How it Works
Kawasaki
Loading...
J300 2014
Owner's Manual
68 pgs8.29 Mb0

Kawasaki J300 ABS 2014, J300 2014 Owner's Manual

www.demandproducts.com
31
EIFS CATALOG
CONTINUOUS INSULATION (CI)
SPECIAL FEATURE
How to Order
Return Policy
No merchandise can be returned without an authorization number. We do not accept returns on chemicals or coatings. Returns must be made within 15 days of invoice and must be in new condition. Materials returned must be shipped prepaid. Discontinued items, custom orders or items that have been out of our factory for 3 months or longer cannot be returned. Returns subject to minimum 15% restocking fee.
EIFS products in this catalog are sold through distributors or manufacturers only
All property rights are reserved. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products.
Prices are subject to change without notice.
Please Note — Disclaimer
The products in this catalog are offered as options for the
purchaser. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage
or expense of any kind arising out of the use or inability to use
our products. The product descriptions and/or photos described
or shown may have changed since publication of this catalog and
therefore information may be outdated.
Warranty
All of our products carry an unconditional 6 month guarantee, but
Demand must be notified within 48 hours of receipt of defective or
damaged merchandise or shortages. Any equipment or tools that are
disassembled without prior written consent from Demand Products
will have the warranty voided. Defective products will either be
replaced or repaired at no charge. Abused tools will be repaired and
returned only if the customer consents to charges in writing.
©2014 Demand Products, Inc. – Demand Products is a trademark of Demand Products, Inc., Alpharetta, GA 30004 USA
Product Index
FASTENERS Page 6-11 HOT KNIVES Page 12-21 RASPS Page 26-29 CHEMICALS Page 30-33 FOAM CUTTING Page 52-57
FOAM RECYCLING Page 58-59 WATER MANAGEMENT Page 34-35 MIXERS / SPRAYERS Page 24, 25 & 64 HAND TOOLS Page 40-51 CRAFT HOT WIRE CUTTERS Page 66-67
Demand Products
Solutions in over 120 countries.
NEW TOOLS FOR MEETING THE NEW CODES FOR MORE
ENERGY EFFICIENT COMMERCIAL BUILDINGS.
FASTENERS
HOTWIRE
MACHINES
HOTKNIVES
DURARASPS
BOW
CUTTERS
EXPERT
ADVICE
1.800.325.7540
FOAM
CUTTERS
CI
TOOL
New legislation* setting higher national and state standards for energy efficiency and re-setting commercial building energy codes in every state will create growing demand for continuous insulation (CI) products. We have the critical tools and know-how for assembling the essential equipment for you to meet the increased demand for high-efficiency, readily available insulation materials.
To learn more about CI materials & methods for meeting the demand from the change in national, state and local building energy codes contact Demand Products at 1.800.325.7540 or info@demandproducts.com.
* The U.S. Department of Energy (DOE) mandates all states must enforce a commercial building energy code that meets or exceeds ASHRAE Standard 90.1-2010 effective Oct. 18, 2013.
Continuous Insulation (CI)
CI Mandate Effects 90% of New US Building Sites
Continuous Insulation is different from what has been, more or less, the conventional approach of insulating spaces between framing studs. Non-continuous insulation inevitably creates pockets and gaps and air leakage resulting in ‘thermal bridging’ that can cost a typical steel frame wall up to 50 percent of its R-value and up to 24 percent or more of the R-value of a wood frame wall. Those losses are so great they can not be made up (or meet the new code) simply by adding thicker cavity insulation. As you can see, Continuous Insulation offers a significant savings and a dramatic solution for commercial buildings everywhere.
Continuous Insulation is made up of either Expanded Polystyrene (EPS) of Extruded Polystyrene (XPS)
What is CI?
www.ashrae.org www.iccsafe.com www.energycodes.gov
Web Resources for CI
CODE REQUIRMENT: R-13 CAVITY BATT WITH NO CI
CODE REQUIRMENT: R-13 CAVITY BATT
+ R 3.8 CI OR + R 7.4 CI
Demand Products CI Solutions
DP300CI and Zinc Coated Screw Assembled with Washer for CI Installation
DPCI-0 DPCI-1 DPCI-15 DPCI-2
1 1/4” 1 5/8 “ 2” 2 1/2”
Size
Item#
.625” 1“ 1 1/2” 2”
Insulation
Qty
1000 1000 1000 1000
Steel Screw w/ DP300CI Steel Screw w/ DP300CI Steel Screw w/ DP300CI Steel Screw w/ DP300CI
Description
CI Washers for Rigid and Soft Foam
DP300CI DP400CI
Item# Qty
1000 1000
CI Washer CI Washer
Description
DP300CI
Designed for all foams: EPS, XPS,
Pink & Blue Boards and PolyIso
DP400CI
Designed for soft foams: EPS, PolyIso
US Department of Energy (DOE) mandated all affected states must update their commercial building code to meet or exceed American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) standard 90.1-2010
US Department of Energy Mandate
Q&A
Why CI?
It’s a simple equation. Continuous insulation works. It works as an integral element in implementing Exterior Insulation and Finish Systems (known as EFIS). Architects and developers have experience with EFIS as an alternative or replacement for stucco. Now, they are recognizing how EFIS and utilizing continuous insulation is a tremendous approach to meeting the new, higher energy efficient commercial building codes. Bottom line; continuous insulation is an all-around winner.
