Kenwood BL440 series User Manual
to use your blender
1 Fit the sealing ring into the blade
unit.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then
turn.
5 Screw the lid onto the jug so that
the thumb tab is over the handle.
(To unscrew the lid, push the
thumb tab .)
6 Place the blender onto the power
unit and turn to lock .
7 Select a speed.
●
Use speed 1 for lighter blending
eg. batters, milkshakes and
scrambled eggs.
●
Use speed 2 for soups, sauces,
pâtés and mayonnaise.
OR
●
Use the pulse control to operate
the motor in a start/stop action.
The pulse control operates the
motor and keeps it running for as
long as the lever is held down -
this will allow you to control the
texture of various foods eg. pâtés.
Important
blender and mill
●
To ensure long life of your blender,
never run it for longer than 60
seconds or the mill for longer than
30. Switch off as soon as you’ve
got the right consistency.
●
Don’t process spices – they may
damage the plastic.
●
The machine won’t work if the
blender or mill is fitted incorrectly.
blender only
●
Don’t put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with the
machine running, drop them
through one by one. Keep your
hand over the opening. Empty
regularly.
●
Don’t use the blender as a storage
container. Keep it empty before
and after use.
●
Never blend more than 11⁄2 litres
(2 pts 12 fl.oz) – less for frothy
liquids like milk shakes.
mill only
Use for dry ingredients only.
hints
●
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Then, with the
machine running, pour the oil into
the filler cap and let it run through.
●
Thick mixtures, eg pâtés and dips,
may need scraping down. If it’s
difficult to process, add more
liquid.
●
When crushing ice, add 15ml
(1 tbsp) water to 6 ice cubes.
Operate the blender in short
bursts.
to use your mill
1 Put your ingredients into the jar. Fill
it no more than half full.
2 Fit the sealing ring into the blade
unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the blade unit onto the jar
until it’s finger-tight.
5 Place the mill onto the power unit
and turn to lock.
6 Select a speed or use the pulse
control.
7 After milling, you can replace the
blade unit with the sprinkler lid and
shake out your food.
●
The sprinkler lid is not airtight.
Use your blender for soups,
sauces, drinks, pâtés, mayonnaise,
dressings etc. Use your mill (if
supplied) for milling herbs, nuts
and coffee beans.
safety
●
CAUTION: Blending very hot
liquids may result in hot
liquid and steam being
forced suddenly past the lid
or filler cap. Allow the liquid
to cool or reduce the
quantity and select a lower
speed if available. Protect
your hands with a cloth or
oven gloves when handling
the hot goblet and lid.
●
Switch off and unplug:
●●
before fitting or removing parts
●●
after use
●●
before cleaning.
●
Keep hands and utensils out of the
blender when it’s on the power
unit.
●
Don’t touch the sharp blades.
●
Don’t let children or infirm people
use the machine unsupervised.
●
Never use a damaged machine.
Get it checked or repaired: see
‘service’.
●
Never use an unauthorised
attachment.
●
Never leave the machine on
unattended.
●
Don’t let children play with the
machine.
●
When removing the blender or mill
from the power unit:
●●
wait until the blades have
completely stopped;
●●
don’t accidentally unscrew the
jug or jar from the blade unit.
●
Only use the machine for its
intended domestic use.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
Important – UK only
●
The wires in the cord are coloured
as follows:
Blue = Neutral, Brown = Live.
●
The appliance must be protected
by a 3A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable pug is inadvertently
inserted into a 13A socket outlet.
●
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first
time
1 Remove all packaging.
2 Wash the parts: see ‘cleaning’.
key
blender
filler cap
lid
jug
sealing ring
blade unit
pulse control
speed control
power unit
cord storage
mill (if supplied)
blade unit
sealing ring
jar
sprinkler lid
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwood.co.uk
2203/2
BL430 series
BL440 series
cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never let the power unit, cord or
plug get wet.
●
Empty the jug before unscrewing it
from the blade unit.
●
Don’t wash any parts in your
dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Push excess cord inside the back
of the machine.
blade unit
1 Remove and wash the sealing
ring.
2 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the blade
unit in water.
3 Leave to dry upside down, away
from children.
other parts
Wash by hand, then dry.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised
Kenwood repairer.
UK
If you need help with:
●
using your machine or
●
servicing, spare parts or repairs (in
or out of guarantee)
call Kenwood customer care on
023 9239 2333. Have your
model number ready - it is
located on the underside of the
power unit.
●
spares and attachments
call 0870 2413653.
●
other countries
Contact the shop where you
bought your machine.
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge
provided:
●
you have not misused, neglected
or damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used
commercially;
●
you have not fitted a plug
incorrectly; and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect
your statutory rights.
winter warmer soup
carrots, potatoes and onions:
thirty 2cm (
3
⁄4") cubes of each
bacon stock
150g (6oz) red lentils, washed
375ml (
3
⁄4pt) vegetable stock
one and a half 400g (14oz) tins
chopped tomatoes
salt and pepper
300g (12oz) cooked bacon joint
cut into 1cm (
1
⁄4") cubes
1 Put the carrots, potatoes and
onions into the blender in that
order.
2 Add bacon stock up to the 1
1
⁄2 litre
mark.
3 Blend for no more than 10
seconds.
4 Pour into a saucepan. Then add
the lentils, tomatoes, vegetable
stock and seasoning.
5 Bring to the boil, stirring
constantly. Then simmer for about
1 hour, stirring regularly, until the
ingredients are cooked.
6 Add the bacon cubes and heat
through for 5-10 minutes. Serve
immediately.
Loading...