Page 1
BL370 series
BL380 series
Page 2
Page 3
Page 4
before using your Kenwood
ppliance
a
●
ead these instructions carefully and
R
retain for future reference.
●
emove all packaging and any
R
abels.
l
●
Wash the parts: see ‘care and
cleaning’.
safety
●
Switch off and unplug:
●
●
before fitting or removing parts;
●●
when not in use;
●●
before cleaning.
●
Never fit the blade unit to the
power unit without the
blender goblet or mill jar
fitted.
●
Always unplug the appliance before
putting your hands or utensils in the
goblet.
●
Always take care when handling the
blade assembly and avoid touching
the cutting edge of the blades when
cleaning.
●
Only operate the blender with the lid
in place.
●
Only use the goblet with the blade
assembly supplied.
●
Never let the power unit, cord or
plug get wet.
●
Never use a damaged appliance.
Get it checked or repaired: see
‘service and customer care’.
●
Never use an unauthorised
attachment.
●
Liquids should be allowed to cool to
room temperature before blending.
●
Never leave the appliance
unattended when it is operating.
●
When removing the blender or mill
from the power unit:
●●
wait until the blades have
completely stopped;
●●
don’t accidentally unscrew the
goblet or mill jar from the blade
assembly.
●
Never run the blender empty.
●
Never blend more than the
maximum capacity stated in the
recommended speed chart.
●
o ensure long life of your blender
T
nd mills, do not run for longer than
a
60 seconds.
●
Smoothie recipes - never blend
frozen ingredients that have formed
a solid mass during freezing, break it
up before adding to the goblet.
●
Don’t use the blender as a storage
container. Keep it empty before and
after use.
●
Always use the blender on a secure,
dry level surface.
●
Never place this appliance on or
near a hot gas or electric burner or
where it could touch a heated
appliance.
●
Misuse of your blender can result in
injury.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
Children should be supervised to
ensure that they do not play with the
appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
2
Page 5
before plugging in
●
ake sure your electricity supply is
M
he same as the one shown on the
t
underside of the appliance.
Important - UK only
●
he wires in the cord are coloured
T
as follows:
Blue = Neutral
Brown = Live.
●
The appliance must be protected by
a 3A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
blender
filler cap
locking lid
goblet
blender sealing ring
blender blade unit
power unit
speed + pulse control
cord storage
multi mill (if supplied)
blender sealing ring
blender blade assembly
multi mill jar
grinding mill (if supplied)
mill jar
grinding mill blade assembly
grating mill (if supplied)
mill jar
grating mill blade assembly
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring into
the blender blade unit - ensuring
the seal is located correctly in the
grooved area.
●
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet - ensuring the blade
assembly is fully tightened
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a “click”
●
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
. Refer
.
3
Page 6
blender hints
●
o blend dry ingredients - cut into
T
ieces, remove the filler cap, then
p
with the machine running, drop the
ieces down one by one. Keep your
p
and over the opening. For best
h
results empty regularly.
●
The processing of spices is not
recommended as they may damage
the plastic parts.
●
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole in
the lid.
●
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
blender recommended speed chart
speed usage/food items max. quantity
to use your multi mill
(if supplied)
Use your multi mill for milling herbs,
uts, coffee beans and purees.
n
Put your ingredients into the jar .
1
Fill it no more than half full.
2 Fit the blender sealing ring into
the blender blade unit - ensuring
the seal is located correctly in the
grooved area.
●
Ensure that the seal is fitted
correctly.
3 Turn the blade unit
Lower it into the jar, blades down
Turn anti-clockwise to lock.
4 Place the mill onto the power unit
and lock by turning clockwise until
you hear a “click”
5 Select a speed or use the pulse
control.
upside down.
.
1 Frothing milk 800 ml
Light mixes e.g. batters, milkshakes,
scrambled egg 800 ml
2 Soups & drinks 1.2 litres
Thicker mixes e.g. pâtés
Mayonnaise 3 eggs + 450ml
Smoothie drinks
Place the fresh fruit and liquid ingredients in 800ml
first (includes yoghurt, milk and fruit juices) liquid
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
Operates the motor in a start/stop action.
oil
(P) The pulse will operate for as long as it is held in –
pulse position.
Ice crushing - operate in short bursts until 6 cubes
crushed to the desired consistency.
.
