GY-HD250U Systems Reference Manual
Version 1.10
1
Table of contents
Fig. 1 Signal Flow between CCU and Camera
5
ypp
Sled M
HD250U Studio Syst
20
Fig.4 Signal Flow between Camera Adapter and Base Station
26
yp y g
POV Syst
t
39
Version 1.10
Section I Short Length Multi Core Studio Configurations
SD System Diagram
SD System Components price list
HD System Diagram with RM-HP250AU SYSTEM
HD System Diagram with RM-P210U
Fig 2 HD System Signal Flow between CCU and Studio Camera
HD System components price List
Section II Medium Length Fiber Cable Studio Configurations
Camplex System Diagram
Shoulder/Tripod mounted CP301C/CP701C studio system diagram
Fig.3 Signal Flow between Camera Adapter and Base Station
Shoulder/Tripod mountable studio components price list
ounted GY-
Sled Mounted GY-HD250U studio system price list
Section III Long Length Fiber Cable connected Studio Configurations
Telecast Fiber system with Power
Hand Held/w power studio system diagram
Hand Held/Tripod mounted with Power studio system price list
Sled Mounted/w Power studio system diagram
Sled mounted/w power studio system components price list
Extremely long length Telecast Fiber Studio System
Hand Held battery powered studio system diagram
Hand Held battery powered studio system components price list
Sled Mounted with battery power studio system diagram
Sled Mounted with battery power studio system components price list
Section IV POV System configuration
POV Pan/Tilt System
em Components Price Lis
em Diagram
Page
4
7
8
10
11
13
15
17
18
19
22
24
25
27
28
30
32
33
34
35
36
38
2
Table of contents
How to use Sony 26Pin Cable with KA
HD250U
41
Section VI Accessories
49
Version 1.10
Section V Supplementary Information
VF Signal Menu
How to use Sony 26Pin cable with RMP210U
GY-HD250U/KA-HD250U and JVC CCUs Power connectivity table
HD-SDI Cable Lengths
Telecast Fiber Rattler – Fiber Tx/Rx
KA-R25U Return Video Box
KA-BP250U Intermediate Plate
HD 1/3”mount bayonet lenses
V -R70P-JVC Marshall 7” LCD Studio Monitor
VC-Y250US XLR 4-pin Power Y cable
KA-P250U XLR 4-pin/20-pin Power cable
KA-V400U 6-pin/20-pin Viewfinder adapter
RM-LP25U Local Remote Control Panel
RM-HP250AU HD 26Pin CCU
VF-HP840U JVC’s Professional 8.4” Studio monitor
Page
40
42
42
43
43
44
45
46
47
48
50
51
52
54
3
Section I Short Length Multi Core Studio Configurations
/KA
V400U
Live video
4
SD S
Application
SD -production studio, Schools etc
Version 1.10
VF-P400U
w
-
VF-P400U
w/KA-V400U
House
Sync
DT-109
DT-109
VC-PxxxU Control cable
DT-109
RM-P210U
Switcher
SD Analog
Component
DT-109
VC-PxxxU Control cable
ystem Diagram
Version 1.10
or 4:3 SD images
Control
5
SD Studio Key features and user benefits
The GY-HD250U w/KA-HD250U can be used to construct an economical SD studio system that produces stunning 16:9
.
Investment is future proofed. Upgrading from an SD to an HD system will require changing the video interface only.
When replacing a GY-DV550U, the original CCU the RM-P210U; the 26pin control cable and the studio viewfinder VF-
P400U can continue to be used.
When needed, the GY -HD250U can be used as an ENG camera by detaching it from the KA-HD250U.
SD Composite
SD Component
Genloc k, VBS
Return Video
GY-HD250U/KA-HD250U
Audio(L,R)
Interco m(2 wire or 4 wi re)
Call/Tally
Power
Fig. 1 Signal Flow between CCU and Camera
RM-P210U
Version 1.10
SD CMP available only; RM
P210U can not pass full bandwidth HD Y, R
6
Additional Information
GY-HD250U View Finder menu should be set to RGB when VF-P400U is used. All VF displays are available except focus
assist
Genlock must be NTSC VBS only – HD Tri level sync can not be passed by RM-P210U back to the GY-HD250U.
Superimpose characters on Analog output should be turned off – otherwise they will appear at RM-P210U component
outputs.
Sony 26pin Cable can be used to connect RM-P210U with the KA-HD250U.
