Kenwood CAW-1142-02 User Manual

2-DIN CAW-1142-02

Installation manual for:

Hyundai Tucson

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
* 2X Cushion

Use this hole

Use this hole

Kenwood DDX6029

We advice to use the following positions.
Other positions are also possible.

Use position 1 marked with a cross.
Use position 6 & 8 marked with an arrow.
Measured from left to right.

Kenwood DDX 7025

We advice to use the following positions.
Other positions are also possible.

Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.

* Mount the plates.

2-DIN CAW-1142-02

2-DIN 12.301142-02

12

Use a plastic wig te remove the panel
surrounding the gear lever.

Remove the screws at the location of the
arrows. Remove the metal ring.

34

Gently remove the silver trim. This is
tighten by a click system

Place the metal bracket and tighten the
four screws. Remove the orginal bracket
which is indicated at the middle arrows

You need to order one of the below mentioned

5

Place the headunit

panels. This can be ordered at the Hyundai dealer.

Order this panel when to car is
equipped with a climatic control.
Article number: 847612E211X9

Order this panel when to car is
equipped with a manual airco.
Article number: 847612e201x9

Connect all of the needed wiring harnesses and check all the connections carefully.