Kenmore Elite 30'' Specifications
Kenmore Elite 30-Inch Sealed Gas Downdraft Cooktop
GAS COOKTOP INSTALLATION INSTRUCTIONS
30"
26
13
/16"
30"
26
13
/16"
21
13
/32"
17
13
/16"
3
11
/16"
18
15
/16"
Stainless 22-31113
• Downdraft ventilation with 525 CFM 3-speed fan
• Stainless surface with recessed, frameless design
• One 18,200 BTU Turbo Boil™ power burner
• One 12,000 BTU power burner
• One 9,500 BTU all-purpose burner
• One 5,000 BTU simmer burner
• Porcelain-coated cast-iron, dishwasher-safe, continuous grates
• Cast metal knobs
• Electronic Ignition
• Convertible to LP (Kit Included)
• NOT approved for use with undercounter wall ovens
22-31113
Page 1 of 1
SELECTION ELITE
Stainless 22-31113
COOKTOP FEATURES
Burner Type Sealed
Downdraft Ventilation •
Ventilation Fan 3-Speed (525 CFM)
Power Burner (BTU)
All-Purpose Burner (BTU) 1 @ 9,500
Simmer Burner (BTU) 1 @ 5,000
Simmer Burner Location Right Rear
Grate Styling Continuous, Matte Finish
Grate Material
Dishwasher-Safe Grates •
Cast Metal Knobs •
Cooktop Surface
Recessed Design
Frameless Design •
Valves (Degrees of Turn) 270
GENERAL FEATURES
Electronic Ignition •
Convertible to LP* Kit Included
Item Weight (Approx. Lbs.) 83
Shipping Weight (Approx. Lbs.) 89
WARRANTY
1-Year Limited Warranty –
Entire Appliance Parts & Labor
2–5-Years Limited Warranty –
Glass Cooktop, Cooktop Elements Parts
If used for other than private family purposes, warranty applies for only 90 days.
*LP orifices included; conversion must be done by qualified LP installer
1 @ 18,200 with Turbo Boil
1 @ 12,000
Porcelain-Coated
Cast-Iron
Stainless Steel
•
™
Model 22-31113
Overall Stainless
Knobs Stainless
Surface Stainless
Grates Black Matte
Trim —
Drip Pans —
NOTE: It is not recommended to use drawer underneath cooktop. Empty space is needed for installation purpose.
10511
30"
13
/16"
26
Due to Sears policy of continuous improve ment on its products, Sears
reserves the right to change materials and specifications without notice.
Before installing, consult installation instructions packed with product
for current dimensional and installation data.
13
21
/32"
11
/16"
3
1
20
51.1 cm
/8"
3
23
/8"
13
17
/16"
1 ⅜" Minimum Flat Distance
from Cutout Edge.
28"
19
1
/8"
9"
9"
15
18
/16"
24" Min.
1 ⅜" Minimum Flat Distance
from Cutout Edge.
22-31113.PDF
Effective 12/19/11
Loading...