Kenwood KDC-320UI User Manual

KDC-220UI
KDC-172Y
KDC-152R

CD-RECEIVER

INSTRUCTION MANUAL

CD-PECBEP

HCTPK O KCATA

CD-

  

B5A-2090-00 (EN/E2N)© 2017 JVC KENWOOD Corporation

KDC-120UR
KDC-120UG
KDC-120UB

i

For Israel

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання
деяких Небезпечних Речовин в електричному та електронному обладнанні
(затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних
Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1. свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на
мільйон;

2. кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

3. ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

4. шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000
частин на мільйон;

5. полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин
на мільйон;

6. полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до
1000 частин на мільйон.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable
for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling
these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and
waste disposal will help conserve resources whilst preventing detrimental effects on our health and the
environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы
(годности) данного товара “по истечении которого он может представлять опасность для жизни,
здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)
лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут
храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов,
упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в
частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с
законом о правах потребителя или других законов, связанных с ним.

Условия хранения:

Температура : от -30°C до +85°C
Влажность : от 0% до 90%

ii

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been
classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные
лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности.
Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні
промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За
межами даного апарату не існує небезпеки лазерного випромінювання.

iii

English

Hereby, JVCKENWOOD declares that the radio equipment
“KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/
KDC-120UB” is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement
radio « KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB » est conforme à la directive
2014/53/UE.
L’intégralité de la déclaration de conformité UE est
disponible à l’adresse Internet suivante :
http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät
“KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/
KDC-120UB” der Richtlinie 2014/53/EU entspricht.
Der volle Text der EU-Konformitätserklärung steht unter
der folgenden Internetadresse zur Verfügung:
http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur
“KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” in overeenstemming is met
Richtlijn 2014/53/EU.
De volledige tekst van de EU-verklaring van
overeenstemming is te vinden op het volgende
internetadres:
http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio
radio “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” è conforme alla Direttiva
2014/53/UE.
Il testo integrale della dichiarazione di conformità UE è
disponibile al seguente indirizzo internet:
http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de
radio “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” cumple la Directiva 2014/53/EU.
El texto completo de la declaración de conformidad con la
UE está disponible en la siguiente dirección de internet:
http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento
de rádio “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” está em conformidade com a
Diretiva 2014/53/UE.
O texto integral da declaração de conformidade da UE está
disponível no seguinte endereço de internet:
http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy
“KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/
KDC-120UB” jest zgodny z dyrektywą 2014/53/UE.
Pełny tekst deklaracji zgodności EU jest dostępny pod
adresem:
http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové
zařízení “KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” splňuje podmínky směrnice
2014/53/EU.
Plný text EU prohlášení o shodě je dostupný na následující
internetové adrese:
http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KDC-220UI/
KDC-172Y/KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB“
rádióberendezés megfelel a 2014/53/EU irányelvnek.
Az EU konformitási nyilatkozat teljes szövege az alábbi
weboldalon érhető el:
http://www.kenwood.com/cs/ce/eudoc/

Declaration of Conformity with regard to the RE Directive 2014/53/EU
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Декларация соответствия относительно Директивы RE 2014/53/EU
Декларация соответствия относительно Директивы RoHS 2011/65/EU

Производитель:

JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, ЯПОНИЯ

Представительство в EC:

JVCKENWOOD Europe B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, НИДЕРЛАНДЫ

Декларація про відповідність вимогам Директиви RE 2014/53/EU
Декларація про відповідність вимогам Директиви RoHS 2011/65/EU

Виробник:

JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Представник у ЕС:

