Kenwood DDX719, DDX7049BT, DDX319, DDX4049BT, DDX419 User Manual

...

DDX719 DDX7049BT DDX419 DDX4049BT DDX319 DDX3049

MONITOR WITH DVD RECEIVER

INSTRUCTION MANUAL

Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD Receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049 Serial number

US Residence Only

LVT2268-001A (KN/RN)

Contents

Before use ......................................3

How to reset your unit .............................................3

INTRODUCTIONS

Initial Settings ............................... 5

Initial setup ......................................................................5

Adjusting the panel angle .....................................5

Updating the system .................................................6

Activating the security function .........................7

Component names and

functions .................................. 8

Setting the clock ..........................10

Common operations ...................11

Turning on the power ..........................................11

Turning off the power ..........................................11

Adjusting the volume ...........................................11

Putting the unit in standby ...............................11

Turning off the screen ..........................................11

Switching screens ....................... 12

AV SOURCE OPERATIONS

Selecting the playback source....13

Displaying the source control screen ..........14

Disc operations ............................15

Playing a disc ..............................................................15

Playable disc types...................................................16

Playback operations ...............................................17

Settings for disc playback ..................................21

USB operations ............................22

Playing a USB device .............................................22

Listening to the iPod/iPhone

device .....................................24

iPod/iPhone playback operations .................25

Selecting a track/video from menu on the

iPod/iPhone .................................................................26

Operating in iPod/iPhone control mode ...26

PANDORA® operations ..........................................27

Listening to the radio ..................29

Listening to the SiriusXM™ Satellite

Radio ......................................32

Using other external

components ...........................39

AV-IN .................................................................................39

Using the external navigation unit ...............40

Sound adjustment .......................41

2 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Using the sound equalization .........................41

Adjusting the cross over frequency ..............42

Changing the display design ......43

Setting for video playback .........45

Picture adjustment .................................................45

Changing the aspect ratio .................................46

Zooming picture .......................................................46

Using a rear view camera ............47

Setting menu items ..................... 48

Memorizing/recalling the settings ................52

Locking the settings ...............................................52

Adjusting the touch position ............................52

BLUETOOTH OPERATIONS

(Only for DDX719/DDX7049BT/DDX419/ DDX4049BT)

Information for using Bluetooth®

devices ...................................53

Bluetooth operations ..................53

Connecting Bluetooth devices .......................54

Using the Bluetooth mobile phone ............56

Using the Bluetooth audio player .................61

Bluetooth device settings ...................................61

USING THE REMOTE CONTROLLER

Overview ...................................... 63

Operations from the remote

controller ...............................64

REFERENCE

Maintenance ................................68

More about this unit ...................69

Troubleshooting ..........................71

Accessories/Installation

Procedure ...............................76

Connecting Wires to Terminals ... 78 Connecting a USB device/iPod/

iPhone ....................................79

Connecting Other Products ........80

Installing/Removing the Unit ..... 81

Specifications ..............................83

KS-UBT1 (USB Bluetooth

Adapter) .................................86

Before use

WARNINGS:

(To prevent accidents and damage)

• DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

If you need to operate the unit while

driving, be sure to look around carefully.

• The driver must not watch the monitor while driving.

Cautions on the monitor:

• The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective.

• Do not expose the monitor to direct sunlight.

• Do not operate the touch panel using a ball-point pen or similar tool with the sharp tip.

Press the buttons on the touch panel with

your finger directly (if you are wearing a glove, take it off).

• When the temperature is very cold or very hot... – Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or

may move slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments.

For safety...

• Do not raise the volume level too much, as this will make driving dangerous by blocking outside sounds, and may cause hearing loss.

• Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

How to reset your unit

DDX719/DDX7049BT

Reset button

DDX419/DDX4049BT/DDX319/DDX3049

If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed (except the registered Bluetooth devices).

How to read this manual:

• Illustrations of DDX719 are mainly used for

• This manual mainly explains operations

• < > indicates the variable screens/menus/

• [ ] indicates the buttons on the touch

• Indication language: English indications

The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels.

