JVC KW-AVX708, KW-AVX700 Instructions Manual

ENGLISH

中

文

DVD RECEIVER WITH MONITOR KW-AVX708/KW-AVX700

配備屏幕的

DVD

接收機

KW-AVX708/KW-AVX700

For installation and connections, refer to the separate manual.

有關安裝和連接方法，分別參閱操作手冊。

INSTRUCTIONS

使用說明書

LVT1469-010B

[UF]

MODE MENU

ASPECT

ZOOM

ATT

SOURCE

DISC

+

DISC

–

DVD / RECEIVER CONTROL

EXTRA MONITOR CONTROL

+10

–10

123

456

7809

–100

BAND

OSD

MENUTOP M

SETUP

RM-RK240

RETURN

ENTER

DUAL

SHIFT

VOL

2nd VOL

+100

DIRECT

ASPECT

SURROUND

All manuals and user guides at all-guides.com

all-guides.com

ENGLISH

2

How to reset your unit

• Your preset adjustments will also be erased.

For safety...

• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.

• Stop the car before performing any
complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

How to forcibly eject a disc

• If this does not work, reset the unit.

NO EJECT?

EMERGENCY EJECT?

NO EJECT?

EMERGENCY EJECT?

All manuals and user guides at all-guides.com

ENGLISH

3

WARNINGS:
To prevent accidents and damage

• DO NOT install any unit in locations where;
– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety devices

such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

If you need to operate the unit while driving, be

sure to look ahead carefully.

• The driver must not watch the monitor while
driving.

CONTENTS

Introduction ............................................. 4

•

Before operating the unit ............................... 5

OPERATIONS

Basic operations

• Control panel ............................................. 7

•

Remote controller (RM-RK240) ......................... 8

Listening to the radio ................................ 10

Disc operations ......................................... 13

Dual Zone operations ................................ 24

SD operations ........................................... 27

EXTERNAL DEVICES

Listening to the CD changer ....................... 29

Listening to the iPod®/D. player ................. 31

Listening to other external components ..... 32

SETTINGS

Sound equalization ................................... 33

Assigning titles to the sources .................... 34

Menu operations ...................................... 35

Maintenance ............................................ 43

More about this unit ................................. 44

Troubleshooting ....................................... 47

Specifications ........................................... 50

Cautions on the monitor:

• The monitor built in this receiver has
been produced with high precision, but
it may have some ineffective dots. This is
inevitable and is not malfunction.

• Do not expose the monitor to direct
sunlight.

• Do not touch the surface of the liquid
crystal panel directly.

• When the temperature is very cold or very
hot...
– Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or

may move slowly. Pictures may not
be synchronized with the sound or
picture quality may decline in such
environments.

This product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Macrovision, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.

<MENU> language

In this manual, English is used as the
<MENU> language for explanation
purposes. You can change the <MENU>
language to Chinese using the “Language”
setting (☞ page 37).

• Once you have selected Simplified Chinese
or Traditional Chinese, Chinese folder/file
names and tag data can be displayed on the
built-in monitor.

All manuals and user guides at all-guides.com

ENGLISH

4

Introduction

Notice for DualDisc playback

The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product is not
recommended.

Disc type Recording format, file type, etc. Playable

DVD DVD Video

DVD Audio

DVD-ROM

DVD Recordable/Rewritable
(DVD-R*1/-RW, +R/+RW*2)

• Compliant to UDF bridge format

• DVD-RAM cannot be played.

DVD Video

MPEG1/MPEG2

JPEG

MP3/WMA/WAV

DivX/MPEG4

DVD-VR, +VR

Dual Disc DVD side

Non-DVD side

CD/VCD Audio CD/CD Text (CD-DA), DTS-CD

VCD (Video CD)

SVCD (Super Video CD)

CD-ROM

CD-I (CD-I Ready)

CD Recordable/Rewritable
(CD-R/-RW)

• Compliant to ISO 9660 level 1,
level 2, Romeo, Joliet

CD-DA

MPEG1/MPEG2

JPEG

MP3/WMA/WAV

DivX/MPEG4

Caution on volume setting:

Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.

*

1

DVD-R recorded in multi-border format is also playable (except for dual layer discs).

