JVC KD-DV4406, KD-DV4405 Instructions Manual

DVD/CD RECEIVER

For canceling the display demonstration, see page 5.

KD-DV4406/KD-DV4405

For installation and connections, refer to the separate manual.

INSTRUCTIONS

GET0511-005A

[A]

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

WARNINGS:

[European Union only]

This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be authorized
by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

(To prevent accidents and damage)

• DO NOT install any unit or wire any cable in
a location where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

• If you need to operate the unit while
driving, be sure to look around carefully.

• The driver must not watch the monitor
while driving.

If the parking brake is not engaged,

“DRIVER MUST NOT WATCH THE MONITOR
WHILE DRIVING.” appears on the monitor,
and no playback picture will be shown.

– This warning appears only when the

parking brake lead is connected to the
parking brake system built in the car
(refer to the Installation/Connection
Manual).

If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.

2

How to reset your unit

CONTENTS

INTRODUCTIONS

Playable disc type ........................................ 4

Preparation .................................................. 5

OPERATIONS

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

How to use functions mode

If you press M MODE, the unit goes into functions mode,
then the number buttons and 5/∞ buttons work as
different function buttons.

[Within 5 seconds...]

Basic operations

• Using the control panel ............................... 6

• Using the remote controller (RM-RK252) .... 7

Listening to the radio ................................... 10

Disc operations ............................................. 11

• Operations using the control panel ............. 12

• Operations using the remote controller

(RM-RK252) ................................................ 14

EXTERNAL DEVICES

Listening to the CD changer ......................... 20

Listening to the iPod .................................... 21

Listening to the other external

components .............................................. 22

SETTINGS

Selecting a preset sound mode .................... 23

Caution on volume setting

Discs produce very little noise compared with other
sources. Lower the volume before playing a disc to
avoid damaging the speakers by the sudden increase of
the output level.

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard. Therefore,
the use of Non-DVD side of a DualDisc on this product
may not be recommended.

General settings — PSM ............................. 24

Disc setup menu ........................................... 26

Title assignment .......................................... 28

REFERENCES

More about this unit .................................... 28

Maintenance ................................................ 34

Troubleshooting ........................................... 35

Specifications ............................................... 38

3

Playable disc type

Disc type Recording format, file type, etc Playable

DVD DVD-Video (Region Code: 4) *

DVD-Audio

DVD-ROM

DVD Recordable/Rewritable
(DVD-R/-RW *

2

, +R/+RW *3)

DVD-Video

DVD-VR

• DVD Video: UDF bridge

• DVD-VR

• DivX/MPEG-1/MPEG-2/MP3/
WMA/WAV: ISO 9660 level 1,

DivX/MPEG1/MPEG2

MP3/WMA/WAV

AAC

level 2, Romeo, Joliet

JPEG/MPEG4

DVD+VR

DVD-RAM

Dual Disc DVD side

Non-DVD side

1

CD/VCD Audio CD/CD Text (CD-DA)/DTS-CD *

4

VCD (Video CD)

SVCD (Super Video CD)

CD-ROM

CD-I (CD-I Ready)

CD Recordable/Rewritable
(CD-R/-RW)

CD-DA

VCD (Video CD)

• ISO 9660 level 1, level 2, Romeo,
Joliet

DivX/MPEG1/MPEG2

MP3/WMA/WAV

AAC

JPEG/MPEG4

1

If you insert a DVD Video disc of an incorrect Region Code, “REGION CODE ERROR” appears on the monitor.

*
*2 DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not

playable.

*3 It is possible to play back finalized +R/+RW (Video format only) discs. +RW double layer discs are not playable.
*4 To reproduce DTS sound, use the DIGITAL OUT terminal (see also pages 27 and 32).

4

Preparation

Cancel the display demonstration and set the clock

• See also page 24.

1

2

3

4

Turn on the power.

Enter the PSM settings.

Cancel the display demonstrations

Select “DEMO,” then “DEMO OFF.”