JVCKENWOOD Europe B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

iv

Svenska

Härmed försäkrar JVCKENWOOD att
radioutrustningen “KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB”
är i enlighet med direktiv 2014/53/EU.
Den fullständiga texten av EU-försäkran
om överensstämmelse finns på följande
Internetadress:
http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite
“KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” on direktiivin
2014/53/EU mukainen.
EU-vaatimustenmukaisuusvakuutusvaatimus
löytyy kokonaisuudessaan seuraavasta internet­osoitteesta:
http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema
»KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB« v skladu z Direktivo
2014/53/EU.
Celotno besedilo direktive EU o skladnosti je
dostopno na tem spletnem naslovu:
http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje,
že rádiové zariadenie „KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB“
vyhovuje smernici 2014/53/EÚ.
Celý text EÚ vyhlásenia o zhode nájdete na
nasledovnej internetovej adrese:
http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret
“KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” er i overensstemmelse
med Direktiv 2014/53/EU.
EU-overensstemmelseserklæringens fulde ordlyd
er tilgængelig på følgende internetadresse:
http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι
ο ραδιοεξοπλισμός «KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB»
συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.
Το πλήρες κείμενο της δήλωσης συμμόρφωσης
της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση
στο διαδίκτυο:
http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et
„KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB “ raadiovarustus on
vastavuses direktiiviga 2014/53/EL.
ELi vastavusdeklaratsiooni terviktekst on
kättesaadav järgmisel internetiaadressil:
http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra
„KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” atbilst direktīvas
2014/53/ES prasībām.
Pilns ES atbilstības deklarācijas teksts ir pieejams
šādā tīmekļa adresē:
http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga
„KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB “ atitinka 2014/53/EB
direktyvos reikalavimus.
Visą EB direktyvos atitikties deklaracijos tekstą
galite rasti šiuo internetiniu adresu:
http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir
tar-radju “KDC-220UI/KDC-172Y/KDC-152R/
KDC-120UR/KDC-120UG/KDC-120UB” huwa
konformi mad-Direttiva 2014/53/UE.
It-test kollu tad-dikjarazzjoni ta’ konformità huwa
disponibbli fl-indirizz intranet li ġej:
http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema
“KDC-220UI/KDC-172Y/KDC-152R/KDC-120UR/
KDC-120UG/KDC-120UB” u skladu s Direktivom
2014/53/EU.
Cjeloviti tekst deklaracije Europske unije o
usklađenosti dostupan je na sljedećoj internet
adresi:
http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că
echipamentul radio “KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB”
este în conformitate cu Directiva 2014/53/UE.
Textul integral al declarației de conformitate UE
este disponibil la urmatoarea adresă de internet:
http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че
радиооборудването на “KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB” е
в съответствие с Директива 2014/53/ЕС.
Пълният текст на ЕС декларацията за
съответствие е достъпен на следния интернет
адрес:
http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB”
radyo ekipmanının 2014/53/AB Direktifine uygun
olduğunu bildirir.
AB uyumluluk deklarasyonunun tam metni
aşağıdaki internet adresinde mevcuttur.
http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что
радиооборудование «KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB»
соответствует Директиве 2014/53/EU.
Полный текст декларации соответствия
ЕС доступен по следующему адресу в сети
Интернет:
http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє,
що радіообладнання «KDC-220UI/KDC-172Y/
KDC-152R/KDC-120UR/KDC-120UG/KDC-120UB»
відповідає Директиві 2014/53/EU.
Повний текст декларації про відповідність ЄС
можна знайти в Інтернеті за такою адресою:
http://www.kenwood.com/cs/ce/eudoc/

2

CONTENTS BEFORE USE

IMPORTANT

•

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe

Warning and Caution in this manual.

•

Please keep the manual in a safe and accessible place for future reference.

WARNING

•

Do not operate any function that takes your attention away from safe driving.

•

Do not ingest the battery, Chemical Burn Hazard

The remote control supplied with this product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Caution

Volume setting:

•

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•

Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

•

If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

•

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected

( 15)

. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

Remote control (RC-406):

•

Do not leave the remote control in hot places such as on the dashboard.

•

The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

•

The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

How to read this manual

•

Operations are explained mainly using buttons on the faceplate of .

•

English indications are used for the purpose of explanation. You can select the display language from the

[FUNCTION]

menu.

( 6)

•

[XX]

indicates the selected items.

•

( XX)

indicates references are available on the stated page.