*

2

It is possible to play back finalized +R/+RW (Video mode only) discs. However, the use of +R double layer disc is not recommended.

• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries.

All manuals and user guides at all-guides.com

ENGLISH

5

Setup

Disc Surround
Equalizer
Sound
Mode
List

Display
Clock
Disc Setup 1
Disc Setup 2
Tuner
Input

MENU

Before operating the unit—Set the clock

~ Turn on the power.
Ÿ Display the <MENU>.
! Select <Setup> ]<Clock>.

Note on Region Code:

DVD players and DVD Video discs have
their own Region Code numbers. This unit
can only play back DVD discs whose Region
Code numbers include “6.”

If you insert a DVD Video disc of an
incorrect Region Code

“Region Error Please Eject” appears on the
monitor.

Continued on the next page

⁄ Display the <Clock> menu.

@ Select <Time Set>, then activate the

<Time Set> screen.

Display
Clock
Disc Setup 1
Disc Setup 2
Tuner
Input

Display

Clock

Disc Setup 1
Disc Setup 2
Tuner
Input

Time Set
12Hours/24Hours

Setup

Disc Surround
Equalizer
Sound
Mode
List

Time Set

12Hours/24Hours

1:00 AM

• See also page 35.

Time Set

12Hours/24Hours

1:00 AM

All manuals and user guides at all-guides.com

ENGLISH

6

¤ Set the clock time.

# Return to the <Clock> menu.

‹ Select <12Hours/24Hours>.

Time Set

12Hours/24Hours

12 Hours

24 Hours

Time Set

12Hours/24Hours

1:00 AM

Time Set

12Hours/24Hours

3:45 PM

Time Set

12Hours/24Hours

3:45 PM

$ Activate the <12Hours/24Hours> screen.

› Select either the 12-hour or 24-hour

system.

% Finish the procedure.

Time Set

12Hours/24Hours

12 Hours
24 Hours

All manuals and user guides at all-guides.com

all-guides.com

ENGLISH

OPERATIONS

7

Basic operations — Control panel

• TUNER: Select the bands.

• DISC: Stop playing.

• On menus: Back.

Select the source.

TUNER = DISC (DVD/VCD/CD) = SD =CD-CH, iPod,
D.PLAYER, or EXT-IN = AV-IN =(back to the beginning)

• You cannot select these sources if they are not
ready.

Display window

Open and close the monitor panel.

• When the monitor panel is open, you can
insert a disc and an SD card.

*1 <MENU> screens

You can use the menus to set up various settings.
The <MENU> screen consists of the following
sub-menus—Setup/Disc Surround/Equalizer/Sound/
Mode/List/DualZone.

• For details, see pages 35 to 42.

• You can also change the <MENU> language
to either Simplified Chinese or Traditional
Chinese. See “Language” on pages 37.

• Turn on the power.

• Turn off the power [Hold].

• Attenuate the sound (if the power is on).

Change the display
information.

• TUNER: Search for stations.

• DISC: Select chapters/tracks.

• On menus: Select items.

• iPod/D.PLAYER: Select tracks.

Change the monitor panel angle.

Remote sensor

Adjust the volume.

Reset the unit.

• Use only when the internal
system malfunctions.

Display or erase <MENU>*1.

• DISC: Start playing.

• On menus: Enter.

All manuals and user guides at all-guides.com

8

ENGLISH

MONITOR CONTROL

1 Monitor control buttons

• Used for a JVC monitor—KV-MR9010,
or KV-MH6510.

DVD/RECEIVER CONTROL

2 • Turns on the power.

• Attenuates the sound if the power is on.

• Turns off the power if pressed and held
(while the power is on).

3 Selects the source.
4 Selects the FM/AM bands.
5 Changes the aspect ratio of the playback

pictures.

6 Activates or deactivates Dual Zone.
7 Adjusts the volume level.

• Also functions as 2nd VOL button when
pressed with SHIFT button (☞ page 24)

.

8*1 • DVD: Shows the disc menu.

• VCD: Resumes PBC playback
(☞page 19).

Basic operations — Remote controller (RM-RK240)

Installing the lithium coin battery (CR2025)

Before using the remote controller:

• Aim the remote controller directly at the
remote sensor on the unit.

• DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).

Warning:
To prevent accidents and damage

• Do not install any battery other than

CR2025 or its equivalent.

• Store the battery in a place where children

cannot reach.

• Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.

• Do not leave the battery with other

metallic materials.

• Do not poke the battery with tweezers or

similar tools.

• Wrap the battery with tape and insulate

when throwing away or saving it.

IMPORTANT:

If Dual Zone is activated (☞ page 24),
the remote controller functions only for
operating the DVD/CD player.

Main elements and features

MODE MENU

ASPECT

ZOOM

ATT

SOURCE

DISC

+

DISC

–

DVD / RECEIVER CONTROL

EXTRA MONITOR CONTROL

+10

–10

123

456

7809

–100

BAND

OSD

MENUTOP M

SETUP

RM-RK240

RETURN

ENTER

DUAL

SHIFT

VOL

2nd VOL

+100

DIRECT

ASPECT

SURROUND

All manuals and user guides at all-guides.com

ENGLISH

OPERATIONS

9

9*1 Not used as SETUP button for this

receiver.

p SHIFT button
q 7 (stop), 3 (play), 8 (pause)

• 3 (play) also function as ZOOM button
when pressed with SHIFT button (☞
page 20).

•

Not applicable for CD changer operations.

w*2 For advanced disc operations:

• 5 / ∞

DVD: Selects the titles.

Other discs except CD: Selects the
folders.

• 4 / ¢: reverse skip/forward skip

• 1 / ¡: reverse search/forward
search

For FM/AM tuner operations:

• 5 / ∞:

Changes the preset stations.

• 4 / ¢:

– Functions to search for stations.
Press briefly: auto search
Press and hold: manual search

For Apple iPod

®

/JVC D. player

operations:

• ∞: Pauses/stops or resumes playback.

• 5: Enters the main menu (then
5/∞/4 / ¢ work as the menu
selecting buttons).*

3

• 4 / ¢ (in menu selecting mode)

– Selects an item if pressed briefly. (Then,

press ∞ to confirm the selection.)

– Skips 10 items at a time if pressed and

held.

e Shows the on-screen bar.

• Also functions as DIRECT button when
pressed with SHIFT button (☞ pages 18
to 20).

r*

1

• DVD: Shows the disc menu.

• VCD: Resumes PBC playback
(☞page 19).

t*

1

• Makes selection/settings.

• ~: Skips back or forward by 5 minutes
for MPEG.

• DISC +/– buttons: Changes discs for
“CD-CH.”

y*1 RETURN button
u • DVD: Selects audio language

(

), subtitles ( )*1, angle ( ).

• VCD: Selects audio channel (

).

•

(angle) also functions as
SURROUND button when pressed with
SHIFT button (☞page 21).

*

1

Functions as number buttons when pressed

with SHIFT button.

–

TUNER: Selects preset station.

–

DISC: Selects chapter/title/group/folder/

track.

*

2

Functions as +10/–10/+100/–100 buttons

when pressed with SHIFT button.

*

3

5 : Returns to the previous menu.

∞ : Confirms the selection.

How to select a number

To select a number from 0 – 9:

To select a number greater than 9:

• +100/–100 buttons used only for searching
for tracks whose number is greater than 99.

All manuals and user guides at all-guides.com

10

ENGLISH

FM1 P1
ABC Radio

87.5 MHz

TUNER

3: 45 PM

FLAT

POWER]ON

87.5 MHz ABC Radio

88.3 MHz DEF FM

88.7 MHz GHI Radio

91.5 MHz JVC FM

93.1 MHz JKL Radio

95.3 MHz MNO FM

MO LO

When an FM stereo broadcast is hard to
receive

1

2

3

Listening to the radio

~ Select “TUNER.”
Ÿ Select the bands.

! Search for a station—Auto Search.

• Manual Search: Hold either to left or right until “Manual Search” appears on the display, then
push it repeatedly.

• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal
strength.

4

Reception improves, but stereo effect will be

lost.

• The MO indicator lights up.

To restore stereo effect, select “Off” in step 4.

Assigned station name. If no name is assigned,
“NO NAME” appears.

Preset No.

Band

☞ page 33.

