JVC GR-FX23, GR-FX33, GR-FX43, GR-FX53 User Manual

COMPACT VHS CAMCORDER

GR-FX53
GR-FX43
GR-FX33
GR-FX23

ENGLISH

INSTRUCTIONS

LYT0341-001B

EN

2 EN

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information
and precautions contained in the following pages to ensure safe use of this product.

Using This Instruction Manual

•All major sections and subsections are listed in the Table Of Contents (Z pg. 3).

•Notes appear after most subsections. Be sure to read these as well.

•Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (Z pg. 52 – 54) and familiarize yourself with button locations, etc. before use.

.... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe

use of this product.

You are recommended to carefully read the cautions on pages 55 and 56 before use.

SAFETY PRECAUTIONS

WARNING:
TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.

Warning on lithium cell battery (for clock
operation and remote control unit)

The battery used in this device may present a fire
or chemical burn hazard if mistreated. Do not
recharge, disassemble, heat above 100°C or
incinerate.
Replace the battery with Maxell, Panasonic
(Matsushita Electric), Sanyo or Sony CR2025; use
of another battery may present a risk of fire or
explosion.

n Dispose of used battery promptly.
n Keep away from children.
n Do not disassemble and do not dispose of in

fire.

CAUTIONS:

n If you notice smoke or a peculiar smell coming

from the camcorder or AC adapter/charger, shut
it down and unplug it immediately. Continue
using the camcorder or AC adapter/charger
under these conditions could lead to fire or
electric shock. Contact your JVC dealer. Do not
attempt to repair the malfunction yourself.

n To prevent shock, do not open the cabinet. No

user serviceable parts inside. Refer servicing to
qualified personnel.

n When you are not using the AC Power

Adapter/Charger for a long period of time, it is
recommended that you disconnect the power
cord from AC outlet.

NOTES:

●

The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of
the main unit.

●

The rating plate (serial number plate) of the AC
Power Adapter/Charger is on its bottom.

This camcorder is designed to be used with PAL­type colour television signals. It cannot be used
for playback with a television of a different
standard. However, live recording and view­finder playback are possible anywhere. Use the
BN-V12U/V20U battery packs and, to recharge
them, the provided multi-voltage AC Power
Adapter/Charger. (An appropriate conversion
adapter may be necessary to accommodate
different designs of AC outlets in different
countries.)

This unit is produced to comply with Standard
IEC Publ. 65.

n Camcorder is designed exclusively for the

VHS-C video cassette. Only cassettes marked
VHS-C can be used with this unit.

n HQ VHS is compatible with existing VHS

equipment.

MAJOR FEATURES

CONTENTS

EN3

EN3

n Programme AE with Special Effects

(

Z pg. 20 – 21)

•Electronic Fog Filter •ND Effect

•Sepia •Twilight •Sports •Nega/Posi

•1/2000 sec. High Speed Shutter

n Snapshot (GR-FX53 only) (
n 5-Sec. Recording (GR-FX43/FX33/FX23

only) (Z pg. 16)

n Menu Adjustment (
n Picture Stabilizer (
n Digital Hyper Zoom (
n Integrated Auto Light (GR-FX53 only)

(Z pg. 17)

Z pg. 16)

Z pg. 18)

Z pg. 24, 25, 26)

Z pg. 14)

PROVIDED ACCESSORIES

•AC Power Adapter/
Charger AA-V15EG

•Remote Control

RM-V700U
(GR-FX53 only)

•Battery Pack
BN-V12U

•Cassette Adapter
C-P7U (GR-FX53/
FX43/FX33 only)

•Remote Control

Unit RM-V705U
(GR-FX43 only)

•Editing Cable

(GR-FX53 only)

