Kenwood KDC-3354UGY, KDC-3254URY, KDC-3054UG, KDC-3054URY, KDC-4054UB User Manual

...

KDC-4554U KDC-4054UB KDC-4054UR KDC-3454UQ KDC-3354UGY KDC-3254URY KDC-3054UG KDC-3054UR KDC-3054URY KDC-316UR

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

РAДИОПРИЕMНИК С KOMПAKT–ДИСKAMИ

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

АВТОМАГНІТОЛА

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

Изделие изготовлено в Индонезии

CONTENTS

Safety 3

Preparation 4

How to attach/detach the faceplate How to reset your unit

Basic operations 5

Getting started 7

Canceling the display demonstration Setting the demonstration mode Adjusting the clock Initial settings before operations

Listening to the radio 8

Adjust [SETTINGS] mode settings

Listening to a disc/ USB device/ iPod 10

Start playing a disc Connecting a USB device Connecting an iPod

Selecting Repeat Play Selecting Random Play Selecting a folder/track/file

Functions of

Selecting a song by alphabet Selecting App & iPod Control Mode Adjust [SETTINGS] mode settings

(for

)

with iPod

Listening to the other external components 13

Using the remote controller (RC-405) 13

Equipped for Basic operations Direct Access Tuning Direct Music Search

Function settings 15

Troubleshooting 17

Installation/connection 19

Basic procedure Warning Caution Wiring connection Installing the unit Removing the unit

Specifications 23

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the

symbol for batteries indicates that this battery contains lead.

Safety

WARNING

Stop the car before operating the unit.

Important to know...

To prevent a short circuit, never put or

leave any metallic objects (such as coins or metal tools) inside the unit.

Caution: Adjust the volume so that you

can hear sounds outside the car. Driving with the volume too high may cause an accident.

Condensation: When the car is air-

conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.

This unit can only play the CDs with:

The illustrations in this manual are

examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.

A USB connection cable, CA-U1EX

(max.: 500 mA) (optional accessory) is required for connecting a USB device.

You can connect an Apple iPod/iPhone

with

The word “iPod” appearing in this manual

indicates the iPod or iPhone connected to this unit with a connection cable, KCA-iP102 (optional accessory).

If you experience problems during

installation, consult your Kenwood dealer.

When you purchase external components,

check with your Kenwood dealer to make sure that they work with your model and in your area.

Detailed information and notes about the

playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohamashi, Kanagawa, 221-0022, Japan

EU Representative’s:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is

no danger of hazardous radiation outside the unit.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir. This product complies with Directive, Number 26891 regarding “REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT”.

ENGLISH

Preparation

How to attach/detach the faceplate

Do not expose the faceplate to direct

sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.

Keep the faceplate in its casing while

detached.

The faceplate is a precision piece of

equipment and can be damaged by shocks or jolts.

To prevent deterioration, do not touch the

terminals of the unit and faceplate with your fingers.

How to reset your unit

If this unit fails to operate properly, press the reset button.

The unit returns to factory settings when the reset button is pressed.

Remote controller (RC-405) is equipped for . (page 13, 14)

Reset button

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit.

Cleaning the connector: The unit may not function properly if the connectors between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector.

Handling discs

Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use any accessories for the disc. Clean from the center of the disc and move outward. Clean the disc with a dry silicon or soft cloth. Do not use any solvents. When removing discs from this unit, pull them out horizontally. Remove the rims from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

Basic operations

Display window

Loading slot Ejects the disc

Volume knob

Detaches the faceplate

The following indicator lights up when...

ST : A stereo broadcast is received (FM). IN : A disc is in the unit. TI : Traffic Information function is turned

on.

RDS : Radio Data System service is available.

For :

EQ : [PRESET EQ] is set to an EQ

mode other than [NATURAL]. (page 15)

B.BOOST : [BASS BOOST] is set to

[B.BOOST LV1], [B.BOOST LV2]

or [B.BOOST LV3]. (page 15)

: In Search Mode or when a

Playlist is displayed.

USB terminal

Auxiliary input jack

The illustration and button names used for explanation in this manual are of

otherwise).

Refer to the table below for the difference:

iPod

3 (ALL RDM) 3

(unless mentioned

Continued...

ENGLISH

When you press or hold the following button(s)...

Button General operation

Turns on. Turns off if pressed and held.

SRC

Volume knob

(turn)

Volume knob

(press)

1 (–) / 2 (+) Selects the previous/next folder.

6 ( ) Pauses/resumes playback of a disc/ USB device/ iPod.

SCRL DISP

iPod

Selects the available sources (TUNER, USB/ iPod, CD, AUX, STANDBY), if the

power is turned on.

• If the source is ready, playback also starts.

• “iPod” or “CD” is selectable only when an iPod is connected or a disc is loaded.

Adjusts the volume level. Selects items.

Confirms selection. Enters [FUNCTION] settings.

Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW when “TUNER” is

selected as the source.

Enters Music Search mode.

Searches for radio station. Selects track/file. Fast-forwards/reverses tracks if pressed and held.

Changes the display information. Scrolls the display information if pressed and held. Enters clock adjustment mode directly (page 7) if pressed and held while

in clock display screen.

For :

Selects “iPod” source. Enters the controlling mode (MODE ON/ MODE OFF) for iPod playback if

pressed and held. (page 12)

For

Selects Random Play. (page 11)

Returns to the previous item. Exit from setting mode if pressed and held.

Getting started

Canceling the display demonstration

The display demonstration is always turned on unless you cancel it.

When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB]

Press the volume knob.

[YES] is selected as the initial setup.

Press the volume knob again to confirm.

[DEMO OFF] appears.

If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in

step 2, [DEMO MODE] appears and the display demonstration starts.

Setting the demonstration mode

Press the volume knob to enter [FUNCTION].

Turn the volume knob to select [DEMO MODE], then press to enter.

Turn the volume knob to select [ON] or [OFF].

If [ON] is selected, display demonstration starts if no operation is done for about

20 seconds.

Hold to finish the procedure.

Adjusting the clock

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [SETTINGS], then press to enter.

Turn the volume knob to select [CLOCK], then press to enter.

Turn the volume knob to select [CLOCK ADJUST] / [CLOCK ADJ], then press to enter.

Clock hour flashes on the display.

Turn the volume knob to adjust the hour, then press to enter minute adjustment.

Clock minutes flashes on the display.

Turn the volume knob to adjust the minute, then press to confirm.

Press 4

Hold to finish the procedure.

¢ to move between the hour and minute adjustment.

ENGLISH

Initial settings before operations

Press SRC to enter [STANDBY] mode.

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [INITIAL SET], then press to enter.

Turn the volume knob to make a selection, then press to confirm.

See table on page 8 for selection.

Hold to finish the procedure.

Continued...

+ 16 hidden pages