43
Page 7
to use your grinding mill
(if supplied)
uitable for grinding spices, coffee
S
beans and processing ginger, garlic
and chillies.
1 Place your ingredients into the blade
assembly
2 Fit the jar
to lock
3 Place the mill onto the power unit
and lock by turning clockwise until
you hear a “click”
4 Select a speed or use the pulse (P)
control.
ingredients mill max qty speed operating
Herbs - best chopped Multi 15g 2 5 – 10 secs
when clean and dry
Nuts Multi or Grinding 50g 2 10 – 15 secs
Coffee Beans Multi or Grinding 50g 2 30 secs
Baby Foods & Purees Multi 50g 2 30 secs
Spices – such as black Grinding 50g 2 30 – 60 secs
peppercorns, cardamom
seeds, cumin seeds,
coriander seeds, fennel
seeds, whole cloves etc.
Chillies Grinding 30g 2 10 secs
Fresh Root Ginger Grinding 30g 2 10 secs
Garlic Grinding 4 cloves 2 10 secs
Parmesan Cheese – cut Grating 60g 2 10secs
into 1cm cubes
Dried Fruit Grating 50g 2 10 secs
Coconut Grating 50g 2 20 secs
Nutmeg Grating 2240 secs
hints
●
For optimum performance when
processing spices we recommend
that you do not process more than
50g at a time in the mill.
●
Whole spices retain their flavour for a
much longer time than ground
spices so it is best to grind a small
quantity fresh at a time to retain the
flavour.
.
and turn anti-clockwise
.
.
mill recommended speed chart
to use your grating mill
(if supplied)
uitable for grating parmesan
S
cheese, nutmeg, coconut and dried
fruit.
1 Place your ingredients into the blade
assembly
2 Fit the jar
to lock
3 Place the mill onto the power unit
and lock by turning clockwise until
you hear a “click”
4 Select a speed or use the pulse (P)
control.
●
To release the maximum flavour and
essential oils whole spices are best
roasted prior to milling.
.
and turn anti-clockwise
.
.
time
5
Page 8
care and cleaning
●
Always switch off, unplug and
ismantle before cleaning.
d
●
Empty the goblet before unscrewing
it from the blade unit.
●
Don’t immerse the blade unit in
water.
●
Do not place any parts in the
dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Don’t immerse the power unit in
water.
●
Store excess cord in the storage
area at the back of the power
unit
.
blade assemblies
blender and multi mill
●
Remove the blade unit from the
goblet or mill by turning to the
unlock position to release.
grinding and grating mills
●
Remove the blade unit from the jar
by turning in a clockwise direction.
1 blender/multi mill: remove and
wash the sealing ring.
2 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
3 Leave to dry upside down.
other parts
Wash by hand, then dry.
service and customer
care
●
If the cord is damaged it must, for
afety reasons, be replaced by
s
ENWOOD or an authorised
K
KENWOOD repairer.
UK
If you need help with:
●
using your appliance or
●
servicing, spare parts or repairs (in or
out of guarantee)
call Kenwood customer care on 023
9239 2333. Have your model
number (ie BL370) and date
code (4 digit code ie 10D13)
ready. They are on the underside of
the power unit.
●
spares and attachments
call 0870 2413653.
●
other countries
Contact the shop where you bought
your appliance.
●
Designed and engineered by
Kenwood in the UK.
●
Made in China.
65
Page 9
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
carrot and coriander
soup
25g butter
50g onion chopped
1 clove garlic crushed
480g carrot cut into 1
cold chicken stock
10-15ml (2-3tsp) ground coriander
salt and pepper
1 Melt the butter in a pan, add the
onion and garlic and fry until soft.
2 Place the carrot into the liquidiser,
add the onion and garlic. Add
sufficient stock to reach the 1.2 L
level marked on the goblet. Fit the
lid and filler cap.
3 Blend on maximum speed for 5
seconds for a coarse soup or longer
for a finer result.
4 Transfer the mixture to a saucepan,
add the coriander and seasoning
and simmer the soup for 30 to 35
minutes or until cooked.
5 Adjust the seasoning as necessary
and add extra liquid if required.
1
⁄2 cm cubes
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
●
you have not misused, neglected or
damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used commercially;
●
you have not fitted a plug
incorrectly; and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
7
Page 10
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China
40427/1
Loading...