Kenwood KDC-3054UR, KDC-3054UG, KDC-3254URY, KDC-4054UR, KDC-316UR User Manual

...

KDC-4554U KDC-4054UB KDC-4054UR KDC-3454UQ KDC-3354UGY KDC-3254URY KDC-3054UG KDC-3054UR KDC-3054URY KDC-316UR

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

CONTENTS

Safety 3

Preparation 4

How to attach/detach the faceplate How to reset your unit

Basic operations 5

Getting started 7

Canceling the display demonstration Setting the demonstration mode Adjusting the clock Initial settings before operations

Listening to the radio 8

Adjust [SETTINGS] mode settings

Listening to a disc/ USB device/ iPod 10

Start playing a disc Connecting a USB device Connecting an iPod

Selecting Repeat Play Selecting Random Play Selecting a folder/track/file

Functions of

Selecting a song by alphabet Selecting App & iPod Control Mode Adjust [SETTINGS] mode settings

(for

)

with iPod

Listening to the other external components 13

Using the remote controller (RC-405) 13

Equipped for Basic operations Direct Access Tuning Direct Music Search

Function settings 15

Troubleshooting 17

Installation/connection 19

Basic procedure Warning Caution Wiring connection Installing the unit Removing the unit

Specifications 23

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the

symbol for batteries indicates that this battery contains lead.

Safety

WARNING

Stop the car before operating the unit.

Important to know...

To prevent a short circuit, never put or

leave any metallic objects (such as coins or metal tools) inside the unit.

Caution: Adjust the volume so that you

can hear sounds outside the car. Driving with the volume too high may cause an accident.

Condensation: When the car is air-

conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.

This unit can only play the CDs with:

The illustrations in this manual are

examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.

A USB connection cable, CA-U1EX

(max.: 500 mA) (optional accessory) is required for connecting a USB device.

You can connect an Apple iPod/iPhone

with

The word “iPod” appearing in this manual

indicates the iPod or iPhone connected to this unit with a connection cable, KCA-iP102 (optional accessory).

If you experience problems during

installation, consult your Kenwood dealer.

When you purchase external components,

check with your Kenwood dealer to make sure that they work with your model and in your area.

Detailed information and notes about the

playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohamashi, Kanagawa, 221-0022, Japan

EU Representative’s:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is

no danger of hazardous radiation outside the unit.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir. This product complies with Directive, Number 26891 regarding “REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT”.

ENGLISH

Preparation

How to attach/detach the faceplate

Do not expose the faceplate to direct

sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.

Keep the faceplate in its casing while

detached.

The faceplate is a precision piece of

equipment and can be damaged by shocks or jolts.

To prevent deterioration, do not touch the

terminals of the unit and faceplate with your fingers.

How to reset your unit

If this unit fails to operate properly, press the reset button.

The unit returns to factory settings when the reset button is pressed.

Remote controller (RC-405) is equipped for . (page 13, 14)

Reset button

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit.

Cleaning the connector: The unit may not function properly if the connectors between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector.

Handling discs

Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use any accessories for the disc. Clean from the center of the disc and move outward. Clean the disc with a dry silicon or soft cloth. Do not use any solvents. When removing discs from this unit, pull them out horizontally. Remove the rims from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

Basic operations

Display window

Loading slot Ejects the disc

Volume knob

Detaches the faceplate

The following indicator lights up when...

ST : A stereo broadcast is received (FM). IN : A disc is in the unit. TI : Traffic Information function is turned

on.

RDS : Radio Data System service is available.

For :

EQ : [PRESET EQ] is set to an EQ

mode other than [NATURAL]. (page 15)

B.BOOST : [BASS BOOST] is set to

[B.BOOST LV1], [B.BOOST LV2]

or [B.BOOST LV3]. (page 15)

: In Search Mode or when a

Playlist is displayed.

USB terminal

Auxiliary input jack

The illustration and button names used for explanation in this manual are of

otherwise).

Refer to the table below for the difference:

iPod

3 (ALL RDM) 3

(unless mentioned

Continued...

ENGLISH

When you press or hold the following button(s)...

Button General operation

Turns on. Turns off if pressed and held.

SRC

Volume knob

(turn)

Volume knob

(press)

1 (–) / 2 (+) Selects the previous/next folder.

6 ( ) Pauses/resumes playback of a disc/ USB device/ iPod.

SCRL DISP

iPod

Selects the available sources (TUNER, USB/ iPod, CD, AUX, STANDBY), if the

power is turned on.

• If the source is ready, playback also starts.

