Kawasaki NINJA 650R ABS User Manual
ABS 2011
Specications:
EX650DBF
Engine Type 4-Stroke, Liquid Cooled, DOHC, 8-Valve, Twin Cylinder
Displacement 649.0 cm³
Bore & Stroke 83.0 x 60.0 mm
Compression Ratio 11.3:1
Max Torque 66.0 N-m @ 7,000 rpm
Fuel System DFI with Keihin 38mm Throttle Bodies (2)
Ignition TCBI with digital advance
Transmission 6-Speed Positive Neutral Finder
Rake/Trail 24.5°/ 102 mm
Front Wheel Travel 120 mm
Rear Wheel Travel 125 mm
Front Tire Size 120/70ZR17
Rear Tire Size 160/60ZR17
Front Suspension 41 mm Hydraulic Telescopic Fork
Rear Suspension Offset Laydown Single Shock, 5-Way Preload Spring
Wheelbase 1,410 mm
Front Brake
Rear Brake 220 mm Petal Disc & Single Piston Calliper with ABS
Fuel Tank Capacity 15.5 litres
Ground Clearance 140 mm
Seat Height 790 mm
Curb Mass 204.0 kg
Colours
(Specications subject to change without notice.) (Images for reference only)
Adjustment
Large 300 mm Petal Discs & Twin Piston Callipers with ABS
(includes full tank of fuel and all uids at correct levels)
KMT Metallic Spark Black (15Z) or KMT Candy Burnt Orange(15T)
Key Features:
649 cm³, DOHC, Liquid-Cooled Engine
Comprehensive Digial Meter
ABS Front and Rear Petal Disc Brakes
2011 Ninja 650R ABS
The Ninja 650RL ABS continues to offer a package that
is both fun and easy to ride with sensational Ninja
Supersport styling. The most apparent feature is the
Ninja 650RL ABS’s decidedly sporty appearance. Sharp,
owing styling gives the bike the look of a modern
supersport machine.
The 649 cm³, liquid cooled Parallel Twin is extremely
user-friendly. The easy-to-control engine is responsive
and smooth, especially at low-mid rpm.
Sportier, even easier to handle, safer thanks to the
addition of ABS and wrapped in seductive Ninja
supersport styling, the Ninja 650RL ABS enables riders to
experience the fundamental joy of motorcycling.
649 cm³ Twin Cylinder DOHC Engine
• Parallel twin engine is the most compact in its category
and helps reduce the dimensions of the entire
motorcycle to keep it small and nimble.
• Tuned to deliver smooth, responsive power in the
low- to mid-rpm range with a smooth roll-on response
for negotiating city trafc.
• Triangular crank and transmission shaft layout makes
the engine very short from front to back, a semi-dry
sump oil system reduces overall engine height, while the
narrow pitch of the chrome composite plated aluminium
cylinders helps reduce engine width.
• Mufer with 3-way catalyser and bullet-tip opening is
mounted below the engine to help lower the centre of
gravity and aid weight centralisation.
• 180-degree crankshaft plus balancer shaft for
extremely smooth engine operation.
• Oil jets in the connecting rod big ends spray oil on the
undersides of the pistons to aid cooling.
Liquid Cooling
• Wide radiator maximizes cooling capacity to help
maintain consistent engine temperatures for long engine
life and sustained power during hard use.
• Allows closer engine tolerances for more horsepower.
• Coolant is routed through the engine cases to reduce
external hoses.
• Includes a temperature gauge.
Digital Ignition
• Digital timing advance enhances power.
• Spark plug mounted “stick” ignition coils are compact
and help reduce weight.
Digital Fuel Injection
• 38mm Keihin throttle bodies feature sub-throttle valves
for optimum performance and rideability.
• The sub throttles, located behind the main throttle
valves, are controlled by the ECU so that the EFI system
has more precise throttle response, similar to a
constant-velocity carburettor.
• Precise fuel injection plus exhaust catalyser
signicantly reduce emissions.
• Automatic fast idle system makes starting and
warm-up easy.
6-Speed Transmission
• Cassette-style transmission puts the transmission
shafts and shift drum into a compact layout that is easily
removed as a single unit from the cases for easier
maintenance.
• Kawasaki Positive Neutral Finder just lift the gear lever
from rst when stopped and automatically select
neutral.
Trellis Frame
• High tensile steel trellis frame is small and light.
• Designed using 3-dimensional computer analysis to
achieve the optimum stiffness balance for better
handling.
• Narrow at the knees and feet for rider comfort and
control.
Single-shock Rear Suspension
• D-shaped swingarm and offset, lay down single rear
shock complement the frame design to create an
integrated line owing from the steering head to the rear
hub.
• Short, compact frame and engine design allows the
swingarm to be longer, which helps improve overall
handling.
Triple Petal Design Brake Discs with ABS
• Front brake callipers have big 27mm pistons for
excellent brake feel.
• Petal design offers improved cooling and warp
resistance.
• Same petal design found on the Ninja ZX-6R and
ZX–10R supersports machines.
• Front brake lever uses a ball-joint and revised pivot
location to deliver a smooth actuation of the master
cylinder piston.
• ABS function helps prevent wheel locking when braking
hard in a straight line.
Loading...