JVC HR-XV45SEK User Manual
DVD PLAYER &
PAL
VIDEO CASSETTE RECORDER
HR-XV45SEK
INSTRUCTIONS
EN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
PERSONNEL.
Notes on copyrights:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on
some discs.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
SERIAL NUMBER: The serial number is found on the back
of this unit. This number is unique to this unit and not
available to others. You should record requested information
here and retain this guide as a permanent record of your
purchase.
Model No. ___________________________________
Serial No. ___________________________________
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference,
should the unit require maintenance, contact an authorized
service location-see service procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to
laser beam, do not try to open the enclosure. Visible laser
radiation when open. DO NOT STARE INTO BEAM.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
This product is manufactured to comply with the
radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
VIDEO Plus+ and PlusCode are registered trademarks of
Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under license
from Gemstar Development Corporation.
Important notes on controlling this
unit
This unit uses one set of controls to operate both
DVD and VCR. The following buttons are helpful in
successfully controlling each part.
1. POWER Button
Press the POWER button on the remote control
or front panel to turn on this unit.
2. DVD Button
Press DVD button on the remote control when
you want to control the DVD.
The DVD indicator will light on the front panel
display to show that the DVD is selected.
3. VCR Button
Press the VCR button on the remote control
when you want to control the VCR.
The VCR indicator will light on the front panel
display to show that the VCR is selected.
4. DVD/VCR Button
Press the DVD/VCR button on the front panel to
toggle control between the DVD and the VCR.
2
Contents
Introduction . . . . . . . . . . . . . . . . . . .4
Symbol Used in this Manual . . . . . . . . . . . . . . .4
About the Symbol Display . . . . . . . . . . . . . .4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4
Handling Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . . .4
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Types of Playable Discs . . . . . . . . . . . . . . . . . . .5
Regional code . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Display Window . . . . . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installation and Setup . . . . . . . . . .10
Connecting to a TV & Decoder (or Satellite) . .10
Connecting to Optional Equipment . . . . . . . . .11
Before Operation-VCR part . . . . . . . . . . . . .12-16
Tuning in a video channel on your TV . . . .12
Using your VCR for the very first time . . .12
Setting the clock Manually . . . . . . . . . . . . .13
To set the colour system . . . . . . . . . . . . . .13
How to using the main menu . . . . . . . . . . .14
Tuning in TV Stations Automatically . . . . .14
Tuning in TV Stations Manually . . . . . . . . .15
Changing the order of TV Stations . . . . . .16
Deleting TV stations . . . . . . . . . . . . . . . . . .16
Before Operation-DVD part . . . . . . . . . . . . .17-21
On-Screen Display . . . . . . . . . . . . . . . . . . . . . .17
Initial Settings . . . . . . . . . . . . . . . . . . . . . . .18-21
General Operation . . . . . . . . . . . . . . . . . . . .18
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .18
Menu Language . . . . . . . . . . . . . . . . . . . .18
Disc Audio / Subtitle / Menu . . . . . . . . . . . .18
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .19
TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . .19
Display Mode . . . . . . . . . . . . . . . . . . . . . .19
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Dolby Digital / DTS / MPEG . . . . . . . . . . . .19
Sample Freq. (Frequency) . . . . . . . . . . . .19
Dynamic Range Control (DRC) . . . . . . . . .19
Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . .20
DivX(R) VOD . . . . . . . . . . . . . . . . . . . . . . .20
LOCK (Parental Control) . . . . . . . . . . . . . . . .21
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Password (Security Code) . . . . . . . . . . . . .21
Area Code . . . . . . . . . . . . . . . . . . . . . . . . .21
Operation . . . . . . . . . . . . . . . . . . . .22
Playing a tape . . . . . . . . . . . . . . . . . . . . . . .22-24
CM (Commercial Message) Skip . . . . . . . .22
OPR (Optimum Picture Response) . . . . . .22
Instant Timer Recording . . . . . . . . . . . . . . . . .23
VIDEO Plus+ Programming . . . . . . . . . . . . . . .24
Timer recording using On Screen Display .25-26
Playing a DVD or Video CD . . . . . . . . . . . . . . .27-29
