Ninja 1000 ABS 2015
Table of contents
Loading...
Quick Reference Guide
This Quick Reference Guide will
assist you in finding the information
you’re looking for.
A Table of Contents is included after
the Foreword.
SAFETY INFORMATION j
GENERAL INFORMATION j
HOW TO RIDE THE MOTORCYCLE j
MAINTENANCE AND ADJUSTMENT j
APPENDIX j
MAINTENANCE RECORD j
Whenever you see the symbols
shown below, heed their instructions!
Always follow safe operating and maintenance practices.
DANGER
DANGER indicates a hazardous
situation which, if not avoided,
will result in death or serious in-
jury.
WARNING
WARNING indicates a hazardous
situation which, if not avoided,
could result in death or serious
injury.
NOTICE
NOTICE is used to address prac-
tices not related to personal in-
jury.
NOTE
NOTE indicates information that may
○
help or guide you in the operation or
service of the vehicle.
NOTICE
THIS PRODUCT HAS BEEN
MANUFACTURED FOR US E IN A
REASONABLE AND PRUDENT
MANNER BY A QUALIFIED OPERATOR AND AS A VEHICLE
ONLY.
Foreword
Congratulations on your purchase of a new Kawasaki motorcycle. Your new motorcycle is the product of Kawasaki’s advanced engineering, exhaustive testing,
and continuous striving for superior reliability, safety and p e rfo rmance.
Please read this Owner ’s Manual carefully before riding so that you will be
thoroughly familiar with the proper operation of your motorcycle’s controls, its features, capabilities, and limitations. This manual offers many safe riding tips, but its
purpose is n ot to provide instruction in all the techniques and skills required to ride
a motorcycle safely. Kawasaki strongly recommends that all operators of this vehicle enroll in a motorcycle rider training program to attain awareness of the mental
and physical requirements necessary for safe motorcycle operation.
To ensure a long, trouble-free life for your motorcycle, give it the proper care and
maintenance described in this manual. For those who would like more detailed information on their Kawasaki Motorcycle, a Service Manual is available for purchase
from any authorized Kawasaki motorcycle dealer. The Service Manual contains detailed disassembly and maintenance information. Those who plan to do their own
work should, of course, be competent mechanics and possess the special tools
described in the Service Manual.
Keep this Owner’s Manual aboard your motorcycle at all times so that you can
refer to it whenever you need information.
This manual should be considered a permanent part of the motorcycle and should
remain with the motorcycle when it is sold.
All rights reserved. No part of this publication may be reproduced without our
prior written permission.
This publication includes the latest information available at the time of printing.
However, there may be minor differences be twee n the actual product and illustrations and text in this manual.
All products are subject to change without prior notice or obligation.
KAWASAKI HEAVY INDUSTRIES, LTD.
Motorcycle & Engine Company
© 2014 Kawasaki H eavy Industries, Ltd. Mar. 21, 2014. (1)
(Australian model only)
TAMPERING WITH NOISE CONTROL SYSTEM
PROHIBITED
Owners are warned that the law may prohibit:
(a) The removal or rendering inoperative by any person other than for purposes
of maintenance, repair or replacement, of any device or element of design
incorporated into any new vehicle for the purpose of noise control prior to
its sale or delivery to the ultimate purchaser or while it is in use; and
(b) The use of the vehicle after such device or element of design has been
removed or rendered inoperative by any person.