Set the clock

Select “CLOCK HOUR,” then adjust the hour.
Select “CLOCK MIN” (minute), then adjust the minute.

Finish the procedure.

When the power is turned off: Check the current clock time
When the power is turned on: Change the display information

Indication language:

In this manual, English indications are used for purposes of explanation. You can select the indication language
on the monitor on the “LANGUAGE” setting (see page 26).

Detaching the control panel Attaching the control panel

5INTRODUCTIONS

Basic operations

Using the control panel

1 • FM/AM: Select preset station.

• DISC: Select title/program/playlist/folder.

• IPOD: Enter the main menu/Pause playback/
Confirm selection.

2 Eject disc.
3 • Turn on the power.

• Turn off the power [Hold].

• Attenuate the sound (if the power is on).

4 Volume control [Turn].
5 Remote sensor
6 • FM/AM: Select the band.

• DISC: Start/pause playback.

7 Loading slot
8 Display window
9 Select the sound mode.
p Change the display information.
q Detach the panel.
w Select the source.

FM/AM = DISC * = CD-CH */IPOD * (or EXT IN)

= AUX IN = (back to the beginning)

e • FM/AM: Search for station.

• DISC/CD-CH: Select chapter/track.

• IPOD: Select track.

r • Adjust the sound mode.

• Enter the PSM settings [Hold].

t Enter functions mode.

• Press M MODE, then one of the following buttons
(within 5 seconds)...

MO : Turn on/off monaural reception.
SSM : Automatic station presetting [Hold].
RPT : Select repeat play.
RND : Select random play.
5/∞ : Skip 10 chapters/tracks.

y • FM/AM: Select preset station.

• DISC/CD-CH: Select chapter/title/program/
folder/track/disc (for CD changer).

u AUX (auxiliary) input jack

* You cannot select these sources if they are not ready or

not connected.

6

Display window

1 Tr (track) indicator
2 Source display / Track number / Folder number /

Disc number / Title number / PBC indicator / Time
countdown indicator

3 Playback source indicators—CH (CD changer), DISC
4 Sound mode (c-EQ: custom equalizer) indicators

—CLASSIC, HIP HOP, JAZZ, ROCK, POPS, USER

5 Playback mode / item indicators— RND (random),

6 Tuner reception indicators—ST (stereo),

MO (monaural)

7 LOUD (loudness) indicator
8 EQ (equalizer) indicator
9 Disc information indicators—

TAG (Tag information), (folder), (track/file)

p Main display (Time, menu, playback information)

(disc), (folder), RPT (repeat)

Using the remote controller (RM-RK252)

Installing the battery

R03/LR03/AAA

• If the effectiveness of the remote controller
decreases, replace both batteries.

Before using the remote controller:

• Aim the remote controller directly at the remote
sensor on the unit.

• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).

Insert the batteries into the remote controller by
matching the polarity (+ and –) correctly.

Caution:

Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.

Continued on the next page

7OPERATIONS

1 button

• Turns the power on if pressed briefly or
attenuates the sound when the power is on.

• Turns the power off if pressed and held.

2 5/∞ buttons

• FM/AM: Selects the preset stations.

• DISC:

– DVD-Video: Selects the title.
– DVD-VR: Selects the program/playlist.
– DivX/MPEG Video/MP3/WMA/WAV: Selects

the folders if included.

• IPOD:

–

5 : Enters the main menu (then 5 / ∞ /

4 / ¢ work as menu

selecting buttons.)
5 : Returns to the previous menu.
∞ : Confirms the selection.
– ∞ : Pauses or resumes playback.

4 / ¢ buttons

• FM/AM:
– Searches for stations automatically if pressed

briefly.

– Searches for stations manually if pressed and

held.

• DISC:
– Reverse skip/forward skip if pressed briefly.
– Reverse search/forward search if pressed and

held.

• IPOD:
– Reverse skip/forward skip if pressed briefly.
– Reverse search/forward search if pressed and

held.
In menu selecting mode:
– Selects an item if pressed briefly. (Then, press

∞ to confirm the selection.)