GETTING STARTED

4 – 11

Power ............................................ 4

Clock (Lithium) Battery Insertion/

Removal ........................................ 6

Date/Time Settings............................. 7

Recording Mode Setting ....................... 8

Tape Length Setting............................. 8

Loading/Unloading A Cassette ............... 9

Grip Adjustment ............................... 10

Viewfinder Adjustment ...................... 10

Shoulder Strap Attachment .................. 11

Tripod Mounting ............................... 11

RECORDING

12 – 33

Basic Recording................................ 12

Basic Features ................................. 14

Advanced Features............................ 18

PLAYBACK

34 – 39

Basic Playback................................. 34

Features ........................................ 35

Using The Cassette Adapter .................37

Basic Connections And Tape Dubbing .......38

USING THE REMOTE
CONTROL UNIT

Random Assemble Editing ................... 42

Insert Editing .................................. 46

Audio Dubbing ................................. 47

TROUBLESHOOTING

INDEX

Controls, Connectors And Indicators ....... 50

Indications ..................................... 52

CAUTIONS

40– 47

48 – 49

50 – 52

53 – 54

SPECIFICATIONS

55

•Audio/Video
(A/V) cable

•Shoulder Strap

•DC Cord

•Lithium Battery CR2025

• x1 for GR-FX33/FX23
(clock operation)

• x2 for GR-FX53/FX43
(clock operation and
remote control)

OPTIONAL ACCESSORIES

55

4 EN

Marks

CHARGE indicator

REFRESH switch

REFRESH indicator

REFRESH

The AC Power Adapter/Charger features a
REFRESH function that allows you to fully
discharge the battery pack before recharg­ing.
Perform the REFRESH function after no less
than 5 chargings.

To discharge the battery . . .

.... attach the battery pack to the adapter as

shown in the above illustration. Then
push REFRESH. The REFRESH indicator
lights when discharging starts, and goes
out when discharging is complete.

To AC outlet

GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you choose
the most appropriate source of power.

NOTES:

●

No function is available without power supply.

●

Use only the specified power supply.

●

Do not use provided power supply units with other
equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

1

Connect the charger’s AC power cord to a wall outlet.

ATTACH BATTERY PACK

2

Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.

•The CHARGE indicator begins blinking to indicate
charging has started.

DETACH BATTERY PACK

3

When the CHARGE indicator stops blinking but stays lit,
charging is finished. Slide the battery pack opposite the
direction of the arrow.

Battery pack Charging time Discharging time

BN-V12U approx. 1 hr. 10 min. approx. 3 hrs. 30 min.
BN-V20U approx. 1 hr. 50 min. approx. 6 hrs. 40 min.

Hook on.

A

Push in.

B

BATTERY RELEASE

ATTENTION:

Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.

USING THE BATTERY PACK

ATTACH BATTERY PACK

1

Hook its end to the camcorder ( ) and push the battery
pack in until it locks in place ( ) .

DETACH BATTERY PACK

2

Slide BATTERY RELEASE and pull out the battery pack.

Approximate recording time (unit: min.)

Battery pack

BN-V12U 75 (40) 75
BN-V20U 115 (70) 115

( ) : when the video light is on (GR-FX53 only).

GR-FX53 GR-FX43/FX33/FX23

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery pack
and AA-V80EG AC Power Adapter/Charger.
The BN-V856U battery pack provides approx. 7 hours of
recording time when the video light is off. Also read thor­oughly the VU-V856KIT’s instruction manuals.
It is impossible to charge the BN-V856U battery pack using
the provided AC Power Adapter/Charger. Use the optional
AA-V80EG AC Power Adapter/Charger.

EN5

Charge Marker

Charge marker

A charge marker is provided on the battery pack to
help you remember whether it has been charged or
not. Two colours are provided (red and black)—you
choose which one means charged and which means
discharged.

NOTES:

●

The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the
frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.

●

Charging times noted on page 4 are for a fully discharged battery pack, and discharging times are for a fully
charged battery pack.

●

Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●

Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.

●

Perform the REFRESH function after no less than 5 chargings.

●

While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does
not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/
Charger to store it.

●

High temperatures can damage the battery pack, so use only where good ventilation is available. Do not
allow it to discharge in a container, such as a bag.

●

If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter’s AC cord.

●

Remove the battery pack from the adapter immediately after discharging.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●

Make sure you unplug the DC cord before charging or discharging the battery pack.

●

The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been
stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The
CHARGE indicator should blink during recharging. If not, contact your nearest JVC dealer.

GETTING STARTED

To DC IN jack

DC OUT
terminal

DC Cord

Car Battery
Charger/Adapter
BH-V3E (optional)

AC Power
Adapter/Charger
AA-V15EG

To AC outlet

To car’s
cigarette
lighter socket

USING AC POWER

Use the AC Power Adapter/Charger (connect as
shown in the illustration).

