JVC KD-AHD79, GET0721-001A, KD-HDR70 User Manual

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Still having trouble??

USA ONLY

Call 1-800-252-5722

http://www.jvc.com

We can help you!

• HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp.

• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.

KD-AHD79/KD-HDR70

CD RECEIVER / RECEPTOR CON CD / RÉCEPTEUR CD

For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla, consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.

For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For customer Use:

Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No.

ENGLISH

ESPAÑOL

FRANÇAIS

EN, SP, FR

GET0721-001A

[J]

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare

into beam.

(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view

directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Caution:

Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident.

2 ENGLISH

WARNING:

Stop the car before operating the unit.

Caution on volume setting:

Digital devices (CD/USB) produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by the sudden increase of the output level.

How to attach/detach the control panel

How to reset your unit

Your preset adjustments will also be erased.

How to forcibly eject a disc

[Hold]

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

Maintenance

Cleaning the unit

Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the unit.

Cleaning the connector

Wipe off dirt on the connector of the unit and panel. Use a cotton swab or cloth.

CONTENTS

3 How to attach/detach the control

panel

3 How to reset your unit 3 How to forcibly eject a disc 3 Maintenance

4 Canceling the display

demonstration

4 Setting the clock

5 Preparing the remote controller

5 About discs

6 Basic operations

7 Listening to the radio

11 Listening to a disc

12 Connecting the other external

components

12 Listening to the other external

components

13 Listening to a USB device

14 Listening to an iPod/iPhone

16 Selecting a preset sound mode

16 Menu operations

19 Troubleshooting

22 Using Bluetooth ® devices

23 Specifications

Caution for DualDisc playback:

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

JVC bears no responsibility for any loss of data in an iPod/iPhone and/or USB mass storage class device while using this System.

Condensation : When the car is airconditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. Temperature inside the car : If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

3ENGLISH

Canceling the display demonstration

1 Turn on the power.

[Hold]

(Initial setting)

Setting the clock

1 Turn on the power.

[Hold]

3 Select <CLOCK>.

4 Select <CLOCK SET>.

[Hold]

(Initial setting)

4 Select <DEMO OFF>.

6 Finish the procedure.

5 Adjust the hour.

6 Adjust the minute.

7 Finish the procedure.

4 ENGLISH

(Initial setting)

Preparing the remote controller

When you use the remote controller for the first time, pull out the insulation sheet.

Insulation sheet

For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material— special handling may apply. See www.dtsc. ca.gov/hazardouswaste/perchlorate

If the effectiveness of the remote controller decreases, replace the battery.

Replacing the lithium coin battery

CR2025

This unit is equipped with the steering wheel remote control function.

• For details, refer also to the instructions supplied with the remote adapter.

About discs

Caution:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

Warning (to prevent accidents and damage):

• Do not install any battery other than CR2025 or its equivalent.

• Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.

• Store the battery in a place where children cannot reach.

• Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

• Do not leave the battery with other metallic materials.

• Do not poke the battery with tweezers or similar tools.

• Wrap the battery with tape and insulate when throwing away or saving it.

This unit can only play the CDs with:

Discs that cannot be used:

• Discs that are not round.

• Discs with coloring on the recording surface or discs that are dirty.

• You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.)

• 3-inch CD cannot be used. Attempt to insert using an adapter can cause malfunction.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove the rims from the center hole and disc edge before inserting a disc.

5ENGLISH

Basic operations

Loading slot

Remote sensor

• DO NOT expose to bright sunlight.

Detaches the panel

When you press or hold the following button(s)...

Main unit

/ SOURCE

Control dial

(turn)

Control dial

(press)

EQ SOUND

TAG —

BACK —

DISP —

Not applicable under <EXT MODE>.

6 ENGLISH

Remote

controller

— Turns on/off [Hold].

Selects the sources (FM, AM, CD, USB or USB-IPOD, F-AUX, BT AUDIO

SOURCE

VOL – / + Adjusts the volume level.

or R-AUX or BT PHONE).

• “CD” or “USB” is selectable only when a disc is loaded or a USB device is connected.

— Selects items.

