Keating Of Chicago 20 AA Gas User Manual
20 AA GAS
The 20 AA Fryer requires no electrical connections and is
ideal for use in remote locations. The 20 AA allows you to
cook up to 140 lbs. of frozen french fries or 200 lbs. of
chicken per hour with an input of 134,000 BTU.
KEATING SAVES OIL COSTS IN THREE WAYS:
BETTER FRY POT DESIGN
LARGER COLD ZONE
INSTANT RECOVERY
®
1. You shouldn't have to wait on the fryer. A properly
designed fry pot ensures that the fryer has recovered its
temperature before the end of the cooking cycle. Keating
“INSTANT RECOVERY”® means continuous
performance.
2. The Keating frying vessel is 27% Cold Zone, the food
particles collected in the cold zone are unheated and
therefore do not carbonize and contribute to premature
shortening breakdown.
3. Keating’s INSTANT RECOVERY® feature means
frying at lower temperatures (325° - 335°F) extending
oil life while enhancing product quality.
“Serving Those Who Serve The Very Best”
®
EASY TO CLEAN
Keating uses only 304 stainless steel in its frying vessel
design and polishes each vessel. The smoother the surface,
the less carbon build-up occurs, making cleaning easier. A
full 1-1/4" front drain allows easy draining of oil.
SAFETY CONTROLS ENSURE SAFE AND
ACCURATE COOKING
The patented and precise thermostat controls cooking
temperatures to ± 3°F. Hi-Limit control protects against
the oil and fryer overheating.
Each fryer goes through a rigorous 100% test before
shipping with every component carefully checked. The
actual temperature test chart is included with each fryer.
SPECIAL ORDER OPTIONS
Keating gives you the widest range of options to ensure
your fryer is exactly suited to your needs.
INSTANT RECOVERY
®
FRYER
20 AA GAS
134,000 BTU input for cooking up to
140 lbs. of frozen french fries per hour
Instant Recovery®Fryer now even
more efficient using less energy with
our newly patented Wing Turbulators
®
Stainless Steel cabinet
Polished Stainless Steel fryer vessel
Cold Zone 27% of fryer vessel
No electrical connections required
Save on oil costs/cooks at lower
temperatures
Casters Optional
20 AA GAS
KEATING OF CHICAGO, INC.
Toll Free 1-800-KEATING
www.keatingofchicago.com
As continuous product improvement occurs, specifications may be changed without notice.
INSTANT RECOVERY
®
FRYER
20 AA GAS
Printed in U.S.A. 20AA2007 7/07
Oil BTU Ship
Model No. and Description Capacity Input Height Depth Width Wt.
20 AA Nat Gas 100 lbs. 134,000 46
1
/2" 341/2"21
3
/8" 230 lbs.
20 AA LP Gas 100 lbs. 132,000 46
1
/2" 341/2"21
3
/8" 230 lbs.
20 Safe & Easy - - 46
1
/
2" 38
5
/
8"21
3
/
8"-
the panel shall be a canopy. The door shall be the full
width of the cabinet. No additional space is required for
the door to open a full 90 degrees. A stainless steel flue
deflector is to be provided for installing onto flue back.
Heat Transfer Tubes to be four, made of stainless steel
polished to a #7 mirror finish.
Thermostat shall be close range, hydraulic type and be
accurate to ±3°F from 300° to 350°F with stainless steel
bulb. Application of this thermostat is patented by
Keating.
Hi-Limit Control shall be manually resettable type with
stainless steel bulb.
100% Safety Shut Off shall be millivolt type with
combination control gas valve and thermopile.
Standard Accessories to include one pair 4 mesh baskets,
grid screen over heat transfer tubes, drain clean out rod
and sample of Keating Klenzer and Sea Powder.
Electrical Requirements are not necessary on AA
models.
Gas Requirements to install are
3
/4" male NPT connection
and 4" water column pressures natural and 10" for LP gas
at the fryer burner manifold. Supply pressure to fryers
must be 7" (natural gas) and 11” (LP) water column.
Special Order Options may include battery, common
manifold, rear drain, casters, covers, full or triple size
baskets, thermostat seals, portable filter, central filter
(CF20SE or above), Safe & Easy® filter.
DESCRIPTION
The Keating Instant Recovery® 20 AA Fryer consists of a
frying vessel 20" sq., having a splash deck and a splash
back installed in a cabinet equipped with gas burners and
an automatic temperature control mechanism, all arranged
and designed for the proper frying of food.
SPECIFICATIONS
Frying Vessel: shall be constructed from 18 gauge
stainless steel, shall have a shortening capacity of 100
pounds, shall be equipped with four 18 gauge
horizontal heat transfer tubes spaced above the bottom
of the vessel so that the bottom is unheated and the
food particles collecting in this bottom zone are
unheated and therefore do not carbonize. The frying
vessel shall be polished to inhibit carbon build-up and
facilitate easy clean-up. The heat transfer tubes shall be
3" wide and 5" high. The bottom of the vessel shall slope
toward the front where it shall be equipped with a
11/4"
Teflon core
1
/4 turn, drain valve, so arranged that the
shortening can be drained into a receiving vessel placed in
front of the fryer.
Splashdeck shall slope toward the shortening containing
vessel. The splash deck shall be made of 16 gauge 304
stainless steel.
Splashback shall be made of 18 gauge 304 stainless
steel, shall completely cover the sides of the flue.
Cabinet: shall be made of 18 gauge stainless steel. The
cabinet shall be rigid in construction and shall have
four 8" adjustable legs. A door made of 22 gauge 304
stainless steel shall cover the front of the cabinet and shall
extend from the bottom of the fryer to the panel, and above
Loading...