-
-Y, B-Y.
Version 1.10
GY-HD250U
P
r
0
$10,995.00
$0.00
With 16X L
VC-P110U
Multi core Camera Cable 5M
0
$480.00
$0.00
Up to 100m
Th 13X3.5BRM
Fujinon Wide Angle
0
$7,650.00
$0.00
HZ-FM15
Manual Focus Control
0
$685.00
$0.00
Canon 20X
ACM 17
2/3 to 2/3 Mount Converter
0
$799.00
$0.00
Total
$0.00
SD System Components price list
Model Description Quantity Cost Price Note
GY-HD250CHU Pro HD Camcorder 0 $9,995.00 $0.00 without 16X lens
ro HD Cam corde
KA -HD250U Studio Adapter 0 $3,000.00 $0.00
VF-P400U 4" Viewfinder 0 $875.00 $0.00
KA -V400U 20-pin/6-pin Adapter 0 $225.00 $0.00
RM-P210U Camera Control Unit 0 $1,995.00 $0.00
VC-P112U Multi core Camera Cable 20M 0 $1,050.00 $0.00
VC-P113U Multi core Camera Cable 50M 0 $1,850.00 $0.00
VC-P114U Multi core Camera Cable 100M 0 $3,250.00 $0.00
Optional Components
Th 17X5BRM Fujinon W ide Angle 0 $3,300.00 $0.00
HTs18x4.2BRM-M48 Fujinon 18x High Quality Lens 0 $10,800.00 $0.00
KT20x5BKRS Canon 20x High Quality Lens 0 $9,800.00 $0.00
HZ-FM13 Manual Focus Control 0 $685.00 $0.00 Fujinon 17X, 13X,17.18 X
ens
HZ FM-500 Manual Focus Control 0 $820.00 $0.00 Fujinon 16X
HZ-ZS13U Z oom Servo Control 0 $750.00 $0.00 Fujinon 16X
MS-11 Zoom & Focus Kit for Fuji 18X 0 $2,880.00 $0.00 Fujinon
ACM-12 1/2" to 1/3" Mount Converter 0 $799.00 $0.00
-
Total $0.00
Third Party Components
DT-109 Headset without connecting cable 0 $419.00 $0.00 Bey erDynamic
K109.38 DT-109 1.5m connecting cable 0 $49.50 $0.00 Bey erDy namic
"
"
7
Version 1.10
VF-HP840U
V-R70P-JVC w/KA-P250U
VF-HP840U
V-R70P-JVC w/KA-P250U
DT-109
DT-109
VC-PxxxU Control cable
RM-HP250AU
HD-SDI *
VC-PxxxU Control cable
DT-109
RM-LP25U
(RM-LP55U/LP57U)
HD SDI Switcher
HD-SDI*
or
DT-109
House sync
RM-LP25U
(RM-LP55U/LP57U)
HD System Diagram with RM-HP250AU SYSTEM 1 (HD SDI)
* Either the HD-SDI outputs of the RM-HP250AU derived from the HD component signal or the HD-SDI output of the GYHD250U can be applied to the HD-SDI switcher inputs.
8
Version 1.10
V-R70P-JVC w/KA-P250U
VF-HP840U
V-R70P-JVC w/KA-P250U
VF-HP840U
DT-109
DT-109
VC-PxxxU Control cable
RM-HP250AU
VC-PxxxU Control cable
DT-109
RM-LP25U
(RM-LP55U/LP57U)
HD Analog Switcher
HD Analog
Component
DT-109
House sync
RM-LP25U/LP55U/LP57U
HD System Diagram with RM-HP250AU SYSTEM 2 (HD analog component)
* The component HD signal output of the RM-HP250AU can be applied to a HD component analog switcher.
9
Version 1.10
V-R70P-JVC w/KA-P250U
VF-HP840U
V-R70P-JVC w/KA-P250U
VF-HP840U
DT-109
DT-109
VC-PxxxU Control cable
DT-109
RM-P210U
HD SDI Switcher
HD-SDI
VC-PxxxU Control cable
House sync
DT-109
HD System Diagram with RM-P210U
10
Version 1.10
continue to be used
Intercom(2 wire or 4 wire)
HD Studio Key features and user benefits
The GY-HD250U w/KA-HD250U can be used to build an economical HD studio system that produces stunning images.
Both HD component and HD-SDI video is supported giving user flexibility of using a component switcher or a HD-SDI
switcher.