Reset button

explanation.

using the buttons on the monitor panel and touch panel. For operations using the remote controller (RC-DV340: supplied only for DDX7049BTX/DDX4049BT/ DDX3049), ☞ page 63.

operations/settings that appear on the touch panel.

panel.

are used for the purpose of explanation. You can select the indication language from the <Setup> menu. (☞ page 51)

English 3

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

DDX719X/DDX419/DDX319:

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.

JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN

THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.

Location : Top Panel

DDX7049BT/DDX4049BT/DDX3049: The marking of products using lasers

CLASS 1

LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

DDX719/DDX7049BT/DDX419/ DDX4049BT: About KS-UBT1 (USB Bluetooth Adapter)

The USB Bluetooth Adapter is attached to this unit when shipped from the factory. When the adapter is removed, store it in a safe place.

4 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

INTRODUCTIONS

Initial Settings

Initial setup

When you power on the unit for the first time or reset the unit, the initial setting screen appears.

• You can also change the settings on the <Setup> screen. (☞ page 48)

Language Select the text

Angle

Only for DDX719/ DDX7049BT

AV Input Select an external

R-CAM Interrupt

Panel Color Select the color of

language used for on-screen information. (☞ page 51 )

Adjust the panel angle. (☞ the right column)

component to play — <AV-IN2> or <iPod>. (☞ page 50)

Select <ON> when connecting the rear view camera. (☞ page 50)

the buttons on the monitor panel. (☞ page 43)

Adjusting the panel angle

(Only for DDX719/DDX7049BT )

You can change the panel angle.

1 Select an angle (0 – 6).

To set the current position as the power off position, select <Memory>.

2 Finish the procedure.

English 5

Updating the system

You can update the system by connecting a USB device containing the update file.

1 Create an update file, copy it

to a USB device, and connect it to the unit.

To connect a USB device, ☞ page 79 .

2 On <Top Menu>:

It may take a while. If the update has been complete successfully, “Update Completed” appears. Reset the unit.

* If the update has failed, turn the power off

and then on, and retry the update.

* Even if you have turned off the power

during update, you can restart the update after the power is turned on. The update will be performed from the beginning.

6 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Activating the security function

You can activate the security indicator to protect your receiver system against theft.

1 On <Top Menu>:

The security indicator on the monitor panel flashes when the vehicle ignition is off.

To cancel, select <OFF>.

English 7

Component names and functions

DDX719/DDX7049BT

Screen (Touch panel) Monitor panel

1 Reset button/Power indicator/Security

indicator

• Resets the unit. (☞ page 3)

• Lights up while the unit is turned on.

• Flashes when the security function is activated. (☞ page 7 )

2 ATT button (Press)

• Attenuates the sound.

V.OFF button (Hold)

• Turns off/on the screen. (☞ page 11)

3 Volume

• Decreases the volume.

4 Volume (up) button (☞ page 11)

• Increases the volume.

5 AUD button (Press)

• Displays the <Equalizer> screen. (☞ page 41)

R-CAM button (Hold)

• Displays the picture from the rear view camera.

8 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

(down) button (☞ page 11)

6 AV button (Press)

• Displays the current source screen. AV OUT button (Hold)

• Selects the AV source for external monitor or amplifier.

7 MENU/

• Turns off the power. (Hold)

• Turns on the power. (Press)

• Displays the <Top Menu> screen. (Press) (☞ page 12)

8 TEL button (Press)

• Displays the <Handsfree> screen. (☞ page 54)

FNC button (Hold)

• Displays the source control screen. (☞ page 12)

9 0 (Eject) button

• Ejects the disc (Tilts the monitor panel fully).

• Opens/Closes the monitor panel.

p Remote sensor

button

DDX419/DDX4049BT/DDX319/DDX3049

Screen (Touch panel) Monitor panel

1 Loading slot 2 0 (Eject) button

Ejects the disc.

