JVC EVERIO R GZ-R440 User Manual

Download

Page 1

CAMCORDER

GZ-R440

Detailed User Guide

C6B5_R440_US_EN

Page 2

Table of Contents

Getting Started

Verifying the Accessories ........................................................ 3

Turning on this Unit ..................................................................

Opening the Terminal Cover (SD Card Cover) ........................ 4

Charging .................................................................................. 5

Resetting this Unit .................................................................... 5

Quad Proof .............................................................................. 6

Before Using Underwater or under Low Temperature .......... 6

Grip Adjustment ....................................................................... 8

Attaching the Core Filter .......................................................... 8

Inserting an SD Card ............................................................... 9

Types of Usable SD Card ..................................................... 9

Using the Touch Screen ........................................................ 10

Locking the Screen (when Shooting Underwater) .............. 10

Adjusting the Touch Screen ............................................... 11

Names of Buttons and Functions on the LCD Monitor ....... 12

Clock Setting ......................................................................... 15

Resetting the Clock ............................................................ 15

Changing the Display Language ............................................ 16

Holding this Unit .................................................................... 17

Tripod Mounting .................................................................... 17

Using this Unit Overseas ....................................................... 18

Charging the Battery Pack Overseas ................................. 18

Setting the Clock to Local Time when Traveling ................. 18

Setting Daylight Saving Time ............................................. 19

Optional Accessories ............................................................. 19

Recording

Taking Videos in Auto Mode .................................................. 20

Capturing Still Images During Video Recording

Taking Still Images in Auto Mode ........................................... 23

Zooming ................................................................................ 26

Manual Recording ................................................................. 27

Adjusting Focus Manually (FOCUS) .................................. 28

Adjusting Brightness .......................................................... 29

Setting Backlight Compensation ........................................ 30

Setting White Balance ........................................................ 31

Taking Close-up Shots (TELE MACRO) ............................ 32

Shooting under Water ............................................................ 33

Recording with Effects (RECORDING EFFECT) ................... 35

Recording Images Like an Old Black and White Photo

(GRAINY MONOCHROME) ........................................... 35

Recording Food Images (FOOD) ....................................... 36

Recording Images of a Baby (BABY) ................................. 37

Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) ....... 39

Reducing Camera Shake ....................................................... 40

Recording at Intervals (TIME-LAPSE RECORDING) ............. 41

Using the Self-timer ............................................................... 43

Recording at a Fixed Interval and Playing Back Repeatedly .. 45

Recording Videos with Date and Time ................................... 46

Recording Videos with Time Counter .................................... 47

Checking the Remaining Recording Time ............................. 48

Playback

Playing Back Videos .............................................................. 50

Normal Playback

Checking the Recording Date and Other Information ......... 53

TIME COUNTER PLAYBACK ............................................ 54

DIGEST PLAYBACK .......................................................... 55

PLAYBACK OTHER FILE .................................................. 56

Playing Back Still Images ....................................................... 57

Slideshow Playback ........................................................... 59

Connecting to and Viewing on TV .......................................... 59

Connecting via the HDMI Mini Connector .......................... 60

Connecting via the AV Connector ...................................... 61

................................................................ 50

................. 23

Editing

Deleting Unwanted Files ........................................................ 63

Deleting the Currently Displayed File

Deleting Selected Files ...................................................... 63

Protecting Files ...................................................................... 64

Protecting/Releasing Protection of the Currently Displayed

File .................................................................................. 64

Protecting/Releasing Protection of Selected Files .............. 65

Capturing a Still Image in the Video During Playback ............ 66

Combining Videos Recorded by Seamless Recording .......... 67

Capturing a Required Part in the Video (TRIMMING) ............ 68

................................. 63

Copying

Dubbing Files to a Disc by Connecting to a Blu-ray Recorder 69 Copying Files to an SD Card

Copying to Windows PC ........................................................ 71

Verifying System Requirements (Guideline) ....................... 71

Installing the Provided Software (Built-in) ........................... 75

Backing Up All Files ........................................................... 78

Organizing Files ................................................................. 80

Recording Videos to Discs ................................................. 81

Backing Up Files Without Using Provided Software ........... 82

List of Files and Folders ..................................................... 83

Copying to Mac Computer ..................................................... 84

.................................................. 70

Settings Menu

Operating the Menu ............................................................... 85

Operating the Top Menu ....................................................

RECORD SETTING Menu (video) ......................................... 86

RECORD SETTING Menu (still image) .................................. 91

PLAYBACK SETTING Menu (video) ..................................... 93

EDIT Menu (video) ................................................................. 94

PLAYBACK SETTING Menu (still image) .............................. 95

EDIT Menu (still image) ......................................................... 96

SETUP (video/still image) ...................................................... 97

CONNECTION SETTINGS (video/still image) ..................... 100

USB CONNECTION MENU ................................................. 101

Names of Parts ........................................................... 102

Indications on the LCD monitor ............................... 105

Troubleshooting ......................................................... 108

When the unit is not working properly .................................. 108

Charging ..............................................................................