– Skips 10 items at a time if pressed and held.

8

3 VOL (volume) + / – buttons

• Adjusts the volume level.

2nd VOL (volume) buttons

• Not applicable for this unit.

4 * ASPECT button

• Not applicable for this unit.

5 PHONE button

• Not applicable for this unit.

6 * SETUP button

• Enters disc setup menu (during stop).

7 * TOP M (menu) button

• DVD-Video/DivX: Shows the disc menu.

• DVD-VR: Shows the Original Program screen.

• VCD: Resumes PBC playback.

8 * OSD (on-screen display) button

• Shows the on-screen bar.

9 SHIFT button

• Functions with other buttons.

p DISP (display) button

• Changes the display information.

q 1 / ¡ buttons

• DVD-Video/VCD: Slow motion playback (during
pause).

• DivX/MPEG Video/MP3/WMA/WAV: Reverse
search/forward search.

w SOURCE button

• Selects the source.

e 3 (play) / 8 (pause) button

• DISC: Starts/pauses playback.

u * % / fi buttons

• DVD-Video: Makes selection/settings.

• CD-CH: Changes discs in the magazine.

@ / # buttons

• DVD-Video: Makes selection/settings.

• DivX/MPEG Video: Skips back or forward by
about five minutes.

ENT (enter) button

• Confirms selection.

i * DUAL button

• Not applicable for this unit.

o SURROUND button

• Not applicable for this unit.

DIRECT button

• DISC: Enters direct search mode for chapter/
title/program/playlist/folder/track when pressed
with SHIFT button (see page 14 for details).

CLR (clear) button

• DISC: Erases the misentry when pressed with
SHIFT button.

r (end call) button

• Not applicable for this unit.

BAND /

7 (stop) buttons

• FM/AM: Selects the bands.

• DISC: Stops playback.

t * RETURN button

• VCD: Returns to the PBC menu.

y * MENU button

• DVD-Video/DivX: Shows the disc menu.

• DVD-VR: Shows the Playlist screen.

• VCD: Resumes PBC playback.

* Functions as number buttons/

(asterisk)/# (hatch)

*

when pressed with SHIFT button.

– FM/AM: Selects the preset stations (1 – 6).
– DISC: Enters chapter/title/program/playlist/

folder/track number after entering search
mode by pressing SHIFT and DIRECT (see
page 14 for details).

9OPERATIONS

Listening to the radio

1

2

3

Select “FM/AM.”

Select the bands.

Search for a station to listen—Auto Search.

Manual Search: Hold either one of the buttons until “M” flashes on the display, then press
it repeatedly.

• When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up
on the display.

Change the display information.

Clock = Station name * =
Frequency = (back to the beginning)

• If no title is assigned to a station,
“NO NAME” appears. To assign a title
to a station, see page 28.

FM station automatic presetting

— SSM (Strong-station Sequential
Memory)

You can preset up to six stations for each band.

1 While listening to an FM station...

When an FM stereo broadcast is

hard to receive

Reception improves, but stereo effect will be lost.

• “MO” lights up on the display.

To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.

2

Local FM stations with the strongest signals are

searched and stored automatically in the selected
FM band.

Manual presetting

Ex.: Storing FM station of 92.50MHz into preset number

4 of the FM1 band.

1

2

10

3

To listen to a preset station

Preset number flashes for a while.

or

Disc operations

Before performing any operations...

Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other
discs by referring to the monitor screen. (See pages 16 – 19.)
The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its
internal program).
If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or
eject the disc.

If “ ” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to
do.

• In some cases, without showing “ ,” operations will not be accepted.

1

2

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Insert the disc.

Playback starts automatically.

Start playback if necessary.

To stop play and eject the disc

• Press SRC to listen to another playback source.

Continued on the next page

11OPERATIONS

Change the display information.