3 Remote sensor 4 Reset button/Power indicator/Security

indicator

• Resets the unit. (☞ page 3)

• Lights up while the unit is turned on.

• Flashes when the security function is activated. (☞ page 7 )

5 MENU/

button

• Turns off the power. (Hold)

• Turns on the power. (Press)

• Displays the <Top Menu> screen. (Press) (☞ page 12)

6 AV/AV OUT button

• Displays the current source screen. (Press)

• Selects the AV source for external monitor or amplifier. (Hold)

7 For DDX419/DDX4049BT : TEL/V.OFF button

• Displays the <Handsfree> screen. (Press) (☞ page 54)

• Turns off/on the screen. (Hold) (☞ page 11)

For DDX319/DDX3049 :

AUD/V.OFF button

• Displays the <Equalizer> screen. (Press) (☞ page 41)

• Turns off/on the screen. (Hold) (☞ page 11)

8 VOL/ATT knob (☞ page 11)

• Attenuates the sound. (Press)

• Adjusts the audio volume. (Turn)

For DDX419/DDX4049BT only:

AUD button

• Displays the <Equalizer> screen. (Hold) (☞ page 41)

9 FNC/R-CAM button

• Displays the source control screen. (Press) (☞ page 12)

• Displays the picture from the rear view camera. (Hold)

p USB input terminal q iPod/AV-IN2 input terminal

Caution on volume setting:

Digital devices (CD/USB) produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level.

You can change the color of the buttons on the monitor panel. (☞ page 43)

English 9

Setting the clock

1 Display <Top Menu> screen.

2 Display <Setup> screen.

4 Set the clock time.

<NAV> *

<OFF> Sets the clock manually.

Adjust the hour

Adjust the minute

[Reset]: Sets the minute to “00.”

Synchronizes the clock time with the connected navigation unit.

Synchronizes the clock time with FM RBDS.

(☞ below)

Example: 3:00 – 3:29 = 3:00 3:30 – 3:59 = 4:00

5 Finish the procedure.

* Appears only when the navigation unit is

connected.

10 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Common operations

Turning on the power

DDX719/ DDX7049BT

DDX419/ DDX4049BT/ DDX319/DDX3049

Turning off the power

DDX719/ DDX7049BT

DDX419/ DDX4049BT/ DDX319/DDX3049

(Hold)

Adjusting the volume

To adjust the volume (00 to 35)

DDX719/DDX7049BT

IncreaseDecrease

DDX419/DDX4049BT/DDX319/DDX3049

IncreaseDecrease

Putting the unit in standby

Turning off the screen

DDX719/DDX7049BT

(Hold)

DDX419/DDX4049BT DDX319/DDX3049

To attenuate the sound

DDX719/ DDX7049BT

The ATT indicator lights up.

To cancel the attenuation, press the ATT button (DDX719/DDX7049BT ) or VOL/ ATT knob (DDX419/DDX4049BT/DDX319/ DDX3049 ) again.

DDX419/ DDX4049BT/ DDX319/DDX3049

(Hold) (Hold)

The screen is turned off.

To turn on the screen, press MENU/

English 11

Switching screens

Source control screen

• Changes the AV source.

• Displays the <Setup> screen.

You can select 3 items to be displayed in

☞ page 13 )

this area. (

☞ page 11

Press [ ] to return to the previous screen.

<Setup>

Changes the detailed settings.

Changes the page

Touch screen operation

Displays the video control menu while playing a video.

Goes to the previous

chapter/track.*

Displays the source control screen while playing a video.

• The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.

Not available for video from an external component and rear view camera.

Goes to the next chapter/ track.*

12 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

AV SOURCE OPERATIONS

Selecting the playback source

DDX719/DDX419/DDX319

DDX7049BT/DDX4049BT/DDX3049

NAV

*3 (☞ page 40)

Displays the navigation screen when a navigation unit is connected.