STEEL STUDS
INTERIOR DRYWALL
EPS OR XPS BOARD
CI FASTENER
INSULATION
EXTERIOR CLADDING
EXTERIOR SHEATHING
CI thickness minimum of .625” (4.1 R-Value) up to 2” (13.0 R-Value) maximum, board sizes from 2’ x 4’ up to 4’ x 12’
CI
TOOL
Look for Icon for Specialized CI Tools
6
• 2” Diameter
• Large Keyholes for Strong Mechanical Bonding
• White — No Color Bleed Thru
• Manufacturer Approved
• 20 Year Warranty
• Finger Closures
• Cone Design Prevents Popups
• Eliminates Thermal Shorts
PB™ Washer
Polymer Based System Washer
• 2” Diameter
• Manufacturer Approved
• Cone Design Prevents Popups
• White — No Color Bleed Thru
• Finger Closures
• Eliminates Thermal Shorts
• Large Keyholes for Strong
Mechanical Bonding
Available in Boxes
500 or 1000
PBH™ Washer
The Builder’s Choice
Available in Boxes
500 or 1000
Fastener Patterns & Windload Specs on Pages 9,10 & 11
PBH PBH500
PBH Washer PBH Washer
1,000
500
89.00
54.00
Item #
Description
Qty Per Box
Price
PB PB500
PB Washer PB Washer
1,000
500
109.00
64.50
Item #
Description
Qty Per Box
Price
6
PBH & PB
7
WOOD/LITE-METAL
PBH w/Wood/Lite-Metal Screw
PBH and Wood/Lite-Metal Screws, Assembled with Washer for Wood and Lite-Gauge Metal Application, 20- to 26-gauge
WH1 15⁄8” 1” 1,000 16 lbs 135.00
WH2 2” 11⁄2” 1,000 18 lbs 145.00
WH3 21⁄2” 2” 1,000 20 lbs 155.00
WH4 3” 21⁄2” 1,000 22 lbs 175.00
WH6 4” 3-31⁄2” 1,000 39 lbs 245.00
WH7 5” 4-41⁄2” 1,000 47 lbs 320.00
WH8 6” 5-51⁄2” 1,000 56 lbs 360.00
Insulation Thickness
PBH Washer with Steel Screw
PBH and Steel Screws, Assembled with Washer for Heavy-Gauge Metal Application, 12- to 20-gauge
SH1 15⁄8” 1” 1,000 17 lbs 155.00
SH2 2” 11⁄2” 1,000 19 lbs 165.00
SH3 25⁄8” 2” 1,000 21 lbs 189.00
SH4 3” 21⁄2” 1,000 24 lbs 219.00
SH5 4” 3”-31⁄2” 1,000 36 lbs 285.00
SH6 5” 4”-41⁄2” 1,000 48 lbs 410.00
Insulation Thickness
PB Wood/Lite-Metal Screw
PB and Wood/Lite-Metal Screws, Assembled with Washer for Wood and Lite-Gauge Metal Application, 20- to 26-gauge
W1 15⁄8” 1” 1,000 17 lbs
W2 2” 11⁄2” 1,000 19 lbs
W3 21⁄2” 2” 1,000 21 lbs
W4 3” 21⁄2” 1,000 23 lbs
W6 4” 3-31⁄2” 1,000 31 lbs
W7 5” 4-41⁄2” 1,000 39 lbs
W8 6” 5-51⁄2” 1,000 45 lbs
Insulation Thickness
PB Washer with Steel Screw
PB and Steel Screws, Assembled with Washer for Heavy-Gauge Metal Application, 12- to 20-gauge
S1 15⁄8” 1” 1,000 17 lbs
S2 2” 11⁄2” 1,000 19 lbs
S3 25⁄8” 2” 1,000 21 lbs
S4 3” 21⁄2” 1,000 24 lbs
S5 4” 3”- 31⁄2” 1,000 36 lbs
S6 5” 4”- 41⁄2” 1,000 38 lbs
S7 6” 5”- 51⁄2” 1,000 45 lbs
Insulation Thickness
PBH with Tapcon™ Screw
PBH and Masonry Screws, Assembled with Washer for Concrete and Masonry Application
MH1 13⁄4” 1” 1,000 20 lbs 299.00
MH2 21⁄4” 11⁄2” 1,000 24 lbs 339.00
MH3 23⁄4” 2” 1,000 26 lbs 359.00
MH4 31⁄4” 21⁄2” 1,000 28 lbs 439.00
MH5 4” 3” 1,000 32 lbs 595.00
MH6* 5” 4” 1,000 38 lbs 1,059.00
Insulation Thickness
PB with Tapcon™ Screw
PB and Masonry Screws, Assembled with Washer for Concrete and Masonry Application
M1 13⁄4” 1” 1,000 20 lbs
M2 21⁄4” 11⁄2” 1,000 24 lbs
M3 23⁄4” 2” 1,000 26 lbs
M4 31⁄4” 21⁄2” 1,000 28 lbs
M5 4” 3” 1,000 32 lbs
M6* 5” 4” 1,000 38 lbs
Insulation Thickness
20 to 26 GAUGE
STEEL 12 to 20 GAUGE MASONRY - SOLID OR BRICK
WOOD
LITE-METAL
20 to 26 GAUGE
STEEL 12 to 20 GAUGE
MASONRY - SOLID OR BRICK
* Does not include drill bits
www.demandproducts.com • 1-800.325.7540
7
WASHERS
8
Other type and size pre-assembled screws are available upon request.
