Kawasaki FD671D User Manual

GENERAL SPECIFICATIONS

	Engine Type	Liquid cooled 4-stroke, horizontal shaft,
		OHV gasoline engine
	Cylinder Layout	90°V-Twin
	Bore x Stroke	78 x 78mm ( 3.07 x 3.07in. )
	Piston Displacement	745cm3 ( 45.5cu.in. )
	Compression Ratio	8.0 : 1
	Max.Horse Power	17.2kW ( 23.0Hp ) / 3600rpm
	Max.Torque	56.1N-m ( 41.4ft.lbs ) / 2400rpm
	Direction of Rotation	Counter-clockwise facing the PTO shaft
	Fast Idle Speed	3600rpm
	Slow Idle Speed	1550rpm
	Min.Specific Fuel	308gr / kW-hr ( 230gr / Hp-hr )
	Consumption Ratio
	Carburetor	Float type with fixed main jet
	Fuel Pump	Transistorized
	Oil Capacity	2.0litre ( 2.1US.qt. ) with Filter
	Ignition	Flywheel magneto transistor type
	Plug	NGK BPR2ES
	RFI	Per Canada and U.S.A. requirements
	Starter	Solenoid shift type electric starter
	Governor	Mechanical governor
	Lubrication	Full pressure lubrication with spin-on
		oil filter
	Air Cleaner	Dual element
	Muffler	Low tone type
	Charging Coil	12V-20A or 30A with Regulator
	Net Weight	57.0kg ( 125.7Ibs ) with Muffler
	Dimension	520 x 458 x 580mm with Muffler
	( L x W x H )	( 20.47 x 18.03 x 22.83in. )

PERFORMANCE CURVES

OUTPUT

kW Hp 20 26

24 18

22 16

20

14

18

16 12

14 10

12

8

2000

												TORQUE
													58		44
				TORQUE											42
													56
															40
													54
													52		38
													50		36
													48
															34
													46
													44		32
													N-m
															ft.lbs
					OUTPUT
MAXIMUM
	RECOMMENDED
	MAXIMUM				OUTPUT
3000									3600
ENGINE SPEED rpm

SYSTEM LUBRICATION PRESSURIZED IGNITION TRANSISTOR FULL CLEANER AIR EJECLON SYSTEM WARNING FULL 3600rpm / 0Hp).(23 2kW.17 ,3745cm

.roll times good the Let

Specifications subject to change without notice.

FD671D : DIMENSIONAL SPECIFICATIONS	Unit : mm ( in. )

	520 (20.47)
	307 (12.09)	326 (12.83)
30 (1.18)	137 (5.39)	116.5 (4.59)	116.5 (4.59)

54.5(2.15)

29.5(1.16)

164.3 (6.47)	164.3 (6.47)
80 (3.15)	80 (3.15)

183 (7.20)

54.5(2.15)

29.5(1.16)

			574(22.60)	580(22.83)											(2.81)										°
																								41.3 (1.63)	41.3 (1.63)
		81 (3.19)
		25 (0.98)										6.3 (0.25)												°	45
			(6.12)155.5									(0.98)25	313 (12.32)	235.5(9.27)	(2.30)58.4									45
																									(0.65)16.5
															71.5
		R								. 1	2	)
		.
		3							( 1
		5						. 5
		M10x1.5				2	8
		96 (3.78)			¯
		4 (0.16)
																							)
																							5
WATER DRAIN																						.7
																					(5
																			5
																		7
																		.0					D
																		6
OIL DRAIN		(0.59)																				.		30 (1.18)
																	14				.C
	62 (2.44)															¯		.00)		P				58.4 (2.30)	58.4 (2.30)
		15
	82 (3.23)																7	(5						115 (4.53)	115 (4.53)
																2
	197 (7.76)														¯	1
																								234 (9.21)	224 (8.82)
	297 (11.69)

(11.65)	432 (17.01)
296

8 -M10X1.5 DEPTH19 (0.75)

4-M8X1.25 DEPTH16 (0.63)

98.5 (3.88)		178 (7.01)
	11 (0.43)	153.4 (6.04)
8 (0.31)		89 (3.50)

12-M10x1.5 DEPTH22 (0.87)

184.2 (7.25)

160 (6.30)

92.2 (3.63)

76.2 (3.00)

52 (2.05)

184.2 (7.25)

28 (1.10)			102 (4.02)

PTO SHAFT DIMENSIONS (TAPER TYPE)

TAPER 3/16		¯22.155(0.87)
(1.38)¯35
R
2
(0	5/16 - 24UNF-2B
.
08
)	76.7 (3.02)
	92.5 (3.64)

4 (0.16)

KAWASAKI HEAVY INDUSTRIES,LTD.

Consumer Products & Machinery Company

P/N99909-2223 Printed in Japan 02-04(71)