Power supply ....................................................................... 109

Recording ............................................................................ 109

SD Card ............................................................................... 110

Playback .............................................................................. 110

Editing/Copying ................................................................... 111

Computer ............................................................................. 112

Screen/Image ...................................................................... 112

Other Problems ................................................................... 113

Error Message? ................................................................... 114

Maintenance ............................................................... 116

Specifications ............................................................. 117

Trademarks ................................................................. 119

108

Page 3

Verifying the Accessories

If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.

Illustration Description

AC Adapter AC-V11U

Charges this unit. Attach the charging adapter cable to the tip of the cord. It can also be used when recording or playing back videos indoors.

Charging Adapter Cable QAM1580-001

Attach to the tip of the cord of the AC adapter and connect to the USB connector of this unit to charge.

USB Cable (Type A - Micro Type B)

Connects this unit to a computer.

Getting Started

AV Cable E3A-0085-00

Connects this unit to a TV to play back recorded images on the TV.

Please consult your JVC dealer or the nearest JVC service center when purchasing a new AV cable.

Lens Cap

Attach the lens cap when this unit is not used or during transportation.

Core Filter

Basic User Guide

Read well and keep in a safe place where it can be accessed easily when necessary.

Memo :

The provided software (application software) is built into this unit.

“Verifying System Requirements (Guideline)” (A p. 71)

The core filter is for use with an AV cable. Do not use it with any cable other than the AV cable.

“Attaching the Core Filter” (A p. 8)

SD cards are sold separately.

“Types of Usable SD Card” (A p. 9)

When using the AC adapter overseas, please prepare a commercially available converter plug for the country or region of visit.

“Charging the Battery Pack Overseas” (A p. 18)

Page 4

(Rear)

The cover is not properly closed if the red mark at the terminal cover lock is visible.

Getting Started

Turning on this Unit

Open the LCD monitor to turn on this unit. To turn off the power, close the LCD monitor.

To turn on the power

Open the LCD monitor.

To turn off the power

Close the LCD monitor.

The POWER/ACCESS lamp goes off and the power is turned off. “POWER/ACCESS (Power/Access) Lamp” (A p. 103)

Memo :

When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically to conserve power when it is not operated for 5 minutes. (When using the AC adapter, this unit goes into standby mode.)

“ AUTO POWER OFF ” (A p. 98

If “LCD CLOSED RECORDING” is activated, this unit does not turn off even when the LCD monitor is closed during recording.

“LCD CLOSED RECORDING” (A p. 90)

)

Opening the Terminal Cover (SD Card Cover)

To open

Open the LCD monitor.

Slide down the cover lock and slide the cover aside.

Lift the cover slowly.

To close

Leave the LCD monitor open first.

Flip

fits into the opening at the terminals.

Press the entire cover against the camcorder with equal force and firmly

attach the cover completely.

Slide the cover until it clicks into place.

The cover is not properly closed if the red mark on the cover lock is visible.

Caution :

Ensure that the terminal cover and the gray waterproof seal are not damaged and that there are no foreign materials (such as hair, lint, sand or dust) adhered on the cover.

Stop consult your JVC dealer or the nearest JVC service center.

Do not apply excessive force when opening/closing the terminal cover.

Read the “Cautions on Using Underwater” (A p. 6) before using the camera underwater or in places exposed to water droplets.

down the cover slowly while making sure the gray waterproof seal

using the unit underwater if there are damages to the cover, etc. and

Page 5

VOL.

＋

CHARGE POWER/ACCESS

To USB Connector

CHARGE Lamp Charging in progress: Lights upCharging finished: Goes out

AC Adapter

(Provided)

AC Adapter To AC Outlet(AC 100 V to 240 V)

Charging Adapter Cable

(Provided)

Getting Started

Charging

This unit is equipped with a built-in battery. Open the connector cover, and connect the AC adapter for charging as shown in the figure.

Resetting this Unit

When a malfunction occurs on this unit, reset the unit in the following way. (Resetting the unit does not erase the recorded data.)

Open the terminal cover.

Remove the power cord and all connecting cables.

Close the LCD monitor to turn off this unit.

Press the Reset button gently using an object with pointed tip.

Caution :

Press the Reset button just once gently.

not use sharp pointed objects. It may damage the unit or cause electric

Do shock.

Memo :

If malfunction persists even after pressing the Reset button, consult the nearest JVC service center.

Caution :

The built-in battery is not charged at the time of purchase.

the time of purchase or in case of the battery is not used for a long period

At of time, the charging time will be longer than usual. The camera does not turn on if the remaining battery power is low. In this case, charge the battery for more than 40 minutes before turning on the power.

Charging time: Approx. 6 h 10 m (when charging at 25°C (77°F))

The battery cannot be charged outside the room temperature range of 10°C to 35°C (50°F to 95°F). The CHARGE lamp does not light up when the battery is not being charged. If the temperature increases or decreases during charging, the CHARGE lamp will blink slowly and charging will stop. In this case, remove the AC adapter, press the Reset button and wait until the room temperature is within the above stated range before charging again.

You can record or play back videos during charging. (However, the charging time will be longer than usual. In addition, the remaining battery power may decrease according to conditions.) If the internal temperature rises when using the unit, stop the charging temporarily. (The CHARGE lamp goes off.)

If malfunctions (such as overvoltage) occur, charging will stop. In these cases, CHARGE lamp blinks quickly as a notification.