BEFORE USE 2

BASICS 3

GETTING STARTED 4

1 Select the display language

and cancel the demonstration
2 Set the clock and date
3 Set the initial settings

RADIO 6

CD/USB/iPod/ANDROID 8

AUX 10

AUDIO SETTINGS 11

DISPLAY SETTINGS 12

INSTALLATION/
CONNECTION 13

TROUBLESHOOTING 16

REFERENCES 17

Maintenance
More information

SPECIFICATIONS 19

ENGLISH

3

BASICS

To On the faceplate

Turn on the power

Press

.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source

Press

repeatedly.

Change the display information Press DISP repeatedly.

( 18, 19)

Faceplate

How to reset

Attach

Detach

Flashes when the unit enters
searching status.

ENGLISH

Your preset adjustments will
be erased except stored radio
stations.

Volume knob

Detach button

Loading

slot

Display

window

4

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display

shows: “SEL LANGUAGE”

“PRESS” “VOLUME KNOB”

1 Turn the volume knob to select

[ENG]

(English),

[RUS]

(Russian) or

[SPA]

(Spanish), then press the knob.

[ENG]

is selected for the initial setup.

Then, the display shows: “CANCEL DEMO”

“PRESS” “VOLUME

KNOB”.

2 Press the volume knob.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

Set the clock and date

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

To adjust the clock

3 Turn the volume knob to select

[CLOCK ADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the knob.

6 Turn the volume knob to select

[12H]

or

[24H]

, then press the knob.

GETTING STARTED

1

2

BASICS

Remote control (RC-406) (supplied for )

Pull out the insulation sheet when
using for the first time.

Remote sensor
(Do not expose to bright sunlight.)

/ / / / :

Remote control functions are not available.

How to replace the battery

To On the remote control

Turn on the power Press and hold SRC to turn off the power.

( Pressing SRC does not turn on the power. )

Adjust the volume Press

or .

• Press and hold

to continuously increase

the volume to 15.

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Select a source Press SRC repeatedly.

ENGLISH

ENGLISH

5

To set the date

7 Turn the volume knob to select

[DATE FORMAT]

, then press the knob.

8 Turn the volume knob to select

[DD/MM/YY]

or

[MM/DD/YY]

, then press

the knob.

9 Turn the volume knob to select

[DATE SET]

, then press the knob.

10 Turn the volume knob to make the settings, then press the knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press

.

Set the initial settings

1

Press

repeatedly to enter STANDBY.

2 Press the volume knob to enter

[FUNCTION]

.

•

Pressing AUD enters

[AUDIO CONTROL]

directly.

3 Turn the volume knob to select an item (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.

To return to the previous setting item, press

.

Default:

XX

AUDIO CONTROL

SWITCH PREOUT

REAR/SUBWOOFER

or

REAR/SUB-W

: Selects whether rear speakers
or a subwoofer are connected to the line out terminals on the rear
(through an external amplifier).

( 15)

SP SELECT

OFF/5/4/6×9/6/OEM

: Selects according to the speaker size (5inches
or 4inches, 6×9inches or 6inches) or OEM speakers for optimum
performance.

3

GETTING STARTED

DISPLAY

EASY MENU

(For / )
When entering

[FUNCTION]

...

ON

:ZONE 1 illumination changes to white color.;

OFF

:ZONE 1 illumination remains as

[COLOR SELECT]

color.

( 13)

•

ZONE 2 illumination changes to light blue color when you enter

[FUNCTION]

, irregardless of the

[EASY MENU]

setting.

•

Refer to the illustration on page 12 for zone identification.

TUNER SETTING

PRESET TYPE

NORMAL

:Memorizes one station for each preset button in each band

(FM1/FM2/FM3/MW/LW).;

MIX

:Memorizes one station for each preset

button, regardless of the selected band.

SYSTEM

KEY BEEP

ON

:Activates the keypress tone.;

OFF

:Deactivates.

SOURCE SELECT

BUILT-IN AUX

ON

:Enables AUX in source selection.;

OFF

:Disables.