Wire Lath Wire Mesh Fiber Mesh Continuous Insulation
• Low Profile Design. Seats Flush
• Key Holes Create Strong Mechanical Bond
• Large 1
3
/4” Head Diameter
• Strong Polypropylene Material Provides
Impact Resistance and Long Life
DP 300 Washer
Pre-Assembled with Wood Screw
DP 400 Washer
Time Saving Pre-Spot Stem
Fastener Patterns & Windload Specs on Pages 9, 10 & 11
• Low Profile Design. Seats Flush
• Key Holes Create Strong Mechanical Bond
• Large 1
3
/4” Head Diameter
• Strong Polypropylene Material Provides
Impact Resistance and Long Life
• Use for Lath and Plastic Lath Attachment
DP 300 Washer
All Purpose PM Washer
DP300
1,000 6 lbs
Item #
Qty Per Box
Approx. Wt
D3W1 D3W2 D3W3
1
5/8
” 2” 2
1/2
”
1” 1
1/2
”
2”
1,000 1,000 1,000
14 lbs 16 lbs 18 lbs
Item #
Size
Insulation Thickness
Qty Per Box Approx. Wt
DP400
1,000 6 lbs
Item #
Qty Per Box
Approx. Wt
WASHERS
8
The DP300 & DP400 secures rigid insulation to multiple substrates
CI
TOOL
9
Testing was performed by Underwriters Laboratories per ASTM E330 and E331. Procedure B.
WINDLOAD SPECS FOR PB, PBH, DP300 & DP400 WASHERS
SPECIFICATIONS:
Diameter: 1 3⁄4” Material: Polypropylene Push Through @ 10° 256 lbs. Push Through @ 180° 177 lbs. Pull Over 50.8 lbs. @ 10° Pull Over 122.4 lbs. @ 180°
DP300 Washers
SPECIFICATIONS:
Diameter: 1 3⁄4” Material: Polypropylene Push Through @ 10° 256 lbs. Push Through @ 180° 177 lbs. Pull Over 50.8 lbs.@ 10° Pull Over 122.4 lbs. @ 180°
DP400 Washers
Demand PB Washer & PBH Washers
The 2”diameter increases wind­load resistance and has 25% more pullover value than 1 3⁄4” washers. Structural performance tests con­ducted with ASTM E-330. Average ultimate negative load was -97 PSF.
Fastener Pull-Through Results
in Average Pounds Ultimate
Insulation Pull-Over Results
in Aver. Pounds Ultimate (1 Lb Density EPS)
Tapcon Dec-King S-12 401 410 427
1” 11/2” 2”
85.6 93.6 108
• Grip-Guard
™
Galvalume Coated Steel
• Helps Stabilize and Re-Support Old Plaster
•
1
1
/4
” Diameter Plate
• .023 to .025 Gauge with 4 Keyholes
• Edges Taper Toward Work Area
• Tapered Edge Will Not Catch Trowel Edge
• For Downspouts, Lights, Fixtures, etc.
• High-Strength Plastic Construction
with Foam Washer
• 1
1
/2” Deep x 1” Wide, 1/8” Foam Washer
• No Thermal Bridging
• Can Be Installed with Commercial Drill
• Holds Trim to Foam
• Mechanically Attaches Control Joint
to Substrate Foam Insulation
• Allows Control Joints to Move with
Foam Insulation
• G90 Chromium Plated
• Meets ASTM A653 Standard
• Pre-Spot Tabs • 1
1
/4” Diameter Plate
• Can be Screwed, Nailed or Shot
• Works Well with Multiple Substrates
• Covers Many Rigid Insulation Applications
DP500 Tab Washer
Great for Lath & Stucco
Wall Tac
™
Holds Trim & Joints
DP525 Washer
Plaster Repair Washers
EPS Foam Auger Anchor
Spiral Anchoring to EIFS
DP500
1,000 6 lbs 45.00
Item #
Qty Per Box
Approx. Wt Price
WT1 WT158
1,000 1,000
1” 1
5/8
”
3 lbs 5 lbs
65.00
75.00
Item # Size
Qty Per Box
Approx. Wt Price
DP525-1 DP525
100
1,000
1 lb 6 lbs
10.00
55.00
Item #
Qty Per Box
Approx. Wt Price
SD10
10 1 lb 10.00
55.00
Item #
Qty Per Box
Approx. Wt Price
WT1
WT158
Foam Tack Fastener
Holds Foam to Foam
TAC75 TAC112 TAC134
Item #
3
⁄4” Trim to Foam Trim Tac (Pak of 250) 11⁄2” Foam to Foam Insul Tac (Pak of 250) 13⁄4” Foam to Foam Arrow Tac (Pak of 250)
Description
15.00
15.00
15.00
Price
www.demandproducts.com • 1-800.325.7540
WASHERS
9
TAC75 TAC112 TAC134
These spacing patterns are general guidelines for mechanical installation of EPS to different substrates when used in conjunction with a typical EIFS system or similar systems. Construction projects vary and yours may be different from these fastener suggestions. Please consult your EIFS manufacturer when using Demand fasteners along with adhesives. For additional information call Demand Products Technical Services at 1-800-325-7540
12” 12” 12”
6”
6”
6”6”
48”
24
”
12
”
Wood, Plywood, Metal Siding, Masonry and Concrete
1.0 Lb. EPS Pattern A Pattern B
1” 83 85
1
1
/2” 105 104
Wind Load Capacity
(Average Ultimate PSF, Negative Pressure
WASHER PLACEMENT PATTERNS PB & PBH WASHERS
Structural Substrates Such as Wood Sheathing, Concrete, Masonry & Metal Siding
8
”
24
”
8
”
48”
4
”
24
”
4”10
”
10”10
”
10
”
48”
Structural Substrates Such as Wood Sheathing, Concrete, Masonry & Metal Siding
16” 16” 8”8”
48”
24
”
Non-Structural Sheathings such as OSB, Gypsum, Dens-Glass Gold
4”
4”
8
”
8
”
• Unique
Textured 2
5
/16”
Thin Profile
Head Locks
Coatings with
Multiple Key
Holes
• Reinforced Ribbed
Shank for Strength
•
Flex Lock
™
Rings
Insure Excellent
Pullout Values
• Requires a
5
/16” Drill Bit
•
Polypropylene
Plastic
*Concrete Strength f’c = 2500 psi **Hollow Concrete Block meets ASTM SPEC C90
Grade N Type II. Pullout values may be limited by the strength of the material fastened.