The new RM-HP250AU gives the user the flexibility of connecting an additional local remote control to the studio system.
A live 720P or 1080i signal can be outputted depending on the user’s switcher requirements.
When replacing a GY-DV550U based studio system, the original 26pin control cable and studio viewfinder VF-P400U can
.
Existing user’s 26Pin Sony Cable can be used to connect RM-HP250AU and KA-HD250U.
When needed, the GY -HD250U can be readily detached from the KA-HD250U(Sled) and used as an ENG camera.
SD Composite
SD Component/HD Compo nent
Genlock, VBS/Tri-level sync
GY-HD250U w/KA-HD250U
RED- with RM-HP250AU
Return Video
RM-HP250AU/RM-P210U
Audio(L,R)
Call/Tally
Control
Power
Fig 2 HD System Signal Flow between CCU and Studio Camera
HD-SDI
11
Additional Information
Set the GY
HD250U Vi
Do not turn on Superimpose characters on the HD
-
SDI output
When using a HD Monitor(VF-HP840U or V-R70P-JVC), as a view finder and a component switcher:
Turn the Analog characters. Menu setting in the GY-HD250U to OFF.
-
When using a HD Monitor (V-R70P-JVC), as a view finder and a Digital switcher:
ew Finder menu to Component.
Turn the Analog output superimpose characters Menu setting for the HD-SDI output on the GY-HD250U to OFF.
Set the GY-HD250U View Finder menu to Component.
If a VF-P400U is used as the view finder, set the GY-HD250U’s View Finder menu to RGB.
.
Set GY-HD250U TALLY MENU setting to “STUDIO”.
Version 1.10
12
HD System components price List
GY -HD250CHU
Pro HD Camcorder
0
$9,995.00
$0.00
Camcorder without lens
VR70P-JVC
7" HD LCD Monit
0
$1,810.00
$0.00
RGB
V
Model Description Quantity Cost Price Note
GY - HD250U Pro HD Camcord er 0 $10, 995.00 $0.00 With 16X len s
K A-HD250U Studio Adapter 0 $3,000.00 $0.00 with Y cab le up to 70m
VF-P400U 4" S D Viewfinder 0 $875.00 $0.0 0 B & W SD VF
KA-V400U 20-pin/6-pin Adapter 0 $225.00 $0.00 Pwr & Signal cable Availability to be determined
or
VCY250US Y X LR Power Cable 0 $75. 00 $0.00 Use wh en 26 Pin cab le is less t han 70m
K A-P250 Delayed power cab le 0 $450.00 $0.0 0 Use wh en 26Pin Cabl e > 70m wi th 7" LCD M onit o r
RM-P210U SD Camera Control 0 $1,995.00 $0.00
R M - HP250A U H D Camera Con t rol 0 $3,495. 00 $0.0 0 Shi pping -T BA
C - P 110U Came ra Cabl e 5M 0 $480.00 $0.00
VC-P112U C amera Cable 20M 0 $1,050.00 $0.00
VC-P113U C amera Cable 50M 0 $1,850.00 $0.00
VC-P114U Camera Cable 100M 0 $3,250. 00 $0.00
Options
Th13X3. 5BRM Fujinon Wi de A ngle 0 $7, 650.00 $0.00
Th17X5BRM Fuj inon Zoom Lens 0 $3,300.00 $0.00
HTs18x4.2BRM Fujinon 18x High Quality Lens 0 $10,800.00 $0.00
KT20x5BKRS Canon 20x High Quality Lens 0 $9,800.00 $0.00
H Z-FM15 Man u a l Focus Control 0 $685.00 $0.0 0 Can on 20X
H Z-FM13 Man u a l Focus Control 0 $685.00 $0.0 0 F ujinon 17X , 13X
H Z-FM500 Manu a l Focus C ontro l 0 $685.00 $0.00 F u jinon 16X
H Z-ZS13U Z oom Servo Contro l 0 $750.00 $0.00 Fujinon 13X ,16X,17X , 18X & Canon 20X
cable + Articulated arm
Version 1.10
13
HD System components price List(continued)
MS 11
Zoom & Focus Kit 18X
0
$2,880.00
$0.00
F ujinon 18x
RM-LP25U
Remote Control
0
$0.00
$0.00
Price & Shipping TBA
4
Model Description Qua ntity Cost Price Note
A CM-12 1/2 "> 1/3" Mou nt Conv e rt er 0 $799.00 $0.00
A CM-17 1/2 "> 2/3" Mou nt Conv e rt er 0 $799.00 $0.00
R M - LP55U Remo t e Con t rol 0 $815.00 $0.00
R M - LP57U Remo t e Con t rol 0 $910.00 $0.00
Total 0 $0.00
Thir d P ar t Components
D T-109 H eadset 0 $419.00 $0.00 Third part y v endor
K109.38 1.5m DT-109 Connecting cable 0 $49.50 $0.00
RG-59 HD-SDI Cable 0 $0.00 Belden, Canare
RG-6 HD-SDI Cable 0 $0.00 Belden, Canare
RG-11 HD-SDI Cable 0 $0.00 Belden, Canare
Total $0.00
Version 1.10
1
Version 1.10
Medium length Fiber Cable Studio Configurations are used for EFP, Sports and Events requiring the CCU to be located
hybrid cables to connect the camera to the CCU.