( 10)

P-OFF WAIT

Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.

20M

: 20 minutes ;

40M

: 40 minutes ;

60M

: 60 minutes ;

WAIT TIME – – –

or

OFF – – –

:Cancels

CD READ 1

:Automatically distinguishes between audio file disc and music CD.;

2

:Forces to play as a music CD. No sound can be heard if an audio file disc

is played.

6

GETTING STARTED

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading
is not activated).
For details on how to update the firmware, see
<www.kenwood.com/cs/ce/>.

CLOCK

CLOCK DISPLAY

ON

:The clock time is shown on the display even when the

unit is turned off.;

OFF

:Cancels.

ENGLISH

Select the display language for

[FUNCTION]

menu and music
information if applicable.
By default,

[ENGLISH]

is selected.

РУССКИЙ

ESPANOL

Search for a station

1

Press

repeatedly to select RADIO.

2 Press repeatedly (or press / on the remote control) to

select FM1/FM2/FM3/MW/LW.

3 Press S/T (or press S/ on the remote control) to search for a

station.

• To change the searching method for S/T: Press

repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6) (or press one

of the number buttons (1 to 6) on the remote control).

Direct Access Tuning

(using the remote control) (for )

1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.

• To cancel, press

or DIRECT.

• If no operation is done for 10seconds after step

2, Direct Access Tuning is

automatically canceled.

RADIO

ENGLISH

ENGLISH

7

PTY SEARCH1 Turn the volume knob to select the available Program Type. (See the

following.)

2

Turn the volume knob to select the PTY language (

ENGLISH/FRENCH

/

GERMAN

), then press the knob.

3

Press

S/T

to start searching.

CLOCK

TIME SYNC

ON

:Synchronizes the unit’s time to the Radio Data System station time.;

OFF

:Cancels.

Available Program Type for

[PTY SEARCH]

SPEECH

:

NEWS, AFFAIRS, INFO

(information),

SPORT, EDUCATE, DRAMA

,

CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL

,

RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC

:

POP M

(music),

ROCK M

(music),

EASY M

(music),

LIGHT M

(music),

CLASSICS, OTHER M

(music),

JAZZ, COUNTRY, NATION M

(music),

OLDIES, FOLK M

(music)

The unit will search for the Program Type categorized under

[SPEECH]

or

[MUSIC]

if selected.

•

[LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH]

is

selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news
bulletin, the adjusted volume is memorized automatically. It will be
applied the next time traffic information or news bulletin is turned on.

RADIO

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

.

Default:

XX

TUNER SETTING

LOCAL SEEK

ON

: Searches only stations with good reception. ;

OFF

: Cancels.

•

Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

AUTO
MEMORY

YES

:Automatically starts memorizing 6 stations with good reception.;

NO

:Cancels.

•

Selectable only if

[NORMAL]

is selected for

[PRESET TYPE]. ( 5)

MONO SET

ON

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

NEWS SET ON

: The unit will temporarily switch to News Programme if available. ;

OFF

:Cancels.

REGIONAL ON

: Switches to another station only in the specific region using the “AF”

control.;

OFF

:Cancels.

AF SET ON

: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;

OFF

:Cancels.

TI ON

:Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up).;

OFF

:Cancels.

8

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

CD

To On the faceplate On the remote control

Playback/pause Press . Press .

Reverse/Fast-forward

*

4

Press and hold S/T. Press and hold S/

.

Select a track/file

Press S/T. Press S/

.

Select a folder

*

5

Press

/ . Press / .

Repeat play

*

6

Press

repeatedly.

TRACK REPEAT/ALL REPEAT

: Audio CD

FILE REPEAT/FOLDER REPEAT/ALL REPEAT

: MP3/WMA/WAV/FLAC file

FILE REPEAT/FOLDER REPEAT/REPEAT OFF

: iPod or ANDROID

Random play

*

6

Press

repeatedly.

