Kenwood KDC-3057UR, KDC-4557U, KDC-4057UR, KDC-3457UQ, KDC-3057URY User Manual

...

KDC-4557U

KDC-3357UY

KDC-3057URY KDC-4057UB KDC-4057UR KDC-3457UQ

CD-RECEIVER

INSTRUCTION MANUAL

CD-РЕСІВЕР

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

KDC-3257URY KDC-3057UG KDC-3057UR

KDC-317UR

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery

contains lead.

Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative’s:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1. свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

2. кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

3. ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

4. шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

5. полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

6. полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (ayrı atık toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

RADIO 5

CD / USB / iPod 6

AUX 7

AUDIO SETTINGS 8

DISPLAY SETTINGS 9

MORE INFORMATION 9

TROUBLESHOOTING 10

SPECIFICATIONS 11

INSTALLATION / CONNECTION 12

How to read this manual

• Operations explained mainly using buttons on the faceplate.

•

[XX]

indicates the selected items.

• (➜

XX)

indicates references are available on

the stated page number.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accident.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the USB device or iPod/iPhone if it might hinder driving safety.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

•

If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicon or soft cloth. Cleaning the connector: Detach the faceplate and clean the connector with a

cotton swab gently, being careful not to damage the connector.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

BASICS

Faceplate

Volume knob

(turn/press) Loading slot

Attach

Detach

Detach button

To Do this (on the faceplate) Do this (on the remote control)

Turn on the power Press L SRC.

• Press and hold to turn off the power.

KDC-4557U KDC-4057UB KDC-4057UR

KDC-3457UQ KDC-3357UY KDC-3257URY KDC-3057UG KDC-3057UR KDC-317UR

KDC-3057URY

How to reset

Your preset adjustments will also be erased.

Remote control (RC-406)

(supplied for

* Not used.

How to replace the battery

Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. )

KDC-3357UY

)

Remote sensor (Do not expose to bright sunlight.)

Pull out the insulation sheet when using for the first time.

Adjust the volume Turn the volume knob. Press VOL

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Select a source Press L SRC repeatedly. Press SRC repeatedly.

Change the display information

Press SCRL DISP repeatedly.

• Press and hold to scroll the current display information.

( not available )

or VOL .

ENGLISH |

GETTING STARTED

Cancel the demonstration

When you turn on the power (or after you reset the unit), the display

shows: “CANCEL DEMO” \ “PRESS” \ “VOLUME KNOB”

1 Press the volume knob.

[YES]

is selected for the initial setup.

2 Press the volume knob again. “DEMO OFF” appears.

Set the clock

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Press the volume knob to select 5 Turn the volume knob to adjust the hour, then press the knob. 6 Turn the volume knob to adjust the minute, then press the knob. Press 4

¢ to move between the hour and minute adjustment.

7 Press and hold to exit. (or) Press and hold SCRL DISP to enter clock adjustment mode directly

while in clock display screen.

Then, perform steps 5 and 6 above to set the clock.

[FUNCTION] [SETTINGS] [CLOCK]

[CLOCK ADJ]

, then press the knob.

Set the initial settings

1 Press SRC to enter 2 Press the volume knob to enter 3 Turn the volume knob to select

[STANDBY]

[FUNCTION] [INITIAL SET]

, then press the knob.

4 Turn the volume knob to make a selection (see the table below), then press

the knob.

5 Press and hold to exit.

• To return to the previous hierarchy, press .

PRESET TYPE NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/

KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.

RUSSIAN SET

P-OFF WAIT Applicable only when the demonstration mode is turned off.

BUILTIN AUX

CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play

SWITCH PRE REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the

SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or

F/W UPDATE

F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).

MW/ LW). ; MIX: Memorizes one station for each preset button regardless of the selected band.

ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ; OFF: Cancels.

Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.

––– : Cancels ; 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

ON: Enables AUX in source selection. ; OFF: Disables. (➜ 7)

as a music CD. No sound can be heard if an audio file disc is played.

line out terminals on the rear (through an external amplifier).