General Features . . . . . . . . . . . . . . . . . . . . . . .27
Moving to another TITLE . . . . . . . . . . . . . . .27
Moving to another CHAPTER/TRACK . . . . . .27
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Changing the Audio Channel . . . . . . . . . . . .27
Still Picture and Frame-by-Frame Playback . .28
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .28
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .28
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . .28
Time Search . . . . . . . . . . . . . . . . . . . . . . . . .28
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Marker Search . . . . . . . . . . . . . . . . . . . . . . .29
Special DVD Features . . . . . . . . . . . . . . . . . . .29
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . .29
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . .29
Camera Angle . . . . . . . . . . . . . . . . . . . . . . .29
Changing the Audio Language . . . . . . . . . . .29
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Playing an Audio CD or MP3 Disc . . . . . . . . . . . .30
Audio CD and MP3 Disc Features . . . . . . . . . . . .31
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Moving to another Track . . . . . . . . . . . . . . . .31
Repeat Track/All/Off . . . . . . . . . . . . . . . . . . .31
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .31
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . .31
Programmed Playback . . . . . . . . . . . . . . . . . . . . .32
Repeat Programmed Tracks . . . . . . . . . . . . .32
Erasing a Track from Program List . . . . . . . .32
Erasing the Complete Program List . . . . . . . .32
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . . . . .33
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . .33
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .33
Moving to another File . . . . . . . . . . . . . . . . .33
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To rotate picture . . . . . . . . . . . . . . . . . . . . . .33
To listen to MP3 music watching picture
. . . . . . .33
Playing a DVD VR format Disc . . . . . . . . . . . . .34
Maintenance and Service . . . . . . . . . . . . . . . . .34
Playing a DivX Movie Disc . . . . . . . . . . . . . . . .35
Additional Features-VCR part . . . . . . . . . . .36-37
On Screen Display . . . . . . . . . . . . . . . . . . . .36
Tape Counter Memory Stop . . . . . . . . . . . . .36
Video Doctor (Self-Diagnosis) . . . . . . . . . . . .36
Hi-Fi Stereo Sound System . . . . . . . . . . . . .37
Wide Screen Compatibility 16:9 . . . . . . . . . .37
To set the decoder . . . . . . . . . . . . . . . . . . . .37
Additional Features . . . . . . . . . . . . . . . . . . . . .38
Last Scene Memory . . . . . . . . . . . . . . . . . . .38
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . .38
Copying from DVD To VCR . . . . . . . . . . . . . . .38
Recording from another video recorder . . . . .38
Reference . . . . . . . . . . . . . . . . . . . .39
Language Codes . . . . . . . . . . . . . . . . . . . . . . .39
Country Codes . . . . . . . . . . . . . . . . . . . . . . . . .39
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .40
Specification . . . . . . . . . . . . . . . . . . . . . . . . . .41
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .42
3
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Symbol Used in this Manual
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
The exclamation point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Note:
Indicates special notes and operating features.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
JPEG
DivX
JPEG Discs
DivX Discs
About the Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Selecting the Viewing Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
• If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window lights
and output source of DVD deck is viewed on the TV
screen.
• If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window lights
and output source of VCR deck is viewed on the TV
screen.
Notes:
• If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD mode
automatically.
• If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.
4
Types of Playable Discs
2
DVD
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3 or JPEG files.
This indicates a product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may result in
malfunctions.
Regional code
This DVD player is designed and
manufactured for playback of region “2”
encoded DVD software. This unit can play
only DVD discs labeled “2” or “ALL”.
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover.
This number must match your DVD player’s regional
code or the disc cannot play.
• If you try to play a DVD with a different region code
from your player, the message “Check Regional
Code” appears on the TV screen.