DISC RANDOM/RANDOM OFF

: Audio CD

FOLDER RANDOM/RANDOM OFF

: MP3/WMA/WAV/FLAC file, iPod or

ANDROID

Press and hold

to select

ALL RANDOM

.

*

7

*

3

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the
instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on
your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

*

4

For ANDROID: Applicable only when

[BROWSE MODE]

is selected.

( 9)

*

5

For CD: Only for MP3/WMA files. This does not work for iPod/ANDROID.

*

6

For iPod/ANDROID: Applicable only when

[MODE OFF]/[BROWSE MODE]

is selected.

( 9)

*

7

For CD: Only for MP3/WMA files.

Selectable source:

: CD/USB/iPod/

ANDROID

Other models : CD/USB/ANDROID

ENGLISH

Label side

M

Eject disc

USB input terminal

CA-U1EX (max.: 500mA)
(optional accessory)

USB cable

*

2

(commercially available)

KCA-iP102/KCA-iP103
(optional accessory)

*

1

or accessory of the iPod/
iPhone

*

2

USB

iPod/iPhone

ANDROID

*

3

*

1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*

2

Do not leave the cable inside the car when not using.

ENGLISH

9

CD/USB/iPod/ANDROID

Select control mode

While in iPod source, press 5 repeatedly.

MODE ON

: Control iPod using the iPod itself. However, you can still play/

pause, file skip, fast-forward or reverse from this unit.

MODE OFF

: Control iPod from this unit.

While in ANDROID source, press 5 repeatedly.

BROWSE MODE

: Control Android device from this unit via KENWOOD

MUSIC PLAY application installed in the Android device.

HAND MODE

: Control Android device using the Android device itself via

other media player applications installed in the Android
device. However, you can still play/pause and file skip from
this unit.

Select music drive

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage
Class).

• Selected drive of a multiple drives device.

Select a file from a folder/list

For iPod/ANDROID, applicable only when

[MODE OFF]/[BROWSE MODE]

is

selected.

1 Press .
2 Turn the volume knob to select a folder/list, then press the knob.
3 Turn the volume knob to select a file, then press the knob.

Quick Search

(applicable only for CD, USB and ANDROID source)

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip Search

(applicable only for iPod and ANDROID source)

Press S/T to search at a preset skip search ratio.

( 10, [SKIP SEARCH])

• Pressing and holding S/T searches at a 10% ratio.

Alphabet search

(applicable only for iPod and ANDROID source)

You can search for a file according to the first character.

For iPod source

1 Turn the volume knob quickly to enter character search.
2 Turn the volume knob to select the character.

• Select “

*

” to search for a character other than AtoZ, 0to9.

3 Press S/T to move to the entry position.

• You can enter up to 3characters.
4 Press the volume knob to start searching.

For ANDROID source

1 Press

/ to enter character search.

2 Turn the volume knob to select the character.

^A^: Upper case letters (A to Z)
_A_: Lower case letters (a to z)

-0-: Numbers (0 to 9)

***

: Character other than AtoZ, 0to9

3 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5.

• To return to the previous setting item, press

.

• To cancel, press and hold

.

10

CD/USB/iPod/ANDROID

Direct Music Search

(using the remote control) (for )

1 Press DIRECT.
2 Press the number buttons to enter a track/file number.
3 Press to search for music.

• To cancel, press

or DIRECT.

• Not available if Random Play is selected.

• Not applicable for iPod and ANDROID source.

Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo

(for )

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the
iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.

To return to the previous setting item, press

.

Default:

XX

USB

MUSIC DRIVE DRIVE CHANGE

:The next drive (

[DRIVE 1]

to

[DRIVE 5]

) is selected
automatically and playback starts.
Repeat steps

1

to 3 to select the following drives.

SKIP SEARCH 0.5%/1%/5%/10%

: While listening to iPod or ANDROID source, selects

the skip search ratio over the total files.

Preparation:

Select

[ON]

for

[BUILT-IN AUX]

in

[SOURCE SELECT]. ( 5)

Start listening

1

Connect a portable audio player (commercially available).