4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

Default:

RADIO

Search for a station

1 Press L SRC to select TUNER. 2 Press repeatedly (or press

FM2/ FM3/ MW/ LW.

3 Press 4 / ¢ to search for a station.

• To store a station: Press and hold one of the number buttons (1 to 6).

• To select a stored station: Press one of the number buttons (1 to 6)

Direct Access Tuning (using RC-406) (for

1 Press

AM– / #FM+ to select a band.

2 Press DIRECT to enter Direct Access Tuning. “– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display. 3 Press the number buttons to enter a frequency. 4 Press 4 / ¢ (+) to search for a frequency.

• To cancel, press .

• If no operation is done for 10 seconds after step 3, Direct Access Tuning is

automatically canceled.

Other settings

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to make a selection (see the table on the right),

then press the knob.

4 Press and hold to exit.

AM– / #FM+ on RC-406) to select FM1/

)

[FUNCTION] [SETTINGS]

KDC-3357UY

, then press the knob.

Default:

LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels. SEEK MODE

AUTO MEMORY

MONO SET PTY SEARCH

TI NEWS SET AF SET

REGIONAL

ATP SEEK

CLOCK

TIME SYNC

TUNER SET: Selectable only when the source is not TUNER.

TI/ NEWS SET/ AF SET/ REGIONAL/ ATP SEEK: (For details, refer to the table above.)

•

[LOCAL SEEK]/ [MONO SET]/ [PTY SEARCH]/ [TI]/ [NEWS SET]/ [AF SET]/ [REGIONAL]/ [ATP SEEK]

• Available Program Type:

SPEECH: NEWS, AFFAIRS, INFO

MUSIC: POP M

The unit will search for the Program Type categorized under

selected.

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin function is turned on.

Selects the tuning method for the

AUTO1: Automatically searches for a station. ; AUTO2: Searches for a preset station. ; MANUAL: Manually search for a station.

YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels. (Selectable only if [NORM] is selected for [PRESET TYPE].) (

ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob.

Selects the available Program Type (see below), then, press

ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels. 00M – 90M: Sets the time for receiving the next news bulletin. ; OFF: Cancels. ON: Automatically searches for another station broadcasting the same program in the

same Radio Data System network with better reception when the current reception is poor. ; OFF: Cancels.

ON: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.

ON: Automatically searches for a station with better reception when the traffic information’s reception is poor. ; OFF: Cancels.

ON: Synchronizes the unit’s time to the Radio Data System station time. ; OFF: Cancels.

is selectable only when the source is FM.

ROCK M

(information),

(music),

VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

(music),

JAZZ, COUNTRY, NATION M

/ ¢ buttons.

➜

4 / ¢

SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,

EASY M

(music),

LIGHT M

OLDIES, FOLK M

[SPEECH]

(music),

(music)

to start.

CLASSICS, OTHER

[MUSIC]

ENGLISH |

CD / USB / iPod

Start playback

The source changes to CD and playback starts.

USB

USB input terminal

The source changes to USB and playback starts.

iPod/iPhone (for

KDC-4057UB

USB input terminal

The source changes to iPod and playback starts.

Press and hold iPod to select the control mode while in iPod source.

MODE ON: MODE OFF:

*1 You can still control play/pause, file

selection, fast-forward or reverse files from the unit.

Label side

CA-U1EX (max.: 500 mA) (optional accessory)

KDC-4557U

KDC-4057UR

KCA-iP102 (optional accessory)

From the iPod

From the unit.

: Eject disc

)

KDC-4557U KDC-4057UB KDC-4057UR

: Applicable

— : Not applicable

To Do this CD USB iPod

Pause or resume

Press 6 38 (or ENT 38 on RC-406).

playback

Select a track/file Press 4 / ¢ (or 4 / ¢ (+) on RC-406).

Select a folder

Press 1 – / 2 + (or

AM– / #FM+ on RC-406).

—

Reverse/Fast-forward Press and hold 4 / ¢ (or 4 / ¢ (+) on RC-406).