Hybrid Cable
The C
ith additi
bli
5
The center conductor in the coax carries both power and all the required signals between the Base station and the Camera
Section II Medium Length Fiber Cable Studio Configurations
T y pical Applications
more than 100m from the Camera’s location. When multi-core cable lengths exceed 100m, the multi-Core cable weight
becomes excessive. For lengths greater than 100m a fiber cable can be used for applications that do not need power to be
delivered to the camera or a hybrid (combined fiber and copper cable) that also delivers power is used to connect the Studio
Camera to the base station. Camplex and Telecast Fiber are two companies that produce systems that use either fiber or
CAMPLEX
CAMPLEX produces economical hybrid cable connected systems that integrate with the GY-HD250U. Their system consists
of a Camera Adapter mounted on the Camera, a Hybrid Fiber Cable and a Base Station.
CP-301C/CP-701C
Base Station (CCU)
Camera Adapter
Power and Signals
GY-HD250U
Cabling
Camplex System Diagram
amera Adapter w
onal ca
ng provides a signal interface between the camera and the Hybrid Cable.
The Hybrid cable consists of a coaxial cable whose center conductor gauge depends on the customer’s power
requirements and a fiber cable. Both are enclosed in a single sheath.
The Fiber cable carries the HD-SDI optical signal back to the base station where it is converted back to an electrical signal
HD-SDI signal.
adapter.
1
Version 1.10
D
(CP301C
–
2lbs/CP701
6
Camplex System Key features and Customer Benefit
z Complex's (CP-301C and CP-701C) systems provide an economical medium cable length (up to 900m) solution.
z
ue to the camera adapter’s light weight
operated for long periods of time without fatiguing the user.
z The CP-301C CCU and the CP-701C CCU primarily differ in their signal handling capabilities. The CP-701C can pass
Component SD signals between the camera and the base station and has a asynchronous return video path back to the
camera.
Limitations
Maximum cable length is limited to 900m with RG11.
The Hybrid cable becomes very heavy as the cable length increases.
If the cable is abused, internal fiber or coax can be damaged. It is not as reliable and robust as the tactical fiber cable. In
the case that the optical fiber is damaged a spare fiber that is part of the cable can be substituted.
The CP-301C can pass an HD Tri level genlock signal, but the CP-701C can not pass an HD Tri level genlock signal.
-2.5 lbs) the camera can be shoulder mounted and
1
Version 1.10
KAR25
U
Signal
Battery Powered
Hybrid Cable- BNC and ST
Fiber connectors
BKW - V mount Plate
DT-109
CP-301C/CP-701C
(RM-LP55U/
DT-109
Power
Cabling
RM-LP25U
LP57U)
-
GY-HD250U
HD-SDI
HD-SDI Switcher
900m
Base Station CP301C/CP701C
Shoulder/Tripod mounted CP-301C/CP-701C studio system diagram
17
SD Composite
SCoposte
r
p
Base Station
Call
lly
SD Component
HD/SD SD I
Genlock(Black Burst)/Tri-level sync
Async hronous Return Video
Program Audio 1
Program Audio 2
Intercom(2 wire or 4 wire)
Version 1.10
Exclusive CP701 system only feature in red
Exclusive CP301 system only feature in blue
Camera Adapte
or Tally, Call+Ta
IFB or Retrun Audio or Timecode
Control
Power(48 watts, 4 amps)
Fig 3. Signal Flow between Camera Adapter and Base Station
18
Loading...