Tuner indicators

Setup

Disc Surround
Equalizer
Sound
Mode
List

Setup
Disc Surround
Equalizer
Sound

Mode

List

Off

On

Preset list—frequency/
assigned station names

Mono

DX/Local
SSM
Title Entry

All manuals and user guides at all-guides.com

ENGLISH

OPERATIONS

11

FM station automatic presetting —SSM
(Strong-station Sequential Memory)

This function works only for FM bands.
You can preset six stations for each band.

1

2

3

4

Local FM stations with the strongest signals
are searched and stored automatically in the
FM band.

Tuning in to stations with sufficient signal
strength

This function works only for FM bands.
Once you have activated this function (selected
“Local”), it always works when searching for FM
stations.

1

2

3

4

Only stations with sufficient signal strength

will be detected.

• The DX indicator goes off, then the LO
indicator lights up.

Mono

DX/Local

SSM
Title Entry

Setup

Disc Surround
Equalizer
Sound
Mode
List

Setup
Disc Surround
Equalizer
Sound

Mode

List

DX

Local

Setup

Disc Surround
Equalizer
Sound
Mode
List

Setup
Disc Surround
Equalizer
Sound

Mode

List

Mono
DX/Local

SSM

Title Entry

All manuals and user guides at all-guides.com

all-guides.com

12

ENGLISH

Selecting preset stations

On the remote:

1
2

or

On the unit:

1

2

• Preset List can also be accessed through
<MENU> = <List>.

Setup

Disc Surround
Equalizer
Sound
Mode
List

Setup
Disc Surround
Equalizer
Mode

List

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset

number 4 of the FM1 band.

1

2

3

• Each time you keep pushing up or down
the knob, you can change the FM bands.

• Preset List can also be accessed through
<MENU> = <List> (☞ right).

4

Select a preset number.

5

87.5 MHZ

88.3 MHz

88.7 MHz

91.5 MHz

93.1 MHz

95.3 MHz

FM1
NO NAME

92.5 MHz

FM1 P4
NO NAME

92.5 MHz

87.5 MHZ

88.3 MHz

88.7 MHz

91.5 MHz

93.1 MHz

95.3 MHz

All manuals and user guides at all-guides.com

ENGLISH

OPERATIONS

13

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic
start depends on its internal program).

If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the
source or eject the disc.

If “

” appears on the monitor, the unit cannot accept the operation you have tried to do.

• In some cases, without showing “

,” operations will not be accepted.

Now Reading...

DISC

3: 45 PM

Label side

To open/close the
monitor panel

To eject the disc

3: Start playback if necessary.

(For DVD: 10-second review if pressed during play.)

DISP: Press if no playback picture appears , but disc
information (☞ pages 14 and 15) screen is displayed.

Open the monitor panel and insert the disc.

Playback starts automatically.

7: Stop.

Caution:

Do not place your finger behind the

monitor panel.

All manuals and user guides at all-guides.com

14

ENGLISH

While playing the following discs, press .

01 01 0:00:12

48kHz 24Bit 3/2.1

DVD

VIDEO

MULTI

L C R
SW LFE
LS RS

DIGITAL

CHAP.RPT

3: 45 PM

Press: Select chapter
Hold: Reverse/forward search*

1

Surround/

sound mode

Audio format

Title no./Chapter no./Play time

Sampling frequency/Bit rate/Recorded
signal channels

Press: Select track
Hold: Reverse/forward search*

1

Playback mode

Group no./Track no./Play time

01 01 0:00:12

96kHz 24Bit 3/2.1

DVD

AUDIO

3: 45 PM

MULTI

L C R
SW LFE
LS RS

PPCM

BONUS B.S.P

REPEAT

Press: Select track
Hold: For MPEG: Reverse/forward

search*

2

01 01 0:00:12
Current folder Name
Current file name.mpg

Next file name.mpg
Next file name.mpg
Next file name.mpg
Next file name.mpg
Next file name.mpg
Next file name.mpg

CD

MPEG

3: 45 PM

FLAT

REPEAT

L R
SW
LS RS

Press: Select folder
Hold: Display Folder List

Disc type

• Each time you press the button, playback
picture and disc information screens
(with/without level meter) appear in turn.

