Kenwood H2EV User Manual

SYSTEM-H2EV

Operating Instructions

and Installation Manual

Table of Contents

Congratulations . . . . . . . . . . . . . . . . . .2

SYSTEM-H2EV Package Contents . . . . . . . . . 2

Safety Precautions . . . . . . . . . . . . . . . .4

Installation In A Vehicle . . . . . . . . . . . . . .6

Installing the Antenna . . . . . . . . . . . . . . .9

Installation In A Home . . . . . . . . . . . . . .11

Finding a Location for the Antenna . . . . . . .11

Front-Panel Controls And Features . . . . . . .13

Remote Control Functions . . . . . . . . . . . . 14

Activating Your SIRIUS Subscription . . . . . . . 15

Removing Here2Everywhere from the Car Cradle . 16

Basic Operation and Screens . . . . . . . . . . 17

Selecting Channels . . . . . . . . . . . . . . . 17

Setting/Using Channel Presets . . . . . . . . . 20

Saving/Recalling Music Information . . . . . . .21

Song Seek (S-Seek) Feature . . . . . . . . . .22

Display Options . . . . . . . . . . . . . . . . .23

FM Transmitter Option . . . . . . . . . . . . . .24

Antenna Aiming . . . . . . . . . . . . . . . . .27

Memory Options . . . . . . . . . . . . . . . . . 27

Clock Features . . . . . . . . . . . . . . . . . . 27

Program Alert . . . . . . . . . . . . . . . . . .28

Specifications . . . . . . . . . . . . . . . . . . 30

Troubleshooting Guide . . . . . . . . . . . . . .31

Congratulations!

Your Here2Everywhere™ Portable SIRIUS® Satellite Tuner lets you enjoy SIRIUS Satellite Radio—over 120 channels of satellite radio. The system-H2EV includes everything you need for installation in a vehicle or home. If you’d like to install your Here

Everywhere Portable Sirius Satellite Tuner

in an additional vehicle or boat, the KPA-H2EC car kit is also available separately.

Use this manual to familiarize yourself with all of Here2Everywhere’s features and capabilities.

For the latest information about this and other Kenwood products, visit the Kenwood USA Corporation Web site at: www.kenwoodusa.com.

SYSTEM-H2EV Package Contents

Unpack your Here2Everywhere car kit and make sure that everything listed here is present:

1. Here2Everywhere

portable tuner

2. Remote control

3. 2 x AAA batteries

4. Car Docking Cradle

5. Cigarette lighter adapter

6. Car Magnetic-Mount Antenna

7. Car Windshield Docking Base

with suction cup

8. Extra Power Supply Cord with

Fuse (for optional use by a professional installer)

9. Home Docking Cradle

10. Home Power Supply

11. Stereo Mini-Jack Cord

(Stereo Male RCA to

3.5mm Male Mini Plug)

12. Home Antenna

If anything is missing or damaged, or if your Here

Everywhere fails to operate, notify your dealer

immediately. If your Here2Everywhere was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to ship your Here2Everywhere in the future.

Safety Precautions

Warning

Take the following precautions to prevent traffic accidents and avoid personal injury:

• Installation must be performed according to this

installation manual. Kenwood is not responsible for issues arising from installations not performed according to the procedures in this manual.

• Do not install the unit where it may obstruct your

view through the windshield or of your vehicle’s indicator displays.

• Do not install the unit where it may hinder the

function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident.

• The installation and use suggestions contained

in this manual are subject to any restrictions or limitations that may be imposed by applicable law—the purchaser should check applicable law for any restrictions or limitations before installing and/or operating this unit.

• Failure to follow these safety instructions and

warnings may result in a serious accident.

Warning

Take the following precautions to prevent fire and avoid personal injury:

• To avoid short circuits, never put or leave any

metallic objects (coins, tools, etc.) inside the unit.

• If the unit emits smoke or strange smells, turn the

power off immediately and consult your Kenwood dealer.

• Do not drop the unit or subject it to strong

shocks.

• If the LCD display becomes damaged or broken,

do not touch the liquid crystal fluid. The fluid may be dangerous to your health or even fatal. If the liquid crystal fluid contacts your body or clothing, immediately wash it off with soap and water.

Caution

Take the following precautions to keep the unit in proper working order:

• Be sure the unit is connected to a 12V DC power

supply with a negative ground connection.