Select a track/file from a list

1 Press . 2 Turn the volume knob to make a selection, then press the knob.

• AAC/MP3/WMA file: Select the desired folder, then a file.

• iPod or KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file ARTISTS, ALBUMS, SONGS, PODCASTS

: Select the desired file from the list (PLAYLISTS,

, GENRES, COMPOSERS

• To return to the root folder (or first file), press number button 5.

• To return to the previous hierarchy, press .

• To cancel, press and hold .

*4*

• To skip songs at a specific ratio, press 4 / ¢. (➜

Repeat play Press 4

repeatedly.

—

• Audio CD: TRAC REPEAT, REPEAT OFF

• AAC/MP3/WMA file: FILE REPEAT, FOLD REPEAT, REPEAT OFF

• iPod or KME Light/ KMC file: FILE REPEAT, REPEAT OFF

Random play Press 3

repeatedly.

• Audio CD: DISC RANDOM, RANDOM OFF

• AAC/MP3/WMA/iPod or KME Light/ KMC file: FOLD RANDOM, RANDOM OFF

Only for AAC/MP3/WMA files.

Applicable only when

[MODE OFF]

Press and hold 3

is selected.

to select “ALL RANDOM.”

Only for files registered in the database created with KME Light/

KMC. (➜

Only for iPod.

Direct Music Search (using RC-406)

(for

KDC-3357UY

)

1 Press DIRECT. 2 Press the number buttons to enter a track/file

number.

3 Press 4 / ¢ (+) to search for music.

• To cancel, press

• Not available if Random Play is selected.

• Not applicable for iPod, KME Light/ KMC file. (➜

Select a song by name

(for

KDC-4557U/ KDC-4057UB

While listening to iPod...

KDC-4057UR

)

1 Press . 2 Turn the volume knob to select a category, then

press the knob.

3 Press again. 4 Turn the volume knob to select the character to

be searched for.

5 Press 4 / ¢ to move to the entry position. You can enter up to three characters. 6 Press the volume knob to start searching. 7 Turn the volume knob to make a selection, then

press the knob.

Repeat step 7 until the desired item is selected.

• To search for a character other than A to Z and 0 to 9, enter only “ * ”.

• To return to the previous hierarchy, press .

• To return to the top menu, press number button 5.

• To cancel, press and hold .

CD / USB / iPod

Set the skip ratio

While listening to iPod (for

KDC-4057UB

file...

KDC-4057UR

KDC-4557U

) or KME Light/ KMC

1 Press the volume knob to enter 2 Turn the volume knob to select

press the knob.

3 Turn the volume knob to select

then press the knob.

4 Turn the volume knob to make a selection, then

press the knob.

0.5%

(default)/ 1%/ 5%/

when searching for a song.

10%

: Sets the skip ratio

(Holding 4 / ¢ skips songs at 10% regardless

of the setting made.)

5 Press and hold to exit.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. (➜

When a call comes in, “CALL” appears.

• The audio system pauses.

• To continue listening to the audio system during a call, press system resumes.

When the call ends, “CALL” disappears.

• The audio system resumes.

SRC. “CALL” disappears and the audio

[FUNCTION] [SETTINGS]

[SKIP SEARCH]

13)

, then

AUX

Preparation:

Select

[ON]

for

[BUILTIN AUX]

Start listening

1 Connect a portable audio player (commercially

available).

Auxiliary input jack

3.5 mm stereo mini plug with “L” shaped connector (commercially available)

2 Press SRC to select AUX. 3 Turn on the portable audio player and start

playback.

Set the AUX name

While listening to AUX... 1 Press the volume knob to enter 2 Turn the volume knob to select

press the knob.

3 Turn the volume knob to select

press the knob.

4 Turn the volume knob to make a selection, then

press the knob.

AUX

(default)/

DVD/ PORTABLE/ GAME/ VIDEO/ TV

5 Press and hold to exit.

. (➜ 4)

Portable audio player

[FUNCTION] [SETTINGS]

[AUX NAME]

, then

ENGLISH |

+ 19 hidden pages