01 0:00:12

VCD

PBC

3: 45 PM

FLAT

L R
SW
LS RS

Press: Select track
Hold: Reverse/forward search*

1

Track no./Play time

Press: Select group

Speaker/signal

indicators

(☞ page 44)

Press: Select title

PBC indicator

lights up when

PBC is in use.

BONUS indicator

(☞ page 20)

B.S.P. indicator

(☞ page 20)

For MPEG: Folder no./Track no./Play time
For JPEG: Folder no./Track no.

All manuals and user guides at all-guides.com

ENGLISH

OPERATIONS

15

Track no./Play time

Next track list (only for CD Text)

01 0:00:12
Disc Title
Current track Title

Next track title
Next track title
Next track title
Next track title
Next track title
Next track title

CD

3: 45 PM

FLAT

L R
SW
LS RS

REPEAT

• “NO NAME” appears if no title is assigned
or recorded.

Folder no./Track no./Play time

01 01 0:00:12
Current folder Name
Current file name.mp3

Next file name.mp3
Next file name.mp3
Next file name.mp3
Next file name.mp3
Next file name.mp3
Next file name.mp3

CD

FLAT

MP3

REPEAT

3: 45 PM

L R
SW
LS RS

• Tag data will be shown instead of folder/
file names when they are recorded (with
“Tag Display” set to “On” ☞ page 36).

Press: Select track
Hold: Reverse/forward search*

1

Press: Select track
Hold: Reverse/forward search*

1

Press: Select folder
Hold: Display Folder List

Audio format

(MP3/WMA/WAV)

*

1

Search speed: x2 ] x10.

*

2

Search speed: ¡1 ] ¡2.

• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.

All manuals and user guides at all-guides.com

16

ENGLISH

You can use only one of the following playback
modes—Intro/Repeat/Random.
Ex. To select Track Repeat

1

2

3

4

When one of the playback modes is

selected, the corresponding indicator lights
up on the disc information screen.

To cancel, select “Off” in step 3 or 4.

Selecting playback modes

Setup

Disc Surround
Equalizer
Sound
Mode
List

Setup
Disc Surround
Equalizer
Sound

Mode

List

Off
Intro

Repeat

Random

Disc type Intro Repeat Random

—

Chapter: Repeats current

chapter

Title: Repeats current title

—

— Track: Repeats current track —

Track: Plays the first 15

seconds of each track (for
VCD: PBC not in use)

Track: Repeats current track

(for VCD: PBC not in use)

Disc: Randomly plays all tracks

(for VCD: PBC not in use)

Track: Plays the first 15

seconds of each track

Folder: Plays the first 15

seconds of the first track of
each folder

Track: Repeats current track
Folder: Repeats all tracks of the

current folder

Folder: Randomly plays all

tracks of current folder,
then tracks of next folders

Disc: Randomly plays all tracks

—

Track: Repeats current track
Folder: Repeats current folder

—

—

Folder: Repeats current folder

—

Off

Track

Folder

All manuals and user guides at all-guides.com

all-guides.com

ENGLISH

OPERATIONS

17

Selecting tracks on the list

If a disc includes folders, you can display the
Folder/Track Lists, then start playback.

1

Folder List with the current
Track List on the right column
appears.

2

Select a folder, then activate the Track

List.

3

Select a track, and start playing.

• Preset List can also be accessed through

<MENU> = <List>.

Setup

Disc Surround
Equalizer
Sound
Mode
List

Setup
Disc Surround
Equalizer
Mode

List

Track001.mp3
Track002.mp3
Track003.mp3
Track004.mp3
Track005.mp3
Track006.mp3

My Best

Cinema
My Best 2
Pops
Favorite Songs
Easy Listenings

My Best
Cinema
My Best 2
Pops

Favorite Songs

Easy Listenings

Song015.mp3
Song016.mp3
Song017.mp3

Song018.mp3

Song019.mp3
Song020.mp3

Prohibiting disc ejection

You can lock a disc in the loading slot.

1

2

“No Eject” appears.

To cancel the prohibition, repeat the same
procedure to select “EJECT OK”.

NO EJECT?

EMERGENCY EJECT?

All manuals and user guides at all-guides.com