During charging, the P icon on the screen changes to O to indicate that charging is in progress. (when the provided AC adapter is used)

When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center.

Caution :

There are certain specifications for a USB rechargeable device. To charge, use a device with the output voltage of 5 V/1 A or more.

Depending and length of an USB cable used to connect to this unit, the charging time may be longer than usual, or it may not even start.

We shall not be held liable for malfunctions that are due to using nonstandard device or a device with poor quality.

on the specification of your charging device and the thickness

Page 6

Within Duration

of 30 Minutes

Within Water Depth of 5 m

Getting Started

Quad Proof

This unit is equipped with Waterproof, Dust-proof, Drop-proof and Freezeproof features.

Waterproof: Equivalent to IEC

Standard publication

IPX8 and IPX6 (30

529 minutes at depths up to 5 m (16.4 ft))

Drop-proof: This camera clears company testing compliant with MILSTD-810F Method;

516.5 Shock: Dropping onto plywood 3 cm (1-3/16") thick from a height of 1.5 m (4.9 ft)

Caution :

0 0

is no guarantee that there will be no damages when the unit is used

There within the above-mentioned limits. Scratches and dent caused by the impact if the unit is dropped, or other changes in appearance are not included in the warranty.

Malfunction due to mishandling will void the warranty. Before use in water, be sure to read and understand the “Before Using

Underwater or under Low Temperature” (A p. 6) .

Close the terminal cover firmly until it clicks and confirm that the red sign completely goes off.

Make sure that there is no damage to and no foreign material adhered to the packing inside the cover.

Use within a water depth of 5 m (16.4 ft) and a duration of 30 minutes. The waterproof performance cannot be guaranteed if the camcorder is

subject to impact such as dropping. Do not jump or dive into water holding the camcorder. Do not use the camcorder in strong water flows such as in rapids or under

waterfalls. The strong water pressure may impair the waterproof performance.

Do not immerse into hot spring, or hot water above 40°C (104°F).

Dust-proof: Equivalent to IEC Standard publication 529 IP5X

Freeze-proof: Allowable operating temperatures: −10°C to +40°C (14°F to 104°F) Note: Temperatures between −10°C and 0°C (14°F and 32°F) temporarily lower battery performance, reducing the time available

for recording.

Before Using Underwater or under Low Temperature

“Cautions on Using Underwater” (A p. 6) “Maintenance after Use” (A p. 7) “Cautions on Using under Low Temperature” (A p. 7)

Cautions on Using Underwater

Please take note of the followings when using this unit near water or underwater.

Ensure that the cover is closed tightly.

“Opening the Terminal Cover (SD Card Cover)” (A p.

Ensure that the terminal cover and the gray waterproof seal are not damaged and that there are no foreign materials (such as hair, lint, sand or dust) adhered on the cover.

Stop using the unit underwater if there are damages to the cover, etc. and consult your JVC dealer or the nearest service center.

Use within a water depth of 5 m (16.4 ft) and a duration of 30 minutes.

Do not open/close the cover or insert/remove an SD card or any cables while using underwater or on the beach, or if your hands contain water droplets or sands. Doing so may cause water to enter into the camera or malfunction.

not subject the camera to high pressure or vibration resulted from swift

current, waterfall or diving into water.

The waterproof performance is not guaranteed if the camera is dropped or subjected to other impact shock. If the camera has been subjected to impact shock, consult your nearest service center.

While shooting underwater, noise generated inside of the camera (zooming sounds, etc) may be picked up. This is not a malfunction.

Do not immerse into hot spring, or hot water above 40°C (104°F). Doing so deteriorates waterproof performance.

Keep away from hands with sun oil or sun screen. Doing so may cause discoloration or deterioration of material.

This unit sinks underwater. Fasten the grip belt firmly to prevent losing the camera underwater.

The accessories are not waterproof.

Do not use the lens filter or conversion lens underwater or at locations where there is water.

Page 7

Getting Started

Maintenance after Use

After using underwater or in dusty places, rinse the camera with water immediately and dry it completely.

Ensure that the terminal cover is closed.

Rinse with clean water.

the camera in a container filled with enough water to immerse the

Soak camera completely, and rinse it gently.

After using the camera under the sea or on the beach, immerse the camera in fresh water for about 10 minutes to remove salt particles, replace the water and rinse the camera.

Open and close the LCD screen, and operate the buttons or zoom operations to get rid of sands or dusts in the gap.

Dry the camera.

the camera completely with a soft dry cloth and allow it to dry in a

Wipe well-ventilated and shady location.

Place the camera with the lens facing downward while the LCD monitor is closed, and leave it for approximately 10 minutes. (By doing so, microphone and LDC part are dried out easily.) Place the camera in a up right position on a dry cloth afterward Close the terminal cover after the camera is dried out completely.

Wipe off any foreign materials or water droplets inside the cover.

* If you leave the camera immersed in salt water or allow water droplets from

the salt water to remain on the camera, this may cause corrosion, discoloration or deterioration of waterproof performance.

* If you wipe or dry the camera with sand particles adhered, this may cause

scratches on the camera. * Do not wash with chemicals, soap, neutral detergents, or alcohol. * Do not dry the camera with a hair dryer or other heat sources. This could

impair its waterproof performance.