Introduction
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available or other functions may be added.
Manufactured under license from Dolby
Laboratories. “Dolby”, and the double-D symbol
are trademarks of Dolby Laboratories.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
5
Disc-related terms
DVD ±R / DVD ±RW
DVD -R and DVD +R are two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc only
once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38 Gigabytes and double-sided discs hold twice as
much. There are no dual layer single sided recordable
discs.
VCD (Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along with quality stereo sound.
MPEG
MPEG is an international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
MP3
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
JPEG
Joint Pictures Expert Group. JPEG is a compressed
file format that allows you to save images with no limit
on the number of colors.
DivX
DivX is the name of a revolutionary new video codec
which is based on the new MPEG-4 compression
standard for video.You will be able to play DivX
movies using this DVD player.
PBC: Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
Title (DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
assigned a reference number enabling you to locate it
easily.
Chapter (DVD video discs only)
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
Scene (VCD)
On a video CD with PBC (playback control) functions,
moving pictures and still pictures are divided into
sections called “scenes”. Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
Track
A distinct element of audiovisual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video (with multiple angles) and several tracks
of audio.
6
Front Panel
mm
Go to beginning of current chapter/track or to PREVIOUS chapter/track.
Press and hold for two seconds for a fast reverse search.
Rewinds the tape.
MM
Go to NEXT chapter/track.
Press and hold for two seconds for a fast forward search.
Winds the tape forwards.
ÁÁ
Stops playback.
X
Pause playback or recording. Press
repeatedly for frame-by-frame playback.
OPEN/CLOSE ( )
Opens or closes the disc tray.
Remote Sensor
Point the remote
control here.
EJECT
Tape Eject
Tape Compartment
zz
To record normally or to activate
One-touch Timer Recording by
repeated presses.
Introduction
DVD/VCR Selector
11//
Switches the
unit to ON or
OFF.
I
Disc Tray
Insert a disc here.
N Starts playback.
Display Window
DVD+VCR is in timer recording or a
Indicates repeat mode.
Adisc is loaded in the DVD deck.
(Lights when a disc is loaded in the
DVD deck and flashes when no disc is
DVD deck is selected.
loaded.)
DVD
Display window
Shows the current
status of the unit.
timer recording is programmed.
[P]
PROG.(-/+)
Channel
Programme
Selectors
A Cassette is in the VCR deck.
VCR deck is selected.
.
VCR recording is engaged.
DVD to VHS copy is in
progress.
Indicates TV mode.
(See Notes on page 23.)
Audio IN
(L/R) Jacks
Video IN Jack
VCR
REC
TV
Indicates total playing time/elapsed time/current time
7
Switches DVD+VCR ON and OFF.
TV/VCR
11//
To view channels selected by the VCR
tuner or by the TV tuner.
DVD
Select the DVD+VCR function mode to
DVD.
VCR
Select the DVD+VCR function mode
Accesses On-Screen Display (DVD).
-
- Shows you the current time or
to VCR.
DISPLAY
:
- -
- -
counter (VCR).
b
- Selects menu options.
- PR/TRK (+/-): Selects VCR
channels. Adjusts manually the tape’s
picture on the screen.
/B/v/V
SETUP/MENU (i)
Accesses or removes DVD Setup
menu and VCR menu.
ENTER/OK
Confirms menu selections. Displays
functions on the TV screen.
X
- Pause playback or recording.
- Press repeatedly for frame-by-frame
playback.
(m)
- Rewinds the tape during the STOP mode.
- For fast reverse picture search.
NN
Starts playback.
(M)
- Advances the tape during the STOP mode.
- For fast forward picture search.
0-9 numerical buttons
Selects numbered options in a menu.
REPEAT
Repeat chapter, track, title or all.
RANDOM ( )
- Plays tracks in random order.
- CM SKIP
REPEAT A-B
Repeats sequence between two
Selects recording speed.
points (A and B)
VIDEO Plus+
To display the programme menu
for VIDEO Plus+ programming.