TABLE OF CONTENTS
SAFETY INFORMATION .................... 10
Read Owner’s Manual ..................... 10
Training ............................................ 10
Daily Checks and Periodic
Maintenance ................................. 10
Loading and Accessories
Information.................................... 11
Passenger .................................... 12
Baggage and Luggage ................. 13
Accessories .................................. 13
Other Load.................................... 14
If You are Involved in an A ccident.... 14
Safe Operation ................................. 15
Carbon Monoxide Hazard............. 15
Fueling.......................................... 16
Never Ride with Drugs or Alcohol. 16
Protective Gear and Clothing ....... 16
Safe Riding Techniques................ 17
Additional Con siderations for High
Speed Operation ....................... 19
GENERAL INFORMATION................. 21
Specifications................................... 21
Serial Number Locations.................. 26
Location of Labels ............................ 27
Location of Parts .............................. 37
Meter Instruments ............................ 40
Indicators ...................................... 41
Speedometer/Tachometer ............ 49
Coolant Temperature Meter/Clock 50
Display Setting.............................. 53
Features ....................................... 58
Keys ................................................. 60
Ignition Switch/Steering Lock ........... 63
Right Handlebar Switches................ 65
Left Handlebar Switches .................. 66
Brake Lever Adjuster........................ 67
Fuel Tank Cap .................................. 68
Fuel .................................................. 69
Fuel Requirements ....................... 69
Filling the Tank.............................. 72
Side Stand ....................................... 74
Seats................................................ 74
Tying Hooks ..................................... 76
Helmet Cables (Southeast Asia B2
model only) ................................... 77
Tool Kit ............................................. 78
Windshield........................................ 78
Event Data Recorder........................ 81
HOW TO RIDE THE MOTORCYCLE .82
Break-In ........................................... 82
Starting the Engine .......................... 83
Jump Starting ................................... 86
Moving Off........................................ 88
Shifting Gears .................................. 89
Braking............................................. 90
Anti-lock Brake System (ABS) ......... 91
Stopping the Engine......................... 94
Stopping the Motorcycle in an
Emergency ................................... 94
Parking............................................. 95
Kawasaki TRaction Control (KTRC). 97
Power Mode ..................................... 101
KTRC and Power Mo de
Combination ................................. 103
MAINTENANCE AND ADJUSTMENT 105
Daily Checks .................................... 107
Periodic Maintenance....................... 110
Engine Oil ........................................ 115
Coolant............................................. 119
Air Cleaner ....................................... 121
Throttle Control System ................... 122
Idle Speed ........................................ 125
Clutch............................................... 126
Drive Chain ...................................... 127
Brakes.............................................. 130
Brake Light Switches........................ 132
Suspension System ......................... 135
Front Fork ..................................... 135
Rear Shock Absorber ................... 138
Setting Tables............................... 141
Wheels ............................................. 145
Battery.............................................. 149
Headlight.......................................... 152
Fuses ............................................... 153
General Lubrication.......................... 155
Cleaning Your Motorcycle ................ 156
General Precautions ..................... 156
Washing Your Motorcycle ............. 158
APPENDIX .......................................... 162
Storage ............................................ 162
Troubleshooting Guide..................... 165
OWNER SATISFACTION................. 166
Environmental Protection ................. 168
MAINTENANCE RECORD ................. 169
10 SAFETY INFORMATION
SAFETY INFORMATION
Read Owner’s Manual
Read this Owner’s Manual carefully before riding so that you will be
thoroughly familiar with the proper operation of your motorcycle’s controls,
its fe ature s, capabilities, and limitations. This manual offers many safe
riding tips, but its purpose is not to provide instruction in all of the techniques
and skills required to ride a motorcycle
safely.
Training
Kawasaki strongly recommends that
all operators of this vehicle complete a
suitable motorcycle rider training program to learn the proper skills and techniques necessary for safe motorcycle
operation.
DailyChecksandPeriodic Maintenance
It is important to keep your motorcycle properly maintained and in safe riding condition. Inspect your motorcycle before every ride and carry out all
periodic maintenance. See the Daily
Checks section and the Periodic Maintenance section in the MAINTENANCE
AND ADJUSTMENT chapter for more
information.
WARNING
Failure to perform these checks
or to correct a problem before
operation may result in serious
damage or an accident. Always
perform daily checks before op-
eration.
