press / (+) on RC-406).
2
*
Press / (or press
AM– / #FM+ on RC-406).
*
Press and hold / (or press and hold / (+) on RC-406).
Fast-forward
3
Repeat play
*
Press 4 repeatedly.
• Audio CD: TRACKREPEAT, REPEATOFF
• MP3/WMA/WAV file or iPod: FILEREPEAT, FOLDERREPEAT, REPEATOFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC)
file
( 10)
: FILEREPEAT, REPEATOFF
3
Random play
*
Press 3 or repeatedly.
• Audio CD: DISCRANDOM, RANDOMOFF
• MP3/WMA/WAV file or iPod or KME Light/ KMC file: FOLDERRANDOM,
RANDOMOFF
4
Press and hold 3 or to select “ALLRANDOM”.
1
*
You can still play/pause, file search, fast-forward or reverse files from the unit.
2
*
Only for MP3/WMA/WAV files. This does not work for iPod.
3
*
For iPod: Applicable only when
4
*
For CD: Only for MP3/WMA files.
[MODE OFF]
is selected.
*
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn,
TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.
CD / USB / iPod
Select a track/file from a list
For iPod: Applicable only when
selected.
( 6)
1 Press .
2 Turn the volume knob to make a selection,
then press the knob.
• MP3/WMA/WAV file: Select the desired
folder, then a file.
• iPod or KME Light/ KMC file: Select the
desired file from the list (PLAYLISTS,
ARTISTS, ALBUMS, SONGS, PODCASTS*,
GENRES, COMPOSERS*).
*
Only for iPod.
• To return to the root folder (or first file), press
number button 5.
• To return to the previous setting item or
hierarchy, press
• To cancel, press and hold
If you have many files....
You can search through them quickly (on step 2
above) at a preset skip search ratio by pressing
/ .
• See also “Set the skip search ratio.”
• Pressing and holding / skip songs at
the maximum ratio (10
setting made.
• For USB: Only for files registered in the
database created with KME Light/ KMC.
• Not applicable for audio CD.
[MODE OFF]
.
.
( 8)
%
) regardless of the
ENGLISH |
is
7
AUX
Direct Music Search (using RC-406)
KDC-130Y
(for
)
1 Press DIRECT.
2 Press the number buttons to enter a track/
file number.
3 Press ENT to search for music.
• To cancel, press .
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file.
Select a song by name
While listening to iPod...
1 Press .
2 Turn the volume knob to select a category,
then press the knob.
3 Turn the volume knob quickly to enter
character search.
4 Turn the volume knob to select the
character to be searched for.
5 Press / to move to the entry
position.
You can enter up to 3characters.
6 Press the volume knob to start searching.
7 Turn the volume knob to make a selection,
then press the knob.
Repeat step
selected.
• To search for a character other than A to Z
and 0 to 9, enter only “
• To return to the previous hierarchy, press
• To return to the top menu, press number
button 5.
• To cancel, press and hold
7 until the desired item is
.
”.
*
.
Set the skip search ratio
While listening to iPod or KME Light/ KMC file...
1 Press the volume knob to enter
2 Turn the volume knob to select
press the knob.
3 Turn the volume knob to select
[SKIP SEARCH]
, then press the knob.
4 Turn the volume knob to make a selection,
then press the knob.
0.5%
(default)/ 1%/ 5%/
ratio over the total files.
5 Press and hold to exit.
Change the USB drive
When a smartphone (Mass Storage Class) is
connected to the USB input terminal, you can
select its internal memory or external memory
(such as an SD card) to playback the stored songs.
You can also select the desired drive to playback
when a multiple drives device is connected.
Press number button 5 repeatedly to select
the desired drive.
(or)
1 Press the volume knob to enter
2 Turn the volume knob to select
press the knob.
3 Turn the volume knob to select
[MUSIC DRIVE]
, then press the knob.
4 Press the volume knob to select
[DRIVE CHANGE]
The next drive is selected automatically.
Repeat steps 1 to
drives.
Selectable items:
CD / USB / iPod
[FUNCTION]
[USB]
10%
: Skip search
[FUNCTION]
[USB]
.
4 to select the following
[DRIVE1]
to
[DRIVE5]
, then
, then
Preparation:
Select
Start listening
.
Connect a portable audio player
1
(commercially available).
Auxiliary input jack
3.5mm stereo mini plug with “L”
shaped connector (commercially
available)
2 Press SRC to select AUX.
3 Turn on the portable audio player and
start playback.
Set the AUX name
While listening to a portable audio player
connected to the unit...
1 Press the volume knob to enter
2 Turn the volume knob to select
.
then press the knob.
3 Turn the volume knob to select
SET]
4 Turn the volume knob to make a selection,
then press the knob.
AUX
5 Press and hold to exit.
8
[ON]
for
[BUILT-IN AUX]. ( 5)
, then press the knob.
(default)/
DVD/ PORTABLE/ GAME/ VIDEO/ TV
Portable audio
player
[FUNCTION]
[SYSTEM]
[AUX NAME
.
,
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.