Current chapter number and Elapsed playing time = Current chapter number and Clock = Current
title and chapter number = (back to the beginning)

Current chapter number and Elapsed playing time = Current chapter number and Clock = Current
program (or playlist) number and chapter number = (back to the beginning)

Elapsed playing time = Folder number and Clock = Folder name = Track title = (back to the
beginning)

Current track number and Elapsed playing time = Current track number and Clock = (back to the
beginning)

Current track number and Elapsed playing time = Current track number and Clock = Album name/
performer (folder name *

1

) = Track title (file name *1) = (back to the beginning)

Current track number and Elapsed playing time = Current track number and Clock = Disc title/
performer *2 = Track title *2 = (back to the beginning)

Operations using the control panel

Pressing (or holding) the following buttons allows you to...

Disc type

[Press] Select chapter
[Hold] Reverse/fast-forward

chapter *

3

[Press] Select chapter
[Hold] Reverse/fast-forward

chapter *

3

[Press] Select track
[Hold] Reverse/fast-forward track *

[Press] Select track
[Hold] Reverse/fast-forward track *

[Press] Select track
[Hold] Reverse/fast-forward track *

Select title During stop: Locate title

Select program number/
playlist number

Select folder Locate particular folder directly

4

3

Select folder Locate particular folder directly

3

—

(Number buttons) *

5

During play/pause: Locate
chapter

During stop: Locate program
During play/pause: Locate
chapter

Locate particular track directly
(PBC not in use)

[Press] Select track
[Hold] Reverse/fast-forward track *

12

3

—

Locate particular track directly

After pressing M MODE, press the following buttons to...

Disc type

Skip 10 chapters (during
play or pause)

Skip 10 chapters (during
play or pause)

Skip 10 tracks (within the
same folder)

Skip 10 tracks (PBC not in
use)

CHAPTER RPT:
Repeat current chapter
TITLE RPT:
Repeat current title

CHAPTER RPT:
Repeat current chapter
PROGRAM RPT:
Repeat current program (not

available for Playlist Playback)

TRACK RPT:
Repeat current track
FOLDER RPT:
Repeat current folder

TRACK RPT:
Repeat current track (PBC not in

use)

—

—

FOLDER RND:
Randomly play all tracks of

current folder, then tracks of

next folders
ALL RND:
Randomly play all tracks

ALL RND:
Randomly play all tracks (PBC

not in use)

Skip 10 tracks (within the
same folder)

TRACK RPT:
Repeat current track
FOLDER RPT:
Repeat current folder

FOLDER RND:
Randomly play all tracks of

current folder, then tracks of

next folders
ALL RND:
Randomly play all tracks

Skip 10 tracks TRACK RPT:

Repeat current track

ALL RND:
Randomly play all tracks

• To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”

1

If the file does not have Tag information or “TAG DISPLAY” is set to “TAG OFF” (see page 25), folder name and file

*

name appear. TAG indicator will not light up.

*2 “NO NAME” appears for an audio CD.
*3 Search speed:
*4 Search speed:
*5 Press to select number 1 to 6; hold to select number 7 to 12.

13OPERATIONS

Operations using the remote controller (RM-RK252)

Disc

Button

/

Stop play Stop play

Start play/Pause (if pressed during play) Start play/Pause (if pressed during play)

• Reverse/forward chapter search *1 (No
sound can be heard.)

Reverse/forward track search *4 (No sound can
be heard.)

• Slow motion *2 during pause (No sound can
be heard.)

* DVD-VR: Reverse slow motion does not work.

[Press] Select chapter (during play or pause)
[Hold] Reverse/fast-forward chapter search *

[Press] Select track

3

[Hold] Reverse/fast-forward track search *

(No sound can be heard.)

• DVD-Video: Select title (during play or

Select folder

pause)

• DVD-VR: Select program

Select playlist (during play or

pause)

5

• Skip back or forward the scenes by about

—

five minutes

• Select chapter

To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/MP3/
WMA/WAV/CD)

1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode.

DVD-Video :

DVD-VR :

DivX/MPEG Video :

MP3/WMA/WAV :

2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
3 Press ENT (enter) to confirm.

14