SAFETY INFORMATION 11
To ensure your motorcycle is serviced using the latest servicing information, it is recommended that an
authorized Kawasaki Dealer performs
the periodic maintenance as directed
in the Owner’s Manual.
If you notice any irregular operating condition, have your motorcycle
thoroughly checked at an authorized
Kawasaki dealer as soon as possible.
Loading and Accessories Information
WARNING
Incorrect loading, improper installation or use of accessories
or modification of your motorcycle may result in an unsafe riding
condition. Before you ride the
motorcycle,makesureitisnot
overloaded and that you have
followed these in structions.
Maximum L oad
Weight of rider, passenger, baggage,
and accessories must not exceed 195 kg
(430 lb).
With the exception of genuine
Kawasaki Parts a nd Accessories,
Kawasaki has no control over the
design or application of accessories.
In some cases, improper installation
12 SAFETY INFORMATION
or use of accessories, or motorcycle
modification, will void the motorcycle
warranty; can negatively affect performance, stability and safety; and can
even be illegal.
In selecting and using accessories,
and in loading the motorcycle, you are
personally responsible for your own
safety and the safety of other persons
involved.
NOTE
Kawasaki Parts and Accessories
○
have been specially designed for
use on Kawasaki motorcycles. We
strongly recommend that all parts
and accessories you add to your
motorcycle be genuine Kawasaki
components.
Because a motorcycle is sensitive to
changes in weight and aerodynamic
forces, you must take extreme care in
carrying cargo, passengers and/or in
fitting additional accessories. The following general guidelines have been
prepared to assist you in m aking your
determinations.
Passenger
1. Never carry more than one passenger.
2. The passenger should only sit on the
pillion.
3. Any passenger should be thoroughly familiar with motorcycle operation. The passenger can affect
control of the motorcycle by improper positioning during cornering
and sudden movements. It is important that the passenger sits still
while the motorcycle is in motion
and not interfere with the operation
of the motorcycle. Do not carry animals on your motorcycle.
SAFETY INFORM ATION 13
4. Do not carry passengers unless
passenger footpegs are installed.
Instruct any passenger before riding
to keep his or her feet on the passenger footpegs and hold on to the
operator or seat strap. Do not carry
a passenger unless he or she is tall
enough to reach the footpegs with
their feet.
Baggage and Luggage
1. All baggage should be carried as
low as possible to reduce the effect
on the motorcycle’s center of gravity. Baggage weight should also be
distributed equally on both sides of
the motorcycle. Avoid carrying baggage that extends beyond the rear
of the motorcycle.
2. Baggage should be securely attached. Make sure that the baggage
will not move around while you are
riding. Recheck baggage security
as often as possible (not while the
motorcycle is in motion) and adjust
as necessary.
3. Do not carry heavy or bulky items
on a luggage rack. It is designed
for light items, and overloading can
affect handling due to changes in
weight distribution and aerodynamic
forces.
Accessories
1. Do not install accessories or carry
baggage that impairs the performance of the motorcycle. Make
sure that you have not adversely
affected any lighting components,
road clearance, banking capability
(i.e., lean angle), control operation,
wheel travel, front fork movement,
14 SAFETY INFORMATION
or any other aspects of the motorcycle’s operation.
2. Weight attached to the handlebars
or front fork will increase the mass
of the steering assembly and can
result in an unsafe riding condition.
3. Fairings, windshields, backrests,
and other large items have the capability of adversely affecting stability and handling of the motorcycle,
not only due to their weight, but
also due to the aerodynamic force
acting on these surfaces while the
motorcycle is in operation. Poorly
designed or installed items can result in an unsafe riding condition.
Other Load
1. This motorcycle is not intended to
be equipped with a sidecar or to be
used to tow any trailers or other vehicles. Kawasaki does not manufacture sidecars or trailers for motorcycles and cannot predict the effects of such accessories on handling or stability, but can only warn
thattheeffectscanbeadverseand
that Kawasaki cannot assume responsibility for the results of such
unintended use of the motorcycle.