Mutes the sound during playback. If the source is “CD” or “USB/ USB-IPOD *” playback pauses.

• Press the button again to cancel muting or resume playback.

— Confirms selection.

Selects the sound mode.

• Hold the EQ button on the main unit to enter tone level adjustment directly. (page 16)

• Tags the PSD (Program Service Data) from HD Radio broadcast.

• Cancels transferring of the tagged PSD to your iPod/iPhone [Hold].

• Selects the controlling terminal of an iPod/iPhone [Hold]. (page 14)

• Returns to the previous menu.

• Exit from the menu [Hold].

• Changes the display information.

• Scrolls the display information [Hold].

Control dial Ejects the disc

Display window

Front auxiliary input jack

USB (Universal Serial Bus) input terminal

General operation

Listening to the radio

You can tune in to both conventional and HD Radio broadcasts.

What is HD Radio™ broadcasting?

HD Radio stations can deliver high-quality digital sound—AM digital will have FM-like sound quality (in stereo) and FM digital will have CD-like sound quality—with static-free and clear reception. Furthermore, stations can offer text and data, such as artist names, song titles, and Program Service Data (PSD).

• HD Radio tuners can also tune in to conventional analog broadcasts.

• Many HD Radio stations offer more than one channel of programming. This service is called multicasting.

• By using PSD, you can easily purchase the songs at iTunes Store.

• To find HD Radio stations in your area, visit <http://www.hdradio.com/>.

]

“FM” or “AM”

Ex.: When receiving a conventional FM station

Lights up when receiving an FM stereo broadcast.

87.50MHz

[Press] Selects your desired channel (HD1 to HD8) when receiving HD Radio multicast channels.

• “LINKING” appears while linking to a multicast channel.

[Hold] Searches for HD Radio stations only.

• “HD” flashes when a station is tuned in, searching stops.

• [Press] Searches for stations/channels automatically.

• [Hold] Searches for stations/channels manually.

“M” flashes, then press the button

repeatedly.

Ex.: When receiving an HD Radio station

Lights up when digital audio is broadcast; flashes when analog audio is broadcast.

WXYZ-FM

Station Call SignSelected frequency

WXYZ-FMHD1

Channel number

Continued...

7ENGLISH

Improving the FM reception

[Hold]

] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same procedure to select <MONO OFF>.

Automatic presetting (FM/AM)

SSM (Strong-station Sequential Memory)

—

You can preset up to 18 stations for FM and 6 stations for AM.

• HD Radio multicast channels can also be preset.

While listening to a station/channel...

[Hold]

Changing the HD Radio reception mode

While receiving an HD Radio broadcast, you can change the reception mode—digital or analog.

• This setting cannot take effect for the conventional FM/AM stations.

While listening to an HD Radio station...

[Hold]

]

<TUNER> ] <BLEND HOLD> ]

< ANALOG / DIGITAL> : Tuning to digital audio or analog audio only.

• HOLD indicator lights up. <AUTO> : Switches between digital and analog audio automatically.

• In the case when the radio station forces the reception mode to analog, the HOLD indicator flashes.

The setting automatically returns to <AUTO> when you tune in to another broadcast.

FM: ] <TUNER> ] <SSM> ] <SSM 01 – 06 / 07 – 12 / 13 – 18> AM: ] <TUNER> ] <SSM> ] <SSM 01 – 06> “SSM” flashes and local stations/channels with the strongest signal are searched and stored automatically.

To preset another 6 stations/channels, repeat the above procedure by selecting one of the other SSM setting ranges.

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6 stations for AM.

]

Tune in to a station/channel you want

to preset.

“PRESET MODE” flashes.

[Hold]

]

Selects a preset number. Preset number flashes and “MEMORY” appears.

8 ENGLISH

Selecting a preset station/ channel

Using the remote controller

/ ∞ : [Press] Changes the preset stations/

channels.

[Hold] Searches for HD Radio stations

only.

/ 3 : [Press] Searches for stations

automatically.

[Hold] Searches for stations manually.

Changing the display information

Call Sign *1 = Frequency = PTY (Program Type) *2 = Text *3 = Clock = (back to the beginning)

Displayed only when a Call Sign is received.