Congrip Fastener Technical Data for Hollow & Solid Block
Hollow Solid Average Ultimate Pullout Minimum Minimum
** Hollow
Anchor Bit Embedment Insulation Insulation *Concrete
Concrete
Brick
Item # Length Diameter Depth (in.) Thickness Thicknes Block
CG0 2”
5
⁄16” 11⁄8” 1” 0” – 7⁄8” 110 45 55
CG1 23⁄4”
5
⁄16” 11⁄8” 11⁄2” 7⁄8” – 13⁄4” 110 45 55
CG2 31⁄2”
5
⁄16” 11⁄8” 2” 2” – 23⁄8” 110 45 55
CG3 41⁄4”
5
⁄16” 11⁄8” 21⁄2” – 3” 23⁄4” – 31⁄8” 110 45 55
CG4 5”
5
⁄16” 11⁄8” 31⁄4” – 31⁄2” 31⁄2” – 4” 110 45 55
CG5 53⁄4”
5
⁄16” 11⁄8” 4” – 43⁄4” 4” – 43⁄4” 110 45 55
CG0 CG1 CG2 CG3 CG4 CG5
2” 2
3/4
”
3
1/2
”
4
1/4
” 5” 5
3/4
”
250 250 250 250 250 250
106.68
124.25
128.60
274.88
365.96
417.98
Item #
Length
Qty Per Box
Price
Congrip
Quickest & Best Way for Fastening to Concrete
• Large 2 5/16” Head
• Reduces Installation Time By Up To 40%
• Installs Quickly
• Strong Pullout Values
• Eliminates Thermal Shorts
• Requires a 5⁄16” Drill Bit
8”8”8
”
8”8
”
6”
6”
12
”
4”
4
”
8
”
8
”
10
MASONRY
For Use with
Steel
From 20-gauge to 12-gauge
For Use with
Concrete
10 FREE MDB55 Drill Bits per box of 1,000 Screws
Premium Coated Screws
Wood-Lite Metal
Steel – ClimacoatTM Protection
For Use with Steel from 20 to 12-Gauge Studs.
Masonry
Masonry – ClimasealTM Protection
For Use with Concrete Block, Poured Concrete, or Masonry.
Please Note: The pullout values listed are the ultimate averages achieved under laboratory conditions. An appropriate safety margin factor should be applied to these values to achieve a design value.
Fastener
Depth of Embedment in Solid Material (inches)
Diameter
1”
11⁄4”
11⁄2”
13⁄4”
3
⁄16” *209 *357 *468 *547
Test #CH3748/Pittsburgh Testing Laboratories
Hollow Block
Coating: CLIMASEAL™ for masonry/concrete
fasteners only
Corrosion Resistance: Kestemich Results
(Din 50018, 2.OL) • 30 cycles - 10% or less
red rust. Salt Spray Results (ASTM B117) • 720 Hours -10% or less red rust.
Fastener
Depth of Embedment in Solid Material (inches)
Diameter
1”
11⁄4” 11⁄2”
13⁄4”
Test #CH3932/Pittsburgh Testing Laboratories
Solid Concrete
Coating: CLIMASEAL™ for masonry/concrete
fasteners only
Corrosion Resistance: Kestemich Results
(Din 50018, 2.OL) • 30 cycles - 10% or less
red rust. Salt Spray Results (ASTM B117)
• 720 Hours -10% or less red rust.
Coating: CLIMACOAT™
Corrosion Resistance: Kestemich Results (Din 50018, 2.OL ) • 20 cycles -
10% or less red rust. Salt Spray Results (ASTM B117) • 500 hours - 10% or less red rust for wood, lite-metal and steel fasteners.
Nominal Gauge 26 24 22 20
Pullout Strength 120 183 248 296
(
1
⁄4” Minimum Through Penetration
)
(conforms to ASTM C-548 & C-1002)
Nominal Gauge 18 16 14 12
Pullout Strength 471 679 847 1225
(
1
⁄4” Minimum Through Penetration
)
(conforms to ASTM C-954 & C-548)
For Use
with Wood
& Metal
From 26-gauge to 20-gauge
For Use
with Wood
& Metal
Steel
Wood-Lite Metal – ClimacoatTM Coated
For Use with Wood & Metal from 26 to 20-Gauge.