2. Furthermore, any adverse effects on
motorcycle components caused by
the use of such accessories will not
be remedied under warranty.
If You are Involved in an Accident
Make sure of your own safety first.
Determine the severity of any injuries
and call for emergency assistance if
needed. Always follow applicable laws
and regulations if any other person, vehicle or property is involved.
Do not attempt to continue riding
without first evaluating your motorcycle’s condition. Inspect for fluid leaks,
check critical nuts and bolts, and check
the handlebars, control levers, brakes,
and wheels for damage and proper
function. Ride slowly and cautiously
- your motorcycle may have suffered
damage that is not immediately apparent. Have your motorcycle thoroughly
checked at a Kawasaki dealer as soon
as possible.
Safe Operation
The following should be carefully observed for safe and effective vehicle
operation.
SAFETY INFORM ATION 15
Carbon Monoxide Hazard
DANGER
Exhaust gas contains carbon
monoxide, a colorless, odorless
poisonous gas. Inhaling carbon
monoxide can cause serious
brain injury or death.
Do not run the engine in enclosed areas. Operate only in a
well-ventilated area.
16 SAFETY INFORMATION
Fueling
WARNING
Gasoline is extremely flammable
and can be explosive under certain conditions.
To avoid a possible fire or explosion, turn the ignition switch to
“OFF.” Do not smoke. Make sure
theareaiswellventilatedand
free from any source of flame or
sparks; this includes any appliance with a pilot light.
Never Ride with Drugs or Alcohol
Alcohol and drugs impair your judgment and reaction time. Never consume alcohol or drugs before or while
riding motorcycles.
Protective Gear and Clothing
Helmet
Kawasaki strongly recommends both
the operator and passenger wear a helmet even if this is not a legal requirement.
- Make sure that your helmet fits cor-
rectly and is properly fastened.
- Choose a mot orcycle helm et that
meets the safety standards applicable to your country. Ask your
motorcycle dealer to advise you if
necessary.
SAFETY INFORM ATION 17
Eye Protection
Always use eye protection. If your
helmet does not have a v isor installed,
wear goggles.
Gloves
Wear gloves which have suitable
protection for your hands, especially
against abrasion.
Clothing
Wear protective clothing.
- Wear bright, highly visible cloth ing
that allows freedom of movement
to suit your riding style.
- Always wear a long- s lee ve d jacket
and long t ro users w hich a re abrasion resistant and keep you warm.
- Avoid wearing clothes which have
loose cuffs or other fastenings
which could interfere with the controls of your motorcycle.
Boots
Wear proper protective boots that fit
properly and do not interfere with gear
shifting or braking.
Safe Riding Techniques
Keep Hands on Handlebars
When riding always keep both hands
on the handlebars and both feet on the
footpegs. Removing your hands from
the handlebars or feet from the footpegs while riding can be hazardous. If
you remove even one hand or foot, you
reduce your ability to control the motorcycle.
Look Over Your Shoulder
Before changing lanes, look over
your shoulder to make sure the way
is clear. Do not rely solely on the rear
18 SAFETY INFORMATION
view mirror; you may misjudge a vehicle’s distance and speed, or you may
not see it at all.
Accelerate and Brake Smoothly
In general your actions should be
smooth as sudden acceleration, braking or turning may caus e loss of control,
especially when riding in wet conditions
or on loose road surfaces, when the
ability to maneuver will be reduced.
Select Correct Gear Speeds
When going up steep slopes, shift to
a lower gear so that there is power to
spare rather than overloading the engine.
Use Both Front and Rear Brakes
When applying the brakes, use both
the front and rear brakes. Applying
only one brake for sudden braking may
cause the motorcycle to skid and lose
control.