When no program type (PTY) is received, “HD RADIO” appears for HD Radio broadcasting, and “ANALOG” appears for conventional FM/AM broadcasting.

“NO TEXT” appears when no text is received.

Tagging/purchasing your favorite songs from iTunes Store

Some HD Radio broadcasts provide PSD (Program Service Data) for a song. You can tag the song and store its PSD (maximum 60 songs) while listening to the song. By using the tagging function, you can easily purchase the songs from iTunes Store.

Notes on storing tagged PSDs

• When pressing TAG within 10 seconds before

or after the PSD changes (while the TAG indicator flashes), the tags for two songs are stored.

• You cannot tag a song in the following cases: – When the broadcast currently received does

not support the iTunes Tagging or does not

support PSD. – When you try to store the 61st PSD. – When the song is already tagged. – While transferring the tagged PSDs to your

iPod/iPhone is in progress.

You can enjoy iTunes Tagging with the following types of iPod/iPhone:

• iPod classic, software version 1.0 or later

• iPod nano (3rd Generation), software version

1.0 or later

• iPod nano (4th Generation), software version

1.0 or later

• iPod nano (5th Generation), software version

1.0 or later

• iPod nano (6th Generation), software version

1.1 or later

• iPod touch (1st Generation), software version

2.1 or later

• iPod touch (2nd Generation), software version

2.1 or later

• iPod touch (3rd Generation), software version

3.1 or later

• iPod touch (4th Generation), software version

4.1 or later

• iPhone/iPhone 3G, software version 2.1 or

later

• iPhone 3GS, software version 3.0 or later

• iPhone 4, software version 1.0 or later

Continued...

9ENGLISH

STEP 1: Tagging the song

While receiving a song with PSD...

Lights up while receiving a song with PSD.

TAG SAVED

The tagged PSD is stored on the unit.

When an Apple iPod/iPhone is connected (page 14), the tagged PSDs are automatically transferred to the iPod/iPhone. Go to STEP 3 to purchase the song.

To check the number of tagged songs stored on the unit, press and hold TAG.

To delete the tagged songs from the unit

Press and hold MENU.

Turn the control dial to select “TAG ALL

CLR,” then press and hold to confirm.

STEP 2: Transferring the tagged PSD to

your iPod/iPhone

Connect the iPod/iPhone to the unit. (page 14) The source changes to “USB-IPOD,” the tagged PSDs are automatically transferred to the iPod/ iPhone.

• Your iPod/iPhone must have 50 MB free space, which is required for transferring a tagged PSD.

• You cannot change the source during the transferring process.

While transferring the tagged PSDs, the “TAG” indicator flashes.

TRANS 02/15

Number of PSDs transferred to the iPod/ iPhone / Number of PSDs stored on the unit

“COMPLETED” appears when all tagged PSDs are transferred to the iPod/iPhone.

You cannot transfer the tagged PSDs to the iPod/iPhone in the following cases:

• When the connected iPod/iPhone is not compatible with iTunes Tagging.

• When the memory of the iPod/iPhone is full.

• When disconnecting the iPod/iPhone during data transfer.

STEP 3: Purchasing songs from iTunes

Store

• iTunes 7.4 or later version is required to purchase the tagged songs. For details about iPod/iPhone and iTunes, refer

• also to the instructions supplied with the iPod/ iPhone or visit <http://www.apple.com>.

Connect the iPod/iPhone to the PC.

Synchronize the iPod/iPhone to the

iTunes.

The tagged PSDs are transferred to PC, and

iTunes displays the list of the tagged songs.

After the data transfer is completed, the

stored PSDs are automatically deleted from the iPod/iPhone.

Warning messages for iTunes Tagging

• MEMORY FULL : You are trying to store the 61st PSD. Transfer the tagged PSDs to the iPod/iPhone, or clear all tagged PSDs.

• TAG ALREADY SAVED : You are trying to tag the song for the 2nd time while receiving one song.

• NO TAG DATA : The broadcast currently received does not support the iTunes Tagging or the broadcast does not provide PSD.