Other Precautions

not leave the camera under low temperature in cold climates or under

Do high temperature above 40 °C (such as under direct sunlight, inside a vehicle in the hot sun, or near a heater). This will cause deterioration of the waterproof performance.

Malfunction due to mishandling will void the warranty.

We are not responsible for any loss of data due to water entering into inside of the camera. Please be forewarned.

It is recommended to replace the waterproof packing once a year to maintain the waterproof performance. Consult your nearest service center. (Subject to a fee)

Cautions on Using under Low Temperature

performance of the battery will drop temporarily when the temperature

The is -10°C to 0°C (14°F to 32°F), this will cause the remaining recording time to shorten.

Charging cannot be performed when the surrounding temperature is below 10°C (50°F).

Turning on the camera while it is still cold will deteriorate the performance of the LCD monitor. Problems such as the screen becoming dark momentarily or residual image can occur.

If snow or water droplets adhere to the camera under sub-zero temperature environment, ice can formed between the gaps around the buttons, speaker or microphone. This will cause difficulty in operating the buttons as well as decrease in the volume level.

Direct contact with exposed metal part under cold temperature can cause the skin to stick on the metal part resulting in injuries such as frostbite. Do not touch with bare hands.

Page 8

Pad

Wind once

To be connected to this unit

3 cm

Release the stopper

Getting Started

Grip Adjustment

Open the pad

Adjust the position of the pad and the length of the belt

Close the pad

Caution :

Be sure to fasten the grip belt properly. If the belt is loose, this unit may drop and result in injuries or damages.

Attaching the Core Filter

Attach a core filter to the AV cable that is connected to this unit. The core filter reduces interference when this unit is connected to other devices.

Page 9

Label

Getting Started

Inserting an SD Card

When a commercially available SD card is inserted, recordings can still be

to the card without stopping when the remaining recording time on the

made built-in memory runs out. “ SEAMLESS RECORDING ” (A p. 88) Depending on the setting of the recording media, recording can be made to the SD card without using the built-in memory. “Types of Usable SD Card” (A p. 9) “Approximate Video Recording Time” (A p. 49)

Open the terminal cover.

Close the LCD monitor to turn off this unit.

Insert an SD card.

Removing the Card

Push the SD card inward once, then pull it out straight.

Types of Usable SD Card

The following SD cards can be used on this unit. Operations

Panasonic

TOSHIBA

SanDisk

are confirmed on the SD cards from the following manufacturers.

SD Card

Warning

Make sure not to insert the SD card in the wrong direction. It may cause damage to the unit and SD card.

Before inserting or removing the SD card, close the LCD monitor and ensure that the POWER/ACCESS lamp goes off.

Do not touch the metal contact area when inserting the SD card.

Memo :

Both videos and still images can be recorded on one SD card. It is recommended

To use a new SD card, or SD card used on other devices, it is necessary to format (initialize) the SD card using “FORMAT SD CARD” from the “SETUP” menu.

“ FORMAT SD CARD ” (A p. 99)

to confirm the video operation of the SD card before usage.

This unit supports 256 MB to 2 GB SD cards.

Use a Class 4 or higher compatible SD card (2 GB) for video recording.

SDHC Card

Use

a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video

recording.

SDXC Card

Use a Class 4 or higher compatible SDXC card (Max. 128 GB) for video recording.

Page 10

0:01:23 0:12:34

Recording Screen Playback Screen

Index screen (thumbnail display)

0:01:23 0:12:34

Getting Started

Memo :

This unit is not guaranteed to operate with all SD cards.

not use a miniSD card or microSD card (even if the card is inserted in

Do an adapter). It may cause malfunction.

To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6 or higher compliant SDHC/SDXC card is recommended.

UHS-I SDHC/SDXC cards can be used in the same manner as standard SDHC/SDXC cards. UHS Speed Class is not supported.

SD card used for recording and edited using this unit can only be played back and edited on this unit.

When your computer cannot recognize the SDXC card

Confirm and update the OS of your computer.

Windows 7 Download and install the updating program (KB976422)

from the following URL. 32 bit version

http://www.microsoft.com/downloads/details.aspx? displaylang=ja&FamilyID=3ee91fc2-a9bc-4ee1aca3-2a9aff5915ea http://www.microsoft.com/downloads/en/details.aspx? FamilyID=3ee91fc2-a9bc-4ee1-aca3-2a9aff5915ea

64 bit version

http://www.microsoft.com/downloads/details.aspx? displaylang=ja&FamilyID=73f766dd-7127-4445b860-47084587155f http://www.microsoft.com/downloads/en/details.aspx? FamilyID=73f766dd-7127-4445-b860-47084587155f

Using the Touch Screen

The LCD monitor of this unit is a touch panel which enables operations by touching the screen with your finger. The operation buttons, thumbnails, and menu items are displayed on the screen according to each mode (recording/playback/setting).

A B Drag the thumbnails on the screen to search for the desired file.

Memo :

0 0 0

“Adjusting the Touch Screen” (A p. 11)

“Shooting under Water” (A p. 33)

are two ways to operate the touch screen, namely “tap” and “drag”.

There The following are some examples.

Tap the button (icon) or thumbnail (file) on the screen to make a selection.