NOTES:

●

The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.

●

When using the DC cord, make sure you connect
the end of the cord with the core filter to the
camcorder. The core filter reduces interference.

USING A CAR BATTERY

Use the optional Car Battery Charger/Adapter
(connect as shown in the illustration).

NOTES:

●

When using the car battery, leave the engine
idling.

●

The optional Car Battery Charger/Adapter (BH-V3E)
can also be used to charge the battery pack (except
BN-V20U/V856U).

●

When using the optional Car Battery Charger/
Adapter, refer to the respective instruction booklet.

6 EN

Battery holder

Slot

GETTING STARTED

(cont.)

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to
perform date/time settings.

SWITCH OFF POWER

1

Switch off the unit’s power and remove the power
supply unit (battery pack, AC Power Adapter/Battery
Charger, etc.).

REMOVE BATTERY HOLDER

2

Pull out the battery holder.

INSERT BATTERY IN HOLDER

3

Insert the battery in the holder, and be sure to have
the “+” mark visible.

RE-INSERT HOLDER

4

Slide the holder back into the slot until you hear a
click.

NOTES:

●

See “SAFETY PRECAUTIONS” (Z pg. 2) for information
on safe handling of lithium batteries.

●

To avoid losing the battery and/or battery holder, place
the camcorder with the grip side up as shown in the
illustration when inserting/removing the battery.

MENU Button

Select Dial

Display

4

NEXT
M . W . B .
D . ZOOM
TELE MACRO

DATE TIME

TAPE LENGTH

4

RETURN

DATE TIME

YEAR

MONTH

DAY

TIME

EXIT

4

NEXT
M . W . B .
D . ZOOM
TELE MACRO
DATE TIME
TAPE LENGTH

4

RETURN

AUTO
ON
OFF

T45

AUTO
ON
OFF

T45

1999

22 : 50

Power lamp

Power Switch

Menu Screen

DATE/TIME Menu

1
1

24-hour indication

EN7

Date/Time Settings

ACCESS MENU SCREEN

1

Set the Power Switch to “PRO.”, then press MENU.

•The power lamp comes on.

SELECT FUNCTION

2

Rotate the Select Dial to move the highlight bar to
“DATE/TIME”, then press it. The DATE/TIME Menu
appears.

•If you decide you want to return the date and time
to the previous settings, rotate the Select Dial to
move the highlight bar to “EXIT” and press it, then
go to step 6.

•If you want to set only the time without changing
the date, go to step 4.

SET DATE

3

Rotate the Select Dial to move the highlight bar to the
item you want to set and then press it. When the
setting begins blinking, rotate the Select Dial until the
correct setting appears and then press it. The setting
stops blinking.

•Repeat this procedure until you’re satisfied with the
Date settings (“YEAR”, “MONTH” and “DAY”).

SET TIME

4

Rotate the Select Dial to move the highlight bar to
“TIME” and then press it. When the hour setting
begins blinking, rotate the Select Dial until the correct
setting appears and then press it. When the hour
setting stops blinking and the minute setting begins
blinking, rotate the Select Dial until the correct setting
appears and then press it. The minute setting stops
blinking.

START CLOCK OPERATION

5

When none of these settings (YEAR, MONTH, DAY,
TIME) blinks, rotate the Select Dial to move the
highlight bar to “EXIT”, and press it. The Menu
Screen reappears with the highlight bar on
“RETURN”.

CLOSE MENU SCREEN

6

Press the Select Dial.

NOTE:

To display the date and time in the camcorder’s display
and on a connected TV, see “Date/Time Insert”
(Z pg. 22).

GETTING STARTED

8 EN

4

NEXT
M . W . B .
D . ZOOM
TELE MACRO
DATE TIME

TAPE LENGTH

4

RETURN

T30
T45

T60

MENU Button

SP/LP Recording
Mode Button

Select Dial Power Switch

Viewfinder

T45

SP

Display

TAPE LENGTH

AUTO
ON
OFF

T45

Tape length indicator

Recording mode
indicator

Menu Screen

TAPE LENGTH
Setting Menu

GETTING STARTED

(cont.)

Recording Mode Setting

Set depending on your preference.