WS1 WS2 WS3 WS4 WS6 WS7 WS8
7 X 1
5/8
” 8 X 2” 8 X 2
1/2
” 8 X 3” 8 X 4” 10 X 5” 10 X 6”
1,000 1,000 1,000 1,000 1,000 1,000 1,000
Item #
Length Qty Per Box
28.50
38.95
49.25
65.00
138.75
175.00
225.00
Price
SS1 SS2 SS3 SS4 SS5 SS6 SS7
6 X 1
5/8
” 6 X 2” 8 X 2
5/8
” 8 X 3” 10 X 4” 10 X 5” 10 X 6”
1,000 1,000 1,000 1,000 1,000 1,000 1,000
Item #
Length Qty Per Box
36.95
49.50
23.50
104.75
159.25
265.00
434.25
Price
*10 free MDB55 Drill BIits per box of 1,OOO screws. ** Drill Bit Not Included
MS1 MS2 MS3 MS4 MS5 MS6**
3/16 x 1
3/4
”
3/16 x 2
1/4
”
3/16 x 2
3/4
”
3/16 x 3
1/4
” 3/16 x 4” 1/4 x 5”
1,000 1,000 1,000 1,000 1,000 1,000
Item #
Length Qty Per Box
183.75
215.00
235.00
320.00
475.00
918.75
Price
3
⁄16” 341 581 863 1059
Coating: CLIMASEAL™ for masonry/concrete fasteners only
Corrosion Resistance: Kestemich Results (Din 50018, 2.OL) • 30 cycles - 10% or less red rust.
Salt Spray Results (ASTM B117) • 720 Hours -10% or less red rust.
*Note 1: Masonry must be pre-drilled
1
⁄2” deeper than fastener penetration.
*Note 2: Hardness of masonry varies and the standard drill bit may not always drill the adequate hole. Please consult Demand Products for assistance in proper drill bit diameter.
11
PREMIUM SCREWS
Screw Pullout Performance Data
2”, 4” & 6” Blades Available
Comes Complete with 4” & 6” Blades, Custom Blade Adapter, Cleaning Brush and Case
HKTCR
Hot Knife™ CR CutRite™
Complete with Case
Custom Blade Adapter
All of these Custom Blades will fit your Hot Knife
™
CR
CutRite
™
using the Blade Adapter
ADJUSTABLE HEAT DIAL
250 450G50
G75 G100 G75SP SPV SPSQ
STOPL
STOPS
300 550
HOT KNIFE CR
12
HEATS UP TO 10” WIRE
• 150 Watts
• Includes 4” & 6” Blades and Case
• Electronic Circuit Board Powered
• Variable Power Control
• Lightweight
• Stamped Blades
• Spring Loaded Safety Trigger
HKTCR
200CR 400CR 600CR HDC220 HKTCRP01
Item #
Hot Knife™ CR & Blade Adapter w/ 4” & 6” Blades 2” Blade 4” Blade 6” Blade 220 Volt Converter Blade Adapter
Description
CI
TOOL
HKTCRP01
ACCESSORIES
www.demandproducts.com • 1-800.325.7540
KITWCP10
WCP
Hot Knife™ CR CutRite™ Kit
Super Value Saves Money
Kit Includes: Hot Knife, 4” and 6” Blades, 6” Groove Adapter, 3 Feet o f NWFW Wire and Case.
KITCR6G
Item #
Hot Knife
™
Kit
Description
13
6” Groove Adapter
Blades Up to 6” Wide
Hot Knife™ CR 6” Groover Plate Flat Wire, per foot
Description
CR6G NWFW
Item #
1” Groove Adapter
Blades Up to 1” Wide
Hot Knife™ CR 1” Groover Plate Flat Wire, per foot
Description
CR1G NWFW
Item #
Hot Knife™ CR Pro Kit
Everything You Need
Kit Includes: Hot Knife™, 4” and 6” Blades, 6” Groove Adapter, 3 Feet of NWFW Wire, Crimping Pliers , 6” DuraRasp™ and Canvas Bag.
KITPROCR
Item #
Hot Knife
™
Kit
Description
395.95
Price
Wire Cutting Tool
Cuts NWFW Wire
WCUT
Item #
Wire Cutting Tool
Description
52.00
Price
• Kit Includes: Wire Crimper & 10’ of NWFW Flat Wire
Crimping Tool
Precise Bends in NWFW Wire
• Quality Chrome Plated Precision
• 10’ NWFW Wire & Shaping Tool
WCP KITWCP10
Item #
Wire Shaping Tool Shaping Tool Kit
Description
CI
TOOL
CI
TOOL
WCUT
4”
• 105 Watts
• Transformer Powered
• Lightweight — Only 1 Pound
• High Quali ty Blades with
Post Mounts Not Stamped
• Spring Loaded Safety Trigger
• Blades Sold Seperately
4”
GJA3G
GJA4G
HKT450
The Original
HOT KNIFE
250 450G50
G75 G100 G75SP SPV SPSQ
STOPL
STOPS
300 550
Item #
Description
*INTERNATIONAL TOOL
TM
HOT KNIFE
14
• Horizontally Positions the Hot Knife
™
• Handles up to 4” Wide NWFW Blades
Hot Knife™ 4” Adapter Horizontal Adapter with Guide
GJA4G NWFW
Item #
225.00
