How to attach/detach the faceplate
How to reset your unit
Initial settings before operations
Basic operations 5
Getting started 6
Canceling the display demonstration
Setting the demonstration mode
Adjusting the clock
Listening to the radio 6
Adjust [SETTINGS] mode settings
Listening to a disc 8
Selecting Repeat Play
Selecting Random Play
Selecting Scan Play
Selecting a folder/track/file
Listening to the other external
components 9
Function settings 10
Troubleshooting 11
Installation/connection 12
Basic procedure
Warning
Caution
Wiring connection
Installing the unit
Specifications 15
WARNING
Stop the car before operating the unit.
Important to know...
To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
Caution: Adjust the volume so that you
can hear sounds outside the car. Driving
with the volume too high may cause an
accident.
Condensation: When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors.
In this case, remove the disc and wait for
the moisture to evaporate.
This unit can only play the CDs with:
The illustrations in this manual are
examples used to explain more clearly
how the controls are used. Therefore, what
appears on the illustrations may differ from
what appears on the actual equipment.
If you experience problems during
installation, consult your Kenwood dealer.
When you purchase external components,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
Detailed information and notes about the
playable audio files are stated in an online
manual on the following site:
www.kenwood.com/cs/ce/audiofile/
2
Declaration of Conformity with regard to
130.com.ua
Autogood products Internet store “130”
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,
192-8525 Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN,
The Netherlands
This Product is not installed by the
manufacturer of a vehicle on the production
line, nor by the professional importer of a
vehicle into an EU Member State.
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection
systems)
Products and batteries with the
symbol (crossed-out wheeled bin)
cannot be disposed as household
waste.
Old electrical and electronic
equipment and batteries should
be recycled at a facility capable
of handling these items and their
waste byproducts.
Contact your local authority
for details in locating a recycle
facility nearest to you. Proper
recycling and waste disposal will
help conserve resources whilst
preventing detrimental effects on
our health and the environment.
Notice: The sign “Pb” below the
symbol for batteries
indicates that this battery
contains lead.
The marking of products using lasers
ENGLISH
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It means
that the unit is utilizing laser beams that
are of a weaker class. There is no danger of
hazardous radiation outside the unit.
For Turkey
Bu ürün 26891sayılı Resmi Gazete’de
yayımlanan Elektrikli ve Elektronik Eşyalarda
Bazı Zararlı Maddelerin Kullanımının
Sınırlandırılmasına Dair Yönetmeliğe uygun
olarak üretilmiştir.
This product complies with Directive,
Number 26891 regarding “REGULATION ON
THE RESTRICTION OF THE USE OF CERTAIN
HAZARDOUS SUBSTANCES IN LECTRICAL
AND ELECTRONIC EQUIPMENT”.
Muting upon the reception of a
phone call
To use this feature, connect the MUTE lead
to your telephone using a commercial
telephone accessory. (page 13, 14)
When a call comes in, “CALL” appears.
The audio system pauses.
To continue listen to the audio system
during a call, press SRC. “CALL”
disappear and the audio system resumes.
When a call ends, “CALL” disappear.
The audio system resumes.
3
Preparation
130.com.ua
Autogood products Internet store “130”
How to attach/detach the faceplate
1
2
Do not expose the faceplate to direct
sunlight, excessive heat, or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
Keep the faceplate in its casing while
detached.
2
The faceplate is a precision piece of
equipment and can be damaged by shocks
or jolts.
To prevent deterioration, do not touch the
terminals of the unit and faceplate with
1
your fingers.
How to reset your unit
If this unit fails to operate properly, press the
reset button.
The unit returns to
factory settings when the
reset button is pressed.
Reset button
Initial settings before operations
1
Press SRC to enter [STANDBY] mode.
2
Press the volume knob to enter [FUNCTION] mode.
3
Turn the volume knob to select [INITIAL SET], then press to enter.
4
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
5
Hold to finish the procedure.
ItemSelectable setting (Preset: *)
PRESET TYPE NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;
MIX:
Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).
KEY BEEPON */ OFF: Activates/deactivates the keypress tone.
RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
OFF *: Cancels.
P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
BUILTIN AUX ON1 *: Outputs sound of the connected external component when “AUX” is selected as the source. ;
ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When you
turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn
the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.
CD READ1 *: Automatically distinguishes between audio file disc and music CD. ; 2:
SWITCH PRE REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the
rear of the unit (through an external amplifier).
SP SELECTOFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
[SWITCH PRE] is selectable only with KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY.
Forces to play as a music CD.
4
Basic operations
130.com.ua
Autogood products Internet store “130”
Loading slot
Detaches the faceplate
Volume knob
The following indicator lights up when...
ST: A stereo broadcast is received (FM).
IN: A disc is in the unit.
When you press or hold the following button(s)...
ButtonGeneral operation
Turns on.
Turns off if pressed and held.
SRC
Volume knob
(turn)
Volume knob
(press)
BAND
/
4
SCRL DISP
Selects the available sources (TUNER, CD, AUX, STANDBY), if the power is
turned on.
• If the source is ready, playback also starts. “CD” is selectable only when a disc is
loaded.
Adjusts the volume level.
Selects items.
Confirms selection.
Enters [FUNCTION] settings.
Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW.
Selects the next folder.
Pauses/resumes playback of a disc.
Mutes the sound while listening to a radio or an external component
connected to the auxiliary input jack.
Searches for a radio station.
¢
Selects track/file.
Fast-forwards/reverses tracks if pressed and held.
Changes the display information.
Scrolls the display information if pressed and held.
Enters clock adjustment mode directly (page 6) if pressed and held while in
clock display screen.
Returns to the previous item.
Exit from setting mode if pressed and held.
TI: Traffic Information function is turned on.
RDS: RDS service is available.
Display window
Ejects the disc
ENGLISH
Auxiliary input jack
5
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.