JVC HR-VP676U User Manual

4
4
* You can use the available buttons on the remote control or on the VCR.
WATCH A RECORDED PROGRAM
1 Load a cassette with the label facing out and the window facing up. 2 Press REW or FF (remote) to find program start point. 3 Press PLAY to start playback. 4 Press STOP (remote) or STOP/EJECT (VCR), then press STOP/EJECT to remove the
cassette.
POWER
POWER
VIDEO (MONO)L—AUDIO—R
Dear Customer,
Thank you for purchasing this JVC Video Cassette Recorder.
PLAY
FFREW
PLAY
JOG
MENU
OK
SP EP
VCR
CH
REC STOP/EJECT PAUSE
QUICK START*
* Please refer to the HR-VP676U’s instruction manual for more
detailed information.
MONO/Hi-Fi/SUPER VHS VIDEO CASSETTE RECORDERS
5
5
RECORD A PROGRAM
a–BASIC RECORDING
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette as above. 2 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote),
to select the recording channel.
3 Press SP/EP (remote) to set the recording speed. 4 Press REC and PLAY together (remote) or REC (VCR) to start recording. 5 Press PAUSE to stop recording temporarily, and press PLAY to resume. 6 Press STOP or STOP/EJECT, then press STOP/EJECT to remove the cassette.
b–INSTANT TIMER RECORDING
* You cannot perform ITR using the remote control.
1 Press REC to start recording. 2 Press REC to engage ITR. “0:30” appears in the VCR display. 3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
ENTER
TV/VCR
PLAY
REW (Rewind)
REC
STOP
CH
MBRSET
CABLE/
DBS
TV
123 456
DBS
7
C. RESET
CANCEL
START STOP DATE
EXPRESS PROGRAMMING
PROG
1
REW
REC
MENU
T
V
V
O
L
A/B
TV/VCR
ENTER/OSD
DAILY(M-F)
89
AUX
0
PROG
SP/EP SKIP SEARCH
CHECK
PLAY
STOP
3
OK
H
C
V
+
T
SHUTTLE
PLUS
T
V
H
C
POWER
DISPLAY
WEEKLY
TIMER
CH
FF
PAUSE
V
T
V
Ä
REC
PAUSE
A GUIDE TO EASY SET UP AND USE
The Path To Enjoyment Starts Here . . .
1
1
CHECK
PACKAGE
CONTENTS
STOP/EJECT
SITUATE AND
CONNECT
POWER
2
NUMBER
2
2
VCR
PLAY BACK
3
3
A
4
4
+/–
CH
SP/EP FF (Fast-Forward)
4
MAKE SURE THAT YOUR PACKAGE
1
1
CONTAINS:
VIDEO CASSETTE RECORDER
TAPE
RF CABLE (F-TYPE)
PAUSE
+
L
O
“AA” BATTERY x 2
5
5
CONTROLLER
SET CLOCK
AND
TUNER
RECORD
A
PROGRAM
INFRARED REMOTE CONTROL UNIT
123 456
89
7
0
1
2
4
3
MULTI BRAND
REMOTE CONTROL UNIT
U
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
Printed in Malaysia 1198 IYV
*MW*
PJ
LPT0166-002A
2
VIDEO OUT
AUDIO OUT
R
L
2
SITUATE AND CONNECT YOUR NEW VCR
b–CATV CONVERTER CONNECTION
3
3
SET YOUR VCR'S CLOCK AND TUNER
a–BASIC ANTENN A/CABLE CONNECTION
1 Place the VCR on a stable, horizontal
surface.
2 Disconnect your antenna or cable line
from your TV.
3 Connect your antenna to your VCR. 4 Connect your VCR to your TV.
RF CONNECTION
COMBINED VHF/UHF
SEPARATE VHF/UHF
Back of VCR (example only) Back of TV (example only)
5 After completing the basic connections:
If you’re using a Cable Box, . . . . . . go to 2b (CATV CONVERTER
CONNECTION) .
If you’re using an AV connection, . . . . . . go to 2c (AUDIO/VIDEO
CONNECTIONS).
If you’re using an RF connection, . . . . . . go directly to 3 (PLUG & PLAY).
ANT. IN
RF OUT
VHF/UHF
CATV Input
Cable Box
From Cable Box
With this connection you can view/record any cable channel including scrambled channels to which you have subscribed.
To watch TV with this type of connection
1
Press TV/VCR on remote to engage VIDEO mode.
2 Tune TV to VCR output channel
(3, 4 or AV mode).
3 Tune VCR to Cable Box output channel. 4 Select desired channel on Cable Box.
•You can only view the channel you’re recording.
•You cannot change channels with the VCR remote control.
To TV
TV
VCR
CATV Input
ANT. IN
TV
With this connection, you can view one scrambled cable channel while recording another unscrambled channel.
To watch TV with this type of connection
1
Press CH or NUMBER keys to select desired channel for recording.
2 Press TV/VCR to engage TV mode. 3 Tune TV to Cable Box output channel. 4 Select desired channel on Cable Box.
•You cannot record scrambled channels.
•To play back a tape, you must tune the Cable Box to the VCR output channel.
VCR
To TV
RF OUT
From VCR
Cable
INOUT
Box
PLUG & PLAY
The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually.
Z pg.11 – 15 of the HR-VP676U’s instruction manual)
(
1
Plug the VCR into the AC outlet.
2
4
During auto channel setting, the channel numbers are displayed as they are scanned and set. Receivable channels are automatically assigned to CH buttons, and non-receivable channels are skipped.
5
VHF ONLY
UHF
UHF ONLY
CABLE TV LINE
Note: Exact connector positions and names may differ.
CONNECTORS WHICH ARE OR MAY BE REQUIRED:
n VHF/UHF Antenna Mixern RF Cable n 300-75 ohm Matching
Transformer
n Antenna Splitter n Antenna Splitter
Don’t press any buttons on the VCR or remote
VHF
VHF
UHF
c–AUDIO/VIDEO CONNECTIONS
AV connection methods differ from one type of VCR to another. First, for any TV and VCR type, connect your VCR to your TV using RF connection. Then make AV connections following one of the methods pictured to the right.
After making the connections, go to 3
& PLAY)
MONAURAL VHS VCR g AV TV
.
VIDEO OUT
AUDIO OUT
To Listen To VCR Sound Through A Component Stereo Audio System,
Connect As Shown
(PLUG
VIDEO IN
AUDIO IN
VCR
Hi-Fi VHS VCR g AV STEREO TV
SUPER VHS VCR g AV STEREO TV WITH S-VIDEO INPUT TERMINALS
Monaural deck owners: Connect to VCR's AUDIO OUT
S-VIDEO OUT
VIDEO OUT
VIDEO INVIDEO OUT
AMP
L AUDIO INAUDIO OUT R
S-VIDEO IN
VIDEO IN
L AUDIO INAUDIO OUT R
TV
L
R
L
R
during auto setup.
When setting is complete, the VCR displays the current time. You can now use your VCR.
3
“AUTO” blinks while the VCR automatically sets the clock using information provided by the local PBS channel.
NOTES:
If the time displayed in is incorrect, perform the Semi-Auto or Manual Clock Set procedure
(refer to page 12 or 13 of the HR-VP676U’s instruction manual). Auto channel set has already taken place, and is not affected.
There are some PBS channels that do not transmit clock setting data. If your antenna cable is
properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer to page 13 of the HR-VP676U’s instruction manual). Auto channel setting has not yet taken place, so please also perform the “Set Receivable Channels” procedure (refer to page 14 of the HR-VP676U’s instruction manual).
5
Loading...