The

touch screen of this unit is pressure-sensitive. When the touch screen

does not respond smoothly, apply slightly more force to your fingertip. Do not press or rub with excessive force. Do not operate the touch screen using an object with a sharp tip. Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is

misaligned with the touched area.

You cannot operate the touch screen under water. Lock the screen to prevent operation errors.

Mac OS X

10.4 Tiger / Mac OS X

10.5 Leopard

Mac OS X

10.6 Snow Leopard

Not compatible.

Update the OS version to 10.6.5 or later.

Locking the Screen (when Shooting Underwater)

Lock the screen before using this unit underwater to prevent operation errors on the touch screen due to water pressure.

Once the screen is locked, operations on the touch screen except L are disabled.

The START/STOP (recording) button and the zoom lever can be used while the screen is locked.

You can set for both video and still image modes.

If “SCREEN LOCK” has been set, it will take a longer time for the unit to power off after closing the LCD monitor.

Setting the “SCREEN LOCK”

Check that the unit is in the recording mode.

Tap “MENU”.

Tap “RECORD SETTING”.

Tap “SCREEN LOCK”.

The L button appears on the screen.

To cancel “SCREEN LOCK”

Tap the L

button.

Memo :

“SCREEN LOCK” is set, only the L button on the touch screen can

Once be operated.

“SCREEN LOCK” cannot be set for the following cases:

- during recording

- when “TIME-LAPSE RECORDING” or “DATE/TIME RECORDING” has been set

Page 11

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

TOUCH SCREEN ADJUST

SETUP

1/3

PRESS THE + MARK

1/3

PRESS + MARK AGAIN

CONFIRM THE ADJUSTMENT

COMPLETED

Getting Started

Adjusting the Touch Screen

Adjust the response position when the touch screen is touched.

Tap “MENU”.

Tap “SETUP”.

Tap “TOUCH SCREEN ADJUST”.

Tap “OK”.

Setting ends and returns to the menu screen.

Caution :

Do not tap areas other than the “+” mark during touch screen adjustment (steps 4 - 5). Doing so may cause the touch screen to malfunction.

Memo :

Adjust by lightly tapping with a corner of an SD card, etc.

Do not press with an object with a sharp tip or do not press hard.

The touch screen adjustment screen appears.

Tap “+”. (3 times in total)

Keep tapping “+” as its position changes with every tap.

If areas other than the “+” mark are tapped, errors will occur. Make sure to tap the “+” mark.

Tap “+” again to confirm the adjusted positions. (3 times in total)

Keep tapping “+” as its position changes with every tap.

Page 12

REC

≪PLAY

00:01:23 00:12:34

Getting Started

Names of Buttons and Functions on the LCD Monitor

The following screens are displayed during A modes.

video and B still image

Recording Screen (Video/Still Image)

A/B (Video/Still Image) Mode Button

Switches between A video and B still image modes.

Zoom Button

“Zooming” (A p. 26)

Still Image Recording Button

Records still images during video recording.

“Capturing Still Images During Video Recording” (A p. 23

Playback Mode Button

Switches to the playback mode.

Recording Start/Stop Button

6: Video Recording Start Button

7: Video Recording Stop Button

Menu Button

“Operating the Menu” (A p. 85)

Display Button

Switches the display between full (m) and simple (n) with every tap of the button.

Simple display: Some displays disappear automatically when the screen is not operated.

Full display: Displays everything. The display button changes from n to m.

When the power is turned off, the display setting will revert to simple display (n).

Recording Mode Button

Switches the recording mode (P Intelligent Auto/H Manual).

)

Playback Screen (Video)

When this unit is not operated for a certain period of time, the operation buttons on the LCD monitor disappear automatically. Tap on the screen to display the operation buttons again.

A/B (Video/Still Image) Mode Button

Switches between A video and B still image modes.

Video Scene Capture Button

Displayed when playback is paused.

Saves one scene of the video being played back as a still image.

Recording Mode Button

Switches to the recording mode.

Index Screen (Thumbnail Display) Button

Returns to the index screen (thumbnail display).

“Operation Buttons for Video Playback” (A p. 51

Delete Button

“Deleting the Currently Displayed File” (A p. 63)

Playback Zoom Button

Enlarges the video image that is played back.

“During Video Playback” (A p. 51)

Menu Button

“Operating the Menu” (A p. 85)

Operation Buttons

“Operation Buttons for Video Playback” (A p. 51)

Display Button

Switches the display between full (m) and simple (n) with every tap of the button.

Simple display: Some displays disappear automatically when the screen is not operated.

Full display: Displays everything. The display button changes from n to m.

When the power is turned off, the display setting will revert to simple display (n).

)

Page 13

≪REC

3 4 5 6

Getting Started

Playback Screen (Still Image)

When this unit is not operated for a certain period of time, the operation buttons on the LCD monitor disappear automatically. Tap on the screen to display the operation buttons again.

A/B (Video/Still Image) Mode Button

Switches between A video and B still image modes.

Recording Mode Button

Switches to the recording mode.

Index Screen (Thumbnail Display) Button

Returns to the index screen (thumbnail display).

“Operation Buttons for Still Image Playback” (A p. 58

Delete Button

“Deleting the Currently Displayed File” (A p. 63)

Playback Zoom Button

Enlarges the still image that is being played back.