• CAN’T TRANS IPOD FULL : The memory of the iPod/iPhone is full.

• UNSUPPORTED DEVICE FOR TAGGING : The connected iPod/iPhone is not compatible with iTunes Tagging.

• TRANS ERROR : The iPod/iPhone is disconnected during data transfer.

• TRANS OFF : Data transfer is canceled.

10 ENGLISH

Listening to a disc

Playback starts automatically. All tracks will be played repeatedly until you change the source or eject the disc.

Stopping playback and ejecting the disc

If the ejected disc is not removed within 15 seconds, it will automatically reload into the loading slot.

Basic operations

Selects folder of the MP3/WMA.

[Press] Selects track. [Hold] Fast-forwards or reverses the track.

Using the remote controller

/ ∞ : Selects folder of the MP3/WMA.

/ 3 : [Press] Selects track.

[Hold] Fast-forwards or reverses the

track.

Changing the display information

Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning) *

“NO NAME” appears for conventional CDs or if not

recorded.

Selecting a track/folder from the list

• If the MP3/WMA disc contains many tracks, you can fast search (±10, ±100) through the disc by turning the control dial quickly.

• To return to the previous menu, press BACK.

Selecting the playback modes

You can use only one of the following playback modes at a time.

[Hold]

]

“REPEAT” j “RANDOM”

REPEAT TRACK RPT : Repeats current track FOLDER RPT : Repeats current folder

RANDOM FOLDER RND : Randomly plays all tracks of

current folder, then tracks of next folders

ALL RND : Randomly plays all tracks

To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”

11ENGLISH

Connecting the other external components

You can connect an external component to the auxiliary input jack on the control panel (F-AUX) and/or on the rear side of the unit (R-AUX).

Summary of using the external components through the auxiliary input jacks:

item

Preparation

Sub-item Setting

Source name

BT PHONE *

External component

Portable audio player

Bluetooth device Rear SRC SELECT R-AUX BT ADAPTER BT AUDIO/

“BT PHONE” appears when a Bluetooth phone is in use.

Auxiliary

input jack

Front SRC SELECT F-AUX ON F-AUX Rear SRC SELECT R-AUX ON R-AUX

Menu setting

On the control panel (F-AUX): On the rear panel (R-AUX):

3.5 mm (3/16”) stereo mini plug (with “L” shaped connector) (not supplied)

3.5 mm (3/16”) stereo mini plug (not supplied)

Connecting cable/

device

(not supplied)

See below.

KS-BTA100 (page 22)

Portable audio player,

etc.

Recommended to use a 3-terminal plug head stereo mini plug for optimum audio output.

Portable audio player,

etc.

Listening to the other external components

For details, refer also to the instructions supplied with the external components.

]

“F-AUX” or “R-AUX”

12 ENGLISH

Turn on the connected component and

start playing the source.

Listening to a USB device

You can operate the USB device in the same way you operate the files on a disc. (page 11)

• This unit can play MP3/WMA files stored in a USB mass storage class device (such as a USB memory, Digital Audio Player, etc.).

]

Turn on the power.

All tracks will be played repeatedly until you change the source or disconnect the USB device.

Cautions:

• Make sure all important data has been backed up.

• You cannot connect a computer or portable HDD to the USB input terminal of the unit.

• Avoid using the USB device if it might hinder your safety driving.

• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.

• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

• This unit may not play back files in a USB device properly when using a USB extension cord.

• USB devices equipped with special functions such as data security functions cannot be used with the unit.

• When connecting a USB cable, use the USB

2.0 cable.

• Do not use a USB device with 2 or more partitions.

[Hold]

USB input terminal

USB cable (not supplied)

• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.

• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.

• Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.

• This unit may not recognize a memory card inserted into the USB card reader.

• Connect only one USB device to the unit at a time. Do not use a USB hub.

• Operation and power supply may not work as intended for some USB devices.

• The maximum number of characters for:

– Folder names : 63 characters – File names : 63 characters – MP3 Tag : 60 characters – WMA Tag : 60 characters

• This unit can recognize a total of 65 025 files, 255 folders (255 files per folder including folder without unsupported files), and of 8 hierarchies.