DISC

(☞ page 15)

TEL

*4 (☞ page 57)

USB

(☞ page 22)

iPod

*5 (☞ page 24)

TUNER

(☞ page 29)

AV-IN 1/AV-IN 2

*5 (☞ page 39)

Plays a disc.

Displays the phone control screen.

Plays files on a USB device.

Plays an iPod/iPhone.

Switches to the radio broadcast.

Switches to an external component connected to AV-IN input terminal.

Bluetooth

PANDORA

SiriusXM

*4 (☞ page 61)

*6 (☞ page 27)

*6 (☞ page 32)

You can select 3 items to be displayed in this area. (☞ page 49) Switches between the previous and next pages. Only for DDX7049BT/DDX4049BT/DDX3049. When no navigation unit is connected, “No Navigation” appears. Only for DDX719/DDX7049BT/DDX419/DDX4049BT. Select an appropriate input setting on <AV Input>. (☞ page 50) Only for DDX719/DDX419/DDX319.

Plays a Bluetooth audio player.

Switches to the PANDORA® internet radio broadcast.

Listen to SiriusXM™ channels.

English 13

Displaying the source control screen

On each playback screen, perform the following:

DDX719/DDX7049BT DDX419/DDX4049BT/DDX319/

(Hold)

• For DDX719/DDX7049BT, pressing and holding TEL hides the operation buttons. For DDX419/ DDX4049BT/DDX319/DDX3049, pressing FNC/R-CAM hides the operation buttons.

• The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.

DDX3049

14 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Disc operations

Playing a disc

• If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc.

Inserting a disc

DDX719/DDX7049BT

To eject a disc

DDX719/DDX7049BT

Label side

DDX419/DDX4049BT/DDX319/DDX3049

Label side

The source changes to “ starts.

• The IN indicator lights up while a disc is inserted.

• If “

” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “

operations will not be accepted.

• When playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo.

DISC

” and playback

,”

DDX419/DDX4049BT/DDX319/DDX3049

• You can eject a disc when playing another AV source.

• If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

When removing a disc, pull it horizontally.

Closing the monitor panel (For DDX719/DDX7049BT )

After removing the disc, press the eject button again. The monitor panel closes.

English 15

Playable disc types

Disc type Recording format, file type, etc Playable

DVD DVD-Video *

Region Code:

• For DDX719/DDX419/DDX319: 1

• For DDX7049BT/DDX4049BT/DDX3049: 4

DVD-Audio/DVD-ROM

DVD Recordable/ Rewritable (DVD-R/-RW * +R/+RW *

)

• DVD Video: UDF bridge

• DVD-VR

• DivX *

/MPEG1/MPEG2/ JPEG/MP3/WMA/WAV/ AAC: ISO 9660 level 1,

DVD-Video

DVD-VR *

DivX *5/MPEG1/MPEG2

JPEG

MP3/WMA/WAV/AAC

MPEG4/DVD+VR/DVD-RAM

level 2, Romeo, Joliet

Dual Disc DVD side

Non-DVD side

CD/VCD DTS-CD/Audio CD/CD Text (CD-DA)

VCD (Video CD)

SVCD (Super Video CD)/CD-ROM/CD-I(CD-I Ready)

CD Recordable/ Rewritable (CD-R/-RW)

• ISO 9660 level 1, level 2, Romeo, Joliet

CD-DA

VCD (Video CD)

DivX *

JPEG

MP3/WMA/WAV/AAC

MPEG4

If you insert a DVD Video disc of an incorrect Region Code, “Region code error ” appears on the screen.

DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not playable.

It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as its disc type when a +R/+RW disc is loaded. +RW double layer discs are not playable.

This unit cannot play back contents protected with CPRM (Content Protection for Recordable Media).

Playable only for DDX7049BT/DDX4049BT/DDX3049.

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

/MPEG1/MPEG2

16 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Playback operations

To display the source control screen, ☞ page 14 .

For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG

Media type

• DVD Video: Title no./Chapter no.