Remote Control
I
OPEN/CLOSE, EJECT( )
- Ejects the tape in the VCR deck.
- Opens and closes the disc tray.
AUX
Select input source for recording into
.
tape
DISC MENU
Accesses menu on a DVD disc.
SKIP (. / >)
Skip to beginning of current chapter or track,
press twice in quick successions to go to
previous chapter or track.
Skip to next chapter or track.
RETURN
- Removes the setup menu.
- Displays the menu of a video CD with
PBC.
x
Stops playback or recording.
MNL. PROG.
Places a track on the program list.
CLEAR ( )
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
A.MONITOR
Selects an audio language (DVD) or an
audio channel (VCD).
SUBTITLE
Selects a subtitle language.
ANGLE
Selects a DVD camera angle, if available.
ZOOM
Enlarges DVD video image.
MARKER
Marks any point during playback.
SEARCH
Displays Marker Search menu.
TITLE
Displays the disc’s Title menu, if
available.
REC ()
Records normally or activates One
touch Timer Recording with repeated
presses.
Remote Control Operation
Point the remote control at the remote sensor and
press the buttons.
Do not mix old and new batteries and never
mix different types of batteries such as standard, alkaline, etc.
8
Remote control battery installation
Detach the battery cover on the rear
AAA
of the remote control, and insert two
AAA
batteries (size AAA) with and
aligned correctly.
Rear Panel
AERIAL
Connect the aerial using this jack.
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT)
Connect to an amplifier, receiver or stereo system.
EURO AV2 DECODER (VCR IN+OUT/DVD OUT)
Connect to pay-TV decoder, Set Top Box or another
video recorder.
Connect to a power source.
Introduction
AC Power Cord
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to your TV set or another video recorder.
COAXIAL (DVD EXCLUSIVE OUT)
(Digital audio out jack)
Connect to digital (coaxial) audio equipment.
RF.OUT
Connect to your TV using this jack.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
9
Installation and Setup
Tips:
Depending on your TV and other equipment there
are various ways you can connect the player.
Please refer to the manuals of your TV, VCR,
stereo system or other devices as necessary for
additional connection information.
Notes:
The picture and sound of a nearby TV, VCR, or radio may
be distorted during playback. Position the units away from
each other or turn off the unit after removing the disc.
Make sure the DVD+VCR is connected directly to the TV
and tune the TV to the correct video input channel.
Do not connect the DVD+VCR’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system. Do not
connect the DVD+VCR via another VCR. The DVD image
could be distorted by the copy protection system.
Connecting to a TV & Decoder (or Satellite)
Make one of the following connections, depending on
the capabilities of your existing equipment.
Basic connection (AV)
1. Connect the EURO AV1 AUDIO/VIDEO on the
rear panel of this unit to the SCART input socket
on the TV using a SCART lead (not supplied).
For TV without SCART, connect the yellow VIDEO
OUT jack and DVD/VCR AUDIO OUT jacks of this
unit to the TV.
2. Some TV broadcasters transmit encoded television
signals which you can only see with a purchased
or rented decoder. You can connect such a
decoder (descrambler) to this unit.
Basic connection (RF)
1. Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
2. Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television’s Antenna Input.
AUDIO INPUT
VIDEO INAERIAL
L
Rear of this unit (Basic connection)
SCART INPUT
R
Decoder (or Satellite)
Rear of TV
10
Connecting to Optional Equipment
2 channel analog stereo or Dolby Surround connection.
Rear of this unit
Amplifier (Receiver)
DVD exclusive out
Digital multi-channel
connection
L
R
AUDIO INPUT
DIGITAL INPUT
COAXIAL
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic
II /Pro Logic
Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
1. Connect this unit’s DIGITAL AUDIO OUT jack
(COAXIAL) to the corresponding in jack on your
amplifier. Use an optional digital (coaxial) audio
cable.