13ENGLISH

Listening to an iPod/iPhone

]

Turn on the power.

All tracks will be played repeatedly until you change the source or disconnect the iPod/iPhone.

[Hold]

USB 2.0 cable (accessory of the iPod/iPhone)

USB input terminal

Apple iPod/iPhone

Cautions:

• Avoid using the iPod/iPhone if it might hinder your safety driving.

• Make sure all important data has been backed up to avoid losing the data.

Selecting the control terminal

[Hold]

]

• For details, see <IPOD SWITCH> setting on page 19.

Selecting a track from the menu

Not applicable under <IPOD MODE / EXT MODE>.

Basic operations

]

Not applicable under <EXT MODE>.

[Press] Selects track/ chapter. [Hold] Fast-forwards or reverses the track.

Select the desired menu. PLAYLISTS j ARTISTS j ALBUMS j SONGS j PODCASTS j GENRES j COMPOSERS j (back to the beginning)

Using the remote controller

/ 3 : [Press] Selects track/chapter.

[Hold] Fast-forwards or reverses the

track.

Changing the display information

Album name/performer = Track title = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning)

14 ENGLISH

]

Select the desired track. Repeat this step until the desired track is selected.

• If the selected menu contains many tracks, you can fast search (±10, ±100, ±1 000, ±10 000) through the menu by turning the control dial quickly.

• To return to the previous menu, press BACK.

Selecting the playback modes

• You can use only one of the following playback modes at a time.

• Not applicable under <IPOD MODE / EXT MODE>.

[Hold]

]

“REPEAT” j “RANDOM”

REPEAT ONE RPT : Functions the same as

“Repeat One” of the iPod

ALL RPT : Functions the same as

“Repeat All” of the iPod

RANDOM ALBUM RND : Functions the same as

“Shuffle Albums” of the iPod

SONG RND : Functions the same as

“Shuffle Songs” of the iPod

• To cancel random play, select “RND OFF.”

• “ALBUM RND” is not available for some iPod/ iPhone.

• To return to the previous menu, press BACK.

Additional information

• Made for iPod touch (1st, 2nd, 3rd, and 4th generation) iPod classic iPod with video * iPod nano (1st *, 2nd, 3rd, 4th, 5th, and

6th generation) iPhone 4 iPhone 3GS iPhone 3G iPhone * <IPOD MODE / EXT MODE> are not available.

• It is not possible to browse video files on the “Videos”

menu in <HEAD MODE>.

• The song order displayed on the selection menu of

this unit may differ from that of the iPod.

• When operating an iPod/iPhone, some operations

may not be performed correctly or as intended. In this

case, visit the following JVC web site: <http://www.

jvc.co.jp/english/car/> (English website only).

15ENGLISH

Selecting a preset sound mode

You can select a preset sound mode suitable for the music genre.

FLAT = NATURAL = DYNAMIC = VOCAL BOOST

BASS BOOST = USER =

(back to the beginning)

While listening, you can adjust the subwoofer level and tone level of the selected sound mode.

[Hold]

Adjust the level: SUB.W : 00 to 08 BASS / MID / TRE : –06 to +06 The sound mode is automatically stored and changed to “USER.”

Storing your own sound mode

You can store your own adjustments in memory.

[Hold]

] <PRO EQ> ] <BASS / MIDDLE / TREBLE>

Adjust the sound elements (see table below) of the selected tone.

Repeat steps 2 and 3 to adjust other

tones. The adjustments made is automatically stored and changed to “USER.”

[Initial: Underlined ]

BASS Frequency: 60 / 80 / 100 / 200 Hz

Level: –06 to +06 [ 00 ] Q: Q1.0 / 1.25 / 1.5 / 2.0

MIDDLE

TREBLE

Frequency: 0.5 / 1.0 / 1.5 / 2.5 kHz Level: –06 to +06 [ 00 ] Q: Q0.75 / 1.0 / 1.25

Frequency: 10.0 / 12.5 / 15.0 /

17.5 kHz Level: –06 to +06 [ 00 ] Q: Q FIX

Menu operations

If no operation is done for about 60 seconds, the operation will be canceled.