• DVD-VR: Program no. (or Playlist no.)/Chapter no.*

• DivX/MPEG1/MPEG2: Folder no./Track no.

• JPEG: Folder no./File no.

• VCD: Track no.

[ ]

[

[3 8]

[7]* [4] [¢]

Selects playback mode. (☞page20)

Starts/Pauses playback.

Stops playback.

• Selects chapter/track.

• Reverse/forward

• For DivX/MPEG1/MPEG2/JPEG, the following buttons also appear:

[ ] [ ] Selects folder.

(Press)

search.*

(Hold)

File type (for DivX/MPEG1/MPEG2/JPEG)

Playback mode

[1] [¡]

[Mode]*

[MENU]

[ ]

Playing time

• Reverse/forward search during playback.*

• Plays back in slowmotion during pause.

Changes the settings for disc playback. (☞page21)

Displays <Top Menu> screen.

Displays folder/track list. (☞page18)

To display the Original Program/Playlist screen, ☞page19.

Does not appear for DVD/DVD-VR/JPEG.

Appears only for DVD/DVD-VR/VCD.

Search speed varies depending on the type of disc or file.

Does not appear for VCD.

English 17

To display the source control screen, ☞ page 14 .

For CD/MP3/WMA/WAV/AAC

Track/file information

• Pressing [<] scrolls the text if not all of the text is shown.

Media type

File type

Playback mode

While playing, the jacket picture is shown if the file has the tag data including the jacket picture.

[ ] [ ]

[

] *

[3 8] Starts/Pauses playback.

] [ ] *1Selects folder.

[

Does not appear for CD.

Search speed varies depending on the type of disc or file.

Selects playback mode. (☞page20)

Displays folder/track list. (☞below)

Playing time

Playback status (3: play / 8: pause )

• MP3/WMA/WAV/AAC:

Folder no./Track no.

• CD: Track no.

[4] [¢] Selects track. [1] [¡] Reverse/forward search.*

[Mode] *

Changes the settings for disc playback. (☞page21)

[MENU] Displays <Top Menu>

screen.

Selecting folder/track on the list

Changes the page

Returns to the upper layer

18 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Plays tracks/files in the folder

Returns to the root folder

Playing Recordable/Rewritable discs

• This unit can recognize a total of 5000 files and 250 folders (a maximum of 999 files per folder).

• Use only “finalized” discs.

• This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

• Some discs or files may not be played back due to their characteristics or recording conditions.

Video menu operations

You can display the video menu screen while watching the playback pictures on the screen.

• Available items on the screen differ depending on the types of the loaded disc and playback files.

• The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.

• The screen for MPEG1/MPEG2 differs from the above.

[Audio] Selects the audio type.

[Subtitle] Selects the subtitle type.

[Angle] Selects view angle.

[MENU] Displays the disc menu

[T MENU] Displays the disc menu

[CUR] Displays the menu/playlist/

[Highlight] Switches to the direct menu

[Picture Adjust]

[Aspect]

[ZOOM] Displays the picture size

• For DVD-VR: Selects the audio channel (ST: stereo, L: left, R: right).

(DVD)/playlist (DVD-VR).

(DVD)/original program (DVD-VR).

original program item selecting screen.

• [5] [∞] [2] [3]: Selects an item. – For DivX only

[2] [3]: Skips back or forward by about 5 minutes.

• [ENTER]: Confirms the selection.

• [RETURN]: Returns to the previous screen.

selection mode. Press the target item to select.

Displays picture adjustment screen. (☞ page 45)

Selects aspect ratio. (☞ page 46)

selecting screen. (☞ page 46)

English 19

Only for VCD

Direct selecting buttons (☞ below)

[Audio] Selects the audio channel (ST:

[Return] Displays the previous screen

[MENU] Displays the disc menu.

[Picture Adjust]

[Aspect]

[ZOOM] Displays the picture size

[Direct] Displays/hides the direct

• To select a track directly

– To switch between chapter/track entry

and title/folder entry, press [Direct/CLR].