SET RECORDING MODE

1

First set the Power Switch to “AUTO” or “PRO.”.
Press SP/LP for more than 1 second. “SP” (Standard
Play) provides higher picture and sound quality and is
better for dubbing, while “LP” (Long Play) is more
economical, providing twice the recording time.

NOTE:

If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.

Tape Length Setting

Set the tape length according to the length of the tape
used.

ACCESS MENU SCREEN

1

First set the Power Switch to “PRO.”. Press MENU.

SELECT FUNCTION

2

Rotate the Select Dial to move the highlight bar to
“TAPE LENGTH”, then press it. The TAPE LENGTH
Setting Menu appears.

SET TAPE LENGTH

3

Rotate the Select Dial to move the highlight bar to the
correct setting. T30 = 30 minutes of recording time,
T45 = 45 minutes, and T60 = 60 minutes.

•If you decide you want to return the tape length to
the previous setting, rotate the Select Dial to move
the highlight bar to “EXIT”.

CLOSE MENU SCREEN

4

Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.

NOTE:

The tape remaining time (Z pg. 13) displayed in the
viewfinder is correct only if the correct tape length has
been selected.

EXIT

4

NEXT
M . W . B .
D . ZOOM
TELE MACRO
DATE TIME
TAPE LENGTH

4

RETURN

AUTO
ON
OFF

T60

Cassette holder

Loading/Unloading A Cassette

OPEN CASSETTE HOLDER

1

Slide EJECT until the holder opens. Do not use force
to open.

INSERT/REMOVE CASSETTE

2

Make sure the label is facing outward.

EN9

EJECT SwitchPUSH Button

Erase Protection Gear

Turn to take
up slack.

CLOSE CASSETTE HOLDER

3

Press PUSH and make sure the holder is closed and
locked.

NOTES:

●

The cassette holder can’t be opened unless a power
supply is attached.

●

Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.

●

Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes
have removable tabs. If the tab has been removed, cover
the hole with adhesive tape.

●

The cassette holder cannot be opened while the
camcorder is in the record mode.

GETTING STARTED

10 EN

Power Zoom Lever

Recording Start/Stop Button

33

22

180°180

°

GETTING STARTED

Grip Adjustment

EXPAND LOOP

1

Separate the Velcro strip.

INSERT HAND

2

Pass your right hand through the loop and grasp the
grip.

ADJUST STRAP LENGTH

3

Adjust so your thumb and fingers can easily operate
the Recording Start/Stop Button and Power Zoom
Lever. Refasten the Velcro strip.

Viewfinder Adjustment

SELECT OPERATION MODE

1

Set the Power Switch to “CAMERA” (“AUTO” or
“PRO.”).

POSITION VIEWFINDER

2

Adjust the viewfinder manually for best viewability
(see illustration on left).

(cont.)

PAUSE

1

Set “POWER” to
“CAMERA”
(“AUTO” or “PRO.”)

ADJUST DIOPTRE

3

Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.

2

4

3

1

EN11

Shoulder Strap Attachment

ATTACH STRAP

1

Following the illustration at left, thread the strap
through the top of the eyelet 1, then fold it back and
thread it through the buckle 2. Repeat the procedure
to attach the other end of the strap to the other eyelet

3, making sure the strap is not twisted.

ADJUST LENGTH

2

Adjust as shown in the illustration at left 4.

Tripod Mounting

ALIGN AND TIGHTEN

1

Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.

CAUTION:

When using a tripod, be sure to open and extend
its legs fully to stabilise the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.

GETTING STARTED

12 EN

EJECT Switch

Recording Start/Stop Button

LENS COVER Open/Close Ring

Power Switch

Power lamp

Power Switch

Tally lamp
(lights while recording is in progress)

RECORDING

Basic Recording

NOTE:

You should already have performed the procedures listed
below. If not, do so before continuing.

●

Power (Z pg. 4)

●

Recording Mode Setting (Z pg. 8)

●

Tape Length Setting (Z pg. 8)

●

Grip Adjustment (Z pg. 10)

●

Viewfinder Adjustment (Z pg. 10)

LOAD A CASSETTE

1

Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.