10.00
Price
Adapter Flat Wire, per foot
Description
• Vertically Positions the Hot Knife
™
• Handles up to 4” Wide NWFW Blades
Hot Knife™ 4” Adapter Vertical Adapter with Guide
GJA3G NWFW
Item #
Adapter Flat Wire, per foot
Description
150.00
10.00
Price
CI
TOOL
HEATS UP TO 10” WIRE
HKT HKT250 HKT300 HKT450 HKT550 HKTG75 250 300 450 550 G50 G75 G100 G75SP SPV SPSQ STOPS STOPL CASEH CASEA HKTT HKT20
Hot Knife
™
Tool, 105 Watts Hot Knife™ Tool, w/ 2.5” Blade Hot Knife™ Tool, w/ 3.0” Blade Hot Knife™ Tool, w/ 4.5”Blade Hot Knife™ Tool, w/ 5.5”Blade Hot Knife™ w/3/4 Curved Blade
2.5” Straight Blade
3.0” Straight Blade
4.5”Straight Blade
5.5”Straight Blade 1/2” Curve Blade 3/4” Curve Blade 1” Curve Blade 3/4” Curve Blade w/ Lip 3/4” V Groove w/ Lip 3/4” Square Groove w/ Lip Short Ceramic Depth Stop Long Ceramic Depth Stop Hot Knife™ Hard Case Hot Knife™ Aluminum Case Hot Knife™ Trade In Hot Knife™ Tool, 220 Volts*
Shaping Wire Tool
• Kit Includes: Wire Crimper & 10’ of NWFW Flat Wire
Precise Bends in Flat Wire
WCP KITWCP10
Item #
Wire Shaping Tool Shaping Tool Kit
Description
20.00
105.00
Price
CASEH
CASEA
Specially Designed Head Gives Clean Crisp Corners
WCP
*INTERNATIONAL TOOL
Shape your
Own Blades
for Sculpting
Up to 10”
Plastic Hard Case Aluminum Case
www.demandproducts.com • 1-800.325.7540
ACCESSORIES
15
Hot Knife™ Kit 1
Master Kit
KITHKK KITHKKA KITHKK220
Item #
Master Hot Knife
™
Kit Kit w/ Aluminum Case Hot Knife™ Kit, 220 Volts*
Description
• Cuts both Expanded and Extruded Foam
• Cuts Fast, Clean and Accurately
• Heats Up In Seconds
• Highest Quality Blades in the Industry
• Kit Includes: Hot Knife
™
250, 300, 450, 550, G50, G75, G75SP, SPV, G100, SPSQ Blades, Long Stop, Short Stop & Hard Case
Hot Knife™ Kit 3
Horizontal Tool Buddy Adapter Kit
• Hot Knife
™
• 4
1/2
” Blade
• 2’ NWFW Wire • Carrying Case
• GJA4G Groove Jet
™
Adapter
KITHKTB4 KITHKTB4A KITHKTB204
Item #
Tool Buddy
™
Horizontal Kit Kit w/ Aluminum Case Hot Knife™ Kit,220 Volts*
Description
Hot Knife™ Kit 2
Vertical Tool Buddy Adapter Kit
KITHKTB KITHKTBA KITHKTB20
Item #
Tool Buddy
™
Vertical Kit Kit w/ Aluminum Case Hot Knife™ Kit,220 Volts*
Description
• Hot Knife
™
• 4
1/2
” Blade
• 2’ NWFW Wire • Carrying Case
• GJA3G Groove Jet
™
Adapter
Hot Knife™ Carrying Cases
Hard Shell or Aluminum
Hot Knife™ Hard Case Hot Knife™ Aluminum Case
Description
CASEH CASEA
Item #
25.00
60.00
Price
Tools Not Included
Hot Knife™ Adapter Kit
Sculpter’s Flat Wire Adapter
FWA10
Item #
Adapter
Description
56.00
Price
• Wire Adapter Posts
• Allen Wrench
• 12” NWFW Wire
• Hot Knife Sold Separately
SHAPE YOUR OWN BLADES
• GJ300 Groove Jet
™
• 10’ NWFW Flat Wire
• Carrying Case
Groove Jet™ Kit
Most Popular Grooving Kit
KITGJ3K KITGJ3KA
Item #
Groove Jet
™
w/ Hard Shell Case
Groove Jet™ w/ Aluminum Case
Description
Blade not included
17”W
5.5”H 12”D
20”W
9”H 8”D
KITGJ300
With Guide
GJASB
Aluminum Case
Plastic Hard Case
Cuts All The
Way To
Inside Corners
16
GROOVE JET
HEATS UPTO 11” WIRE
• Adapts Groove Jet
™
to Use Straight Blades
• Adapts Either Our 3”, 4
1
/2” or 51/2” Blade to the Groove Jet
Straight Blade Adapter
Fits our Groove Jet
™
GJASB 300 450 550
Item #
Straight Blade Adapter 3” Straight Blade 4
1/2
” Straight Blade
5
1/2
” Straight Blade
Description
Groove Jet™ 300 Hot Knife
Aesthetic Groove Cutter
• Weights Only 4 Lbs.
• Handles Up to 5” x 3” NWFW Blades
• Heats Up Fast
• Cuts Clean with One Pass
• Also Available in 220 Volts
• Blade Positioned Up Front
KITGJ300 NWFW
Item #
Groove Jet
™
Flat Ni-Chrome Wire-per ft.