• “iPod” or “CD” is selectable only when an iPod is connected or a disc is loaded.

Adjusts the volume level. Selects items.

Confirms selection. Enters [FUNCTION] settings.

Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW when “TUNER” is

selected as the source.

Enters Music Search mode.

Searches for radio station. Selects track/file. Fast-forwards/reverses tracks if pressed and held.

Changes the display information. Scrolls the display information if pressed and held. Enters clock adjustment mode directly (page 7) if pressed and held while

in clock display screen.

For :

Selects “iPod” source. Enters the controlling mode (MODE ON/ MODE OFF) for iPod playback if

pressed and held. (page 12)

For

Selects Random Play. (page 11)

Returns to the previous item. Exit from setting mode if pressed and held.

Getting started

Canceling the display demonstration

The display demonstration is always turned on unless you cancel it.

When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB]

Press the volume knob.

[YES] is selected as the initial setup.

Press the volume knob again to confirm.

[DEMO OFF] appears.

If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in

step 2, [DEMO MODE] appears and the display demonstration starts.

Setting the demonstration mode

Press the volume knob to enter [FUNCTION].

Turn the volume knob to select [DEMO MODE], then press to enter.

Turn the volume knob to select [ON] or [OFF].

If [ON] is selected, display demonstration starts if no operation is done for about

20 seconds.

Hold to finish the procedure.

Adjusting the clock

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [SETTINGS], then press to enter.

Turn the volume knob to select [CLOCK], then press to enter.

Turn the volume knob to select [CLOCK ADJUST] / [CLOCK ADJ], then press to enter.

Clock hour flashes on the display.

Turn the volume knob to adjust the hour, then press to enter minute adjustment.

Clock minutes flashes on the display.

Turn the volume knob to adjust the minute, then press to confirm.

Press 4

Hold to finish the procedure.

¢ to move between the hour and minute adjustment.

ENGLISH

Initial settings before operations

Press SRC to enter [STANDBY] mode.

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [INITIAL SET], then press to enter.

Turn the volume knob to make a selection, then press to confirm.

See table on page 8 for selection.

Hold to finish the procedure.

Continued...

Item Selectable setting (Preset: *)

PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/

LW). ; MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).

KEY BEEP ON */ OFF: Activates/deactivates the keypress tone. RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;

OFF *: Cancels.

P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.

––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

BUILT-IN AUX/ BUILTIN AUX

CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2:

SWITCH PREOUT/ SWITCH PRE

SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. F/W UP xx.xx YES *: Starts upgrading the firmware. ; NO:

ON *: Enables “AUX” in source selection. Sound of the connected external component is produce through

the car speakers. ; OFF: Disables “AUX” in source selection.

Forces to play as a music CD. No

sound can be heard if an audio file disc is played.

Except for REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on

the rear of the unit (through an external amplifier).

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

Cancels (upgrading is not activated).

Listening to the radio

Hold for about 2 seconds to memorize the current station.

Press briefly to recall memorized station.

Press SRC to select “TUNER.”

Press repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).

Press 4

¢ to search for a station.

Adjust [SETTINGS] mode settings

While listening to the radio...

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [SETTINGS], then press to enter.

Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

Hold to finish the procedure.

Item Selectable setting (Preset: *)

LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF *: Cancels.

SEEK MODE Selects the tuning mode for

AUTO MEMORY YES *: Automatically starts memorizing 6 stations with good reception. ; NO:

MONO SET ON: Improve the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes). PTY SEARCH Selects the available Program Type (see table below). Then, press

TI ON: Allows the unit to temporarily switch to Traffic Information. ; OFF *: Cancels. NEWS SET 00M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels. AF SET ON *: Automatically searches for another station broadcasting the same program in the same Radio Data

REGIONAL ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.

AUTO TP SEEK/ ATP SEEK

[MONO SET/ PTY SEARCH] is selectable only when the source is “FM.” [TI/ NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK/ ATP SEEK] is selectable only when the source is “FM.” If other playback source is selected, these settings are selectable under [TUNER SET] item. (page 17)

AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset

memory. ; MANUAL: Manually search for a station.

memorizing is not activated). (Selectable only if [NORMAL] / [NORM] is selected for [PRESET TYPE].) (page 7, 8)

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language (ENGLISH */ FRENCH/ GERMAN), then press to confirm.

System network with better reception when the current reception is poor. ; OFF:

ON *: Automatically searches for a station with better reception when the traffic information‘s reception is poor. ; OFF: Cancels.

/ ¢ buttons.

Cancels (automatic

/ ¢ to start searching.

Cancels.