“Playing Back Still Images” (A p. 58)

Menu Button

“Operating the Menu” (A p. 85)

Operation Buttons

“Operation Buttons for Still Image Playback” (A p. 58)

Display Button

Switches the display between full (m) and simple (n) with every tap of the button.

Simple display: Some displays disappear automatically when the screen is not operated.

Full display: Displays everything. The display button changes from n to m.

When the power is turned off, the display setting will revert to simple display (n).

)

Index Screen (Thumbnail Display) Display

A/B (Video/Still Image) Mode Button

Switches between A video and B still image modes.

Page Forward/Back Button

“Operation Buttons for Video Playback” (A p. 51 “Operation Buttons for Still Image Playback” (A p. 58)

Recording Mode Button

Switches to the recording mode.

Delete Button

“Deleting Selected Files” (A p. 63) “Deleting the Currently Displayed File” (A p. 63)

Playback Media Button

Switches between SD card and built-in memory.

Menu Button

“Operating the Menu” (A p. 85)

Date Button

“Operation Buttons for Video Playback” (A p. 51) “Operation Buttons for Still Image Playback” (A p. 58)

)

Page 14

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

34 5

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

Getting Started

Menu screen (recording mode)

SILENT Button

“Using the Silent Mode” (A p. 22)

INFO. Button

“Checking the Remaining Recording Time” (A p. 48

RECORD SETTING Menu

“RECORD SETTING Menu (video)” (A p. 86) “RECORD SETTING Menu (still image)” (A p. 91)

CONNECTION SETTINGS Menu

“CONNECTION SETTINGS (video/still image)” (A p. 100)

SETUP Menu

“SETUP (video/still image)” (A p. 97)

Close Button

Exit the menu.

Menu screen (playback mode)

SILENT Button

“Using the Silent Mode” (A p. 22)

INFO. Button (Displayed only after playback)

)

“Checking the Recording Date and Other Information” (A p. 53

PLAYBACK SETTING Menu

“PLAYBACK SETTING Menu (video)” (A p. 93) “PLAYBACK SETTING Menu (still image)” (A p. 95)

SETUP Menu

“SETUP (video/still image)” (A p. 97)

CONNECTION SETTINGS Menu

“CONNECTION SETTINGS (video/still image)” (A p. 100)

EDIT Menu

“EDIT Menu (video)” (A p. 94) “EDIT Menu (still image)” (A p. 96)

Close Button

Exit the menu.

)

Page 15

SET DATE/TIME!

201712 10 00

TIME

DATE

SAVE

DATE & TIME SETTING

GMT

SAVE

DATE & TIME/AREA

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

SETUP

DATE & TIME

DATE & TIME SETTING

DATE & TIME

201712 10 00

TIME

DATE

DATE & TIME SETTING

SET

Getting Started

Clock Setting

“SET DATE/TIME!” is displayed when you turn on the unit for the first time or when the unit has not been used for a prolonged period. Set the clock before recording.

Open the LCD monitor.

The unit turns on.

When the LCD monitor is closed, the unit turns off.

Tap “OK” when “SET DATE/TIME!” is displayed.

Set the date and time.

Resetting the Clock

Set the clock with “DATE & TIME” from the menu.

Tap “MENU”.

Tap “SETUP”.

Tap “DATE & TIME”.

When the day, month, year, hour, or minute item is tapped, “3” and “2” will be displayed.

Tap 3 or 2 to adjust the year, month, day, hour, and minute.

After setting the date and time, tap “SAVE”.

Select the region where you live and tap “SAVE”.

Time difference between the selected city and the GMT (Greenwich Mean Time) is displayed.

Tap 0 or 1 to select the city name.

Memo :

The clock can be reset again later.

“Resetting the Clock” (A p. 15)

When

using this unit overseas, you can set it to the local time for recording.

“Setting the Clock to Local Time when Traveling” (A p. 18)

The clock is reset about one month after the battery is depleted. “SET DATE/TIME!” is displayed the next time you turn on this unit. Set the clock again after charging the battery.

Tap 3 or 2 to scroll the screen.

Tap “CLOCK SETTING”.

Set the date and time.

When the day, month, year, hour, or minute item is tapped, “3” and “2” will be displayed.

Tap 3 or 2 to adjust the year, month, day, hour, and minute.

After setting the date and time, tap “SET”.

Page 16

GMT

SAVE

DATE & TIME/AREA

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

SETUP

LANGUAGE

ENGLISH

Getting Started

Select the region where you live and tap “SAVE”.

Time difference between the selected city and the GMT (Greenwich Mean Time) is displayed.

Tap 0 or 1 to select the city name.

Changing the Display Language

The language on the display can be changed.

Tap “MENU”.

Tap “SETUP”.

Tap “LANGUAGE”.

Tap 3 or 2 to scroll the screen.

Tap to the desired language.

Tap 3 or 2 to scroll the screen.

Page 17

Getting Started

Holding this Unit

When holding this unit, keep your elbows close to your sides to prevent camera shake.

Hold

the LCD monitor with your left hand and adjust the angle accordingly. Holding the LCD monitor with your left hand helps to stabilize the camera for recording.