Description
Groove Jet™ Cases
• Tools Not Included
CASEA
CASE
Item #
Aluminum Case 17” W x 5.5” H x 12” D Plastic Case 20” W x 9” H x 8” D
Description
55.00
50.00
Price
GTH02
Groove Tool Handle & Accessories
Handle, Custom Blades, Custom Inserts & Blade Kit
GTH02 GJBCUSTOM GTICUSTOM
Item #
Groove Tool Handle Custom Blade (Pkg of 3) Custom Insert (each)
Description
Blades
Handle
Inserts
Custom Blades and Base & Finish Inserts are Made to Order
*CUSTOM SIZES AVAILABLE
KITS-103 KITS-201 KITS-203
1 X
3/4
” 2 X 1” 2 X
3/4
”
Item #
Dimensions
Blades & Sled Kits
GBS-103 GBS-201 GBS-203
1 X
3/4
” 2 X 1” 2 X
3/4
”
Item #
Dimensions
Hot Knife Blades
GIS-103 GIS-201 GIS-203
1 X
3/4
” 2 X 1” 2 X
3/4
”
Item #
Dimensions
Nylon Sleds
Square Groove Tool
www.demandproducts.com • 1-800.325.7540
17
BLADES
Nylon Sleds
GIV-175 GIV-5050 GIV-7575
1 X
3/4
”
1/2
X
1/2
”
3/4
X
3/4
”
Item #
Dimensions
Blades & Sleds Kits
KITV-175 KITV-5050 KITV-7575
1 X
3/4
”
1/2
X
1/2
”
3/4
X
3/4
”
Item #
Dimensions
Hot Knife Blades
GBV-175 GBV-5050 GBV-7575
1 X
3/4
”
1/2
X
1/2
”
3/4
X
3/4
”
Item #
Length
V Groove Tool
Nylon Sleds
GIA-102 GIA-152 GIA-201
1 X
1/2
X
1/2
”
1
1/2
X
1/2
X
1/2
”
2 X 1 X 1”
Item #
Dimensions
Blades & Sleds Kits
KITA-102 KITA-152 KITA-201
1 X
1/2
X
1/2
”
1
1/2
X
1/2
X
1/2
”
2 X 1 X 1”
Item #
Dimensions
Hot Knife Blades
GBA-102 GBA-152 GBA-201
1 X
1/2
X
1/2
”
1
1/2
X
1/2
X
1/2
”
2 X 1 X 1”
Item #
Dimensions
Angled Groove Tool
Nylon Sleds
GIB-154 GIB-201
1
1/2
X
3/4
X 1”
2 X 1 X 1
3/8
”
Item #
Dimensions Price
Blades & Sleds Kits
KITB-154 KITB-201
1
1/2
X
3/4
X 1”
2 X 1 X 1
3/8
”
Item #
Dimensions Price
Hot Knife Blades
GBB-154 GBB-201
1
1/2
X
3/4
X 1”
2 X 1 X 1
3/8
”
Item #
Dimensions Price
Beveled Groove Tool
ZTC20
Comes with
One Z50 Blade
ZETZ24
Comes with
3” Z75 Blade
Cuts Carpet Clean and Fast!
Variable
Heat Control
Off/On
Trigger
#Z06 $12.90
Rounded edge to glide along cutting surface. Heat seals the edges to prevent fraying of synthetic fibers and textiles.
0.6 mm Thick 3 mm Cutting Edge
#Z40 $14.70
Wide blade back and reinforced cutting flange for stable cutting. High temperature blade is designed for heat sealing the cut edges.
0.6 mm Thick 40 mm Cutting Edge
#Z35 $17.20
Long pointed blade flanges. Ground both sides for two­directional cuts. For cutting around templates. Also for deburring.
1.0 mm Thick 35 mm Cutting Edge
#Z45 $28.90 #Z70 28.90
Curved cutting edge and thick blades. High temp blade for long cuts under pressure. *#Z70 blade for Zetz 24 only.
#Z45:0.8 mm Thick 45 mm Cutting Edge
#Z70:1.0 mm Thick 70 mm Cutting Edge
Zetz 20
™
Thermocutter
Zetz 24
™
Designed for Industrial Operations
Z50, 2” Blade Z100, 4” Blade Z200, 8” Blade
• Excellent for Cutting Rubber, Polyethylene & Polypropylene
• Electronic Circuit Board Powered
• Heats Up Quickly
• Adjustable Temperature Control
• Off-On Finger Control
• 110 Volts. Also Available in 220 Volts
• Cuts Materials Up to 5” Thick
ZTC20 Z50 Z100 Z200
Item #
Thermocutter 2” Blade (Pack of 6 Blades) 4” Blade (each) 8” Blade (each)
Description
450.00
55.80
11.40
12.90
Price
Please Note: Other Blades Available
• Excellent for Cutting Rubber, Polyethlyne & Polypropylene
• Heats Up Quickly
• Variable Heat Control
• Remote HD Transformer with Extra Long 9
1/2
Foot Cable
• 110 Volts. (Also Available in 220 Volts)
• Cuts Materials Up to 5” Thick
ZETZ24 Z75 Z120
Item #
Industrial Thermocutter 3” Blade (each) 4
3/4
” Blade (each)
Description
Please Note: Other Blades Available
18
ZETZ
ZETZ SPECIALTY BLADES
18
Hot Rod
™
Super Duty 50 Amp EPS Panel Cutter
*HR KITHRK *250 *300 *450 *550 *600CR *800 *G50 *G75 *G100 *G75SP *SPV *SPSQ *HRP10 *STOPS *STOPL
HR220
KITHRK220**
Item #
Hot Rod
™
Only, 110 Volts (60 Hertz) Hot Rod™ Kit Includes *items below 2
1/2
” Straight Blade 3” Straight Blade 4
1/2
” Straight Blade 5
1/2
” Straight Blade 5
1/2
” Straight Blade (Open Mount) 7
1/2
” Straight Blade (Open Mount) 1/2” Curve Blade 3/4” Curve Blade 1” Curve Blade 3/4” Curve Blade w/ Lip 3/4” V Groove w/ Lip 3/4” Square Groove w/ Lip Hot Rod™ Blade Adapter Short Ceramic Stop Long Ceramic Stop
Hot Rod™ Tool Only, 220 Volts
(50 / 60 Hertz)
Hot Rod™ Kit, 220 Volts
(50 / 60 Hertz)
Description
• Strongest in the Industry
• Cuts All Day Long Without Overheating
• Uses Heavy Gauge Round and Flat Wire As Well As Standard Hot Knife Blades
• Variable Heat Control — Heats Up Extremely Fast
• Remote HD Transformer with Extra Long 9 Foot Cable
• Excellent for SIP’s, ICF, EIFS or In-Plant Production Applications
• Heats From 8” to 24” of NWFW Wire
• 110 Volts. Also Available in 220 Volts
* INCLUDED IN KIT ** INTERNATIONAL TOOL
GJA3G Adapter
4” Blade Width
GJA6G Adapter 6” Blade Width
HRP02
GJA10G Adapter 10” Blade Width
HR
600CR - 5
1
/2”
250 450G50 G75 G100 G75SP SPV SPSQ
STOPL
STOPS
Cord and Handle
Hot Rod™ Replacement Cord and Handle
Hot Rod™ Blade Adapters
3 Convenient Sizes with Guides
• Excellent for SIPs, ICF or EIFS
• Great for In-Plant Production Applications
HRP02 Hot Rod™ Cord and Handle
Hot Rod™ Blade Adapter
For Flat Blade and NWFW
GJA3G GJA6G GJA10G HRP02 NWFW
Item #
4” Groove Jet
™
Adapter 6” Groove Jet™ Adapter 10” Groove Jet™ Adapter Cord and Handle Flat Ni-Chrome Wire - per ft.