2 Press repeatedly to select AUX.
3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[SYSTEM]

, then press the knob.

3 Turn the volume knob to select

[AUX NAME SET]

, then press the knob.

4 Turn the volume knob to select an item, then press the knob.

AUX

(default)/

DVD/PORTABLE/GAME/VIDEO/TV

5 Press and hold to exit.

To return to the previous setting item, press

.

AUX

Auxiliary input jack

Portable audio player

3.5mm stereo mini plug with “L” shaped connector
(commercially available)

ENGLISH

ENGLISH

11

While listening to any source...

1 Press AUD to enter

[AUDIO CONTROL]

directly.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.

To return to the previous setting item, press

.

(or using the remote control) (for )

1 Press AUD to enter

[AUDIO CONTROL]

.

2 Press J / K to select an item, then press .

Default:

XX

AUDIO CONTROL

SUB-W LEVEL

–15

to

+15 (0

) Adjusts the subwoofer output level.

BASS LEVEL –8

to +8 (+2)

Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you
want to adjust.)

MID LEVEL –8

to +8 (+1)

TRE LEVEL –8

to +8 (+1)

EQ PRO

(This setting is stored to

[USER]

.)

BASS ADJUST BASS CTR FRQ 60HZ/80HZ/100HZ/200HZ

or 60/80/

100/200

:

Selects the center frequency.

BASS LEVEL –8

to +8 (+2):Adjusts the level.

BASS Q FACTOR 1.00/1.25/1.50/2.00

:Adjusts the quality factor.

BASS EXTEND ON

:Turns on the extended bass.;

OFF

:Cancels.

AUDIO SETTINGS

MID ADJUST MID CTR FRQ 0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ

:Selects the

center frequency.

MID LEVEL –8

to +8 (+1):Adjusts the level.

MID Q FACTOR 0.75/1.00/1.25

:Adjusts the quality factor.

TRE ADJUST TRE CTR FRQ 10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ

:Selects

the center frequency.

TRE LEVEL –8

to +8 (+1):Adjusts the level.

PRESET EQ DRIVE EQ/TOP40/POWERFUL/ROCK/POPS/EASY/JAZZ/NATURAL

/

USER

:Selects a preset equalizer suitable to the music genre.

(Select

[USER]

to use the settings made in

[EQ PRO]

.)

[DRIVE EQ]

is a preset equalizer that reduces noise outside the car or

running noise of the tyres.

BASS BOOST LEVEL1/LEVEL2/LEVEL3

or

LV1/LV2/LV3

:Selects your preferred bass

boost level.;

OFF

:Cancels.

LOUDNESS LEVEL1/LEVEL2

or

LV1/LV2

:Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level.;

OFF

:Cancels.

SUBWOOFER SET ON

:Turns on the subwoofer output.;

OFF

:Cancels.

LPF SUBWOOFER THROUGH

:All signals are sent to the subwoofer.;

85HZ/120HZ/160HZ

:Audio signals with frequencies lower than

85Hz/120Hz/160Hz are sent to the subwoofer.

SUB-W PHASE REVERSE

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than

[THROUGH]

is selected for

[LPF SUBWOOFER]

.)

FADER R15

to

F15 (0

):Adjusts the rear and front speaker output balance.

BALANCE L15

to

R15 (0

):Adjusts the left and right speaker output balance.

12

AUDIO SETTINGS

Set the dimmer

Press and hold DISP to turn on or off the dimmer.

• If you have set

[DIMMER TIME] ( 13)

, it will be canceled once you press

and hold this button.

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item

( 13)

, then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

.

DISPLAY SETTINGS

VOLUME OFFSET

For AUX:

–8

to +8(0) ; For other sources: –8 to 0:Preset the initial
volume level of each source. (Before adjustment, select the source
you want to adjust.)

SOUND RECNSTR

(Sound reconstruction)

ON

:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are
lost in audio data compression.;

OFF

:Cancels.