Caution :

The photographer should pay attention to the surroundings during shooting, another person or vehicle.

Be careful not to drop this unit during transportation.

Guardians should pay close attention when this unit is used by children.

making sure that he/she is in no danger of falling or collision with

Tripod Mounting

This unit can be mounted on a tripod (or monopod). This is useful for preventing camera shake and recording from the fixed position.

prevent this unit from falling off, check the tripod mounting screw holes and positioning holes on the unit carefully before mounting, and turn the screws until they are fastened firmly.

Caution :

To prevent injuries or damages which may result if this unit falls off, read the instruction manual of the tripod (or monopod) to be used and make sure that it is securely attached.

In strong wind conditions and when placed at an unstable location, there is a risk of the tripod toppling and falling.

Please check beforehand if the use of a tripod is allowed as it may be prohibited depending on the shooting location.

Memo :

It is recommended to use a tripod or monopod when recording in conditions to the telephoto end).

Set the image stabilizer to b (OFF) when using a tripod for recording.

“Reducing Camera Shake” (A p. 40)

prone to camera shake (such as in dark places or when zoomed

Page 18

ABBFCO

Morocco

Mozambique

Republic of South Africa

Tanzania

Zambia

Kenya

Guinea

Egypt

Algeria

Africa

Jordan

Kuwait

Iran

Israel

Middle East

Peru

Venezuela

Brazil

Puerto Rico

Bahamas

Panama

Haiti

Chile

Jamaica

Colombia

Argentina

Latin

Fiji

New Zealand

Ton g a

Tahiti

Guam

Australia

Oceania

Romania

Portugal

Poland

Belgium

France

Finland

Hungary

Norway

Germany

Denmark

Spain

Sweden

Switzerland

Greece

Canary Islands

Netherlands

Austria

Italy

United Kingdom

Ireland

Iceland

Europe

Asia

Mexico

Japan

United States

North America

Canada

Malaysia

Macau Special

Administrative Region

Hong Kong Special

Administrative Region

Vietnam

Philippines

Bangladesh

Pakistan

Nepal

China

South Korea

Thailand

Sri Lanka

Singapore

Indonesia

India

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

SETUP

DATE & TIME

AREA SETTING

DATE & TIME

GMT

SAVE

AREA SETTING

Getting Started

Using this Unit Overseas

The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet. “Charging the Battery Pack Overseas” (A p. 18) Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “DATE & TIME”. “Setting the Clock to Local Time when Traveling” (A p. 18)

“ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set

When 1 hour ahead. “Setting Daylight Saving Time” (A p. 19)

Charging the Battery Pack Overseas

The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet.

Setting the Clock to Local Time when Traveling

Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “DATE & TIME”. Restore the region settings after you returned from the trip.

Tap “MENU”.

Tap “SETUP”.

Tap “DATE & TIME”.

Tap 3 or 2 to scroll the screen.

Tap “AREA SETTING”.

Select the area you are traveling to and tap “SAVE”.

Time difference between the selected city and the GMT (Greenwich Mean Time) is displayed.

Tap 0 or 1 to select the city name.

Memo :

Setting

“AREA SETTING” changes the clock time such that time difference is accounted for. After returning to your country, re-select the region that was set initially to restore the original clock settings.

Page 19

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

SETUP

DATE & TIME

DST SETTING

DATE & TIME

OFFON

CURRENT SETTING: OFF

DAYLIGHT SAVING TIME (DST)

DST SETTING

Getting Started

Setting Daylight Saving Time

When “ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set 1 hour ahead.

Tap “MENU”.

Tap “SETUP”.

Tap “DATE & TIME”.

Optional Accessories

Product Name Description

HDMI Mini Cable

VX-HD310

VX-HD315

Memo :

The optional accessories above may not be supported in some regions.

For more information, refer to the catalog.

For details on the provided accessories, refer to “Verifying the Accessories”.

“Verifying the Accessories” (A p. 3

Allows viewing in high picture quality when connected to a TV.

Transmits video, audio, and control signals between devices.

)

Tap 3 or 2 to scroll the screen.

Tap “DST SETTING”.

Tap “ON”.

Memo :

What is daylight saving time? Daylight saving time is the system of setting the clock 1 hour ahead for a fixed period in summer. It is used mainly in the Western countries.

Restore the daylight saving time settings after you returned from the trip.

Page 20

≪PLAY

intelligent AUTO

MANUAL

0:00:00 [2:04]

10:10

REC

≪PLAY

Recording

Taking Videos in Auto Mode

Intelligent Auto recording, the camera automatically adjusts the settings

With such as brightness and focus to suit the shooting conditions.

In case of specific shooting scenes such as person etc., its icon is displayed on the screen.

Before recording an important scene, it is recommended to conduct a trial recording.

Open the LCD monitor.

Check if the recording mode is A.

If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video.

Check if the recording mode is P Intelligent Auto.

Indications for Video Recording

Display Icon Description

Video Quality Displays the icon of the “VIDEO QUALITY”

TOUCH PRIORITY AE/AF

Time Displays the current time.

RECORDING EFFECT

setting selected in the recording menu. “ VIDEO QUALITY ” (A p. 88)

Displays the setting of “TOUCH PRIORITY AE/ AF”. By default, it is set to “FACE TRACKING”. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 39)

“Clock Setting” (A p. 15)

Displays the corresponding icon when a recording effect is specified.