Description
300 550
800 - 7
1
/2”
www.demandproducts.com • 1-800.325.7540
HOT ROD
19
HRP10
• Warms Up in 30 Seconds
• 110-Volt
• Free Standing or Table Mount
Rope Cutter II
Cuts and Fuses Nylon, Dacron, Polypropylene Line & Rope
RCUT2 RCUTP01
Item #
Rope Cutter II 2
1/4
”
2
1/4
” Replacement Blades
Description
SIP Groover SIP Panel Groove Tool
• Weighs Only 2 Lbs.
• Long HD Cord
• Heavy Commercial Construction
• Adjustable Depth Guide
SIPG114 SIPG312 SIPG412 SIPG512 SIPG714 SIPG914 SIPG1114 CASE
Item #
1
1/4
” SIP Groover Tool
3
1/2
” SIP Groover Tool
4
1/2
” SIP Groover Tool
5
1/2
” SIP Groover Tool
7
1/4
” SIP Groover Tool
9
1/4
” SIP Groover Tool
11
1/4
” SIP Groover Tool
Sip Groover Case
Description
139.00
149.00
159.00
169.00
179.00
189.00
199.00
50.00
Price
Please Note: Custom Sizes Available
HDC220
HDC 220 Power Converter
• Step-Up and Step-Down Transformer
• Converts 110V to 220V and 220V to 110V
HDC220
Item #
220 Volt Converter
Description
39.95
Price
20
CONTROLLER
Geo 8’ Foam Hot Wire Kit
Free-Hand Cutting
KITGFHWH IW100
Item #
Hot Wire Kit Inconel Chrome Wire, 100 ft.
Description
1,025.00
85.00
Price
• Hot Wire Handles
• Mag8 Controller
• From 24” to 108”
• 100 Foot Roll of Inconel Wire
• Carrying Case
www.demandproducts.com • 1-800.325.7540
21
MAXX SOLDERING GUN
HKTMX
HKTMX250
• 100 Watts of Power for Diverse Application
• 110-Volt Transformer Power Supply
• Ready to Use in 6 Seconds
• Built-in Power Light Indicator
•
Storage Case Included for Convenience and Portability
*Includes Soldering Gun, Tip, 2 1/2” Foam Cutter Blade, Cleaning Brush and Case
MAXX Soldering Gun
2 IN 1, MAXX 2 1/2” Foam Cutting Blade & Soldering Gun Hot Knife
HKTMX MXBT HKTMX250
Item #
Maxx Soldering Gun Replacement Maxx Soldering Gun Tip * Maxx Soldering Kit
Description
HKTFC
• 130 Watts
• Electronic Circuit Board Powered Cutter
• Variable Heat Control
• Post Mounted Fabric Cutter Blade
• Spring-Loaded Safety Trigger
Hot Knife Fabric Cutter Includes Tool, R Blade, Guide, Case & Cleaning Brush
Fabric Cloth Cutter Hot Knife
The Fabric Cutter Hot Knife Cuts & Seals Sail, Canvas, Cloth and other Synthetic Fabrics
HKTFC FCBR HDC220
Item #
Fabric Cutter Hot Knife, Blade, Guide Kit R Fabric Cutter Hot Knife Blade 220 Volt Power Converter
Description
HKTMXF3
HKTMXFC
3 in 1 Soldering Gun, Fabric & Foam Cutter
• Comes with 2 1/2” Foam Blade & Fabric Blade, Soldering Tip, Cleaning Brush & Case
• 110 Volts
• 100 Watts
HKTMXF3
Item #
3 in 1 Soldering Gun
Description
2 in 1 Soldering Gun, Fabric & Foam Cutter
• Case, Soldering Tip & Cleaning Brush & Fabric Blade
• 110 Volts
• 100 Watts
HKTMXFC
Item #
2 in 1 Soldering Gun/w Fabric Blade
Description
Loading...
+ 47 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use