ENTER RECORD-STANDBY MODE

2

Turn the LENS COVER Open/Close Ring to open the
lens cover, then set the Power Switch to “CAMERA”
(“AUTO” or “PRO.”).

•The power lamp lights and the camcorder enters the
Record-Standby mode.

•The scene you are aimed at appears on the
viewfinder screen, with the word “PAUSE”
superimposed upon it.

START SHOOTING

3

Press the Recording Start/Stop Button.

•“ ” appears in the viewfinder while recording is
in progress.

Power Switch Position

According to the Power Switch position you have selected, the following functions are available:

AUTO
(Full Auto mode):

Allows you to record using
NO special effects or manual
adjustments. Suitable for
standard recording.

Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.

PRO.
(PRO. mode):

POWER OFF:

Allows you to switch off the
camcorder.

Tape remaining time indicator

25MIN

Recording Start/Stop Button

DISPLAY Button

MIN

(Now calculating)

120MIN

119MIN

3MIN

2MIN

(Blinking)

1MIN

(Blinking)

0MIN

(Blinking)

EN13

STOP RECORDING

4

Press the Recording Start/Stop Button again to stop
recording.

•The camcorder re-enters the Record-Standby mode.

NOTES:

●

The cassette holder cannot be opened unless a power
supply is attached.

●

There may be a delay after you slide EJECT until the
holder opens. Do not use force.

●

The tape remaining time is displayed in the viewfinder
as shown.

●

The remaining time indicated in the viewfinder is
approximate.

●

The time required to calculate the remaining tape
length, and the accuracy of the calculation, may vary
according to the type of tape used.

●

The tape remaining time indicator is correct only if the
correct tape length has been selected (Z pg. 8).

●

“TAPE END” appears when the tape reaches its end, and
the power goes off automatically if left in this condition
for 5 minutes. “TAPE END” also appears when a cassette
whose tape is already at its end is loaded.

●

If the Record–Standby mode continues for 5 minutes
without performing Zoom or any other operations, the
camcorder’s power shuts off automatically. Set the
Power Switch to “POWER OFF”, and then back to
“CAMERA” to turn the camcorder on again.

●

If the Recording Start/Stop button is pressed after the
Record-Standby mode has continued for over
5 minutes, recording may not start immediately.

●

If you are recording on a cassette from the middle (such
as when a tape is removed and re-inserted during
recording), use the Retake function (Z pg. 15) to find
the end of the last recording so you don’t erase any of it.

●

The LENS COVER warning blinks for about 5 seconds
when the camcorder is turned on with the cover closed.

●

To turn the tally lamp off during recording, refer to
pg. 24 and 26.

RECORDING

Viewfinder Indications

Press DISPLAY to make the following indications appear/
disappear from the camcorder’s display: cassette warning,
tape remaining time, battery pack remaining power
indicator and tape length indicator (Z pg. 52).

PRESS DISPLAY BUTTON

1

To turn off the indications, press DISPLAY for more
than 1 second.
Press again for more than 1 second to make the
indications reappear.

NOTE:

Even if the indications are off, the tape remaining time
appears blinking when the tape is near its end, and the
battery pack remaining power indicator appears blinking
when the power is almost gone.

14 EN

RECORDING

Basic Features

Zoom in

Display

Zoom indicator bar

1X

Zoom level indicator

Approximate zoom ratio

Power Zoom Lever

Zoom out

FEATURE:

Zooming

PURPOSE:

To produce the zoom in/out effect, or an instantaneous
change in image magnification.
Digital circuitry extends the maximum magnification
offered by optical zoom. This system is called Digital
Zoom.

OPERATION:

Zoom In
Push the Power Zoom Lever towards “T”.

Zoom Out
Push the Power Zoom Lever towards “W”.

n The quicker you push the Power Zoom Lever, the

quicker the zoom action.

NOTES:

●

Focusing may become unstable during Zooming. In
this case, set the zoom while in Record–Standby,
lock the focus by using the manual focus
(Z pg. 29), then zoom in or out in Record mode.

●

The zoom level indicator (5) moves during zoom.
Once the zoom level indicator reaches the top of
the zoom indicator bar, all magnification from that
point is through digital processing.

●

When using Digital Zoom, the quality of image may
suffer. To deactivate Digital Zoom, set “D.ZOOM”
to “OFF” in the Menu Screen (Z pg. 25).

