JVC LT-29FT1BUG, AV-21FT1, LT-29FT1SUG User Manual

AV-21FT1SUG

AV-21FT1BUG

AV-29FT1SUG

AV-29FT1BUG

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

CASTELLANO

ITALIANO

PORTUGUÊS

FARBFERNSEHGERÄT

TELEVISEUR COULEUR KLEURENTELEVISIE TELEVISOR A COLOR TELEVISORE A COLORI TELEVISOR A CORES

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D'INSTRUCTIONS

GEBRUIKSAANWIJZING

MANUAL DE INSTRUCCIONES

INSTRUZIONI

INSTRUCÖES

Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

WATER AND MOISTURE

The apparatus shall not be exposed to dripping or splashing water and no object filled with liquids, such as vases , should be placed on the apparatus.

HEAT

Never place the set near heat sources. Never put a naked flame, such as a candle, on the top of TV set.

VENTILATION

Do not cover the ventilation openings in the cabinet and never place the set in a confined space such as in a bookcase or built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.

OBJECT ENTRY

Do not insert foreign objects, such as needles and coins, in the ventilation openings.

LIGHTNING STRIKE

You should disconnect the set from the mains and the aerial system during thunderstorms.

CLEANING

Unplug the set from the mains while cleaning.

AFTER MOVING THE SET

If the set is moved or turned, the MAIN POWER button must be switched off for at least 15 minutes in order to take out colour patches on the screen.

CAUTION

There is danger of choking or suffocation if the cap which is removed from the TV is accidentally swallowed by children. Store the cap out of the reach of children.

IDENTITY OF LOCAL & REMOTE CONTROL

LOCAL CONTROL

Front

MAIN POWER button

FRONT S-VIDEO INPUT socket Ext-3

B3 B4 B5 B6 B7 B8 B9 B10

(only for AV-29FT1)

FRONT VIDEO INPUT socket Ext-3 FRONT AUDIO INPUT socket Ext-3

HEADPHONE socket STAND-BY indicator REMOTE sensor

TV / AV button VOLUME UP/DOWN buttons PROGRAM UP/DOWN buttons

Rear

AERIAL socket

SCART 1 socket EXT-1

SCART 2 socket EXT-2

REMOTE CONTROL

AV-21FT1 MODEL

B1 B3 B4 B5 B6 B7 B8 B9 B10

ANT

EXT-1

EXT-2

AV-29FT1 MODEL

ENGLISH

B1 B2 B3 B4 B5 B6 B7 B8 B9 B10

(S )

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26

TV mode

SOUND MUTE

POWER

NUMBER 0..9

zoom

ZOOM / SKIP SOUND EFFECT / MOVE SLEEP / DELETE Not used

PICTURE/OK

TV > TELETEXT PICTURE / OK

MENU PROGRAM UP (CURSOR UP) PROGRAM DOWN (CURSOR DOWN) VOLUME DOWN (CURSOR LEFT) VOLUME UP (CURSOR RIGHT)

TV / AV Not used Not used Not used Not used Not used Not used Not used Not used

INFORMATION

VCR / TELETEXT / DVD switch

I/II

MODE Stereo/Mono

Dual language

I/II

A11

A15

A13

A17

A16

A20

A21

A24

A25

RM-C1514

PICTURE/OK

RM-C1514

A10

A14

A12

A18

A19

A23

A22

A26

TELETEXT mode

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10

A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26

SOUND MUTE

POWER

NUMBER 0..9 RED GREEN YELLOW CYAN TELETEXT > TV Not used

VOL / BRIGHTNESS MENU SELECTION PAGE UP PAGE DOWN VOL / BRIGHTNESS DOWN VOL / BRIGHTNESS UP Not used PAGE HOLD Not used

REVEAL DOUBLE SIZE Not used Not used

CANCEL

INDEX SUBPAGE VCR / TELETEXT / DVD switch Not used

SETTING UP

Batteries

ENGLISH

Open remote control battery compartment (at the rear) and insert two 1.5V type AA / R6 batteries.

Warning: be careful to respect battery polarities.

START UP

SWITCHING ON

Switch the TV set on with the MAIN POWER button (B1).

Insert the main plug into a 220 - 240V 50Hz AC (AV-21FT1) 230 - 240V 50Hz AC (AV-21FT1) power socket.

Connect aerial to aerial jack. It is usually connected by means of a 75 ohm cable.

LANGUAGE MENU

The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further.

The descriptions used in the menu are those of the country code (e.g. GB = English, NL = Holland etc).

PICTURE/OK

Selection is made by use of the remote control CURSOR UP (A11) / CURSOR DOWN (A12) buttons and CURSOR LEFT (A13) / RIGHT (A14) buttons. Once you are satisfied with your selection, push the OK button (A9) to confirm your choice, and then the menu will disappear. The language entered at this stage can still be modified at any later time, by entering the LANGUAGE selection (accessed from the FEATURES menu page 9).

Note : The languages shown are subject to modification without prior notice.

INSTALLATION

AUTO TUNING SYSTEM

MENU SELECTION

Press remote control MENU button (A10) to display the MAIN MENU.

Move the cursor to INSTALL by using the remote control CURSOR

PICTURE SOUND

UP (A11),DOWN(A12) buttons.

Then press the remote control OK button (A9).

Note: All menus are removed within 60 seconds if you don't press

INSTALL

FEATURES

any button.

COUNTRY SELECTION

Position the cursor at ATSS Menu and select country code where TV is

used by pressing the remote control CURSOR LEFT (A13), RIGHT(A14) buttons.

The following countries can be selected.

A, B, CH, CZ, D, DK

E, F, FIN, GB, H, I,

ATSS

EDIT

SYSTEM

CHANNEL

FREQUENCY

NAME

PROGRAM

STORE TO

INSTALL

C 31

551.25

BBC1

IRL, N, NL, PL, S, Others

ATSS - Auto Tuning and Sorting System

After selecting country code, press and hold OK button for 3 - 4 seconds until "Please wait!" is displayed, then auto program tuning starts searching all the available TV stations in your area. When auto tuning and sorting is completed, the EDIT menu with the recorded programs appears on the screen.

To exit the EDIT menu, press MENU button 3 times, then the menu display will disappear from TV screen. Now you can select program using the remote control UP (A11) or DOWN (A12) buttons.

ENGLISH

EDIT MENU

The EDIT menu shows you the programme position assignment. When using the AUTO TUNING method, the broadcasts may not be found and stored in the order you desired. For example, BBC1 may not be allocated to programme number 01, and BBC2 may not be allocated to programme number 02, etc. The EDIT menu enables you to change the programme position assignment according to your personal preference.

To reach the EDIT menu you have to first select INSTALL menu from the MAIN menu.

CHANGING ORDER OF CHANNELS

Position the cursor to the programme number you want to move and press the remote control GREEN (A5) MOVE button. The programme turns to red colour. Then use the UP (A11) or DOWN (A12) buttons to move the programme number you wish to store it to and press MOVE button again to confirm the operation. Press MENU to return to INSTALL menu.

DELETE PROGRAMME POSITION DATA

Position the cursor to the programme number you wish to delete using the remote control UP (A11) or DOWN (A12) buttons. Press the YELLOW/DELETE (A6) button.

The delete programme is instantly moved to programme N° 99. The programme which was located at N° 99 will automatically move to N° 98.

NAME

CH 4

S4C

CH 4

ITV

BBC 2

BBC 1

-----

PICTURE/OK

C46

C39

C05

C31

C34

C37 C21

PICTURE/OK

EDIT

SKIP

+ 10 hidden pages