– When you enter a wrong number, press

[Direct/CLR] to delete the last entry.

stereo, L: left, R: right).

or the menu.

Displays picture adjustment screen. (☞ page 45)

Selects aspect ratio. (☞ page 46)

selecting screen. (☞ page 46)

selecting buttons. (☞ below)

• To deactivate the PBC function, press [7]

then the direct selecting buttons to select a track number.

Selecting playback mode

For DVD/DVD-VR

Selects Repeat playback mode

For VCD (without PBC)/CD/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC

Selects Random

playback mode*

* You cannot activate the repeat mode and the

random mode at the same time.

• Each time you press the button, the playback mode changes. (The corresponding indicator lights up.) – Available items differ depending on the

types of loaded disc and playback file.

Indicator Playback mode

C-REP Repeats current chapter.

T-REP Repeats current title/

program.

REP Repeats current track.

FO-REP Repeats all tracks of the

current folder.

RDM Randomly plays all tracks.

FO-RDM Randomly plays all tracks of

current folder, then tracks of next folders.

To cancel, press the button repeatedly until the indicator disappears.

Selects Repeat

playback mode*

20 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

Settings for disc playback

Disc Setup items Selectable setting/item Initial: Underlined

Menu Language

Subtitle Language

Audio Language

Down Mix When playing back a multi-channel disc, this setting affects the

For DVD/DVD-VR

Dynamic Range Control

Screen Ratio Select the monitor type to watch a wide screen picture on the

For discs

except VCD/CD

File Type Select the playback file type when a disc contains different types of

For discs containing

audio/video/picture files

Select the initial disc menu language; Initial English (☞ page 70).

Select the initial subtitle language or erase the subtitle (OFF); Initial English (☞ page 70).

• Initial for DDX7049BT/DDX4049BT/DDX3049: English, for DDX719/ DDX419/DDX319: OFF

Select the initial audio language; Initial English (☞ page 70).

signals reproduced through the front and/or rear speakers.

♦ Dolby

Surround

♦ Stereo : Normally select this.

You can change the dynamic range while playing Dolby Digital software.

♦ Wide : Select this to enjoy a powerful sound at a low

♦ Normal : Select this to reduce the dynamic range a

♦ Dialog : Select this to reproduce the movie dialog

external monitor.

♦ 16:9 ♦ 4:3 LB (Letterbox) ♦ 4:3 PS (PanScan)

files.

♦ Audio ♦ Still Image ♦ Video ♦ Audio&Video

• For playable file types, ☞ page 16.

• If the disc contains no files of the selected type, the existing files are played in the following order: audio, video, then still image.

: Select this to enjoy multi-channel surround

audio with Dolby Surround.

volume level with its full dynamic range.

little.

more clearly.

: Plays back audio files. : Plays back JPEG files. : Plays back DivX/MPEG1/MPEG2 files. : Plays back audio files and DivX/MPEG1/MPEG2

files.

English 21

USB operations

Playing a USB device

• This unit can play JPEG/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC files stored in a USB mass storage class device.

• This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).

• Make sure all important data has been backed up to avoid losing the data.

Connecting a USB device

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit.

• You cannot connect a computer or portable HDD to the USB input terminal.

• To connect a USB device,

When a USB device is connected...

The source changes to “ starts.

• All tracks in the USB device will be played repeatedly until you change the source.

To disconnect the USB device safely

Press [0], then disconnect the USB device after “No Device” appears.

☞

page 79 .

USB

” and playback

Cautions:

• This unit may not play back files in a USB device properly when using a USB extension cord.

• USB devices equipped with special functions such as data security functions cannot be used with the unit.

• Do not use a USB device with 2 or more partitions.

• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.

• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.

• This unit may not recognize a memory card inserted into the USB card reader.

• When connecting with a USB cable, use the USB 2.0 cable.

• The maximum number of characters for:

– Folder names : 50 characters – File names : 50 characters

• Avoid using the USB device if it might effect driving safety.