Use Engine Brake
When going down long slopes, help
control vehicle speed by closing the
throttle so that the engine can act as an
auxiliary brake. Use the front and rear
brakes for primary braking.
Riding in Wet Conditions
Rely more on the throttle to control
vehicle speed and less on the front and
rear brakes. The throttle should also be
used judiciously to avoid skidding the
rear wheel from too rapid acceleration
or deceleration.
Braking performance is also reduced
in wet conditions. Carefully ride at a
slow speed and apply the brakes several times to help dry and restores them
to normal operating performance.
Lubricate the drive chain after wet
-weather riding to prevent rust and corrosion.
SAFETY INFORM ATION 19
Ride Prudently
Riding at the proper speed and avoiding unnecessarily fast acceleration are
important not only for safety and low
fuel consumption but also for long vehicle life and quieter operation.
Riding on Rough Roads
Exercise caution, slow down, and
grip the fuel tank with the knees for
better stability.
Acceleration
When quick acceleration is necessary to pass another vehicle, shift to
a lower gear to obtain the necessary
power.
Downshifting
To avoid engine damage and rear
wheel lock-up do not downshift at high
rpm.
Avoid Unnecessary Weaving
Unnecessary weaving jeopardizes
the safety of both the rider and other
motorists.
Additional Considerations for
High Speed Operation
WARNING
Handling characteristics of a
motorcycle at high speeds m ay
vary from those you are familiar
with at legal highway speeds.
Do not attempt high speed oper-
ation unless you have received
sufficient training and have the
required skills.
Do not operate at high speeds on
public roads.
20 SAFETY INFORMATION
Brakes
The importance of the brakes, especially during high speed operation,
cannot be overemphasized. Check to
see that they are correctly adjusted and
functioning properly.
Steering
Looseness in the steering can cause
loss of control. Check to see that the
handlebars turns freely but has no play.
Tires
High speed operation is hard on tires,
and good tires are crucial for safe riding. Examine their overall condition, inflate them to the proper pressure, and
check the wheel balance.
Fuel
Have sufficient fuel for the high fuel
consumption during high speed operation.
Engine Oil
To avoid engine s eizure and resulting
loss of control, make sure that the oil
level is at the upper level line.
Coolant
To avoid overheating, check that the
coolant level is at the upper level line.
Electrical Equipment
Make sure that the headlight,
tail/brake light, turn signals, horn, etc.,
all work properly.
Miscellaneous
Make sure that all nuts and bolts are
tight and that all safety related parts are
in good condition.
Specifications
GENERAL INFORMATION 21
GENERAL INFORMATION
PERFORMAN
Maximum Horsepower
Maximum Torque
Minimum Turning Radius
DIMENSI
Overal
Overal
Overal
Wheelbase
Road C
CE
(SEA-B1/B2, TH) 100.9 kW (137 PS) @9 800 r/min (rpm)
(SEA-B1/B2, TH) 109 N·m (11.1 kgf·m, 80 ft·lb) @7 300 r/min (rpm)
ONS
l Length
lWidth
l Height/High Position
learance
104.5 kW (142 PS) @10 000 r/min (rpm)
111N·m(11.3kgf·m,82ft·lb)@7300r/min(rpm)
3.1 m (12
2105mm
790 mm (
1170mm
1445mm
135 mm
2in.)
(82.9 in.)
31.1 in.)
(46.1 in.)/1 230 mm (48.4 in.)
(56.9 in.)
(5.3 in.)
22 GENERAL INFORMATION
Curb Mass
ENGINE
Type DOHC, 4-cylinder, 4-stroke, liquid-cooled
Displacement 1 043 cm³ (63.6 cu in.)
Bore × Stroke 77.0 × 56.0 mm (3.0 × 2.2 in.)