• Do not open the unit.

• Do not install the unit where it will be exposed to

high levels of humidity, moisture, or dust.

• When replacing a fuse, use only a new one with

the proper rating. Using a fuse with the wrong rating may cause the unit to malfunction.

• To prevent a short circuit when replacing a fuse,

first disconnect the wiring harness.

• When drilling holes to mount the unit, make sure

not to damage wiring or other systems that may be close to the mounting surface.

Note: If the unit doesn’t seem to be working properly:

• Turn the unit’s power off, wait 5–10 seconds, then

turn the power on again.

• If the unit still mis-operates, turn the unit’s

power off, remove it from the cradle, wait 5–10 seconds, replace it in the cradle, and turn the power back on.

If the problem persists, consult your Kenwood dealer.

FCC Warning

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with these instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment

and receiver

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV

technician for help

Cleaning the Unit

If the unit becomes dirty, turn its power off and wipe it clean with a soft, dry cloth.

Do not use hard cloths or paint thinner, alcohol, or other volatile solvents to clean the unit. These may cause damage or remove indicator characters.

Warning

Do not operate the unit in a way that might divert

your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.

Installation in a Vehicle

Note: Do not put Here2Everywhere in the Car Docking Cradle until you have completed the cradle installation.

Step 1: Placing the Base and Cradle

First, determine where you want to mount Here2Everywhere.

There are two options for installing the Here2Everywhere. Select the option and location that provides good visibility of and access to Here

Everywhere’s front panel while maintaining

a safe driving experience.

Base nut

Pivot (where the Cradle attaches)

Pivot

Suction cup base

Button

Lever

DC 12V

AUDIO OUT FM OUT

Audio Output FM Out (optional) Antenna Input

Power

ANT

Option 1: Windshield Mount

• Do not install Here2Everywhere on the windshield

if it may obstruct your view while driving.

• Attach the Car Docking Cradle to the Car

Windshield Docking Base using the four enclosed screws.

• Loosen the base nut on the Car Windshield Docking

Base so that the suction cup portion rotates easily. Do not remove the base nut entirely.

• Make sure the suction cup lever is in the up

position.

• Position the suction cup base

on the desired windshield location. The word “PRESS” should be upright.

• Press the button marked

“PRESS” while the suction

cup is on the windshield. Then rotate the lever down, keeping the button pressed down at the same time.

• The suction cup base

should be firmly attached to the windshield.

Note: To remove the Car Windshield Docking Base, return the lever to the up position before attempting to remove the Base.

Option 2: Console (Professional) Mount

Ask the dealer where you purchased your Here2Everywhere about professional installation options. One option is to have the dealer mount the Pivot of the Car Windshield Docking Base to the console or other available location in the vehicle. There are four screws to remove. The Pivot screw holes match the AMPS standard for mounting systems, so any AMPS-compatible bracket for your vehicle will accept the Pivot of the Docking Base. Many car audio dealers carry these brackets.

If you choose to do the console mount yourself, please observe the following guidelines:

• Do not install Here2Everywhere where it may

obstruct your view through the windshield or your view of your vehicle’s indicator displays.

• Do not install Here2Everywhere where it will

hinder your access to the vehicle’s controls.

• Do not install Here2Everywhere where it may

hinder the function of safety devices such as an airbag. Doing so may prevent the air-bag from functioning properly in the event of an accident.

• Find a location that provides good visibility of and

access to Here2Everywhere’s front panel.

• If using screws, be sure that you do not damage

wiring or other systems that may be close to the mounting surface.

• Prior to mounting the Pivot, attach the Car

Docking Cradle to the Pivot using the four enclosed screws.

Step 2: Attaching Power in a Vehicle

You have two options for powering the Here2Everywhere in your vehicle:

• Plug the cigarette lighter adapter into the back of

the cradle, as shown. Don’t plug the adapter into the cigarette lighter until the installation is completed (see pg. 10, Step 6).

DC 12V

AUDIO OUT FM OUT

ANT

• Or, wire the Extra Power Supply Cord with Fuse to

the vehicle +12V battery line. Use caution in wiring to your vehicle’s electrical system. Kenwood recommends having an audio installer professional perform this step.