• Do not pull out and connect the USB device repeatedly while “Reading...” is shown on the screen.

• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.

• Operation and power supply may not work as intended for some USB devices.

• Do not leave a USB device in the car, or expose to direct sunlight or high temperature to avoid deformation or damage to the device.

22 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

To display the source control screen, ☞ page 14 .

While playing, the

jacket picture is shown if the file has the tag data

including the jacket

picture.

Track/file information (for MP3/WMA/WAV/ AAC)

• Pressing [<] scrolls the text if not all of the text is shown.

Playing time Playback status (3: play / 8: pause )

Playback mode

[ ]

Selects repeat playback mode.

• REP: Repeats current track.

• FO-REP: Repeats all tracks of the current folder.

Selects random playback mode.

[

]

• RDM: Randomly plays all tracks.

• FO-RDM: Randomly plays all tracks of the folder.

[0] Press this button before

disconnecting. (☞ page 22)

File type

*1*

• MP3/WMA/WAV/AAC: Folder no./Track no.

• JPEG: Folder no./File no.

[ ]

Displays folder/track list. (☞ page 18)

[3 8] Starts/Pauses playback. [4] [¢] Selects track.

[1] [¡] Reverse/forward search.*

[ ] [ ] Selects folder.

[Mode] Changes the settings for

file playback. (☞below)

[MENU] Displays <Top Menu>

screen.

• Available items differ depending on the types of playback file.

To cancel random or repeat mode, press the button repeatedly until the indicator disappears.

You cannot activate the repeat mode and the random mode at the same time.

Search speed varies depending on the type of disc or file.

Setting <Screen Ratio>

Select the monitor type to watch a wide screen picture on the external monitor.

16:9

Setting <File Type>

Audio Plays back audio files.

Still Image Plays back JPEG files.

Video Plays back DivX/MPEG1/

MPEG2 files.

4:3 LB

(Letterbox)

4:3 PS

(PanScan)

Audio&Video Plays back audio files and

DivX/MPEG1/MPEG2 files.

• If the USB device contains no files of the selected type, the existing files are played in the following order: audio, video, then still image.

Setting <Drive Select>

Press [Next] to switch to another USB device when multiple USB devices are connected via a USB hub or the like.

English 23

Listening to the iPod/iPhone device

Preparation

• Connect iPod/iPhone. (☞ page 79 )

• Use the following cables: –

To watch the video and to listen to the music (analog): USB Audio and Video

cable for iPod/iPhone—KCA-iP22F/ iP202

(optional accessory)

– To listen to the music (digital): USB

Audio cable for iPod/iPhone—KCA-iP102 (optional accessory)

• Do not use extension cables.

iPod/iPhone that can be connected to this unit: Made for – iPod with video – iPod classic – iPod nano (6th Generation) – iPod nano (5th Generation) – iPod nano (4th Generation) – iPod nano (3rd Generation) – iPod nano (2nd Generation) – iPod nano (1st Generation) – iPod touch (4th Generation) – iPod touch (3rd Generation) – iPod touch (2nd Generation) – iPod touch (1st Generation) – iPhone 4 – iPhone 3GS – iPhone 3G – iPhone

KCA-

Settings for iPod playback

When the source is “

iPod

”...

Audiobooks Selects the speed of

Artwork Shows/hides the iPod

Setting <AV Input>

You can change the setting only when the unit is in standby.

audio books.

artwork.

1 On <Top Menu>:

24 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

iPod/iPhone playback operations

To display the source control screen, ☞ page 14 .

• Select “

• The operations explained in this manual are under the condition when the unit is selected

* *

iPod

” as the source. (☞ page 13 )

for controlling playback. (☞ below)

While playing, Artwork (the picture displayed on the screen of iPod/iPhone) is shown if the song contains the

Artwork.*

Playback mode

[MENU] Displays <Top Menu> screen. [Mode] Changes the settings for iPod

playback. (☞ page 24)

[38] Starts/Pauses playback.