2. You will need to activate this unit’s digital output.
(See “AUDIO” on page 19).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Notes:
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
To see the audio format of the current DVD in the
On-Screen Display, press A.MONITOR.
Installation and Setup
Warning:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
11
Before Operation-VCR part
Tuning in a video channel on your TV
Notes:
The output frequency of this DVD+VCR is set at
UHF channel 36. If channel 36 is already used by
another TV station, or if the picture is distorted, you
can change the transmitter channel of your
DVD+VCR. Stages 5 ~ 8 will show you how to
change the output frequency of your DVD+VCR.
Your TV receives signals from the DVD+VCR like
another TV station. You have to select a channel
number on your TV and tune it in so that you may
watch video tapes. If you have used a SCART then
your TV should already have a dedicated video
channel built into it, usually called AV.
1. Make sure that you have correctly installed your
DVD+VCR as described earlier in this book.
11//++
Press
to turn on your DVD+VCR.
Turn on your TV.
2. Insert a pre-recorded video tape into your
DVD+VCR and press NNon the remote control.
Select a TV channel which you wish to watch
video.
Don’t worry if you don’t have a video-tape to play
at this stage! If you switch your DVD+VCR on and
continue stages 3 ~ 4, instead of seeing video
playback tune your TV until you see a bright blue
screen.
3. Tune this channel until the video picture is sharp
and the sound is clear.
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
pre-tuned for optimum video playback on your TV.
4. Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5. Only carry out stages 5 ~ 8 if you cannot
obtain clear video playback as described in
stages 1 ~ 4.
Select a TV channel which you wish to watch
video.
Make sure that your DVD+VCR is in standby
pressing
11//
+ on the remote control (only the clock
will be displayed).
6. Press PROG. (-/+) on the front of your DVD+VCR
for more than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
7. Use PROG. (-/+) to select another video channel.
You may select any channel number between 22
and 68.
8. Select a TV channel which you wish to watch
video.
11//
Press
+ on the front of your DVD+VCR when
you have finished.
Tune this channel so that a bright blue screen
appears.
Store this channel on your TV.
Notes:
Make sure that you have correctly installed your DVD+VCR
and successfully tuned in a dedicated video channel on your
TV. If you do not tune in a dedicated video channel on your
TV you will be unable to view and record video tapes!
Using your VCR for the very first time
Following picture will display on the TV screen
when you have just connected your video
recorder for the very first time.
To make tuning TV stations, please follow stages
3 to 4 as shown "ACMS" (see p.14).
ACMS
Pr-12
RF CHANNEL 36
ACMS
OK
i
12
Setting the clock Manually
To set the colour system
The clock in your VCR controls time and date
settings for your VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a
Teletext signal. If the broadcast signal is weak
the clock will not be set and will require setting
manually.
1. Press i.
Press 1 or 2 to select SET.
Press OK.
The ACSS mode can be set to “OFF” by pressing
OK if you want to set the time manually.
HH MM DD MM YY
:..- -
- -
12
SET
2. Use the vvorVVon the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically
when you enter the year.
3. If you make a mistake press 1 or 2 and enter the
correct details.
- - - -
ACSS : ON
- - - - -
i
OK
1. Press i.
2. The main menu will appear on the TV screen.
3. Press 1 or 2 to select the SYS and press OK.
4. Press 3 or 4 to select according to the COLOUR
system used.
AUTO
12
PAL
SET
SYS
f
ON
OFF
OSD
OSD
MESECAM
SYS
i
5. Press 1 or 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
RF-I/I
12
RF-B/G
SET
SYS
RF-D/K
f
OSD
OSD
ON
OFF
SYS
i
6. Press i to remove the menus from the TV screen.
Installation and Setup
HH MM DD MM YY
:..00 1 01 05 SAB 8
12
SET
ACSS : SPE.
4. Press i to return to a TV picture.
i
OK
13
Loading...