Menu item

DEMO

CLOCK

16 ENGLISH

[Hold]

ON :

about 20 seconds. /

For settings, see page 4.

2 3

Selectable setting, [Initial: Underlined]

Display demonstration will be activated automatically if no operation is done for

OFF :

Cancels. (page 4)

Repeat step 2 if necessary.

• To return to the previous

menu, press BACK.

• To exit from the menu, press

MENU.

Menu item

BUTTON ZONE

29 preset colors / buttons illumination (except for

Selectable setting, [Initial: Underlined]

USER

COLORFLOW 01/02/03

DISP

/ EQ / 0) and display color separately.

: Selects your preferred color for

• If <ALL ZONE> is selected, the button and display illumination will change to the current/selected <BUTTON ZONE> color.

DISP ZONE

• Initial color :

BUTTON ZONE

[ 06 ],

DISP ZONE

[ 01 ],

ALL ZONE

[ 06 ]

Display zone

COLOR

ALL ZONE

Button zone

All zone

DAY COLOR BUTTON ZONE

DISP ZONE

NIGHT COLOR BUTTON ZONE

DISP ZONE

COLOR SETUP

ON :

MENU COLOR

Changes the display and buttons (except for

menu, list search and playback mode operations. /

DIMMER SET AUTO :

You can create your own day and night colors for <BUTTON ZONE> and <DISP ZONE> separately. Perform step 2 (page 16) to select a primary color (

GREEN

BLUE

), then adjust the level [

00 — 31

procedure until you have adjusted all the three primary colors.

• If “00” is selected for all the primary colors for <DISP ZONE>, nothing appear on the display.

DISP

/ EQ / 0) illumination during

OFF :

Cancels.

Changes the display and button illumination between the Day/Night

RED

]. Repeat this

adjustments in <BRIGHTNESS>/<COLOR SETUP> setting when you turn off/on the car headlights. *1 / <COLOR SETUP> setting for the display and button illumination. /

DIMMER

adjustments in <BRIGHTNESS>/ <COLOR SETUP> setting for the display and button illumination.

BRIGHTNESS DAY [ 31

level [

00 — 31

SCROLL *

ONCE :

Scrolls the displayed information once. / 5-second intervals). / (Pressing

DISP

DISPLAY

TAG DISPLAY ON :

PRO EQ

The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to any other than <DIMMER AUTO>.

Some characters or symbols will not be shown correctly (or will be blanked) on the display. When receiving an HD Radio station, the information always scroll automatically on the display regardless of the setting.

setting.)

Shows the Tag information while playing MP3/WMA tracks. /

For settings, see page 16.

ON :

Selects the Night adjustments in <BRIGHTNESS>/

] /

NIGHT [ 15 ] :

Selects the display and button illumination brightness

] for day and night.

AUTO :

Repeats scrolling (at

OFF

: Cancels.

for more than one second can scroll the display regardless of the

OFF :

Selects the Day

Cancels.

Continued...

17ENGLISH

Menu item

FADER *3, *

R06 — F06 [ 00 ] :

BALANCE *4L06 — R06 [ 00 ] :

LOUD ON :

Boost low and high frequencies to produce a well-balanced sound at a low volume

level. /

OFF :

VOL ADJUST –05 — +05

Selectable setting, [Initial: Underlined]

Adjusts the front and rear speaker output balance.

Adjusts the left and right speaker output balance.

Cancels.

[ 00 ] : Presets the volume adjustment level of each source (except “FM”), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. Before adjustment, select the source you want to adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)

SUB.W ON :

SUB.W LPF LOW 55Hz / LOW 85Hz / LOW 120Hz :

AUDIO

SUB.W LEVEL 00 — 08

HPF ON :

BEEP ON / OFF : TEL MUTING *5ON :

AMP GAIN *6LOW POWER :

Turns on the subwoofer output. /

OFF :

Cancels.

Frequencies lower than

55 Hz/85 Hz/120 Hz are sent to the subwoofer.

[ 04 ] : Adjusts the subwoofer output level.