ENGLISH

Available Program Type ([SPEECH]

SPEECH MUSIC NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M (music) ROCK M (music) EASY M (music)

LIGHT M (music) CLASSICS

RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY

OLDIES FOLK M (music) DOCUMENT

The unit will search for the Program type categorized under

The Radio Data System feature won't work where the service is not supported by any

broadcasting station.

If the volume is adjusted during reception of traffic information, the adjusted volume is

memorized automatically. It will be applied the next time Traffic Information function is turned on.

: White character item. ;

OTHER M (music)

WEATHER FINANCE CHILDREN SOCIAL

[MUSIC]

: Black character item)

[SPEECH]

[MUSIC]

NATION M (music)

if selected.

Listening to a disc/ USB device/ iPod

Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.)Loading slot

Press to select track/file. Hold to fast-forwards/reverses.

Press to select previous/next folder.

• Not available if “ALL RANDOM” is

selected.

Start playing a disc

Press SRC to turn on the power.

Insert a disc into the loading slot.

Playback starts automatically.

Press number button 6 ( ) to resume/pause playback (if necessary).

Discs that cannot be used

Discs that are not round. Discs with coloring on the recording surface or discs

that are dirty.

You cannot play a Recordable/ReWritable disc that

has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.)

8 cm CD cannot be used. Attempt to insert using an

adapter can cause malfunction.

USB terminal

Slide open the cover, then make the following connection.

The source automatically switches, and playback starts.

Connecting a USB device

CA-U1EX (Max.: 500 mA) (optional accessory)

USB device (commercially available)

Connecting an iPod

(for

)

Apple iPod

(commercially available)

KCA-iP102

(optional accessory)

Selecting Repeat Play

Press number button 4 (REP) repeatedly to make a selection.

Audio CD : TRACK/ TRAC (track) REPEAT,

REPEAT OFF AAC/MP3/WMA : FILE REPEAT, FOLDER/ FOLD (folder)

REPEAT, REPEAT OFF iPod : FILE REPEAT, REPEAT OFF

Selecting Random Play

Press number button 3 (ALL RDM) or repeatedly to make a selection.

Audio CD : DISC RANDOM, RANDOM OFF AAC/MP3/WMA/iPod : FOLDER/ FOLD (folder) RANDOM,

RANDOM OFF

For AAC/MP3/WMA/iPod : Press and hold

number button 3 (ALL RDM) or to select “ALL RANDOM.”

– Applicable only if “RANDOM OFF” is

selected initially.

–

For :

Changes the iPod browsing item to

“songs.”

Selecting a folder/track/file

Press to enter Music Search mode.

“SEARCH” appears, then the current file

name appears on the display.

Turn the volume knob to select a folder/ track/file, then press to confirm.

To return to the root folder (or first track for

audio CD), press number button 5.

To return to the previous folder, press . To cancel the Music Search mode, press

and hold .

< or > on the display indicates that

preceded/next item is available.

For USB device * and iPod: To skip search,

press 4 / ¢.

* This operation is effective only for the files

registered in the database created with Kenwood Music Editor. (See right column.)

About Audio file

Playable Audio file: AAC-LC (.m4a), MP3 (.mp3),

WMA (.wma) Playable disc media: CD-R/RW/ROM Playable disc file format: ISO 9660 Level 1/2, Joliet,

Romeo, Long file name. Playable USB device file system: FAT16, FAT32

Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.

About USB device

This unit can play AAC/MP3/WMA files stored on a USB

mass storage class device. Install the USB device in the place where it will not

prevent you from driving your vehicle properly. You cannot connect a USB device via a USB hub and

Multi Card Reader. Make sure all important data has been backed up to

avoid losing the data. Connecting a cable whose total length is longer than

5 m can result in abnormal playback.

About “KENWOOD Music Editor”

This unit supports the PC application “KENWOOD Music

Editor Light ver1.1” or later. When you use the audio file with database information

added by the “KENWOOD Music Editor Light ver1.1,”

you can search a file by title, album or artist name using

Music Search. In the Instruction manual, the term “USB device” is

used to mean the device that contains audio files with

database information added with KENWOOD Music

Editor. “KENWOOD Music Editor Light ver1.1” is available from

the following web site: www.kenwood.com/cs/ce/ For further information on “KENWOOD Music Editor

Light ver1.1,” refer to the site above or the application

help.

ENGLISH

Functions of

Selecting a song by alphabet

Press to enter Music Search mode.

“SEARCH” appears.

Turn the volume knob to select a category, then press to confirm.

Press again to enter alphabet search mode.