] Selects Repeat playback

[

mode. *

• REP: Functions the same as “Repeat One.”

[

Selects Random playback

]

mode. *

• RDM: Functions the same as “Shuffle Songs.”

• A-RDM: Functions the same as “Shuffle Albums.”

For changing the Artwork display setting, ☞ page 24.

To cancel random or repeat mode, press the button repeatedly until the indicator disappears. Not available in iPod control mode. (

You cannot resume playback for video sources.

When using iPod nano (1st Generation) or iPod with video, you can control playback only from the unit.

☞ page 26)

Song/video information

• Pressing [<] scrolls the text if not all of the text is shown.

Playing time

Playback status (3: play / 8: pause )

[ ]

[4]

Displays the Music/Video menu on the iPod/iPhone. (☞ page 26) Selects a track/video.*

[¢] [1]

Reverse/forward search.

[¡] [APP] Select iPod to play back using

iPod/iPhone—iPod control

mode.*

(☞ page 26)

• When you turn on this unit, the iPod/ iPhone is charged through the unit.

• The text information may not be displayed correctly.

• For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or is slow, reset your iPod/iPhone.

• For the latest compatible list and software version of iPod/iPhone, see:

www.kenwood.com/cs/ce/ipod

English 25

Selecting a track/video from menu on the iPod/iPhone

2 Select the menu (Music or

Video) (1), a category (2), then a desired item (3).

• Select the item in the selected layer until a desired track starts playing.

Music menu:

Switches between Music ( ) and

Video (

Returns to the previous layer

Returns to the top layer

Video menu:

Switches between Music ( ) and

Video (

Operating in iPod/iPhone control mode

You can play back the audio/video using iPod/iPhone itself instead of the unit.

Audio:

Video:

)

• When you are using Garmin StreetPilot® Onboard, the screen appears. For Garmin StreetPilot® Onboard for iPhone, visit the Garmin web site: www.garmin.com

Garmin App:

)

• The current position of your vehicle appears on the map. When the vehicle runs, the map scrolls.

• Available categories differ depending on the type of your iPod/iPhone.

26 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

• The screens of the iPhone and unit are not the same.

• To return to the normal mode, press [APP].

PANDORA® operations

(Only for DDX719/DDX419/DDX319)

• You can operate PANDORA using the remote controller. Only playing, pausing, and skipping are available.

• Install the latest version of the PANDORA® application on your iPhone.

The picture data

is displayed if

available from the

current content.

Song information

• Pressing [<] scrolls the text if not all of the text is shown.

Playing time Playback status (3: play / 8: pause )

[ ]

[

]

Displays the Stations list. (☞ below)

Thumbs down to the current song and skips to the next song.

[38] Starts/Pauses playback.

Selecting a station from the Stations list

Press the name of a station you want to listen to.

[¢] Skips the current song.

• Not available when the PANDORA skip limitation is exceeded.

[

]

[

Registers the current song as favorite.

Bookmarks the artist.

]

Bookmarks the current song.

]

[Quick Mix] Plays all the songs in the

registered stations randomly.

[By Date] Sorts the list in reverse

chronological order.

[By Name] Sorts the list in alphabetical

order.

• The letter selection screen appears. Select a letter, and the stations with the selected letter as their initial come to the top.

English 27

About Pandora® internet radio

The requirements for listening to Pandora are as follows:

• Use an Apple iPhone or iPod touch running under iOS3 or later.

• Search for “Pandora” in the Apple iTunes App Store to find and install the most current version of the Pandora® application on your device.

• In the application on your device, log in and create an account with Pandora. (If you are not already a registered user, an account can also be created at www. pandora.com.)

• Internet connection by 3G, EDGE, or WiFi.

• iPhone connected to this unit with a KCAiP22F/KCA-iP202.

• Pandora® is available only in the U.S.

• Because Pandora® is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

• Some functions of Pandora® cannot be operated from this unit.

• For issues using the application, please contact Pandora at pandora-support@ pandora.com

28 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049

+ 64 hidden pages