Activates the High Pass Filter. Low frequency signals are cut off from the front/rear

speakers. /

OFF :

Deactivates (all signals are sent to the front/rear speakers).

Activates or deactivates the keypress tone.

Mutes the sounds while using the cellular phone (not connected through

KS-BTA100). /

OFF :

Cancels.

VOLUME 00 – VOLUME 30 (Selects if the maximum power

of each speaker is less than 50 W to prevent damaging the speakers.) /

HIGH POWER

SSM *

For settings, see page 8.

AREA US :

10 kHz/200 kHz. / 9 kHz/50 kHz. /

: VOLUME 00 – VOLUME 50

When using in North/Central/South America. AM/FM intervals are set to

EU :

When using in any other areas. AM/FM intervals are set to

SA :

When using in South American countries where FM interval is

50 kHz. AM interval is set to 10 kHz.

MONO *

TUNER

BLEND HOLD *7For settings, see page 8.

IF BAND AUTO :

For settings, see page 8.

Increases the tuner selectivity to reduce interference noises between adjacent

stations. (Stereo effect may be lost.) /

WIDE :

Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain.

TAG ALL CLEAR

If you are using a two-speaker system, set the fader level to “00.”

This adjustment will not affect the subwoofer output.

This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.

The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level set higher than “VOLUME 30.”

Displayed only when the source is “FM” or “AM.”

For settings, see page 10.

18 ENGLISH

Menu item

IPOD SWITCH *

HEAD MODE :

iPod playback through the iPod/iPhone. /

Selectable setting, [Initial: Underlined]

Controls iPod playback through the unit. /

EXT MODE :

IPOD MODE :

The sound of any functions

Controls

(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted through the speakers connected to this unit. The display always show “EXT MODE.”

AM * F-AUX * R-AUX *

SRC SELECT

Displayed only when “USB-IPOD” is selected as the source.

Displayed only when any source other than “AM/F-AUX/R-AUX/BT AUDIO” is selected separately.

ON / OFF :

Enable or disable “AM” in source selection.

Enable or disable “F-AUX” in source selection.

Enable or disable “R-AUX” in source selection. / the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 12) The source name changed to “BT AUDIO.”

BT ADAPTER :

Selects if

Troubleshooting

Symptom Remedy/Cause

Sound cannot be heard from the speakers.

“MISWIRING CHK WIRING THEN RESET UNIT” / “WARNING CHK WIRING THEN RESET UNIT” appears on the display and no operations can be done.

The unit does not work at all. Reset the unit. (page 3)

“F-AUX” or “R-AUX” cannot be selected. Check the <SRC SELECT>

General

Sound is sometimes interrupted while listening to an external component connected to the auxiliary input jack.

The correct characters are not displayed (e.g. album name).

SSM automatic presetting does not work. Store stations manually.

Static noise while listening to the radio. Connect the antenna firmly.

“AM” cannot be selected. Check the <SRC SELECT>

FM/AM

Sound quality changes when receiving HD Radio stations.

Adjust the volume to the optimum level. / Make sure the unit is not muted/paused. (page 6) / Check the cords and connections.

Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. (page 3) If the message does not disappear, consult your JVC car audio dealer or a company supplying kits.

<F-AUX / R-AUX> setting. (See

above.)

Check to be sure the recommended stereo mini plug is used for connection. (page 12)

This unit can only display letters (upper case), numbers, and a limited number of symbols.

<AM> setting. (See above.)

Fix the reception mode either to < ANALOG / DIGITAL>. (page 8)

Continued...

19ENGLISH

Symptom Remedy/Cause

No sound can be heard. <ANALOG> is selected when receiving all digital broadcast of

HD Radio station. Select <DIGITAL / AUTO>. (page 8) / <DIGITAL> is selected when receiving weak digital signals or receiving

FM/AM

The song cannot be tagged. The HD Radio broadcast does not support iTunes Tagging function or

Disc cannot be played back. Insert the disc correctly.

CD-R/CD-RW cannot be played back and track cannot be skipped.

Disc sound is sometimes interrupted. Stop playback while driving on rough roads. / Change the disc. /

“NO DISC” appears on the display. Insert a playable disc into the loading slot.