“SEARCH <

appears.

Turn the volume knob to select the character to be searched for.

Press 4 / ¢ to move to the entry position.

You can enter up to three characters.

Press the volume knob to start searching.

Turn the volume knob to select a folder/ track/file, then press to confirm.

To return to the previous folder, press . To return to the top menu, press number

button 5.

To cancel the Alphabet Search mode, press

and hold .

A longer searching time is required if there

are many songs or playlists in the iPod.

To search for a character other than A to Z

and 0 to 9, enter only “ * ”.

The article (a, an, the) of songs name will

be skipped during search.

– – –

>”/ “SRCH <

– – –

>”

Selecting App & iPod Control Mode

Press and hold iPod to make a selection.

MODE ON: Control iPod from the iPod *.

“APP&iPod MODE”/ “APP&iPod” appears on the display.

MODE OFF: Control iPod from the unit. * You can still control play/pause, select files,

fast-forward/reverse files from the unit.

with iPod

Adjust [SETTINGS] mode settings

While listening to an iPod...

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [SETTINGS], then press to enter.

Turn the volume knob to select [SKIP SEARCH], then press to enter.

Turn the volume knob to make a selection, then press to confirm.

0.5% (initial)/ 1%/ 5%/ 10% : Sets the

ratio of skip when searching for a song in Music Search mode.

(Holding 4 / ¢ skips songs at 10%

regardless of the setting made.)

Hold to finish the procedure.

About compatible iPod/iPhone

Made for

– iPod touch (1st, 2nd, 3rd, and 4th generation)

– iPod classic

– iPod with video

– iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation)

– iPhone 4

– iPhone 3GS

– iPhone 3G

– iPhone

For the latest compatible list and software version of

iPod/iPhone, see: www.kenwood.com/cs/ce/ipod

If you start playback after connecting the iPod, the

music that has been played by the iPod is played first.

In this case, “RESUMING” is displayed without

displaying a folder name, etc. Changing the browse item will display a correct title, etc.

You cannot operate iPod if “KENWOOD” or “✓”

displayed on iPod.

Listening to the other external components

Preparation : Make sure [ON] is selected for [BUILT-IN AUX] / [BUILTIN AUX]. (page 7, 8)

ENGLISH

Press SRC to select “AUX.”

Turn on the external component and start playing.

Turn the volume knob to adjust the volume.

Portable audio device

(commercially available)

Auxiliary input jack

3.5 mm stereo mini plug (commercially available)

Using the remote controller (RC-405)

Equipped for

Remote sensor

Do not expose to bright sunlight.

Preparation:

When you use the remote controller for the first time, pull out the insulation sheet.

Insulation sheet

If the effectiveness of the remote controller decreases, replace the battery.

Continued...

RC-405

(Not used.)

Caution:

Do not set the remote control in hot places

such as on the dashboard.

Lithium battery.

Danger of explosion if the battery is

incorrectly replaced. Replace only with the same or equivalent type.

The battery pack or batteries shall not be

exposed to excessive heat such sunshine, fire or the like.

Keep battery out of reach of children and in

original package until ready to use. Dispose of used batteries promptly. If swallowed contact physician immediately.

Basic operations

SRC : Selects the available sources. VOL : Adjusts the volume level.

5 / ∞ : Selects folder/track/file (in Music

Search mode).

ENT : Pauses/resumes playback. Confirms selection (in Music

Search mode).

*AM– / #FM+ : Selects bands. Selects folders. 4 / ¢ (+) : Searches for radio station. Selects track/file.

1 – 6 : Selects preset station. AUD : Enters [AUDIO CTRL] settings

directly.

ATT : Attenuates the sound. (To return

to the previous level, press the button again.)

: Returns to the previous item (in

Music Search mode).

EXIT : Exit from setting mode.

Direct Access Tuning

Press FM+ / AM– to select a band.

Press DIRECT to enter Direct Access Tuning mode.

“– – – –” appears on the display.

Press the number buttons to enter the frequency.

Press 4 / ¢ ( + ) to search for the frequency.

To cancel Direct Access Tuning mode, press

or EXIT.

If no operations is done for 10 seconds

after step 3, Direct Access Tuning is automatically canceled.

Direct Music Search

• Not available if Random Play is selected.

• Not applicable for iPod and Kenwood Music

Editor.

Press DIRECT to enter Direct Music Search Mode.

“– – –” appears.

Press the number buttons to enter the track number.

Press 4 / ¢ to search for the music.

To cancel the Direct Music Search Mode,

press or EXIT.

+ 32 hidden pages