•

[SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE]

is

selectable only if

[SWITCH PREOUT]

is set to

[SUBWOOFER]

or

[SUB-W]. ( 5)

•

[SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE]

is selectable only if

[SUBWOOFER SET]

is set to

[ON]. ( 11)

Zone identification for color and brightness settings

Zone identification for brightness settings

ENGLISH

ENGLISH

13

DISPLAY SETTINGS

Default:

XX

DISPLAY

COLOR SELECT

(For / )
Select color for

ALL ZONE, ZONE 1

and

ZONE 2

separately.

1

Select a zone. (See the illustration on page 12.)

2

Select a color for the selected zone.

INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B

/preset colors*

To make your own color, select

[CUSTOM R/G/B]

. The color you have

made will be stored in

[CUSTOM R/G/B]

.

1

Press the volume knob to enter the detailed color adjustment.

2

Press S/T to select the color (R/G/B) to adjust.

3 Turn the volume knob to adjust the level (0 to 9), then press the knob.

DIMMER

Dim the illumination.

ON

:Dimmer is turned on.;

OFF

:Cancels.

DIMMER TIME

:Set the dimmer on and off time.

1

Turn the volume knob to adjust the

[ON]

time, then press the knob.

2

Turn the volume knob to adjust the

[OFF]

time, then press the knob.

(Default:

[ON]: 18:00; [OFF]: 6:00

)

BRIGHTNESS

1

Select a zone. (See the illustration on page 12.)

2 0

to 31: Select your preferred brightness level for the selected zone.

TEXT SCROLL AUTO/ONCE

:Select whether to scroll the display information

automatically, or scroll only once.;

OFF

:Cancels.

*

Preset colors:

RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1

/

BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1

/

GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2

/

ORANGERED

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire

(black) to prevent a short circuit.

•

To prevent a short circuit:
– Insulate unconnected wires with vinyl tape.
– Be sure to ground this unit to the car’s chassis again after installation.
– Secure the wires with cable clamps and wrap vinyl tape around the wires that come into

contact with metal parts to protect the wires.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during

and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground wire (black), or connect

them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)

to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned
on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are

working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old

fuse with one that has the same rating.

INSTALLATION/CONNECTION

14

Basic procedure

1

Remove the key from the ignition switch, then disconnect the

[

terminal of the car battery.

2

Connect the wires properly.

See Wiring connection.

( 15)

3

Install the unit to your car.

See Installing the unit (in-dash mounting).

4

Connect the [ terminal of the car battery.

5

Detach the faceplate and reset the unit.

( 3)

Do the required wiring.

( 15)

Dashboard of
your car

Bend the appropriate tabs to hold the
mounting sleeve firmly in place.

How to remove the unit

1

Detach the faceplate.

2

Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.

3

Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the

illustration.

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim plate as
illustrated before fitting.

INSTALLATION/CONNECTION

Part list for installation

(A)

Faceplate

(C)

Mounting sleeve

(B)

Trim plate

(D)

Wiring harness

(E)

Extraction key

ENGLISH

ENGLISH

15

REMOTE CONT

STEERING WHEEL

REMOTE INPUT

P. CONT

ANT CONT

MUTE

Wiring connection

When connecting to an external amplifier, connect
its ground wire to the car’s chassis to avoid damaging
the unit.

If your car does not have an ISO terminal:

We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult
your car audio dealer.

Pin

Color and function
A4 Yellow : Battery
A5 Blue/White*

1

: Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1

Purple

]

: Rear speaker (right)
B2

Purple/black

[

B3

Gray

]

: Front speaker (right)
B4

Gray/black

[

B5

White

]

: Front speaker (left)
B6

White/black

[

B7

Green

]

: Rear speaker (left)
B8

Green/black

[

Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring
harness as illustrated below.

UnitVehicle

A7 (Red) Ignition wire (Red)

A4 (Yellow)

Default wiring

Battery wire (Yellow)

Light blue/yellow

(Steering remote
control wire)

To the steering wheel remote control adapter

Blue/White*

2

(Power control wire/
Antenna control wire)

Brown

(Mute control wire)

To the power control terminal when using the
optional power amplifier or to the antenna control
terminal in the vehicle

To the terminal that is grounded when the telephone
rings or during conversation

( 17)

(To connect the Kenwood navigation system, refer
your navigations manual.)