“PLEASE” and “EJECT“ appear

Disc playback

alternately on the display.

“IN DISC” appears on the display. The disc cannot be ejected properly. Make sure nothing is blocking

Disc cannot be played back. Use a disc with MP3/WMA tracks recorded in a format compliant

Noise is generated. Skip to another track or change the disc.

“READING” keeps flashing on the display.

Tracks do not play back in the order you have intended them to play.

MP3/WMA playback

The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the

“READING” keeps flashing on the display.

“NO FILE” appears on the display. Check whether the device contains playable files.

Noise is generated. Skip to another file.

“NOT SUPPORT” appears and track

USB playback

skips.

While playing a track, sound is sometimes interrupted.

conventional radio broadcast. Select <ANALOG / AUTO>. (page 8)

the broadcast does not contain PSD. You can tag the PSD only when the TAG indicator lights up on the display.

Insert a finalized CD-R/CD-RW (finalize with the component which you used for recording).

Check the cords and connections.

, then insert a disc correctly.

Press

the loading slot.

with ISO 9660 Level 1, Level 2, Romeo, or Joliet. / Add the extension code <.mp3> or <.wma> to the file names.

A longer readout time is required. Do not use too many hierarchical levels and folders.

The playback order is determined when the files are recorded.

tracks are recorded on the disc.

A longer readout time is required. Do not use too many hierarchical levels and folders. / Turn off the power then on again. / Reattach the USB device again.

Check whether the track is a playable file format.

The tracks have not been properly copied into the USB device. Copy tracks again into the USB device, and try again.

20 ENGLISH

Symptom Remedy/Cause

Tracks/folders are not played back in the order you have intended.

“CANNOT PLAY” flashes on the display. /

USB playback

“NO USB” appears on the display. / The unit cannot detect the USB device.

The iPod does not turn on or does not work.

The sound is distorted. Deactivate the equalizer either on this unit or the iPod/iPhone. Noise is generated. Turn off (uncheck) the “VoiceOver” feature of the iPod. For details,

Playback stops. The headphones are disconnected during playback. Restart the

iPod/iPhone playback

“NO FILE” appears on the display. Check whether the device contains playable files. “CANNOT PLAY” flashes on the display. Check whether the connected iPod/iPhone is compatible with this

Additional information

• This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

• This unit can play back files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower).

• This unit can play back the files meeting the conditions below:

– Bit rate: MP3/ WMA: 8 kbps — 320 kbps – Sampling frequency: MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,

16 kHz, 12 kHz, 11.025 kHz, 8 kHz

WMA: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz

• This unit can show WMA Tag and ID3 Tag Version 1.0/

1.1/ 2.2/ 2.3/ 2.4 (for MP3).

• The search function works but search speed is not constant.

The playback order is determined by the file name. Folders with numbers on the initial of their names are sorted in numerical order. However, folders with no numbers on the initial of their names are sorted according to the file system of the USB device.

Check whether the connected USB device is compatible with this unit. / Reattach the USB device again.

Check the connecting cable and its connection. / Charge the battery of the iPod/iPhone. / Reset the iPod/iPhone. / Check whether <IPOD SWITCH> setting is appropriate. (page 19)

visit <http://www.apple.com>.

playback operation. (page 14)

unit. (page 15)

• This unit can play back files recorded in VBR (variable bit rate). (Files recorded in VBR have a discrepancy in elapsed time indication.)

• The maximum number of characters for file/folder names vary depending on the disc format used (includes 4 extension characters—<.mp3> or <.wma>).

ISO 9660 Level 1 and 2, Romeo: 64 characters, Joliet:

32 characters, Windows long file name: 64 characters

• This unit cannot play back the following files:

– MP3 files: encoded in MP3i and MP3 PRO format; an

inappropriate format; layer 1/2.

– WMA files: encoded in lossless, professional, and

voice format; not based upon Windows Media® Audio; copy-protected with DRM.

– Files which have data such as AIFF, ATRAC3, etc.

Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

21ENGLISH

+ 46 hidden pages