DC 12V

AUDIO OUT FM OUT

FUSE

JEF-703

ANT

Step 3: Connecting Audio

You have two options to connect audio to Here2Everywhere in your vehicle:

• FM Station: Tune your vehicle radio to an unused

FM station, and using the Menu option on the Here2Everywhere, select the same station. To use the Menu option, please see pg. 23. When using Here2Everywhere, make sure you’ve tuned to the same station as you have previously set in the Menu setup.

• Aux In: Or, if your vehicle radio has an Aux Input,

plug the supplied Stereo Mini-Jack Cord into the back of the cradle, as shown on the right. Plug the Stereo Mini-Jack Cord’s white (L ch.) and red (R ch.) connectors into your car stereo. Because the connectors may be in the back of the car stereo, you may want to have an audio installer professional perform this step.

Tip: The Here2Everywhere also has a Wired FM Output. If you experience noise or other audio, you may want to have a professional installer add a connection from the Wired FM Output to the Car antenna input. Consult your car audio dealer or professional installer for assistance.

Step 4: Installing the Antenna

1. Turn Here2Everywhere’s power off and remove it from the cradle; unplug the cigarette lighter adapter from the cigarette lighter; unplug the antenna from the cradle.

2. Find an antenna location on a metal surface at least 12" x 12". The antenna should be mounted exactly

5.5" (the length of the antenna’s tail) away from the vehicle’s rear window, as shown in the picture. The antenna’s powerful magnets will secure it to the metal surface. There is an optional antenna cable protector, or tail, included with the car antenna.

Note: The best reception is achieved when the antenna is mounted on the roof; mounting on the trunk lid will work for convertibles. If the vehicle has a roof rack or skid ribs, it may be necessary to mount the antenna off-center.

3. Route the cable from the lowest point of the rear window into the trunk. Take advantage of any

existing cable channels or wiring conduits.

For SUVs, Minivans & 5-door Vehicles: Bring the cable into the vehicle under the rubber molding for the tailgate, and continue under the interior trim.

4. From the trunk, route the cable around the passenger compartment and to the back of the cradle.

• Do not pull the cable across sharp edges

that could damage it.

• Keep the cable away from areas where

it could become tangled in driver’s or passengers’ feet.

5. Plug the antenna into the back of the cradle (right).

DC 12V

AUDIO OUT FM OUT

Note: KENWOOD RECOMMENDS UNPLUGGING THE CIGARETTE LIGHTER ADAPTER AFTER YOU TURN OFF THE VEHICLE’S IGNITION. (In some vehicles, the cigarette lighter remains active after the ignition has been turned off, and leaving Here2Everywhere’s cigarette lighter adapter plugged into the cigarette lighter could drain the vehicle’s battery.)

6. Confirm that the antenna is mounted in a good location.

• Make sure the vehicle is not in a garage

or somewhere the satellite signal could be blocked.

• Slide Here2Everywhere all the way into the cradle

so that the connector at the bottom of the unit makes proper contact in the cradle. Press the power ( ) button to turn Here

Everywhere on.

• If your Here2Everywhere has been properly

connected and the antenna is receiving the SIRIUS signal (Preview Channel #184), you

Installation in a Home

Note: Do not put the Here2Everywhere in the Home Docking Station until you have completed the installation.

1. Plug the audio cable’s mini connector into the back of the cradle, as shown.

2. Plug the audio

ANT

AUDIO OUT

DC 12V

3. Plug the AC cord into the power supply, then plug the power supply into the back of the cradle, as shown. Don’t plug the AC cord into a wall outlet until the installation is completed.

4. Plug the antenna into the back of the cradle until it is firmly seated, as shown.

cable’s white (L ch.) and red (R ch.) connectors into your audio system’s available audio input.

Finding a Location for the Antenna

Due to the paths of the SIRIUS satellites over the U.S., the best location for the antenna will depend on what part of the country you live in, the orientation of your home, and the locations of any obstructions that could prevent the satellite signal from reaching the antenna. The best antenna location is on the roof, facing straight up (see below).

• The location of the “X” on the map on pg. 13

must be visible to the antenna.

will hear audio. If you do not hear audio, the

ANT

the antenna until you hear audio. (See Antenna

display will read “Acquiring Signal.” Re-orient

DC 12VAUDIO OUT

ANT

DC 12VAUDIO OUT

Aiming, on page 27 to use the ANTENNA SIGNAL screen to aim the antenna.)

+ 11 hidden pages