Yellow (A4)

Red (Ignition wire)

Red (A7)

Yellow (Battery wire)

ISO
connectors

If no connections are made, do not let the wire come out from the tab.

Fuse (10A)

Antenna terminal

Output terminals

INSTALLATION/CONNECTION

NOTE: Total output for Blue/White wire (*

1

) + (*2) is 12V 350mA

16

TROUBLESHOOTING

Symptom Remedy

General

Sound cannot be heard.

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

“MISWIRING CHECK WIRING
THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.

“PROTECTING SEND SERVICE”
appears.

Send the unit to the nearest service center.

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

Clean the connectors.

( 17)

The unit does not work at all. Reset the unit.

( 3)

Radio

•

Radio reception is poor.

•

Static noise while listening

to the radio.

Connect the antenna firmly.

CD/USB/iPod

Disc cannot be ejected.

Press and hold

M

to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit.

( 3)

Noise is generated. Skip to another track or change the disc.

Tracks do not play back as
you intended them to play.

Playback order is determined when files are recorded.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not
correct.

This is caused by how the tracks are recorded.

Correct characters are not
displayed (e.g. album name).

•

This unit can only display uppercase letters,

numbers, and a limited number of symbols.

•

Depending on the display language you have

selected

( 6)

, some characters may not be

displayed correctly.

Symptom Remedy

CD/USB/iPod

“NA FILE” Make sure the disc contains supported audio files.

( 18)

“NO DISC” Insert a playable disc into the loading slot.

“TOC ERROR” Make sure the disc is clean and inserted properly.

“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult

your nearest service center.

“NO DEVICE” Connect a USB device, and change the source to USB again.

“COPY PRO” A copy-protected file is played.

“NA DEVICE” Connect a supported USB device, and check the

connections.

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

•

Reconnect the iPod.

•

Reset the iPod.

ANDROID

•

Sound cannot

be heard during
playback.

•

Sound output only

from the Android
device.

•

Reconnect the Android device.

•

If in

[HAND MODE]

, launch any media player application

on the Android device and start playback.

•

If in

[HAND MODE]

, relaunch the current media player

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit.

( 18)

Cannot playback at

[BROWSE MODE]

.

•

Make sure KENWOOD MUSIC PLAY APP is installed on the

Android device.

( 8)

•

Reconnect the Android device and select the appropriate

control mode.

•

If this does not solve the problem, the connected Android

device does not support

[BROWSE MODE]. ( 18)

ENGLISH

ENGLISH

17

TROUBLESHOOTING

Symptom Remedy

ANDROID

“NO DEVICE” or
“READING” keeps
flashing.

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected Android

device does not support

[BROWSE MODE]. ( 18)

Playback is intermittent
or sound skips.

Turn off the power saving mode on the Android device.

“ANDROID ERROR”/
“NADEVICE”

•

Reconnect the Android device.

•

Restart the Android device.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory.

( 15)

When a call comes in, “CALL” appears.

(The audio system pauses.)

•

To continue listening to the audio system during a call, press . “CALL” disappears

and the audio system resumes.

When the call ends, “CALL” disappears.

(The audio system resumes.)

REFERENCES

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector
gently with a cotton swab, being careful not to
damage the connector.

Handling discs

•

Do not touch the recording surface of the disc.

•

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•

Do not use any accessories for the disc.

•

Clean from the center of the disc and move outward.

•

Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•

When removing discs from this unit, pull them out horizontally.

•

Remove burrs from the center hole and disc edge before inserting a disc.

More information

For: – Latest firmware updates and latest compatible item list

– Any other latest information

Visit <www.kenwood.com/cs/ce/>.

General

•

This unit can only play the following CDs:

•

For detailed information and notes about the playable audio files, visit

<www.kenwood.com/cs/ce/audiofile/>.

Connector (on the reverse
side of the faceplate)