Compression Ratio 11.8:1
Starting System Electric starter
Cylinder Numbering Method Left to right, 1-2-3-4
Firing Order 1-2-4-3
Fuel System FI (Fuel Injection)
Ignition System Battery and coil (transistorized ignition)
on Timing
Igniti
(Electronically advanced)
Spark Plug:
Lubrication System Forced lubrication (wet sump)
(ZX1000L) 230 kg (507 lb)
(ZX1000M) 231 kg (509 lb)
10° BTDC @1 100 r/min (rpm) ∼ 40.2° BTDC @5 200
r/min (rpm)
Type
Gap 0.8 ∼ 0.9 mm (0.031 ∼ 0.035 in.)
NGK CR9EIA-9
GENERAL INFORMATION 23
Engine Oil: Type API SG, SH, SJ, SL or SM with JASO MA, MA1 or MA2
Viscosity SAE 10W-40
Capacity 4.0 L (4.2 US qt)
Coolant Capacity 2.9 L (3.1 US qt)
TRANSMISSION
Transmission Type 6-speed, constant mesh, return shift
Clutch Type Wet, multi disc
Driving System Chain drive
Primary Reduction Ratio 1.627 (83/51)
Final Reduction Ratio 2.733 (41/15)
Overall Drive Ratio 4.925 (Top gear)
Gear Ratio: 1st 2.600 (39/15)
2nd 1.950 (39/20)
3rd 1.600 (24/15)
4th 1.389 (25/18)
5th 1.238 (26/21)
6th 1.107 (31/28)
24 GENERAL INFORMATION
FRAME
Caster 24.5°
Trail 102 mm (4.0 in.)
Tire Size: Front 120/70ZR17 M/C (58W)
Rear 190/50ZR17 M/C (73W)
Rim Size: Front J17M/C × MT3.50
Rear J17M/C × MT6.00
Fuel Tank Capacity 19 L (5.0 US gal)
Brake Fluid: Front DOT4
Rear DOT4
ELECTRICAL EQUIPMENT
Battery 12V10Ah(10HR)
Headlight: High Beam 12 V 55 W × 2
Low Beam 12 V 55 W
Tail/Brake Light LED
SEA-B1: Southeast Asia B1 model (with Evaporative Emission Control System)
SEA-B2: Southeast Asia B2 model
GENERAL INFORMATION 25
TH: Thailand model
Even if one of LED (Light Emitting Diode) tail/brake light does not go on, consult
with an authorized Kawasaki dealer.
Specifications are subject to change without notice, and may not apply to every
country.
26 GENERAL INFORMATION
Serial Number Locations
The engine and frame serial numbers are used to register the motorcycle. They
are the only means of identifying your particular machine from others of the same
model type. These s erial numbers may be needed by your dealer when ordering
parts. In the event of theft, the investigating authorities will require both numbers
as well as the model type and any peculiar features of your machine that can help
them identify it.
Engine No.
A. Engine Number
Frame No.
A. Frame Number
Location of Labels
All warning labels which are on your
vehicle are repeated here. Read labels
on your vehicle and understand them
thoroughly. They contain information
which is important for your safety and
the safety of anyone else who may operate your vehicle. Therefore, it is very
important that all warning labels be on
your vehicle in the locations shown. If
any label is missing, damaged, or worn,
get a replacement from your Kawasaki
dealer and install it in the co rrect position.
NOTE
The sample warning labels in this
○
section have part numbers to help
GENERAL INFORMATION 27
you and your dealer obtain the correct replacement.
Refer to the actual vehicle label for
○
model specific d ata grayed out in the
illustration.
1. Brake Fluid (Front)
28 GENERAL INFORMATION
2. Brake Fluid (Rear)
3. Battery Poison/Danger
4. Rear Shock Ab sorb er Warning
GENERAL INFORMATION 29
5. Radiator Cap Danger
*6. Helmet Wearing
7. Fuel Notice
**8. Fuel Level
9. Important Drive Chain Information
10. Tire and Load Dat a
*: only on Thailand model
**: only on Sou th east Asia B1 model
Loading...