Power Switch

EN15

RETAKE (R/F) Button

FEATURE:

Quick Review

PURPOSE:

To check the end of the last recording.

OPERATION:

1) Press “ ” and release quickly during the Record–

Standby mode.

n Tape is rewound for about 2 seconds and played

back automatically, then pauses in Record–Standby
mode for the next shot.

NOTE:

Distortion may occur at the start of playback. This is
normal.

FEATURE:

Retake

PURPOSE:

To re-record certain segments.

OPERATION:

1) Make sure the camcorder is in the Record–Standby

mode.

2) Press either RETAKE to reach the start point for new
recording. Pressing “F” forwards the tape and
pressing “R” reverses it.

3) Press the Recording Start/Stop Button to start
recording.

NOTE:

Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.

RECORDING

16 EN

5 SEC. REC Button

Display

PAUSE

5S

5 Sec. Rec mode indicator

Picture stabilizer indicator

P. STABILIZER Button

Power Switch

RECORDING

FEATURE:

Picture Stabilizer

Basic Features (cont.)

PURPOSE:

To compensate for unstable images caused by camera­shake, particularly at high magnification.

OPERATION:

1) Press P. STABILIZER. “ ”appears.

n To switch off the Picture Stabilizer, press

P. STABILIZER. The indicator disappears.

NOTES:

●

Accurate stabilisation may not be possible if hand
shake is excessive, or under the following condi­tions:

•

When shooting subjects with vertical or horizontal
stripes.

•

When shooting dark or dim subjects.

•

When shooting subjects with excessive
backlighting.

•

When shooting scenes with movement in various
directions.

•

When shooting scenes with low-contrast back­grounds.

●

Switch off the Picture Stabilizer when recording
with the camcorder on a tripod.

●

The “ ” indicator appears blinking if the
Stabilizer cannot be used.

FEATURE:

5Sec. Rec (5-sec. Recording)

(GR-FX43/FX33/FX23 only)

PURPOSE:

To record a scene for 5 seconds, providing quick scene
transitions like those seen in TV programmes.

OPERATION:

1) During Record–Standby, press 5SEC. REC “ 5S”

appears and 5Sec. Rec is reserved.

2) Press the Recording Start/Stop Button. Recording
starts, and after 5-second recording is finished, the
camcorder reenters the Record–Standby mode
automatically.

n To cancel the 5Sec. Rec. function, press 5SEC. REC

again so that “ 5S” disappears.

NOTE:

Fade/Wipe (Z pg. 19) cannot be activated by
pressing 5SEC. REC.

EN17

LIGHT OFF/AUTO/ON Switch

DANGER

n The video light can become extremely

hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.

n Do not place the camcorder into the

carrying case immediately after using the
video light, since it remains extremely
hot for some time.

n When operating, keep a distance of

about 30 cm between the video light and
people or objects.

n Do not use near flammable or explosive

materials.

n It is recommended that you consult your

nearest JVC dealer for replacing the video
light.

FEATURE:

Video Light (GR-FX53 only)

PURPOSE:

To brighten the scene when natural lighting is too dim.

OPERATION:

1) Set the LIGHT OFF/AUTO/ON Switch as required:

OFF : Turns off the light.
AUTO : Automatically turns on the light when the

ON : Always keeps the light on as long as the

n The video light can only be used with the

n It is recommended to set the white balance

n When not using the video light, turn it off to save

camcorder senses insufficient lighting on the
subject.

camcorder is turned on.

camcorder’s power on.

(Z pg. 30) to when you use the video light.

battery power.

NOTES:

●

Even if the battery indicator ( ) does not blink if
the battery pack’s charge is low, the camcorder may
turn off automatically when you turn on the video
light, or when you start recording with the video light
turned on.

●

When the LIGHT OFF/AUTO/ON Switch is set to
“AUTO”:

•

Depending on the lighting conditions, the video
light may keep turning on and off. In this case,
manually switch the light on or off using the
LIGHT OFF/AUTO/ON switch.

•

While the “Sports” or “High Speed Shutter” mode
(Z pg. 21) is engaged, the light is likely to stay on.

•

While the “Twilight” mode (Z pg. 21) is engaged,
the light will not activate.

RECORDING