C: GRAINY MONOCHROME D: FOOD B: BABY

“Recording with Effects (RECORDING EFFECT)” (A p. 35)

If the mode is H Manual, tap H on the recording screen to display the mode switching screen. Tap P to switch the recording mode to Intelligent Auto.

Press the START/STOP button to start recording.

Press again to stop.

Some displays disappear after approximately 3 seconds. Use the n button to change the displays.

Image Stabilizer Displays the image stabilizer setting.

“Reducing Camera Shake” (A p. 40

Recording Media Displays the icon of the media where videos

are recorded to. The recording media can be changed. “ REC MEDIA FOR VIDEO ” (A p. 98)

Battery Indicator Displays the approximate remaining battery

power during use. “Checking the Remaining Recording Time” (A p. 48

Recording Mode Displays the current recording mode of P

)

(Intelligent Auto) or H (Manual). Current shooting mode is displayed.

Setting Scenes of Intelligent Auto

Displays scenes detected automatically in the Intelligent Auto function. Multiple scenes may be detected.

Remaining Recording Time

Displays the remaining time for video recording. “Checking the Remaining Recording Time”

)

Scene Counter (Recorded Time)

(A p. 48

Displays the elapsed time of the video that is currently being recorded.

)

Page 21

Scenes of Intelligent Auto

Display Icon Description

Recording

Operation Buttons for Video Recording

Captures one’s skin beautifully.

Allows people to be captured naturally.

Record a group of people with the most suitable settings.

Records while focusing on a near object.

Focuses at a far distance and captures a sharp image with vivid colors.

Records in dark places with minimal noise in the overall image.

Allows night scenes to be captured accurately with minimal noise in the overall image.

Prevents colors from fading even when recording in a bright environment, such as snowfield and beaches.

Prevents colors from fading when recording a subject in a spotlight.

Reproduces the green color of trees vividly.

Reproduces the colors of sunset naturally.

Adjusts settings so that the subject does not appear too dark due to backlight.

Records while emphasizing the brightness of the colors.

Reproduces the natural colors of the outdoors during the day.

Reproduces the natural colors of the indoors in a cold-color illumination.

Operation

Buttons

Video/Still Image Mode A/B

WT Zoom Allows the same functions as the zoom

Still Image Recording A

Playback Mode Switches to the playback mode.

E/ F Recording Start

Record-Standby

MENU Displays the various menus of video

Description

Switches between video and still image modes.

lever to be performed. Camera shake that often occurs when using the zoom lever can be minimized. “Zooming” (A p. 26)

Tap this button to record a still image during video recording. “Capturing Still Images During Video Recording” (A p. 23

Functions as the START/STOP button.

recording. “Operating the Menu” (A p. 85)

)

Reproduces the natural colors of the indoors in a warm-color illumination.

Selects the most suitable settings for handheld shooting.

Selects the most suitable settings when a tripod is used for shooting.

Memo :

Scenes can be detected according to the shooting conditions and automatically adjusted in Intelligent Auto mode.

Multiple

scenes may be detected depending on the recording conditions.

Some functions may not work properly depending on the shooting conditions.

Display Button n Switches the display between full (m)

Recording Mode P/H

simple (n) with every tap of the button.

Simple display: Some displays disappear automatically when the screen is not operated.

Full display: Displays everything. The display button changes from n to m.

When the power is turned off, the display setting will revert to simple display (n).

Switches between the P and H Manual recording mode.

and

Intelligent Auto

Page 22

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

OFF

SILENT MODE

Recording

Using the Silent Mode

When the Silent mode is used, the LCD monitor darkens and operation

will not be output. Use this mode to record quietly in dark places such

sounds as during a performance.

T appears when “SILENT MODE” is set to “ON”.

To mute only the operating sound, set “OPERATION SOUND” in the menu to “OFF” instead of using the silent mode.

“ OPERATION SOUND ” (A p. 98)

Operating procedure

Tap “MENU”.

The top menu appears.

Tap T.

Tap “ON”.

Useful Settings for Recording

When “DATE/TIME RECORDING” is used, the date and time can be recorded together with the video.

“Recording Videos with Date and Time” (A p. 46)

Caution :

Do not expose the lens to direct sunlight.

While this unit can be used with the LCD monitor reversed or the LCD monitor closed with “LCD CLOSED RECORDING” activated, the temperature of this unit rises more easily. Leave the LCD monitor open

using this unit for long periods of time, or in places exposed to direct

when sunlight or high temperatures.

The power may turn off to protect the circuit if the temperature of this unit rises too much.

If the temperature of this unit rises during recording, 7 changes color to yellow as a notification.

This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, close the monitor screen to turn off the power and remove the AC adapter, then press the Reset button to reset this unit.

“Resetting this Unit” (A p. 5)

Disclaimer

- We shall not be held responsible for loss of recorded contents when recording videos/audio or playback cannot be operated due to malfunctions in this unit, provided parts, or SD card.

- Once deleted, recorded contents (data), including data loss due to malfunctions in this unit, cannot be restored. Please be forewarned.

- JVC will not be responsible for any lost data.

Memo :

Check that the remaining recording time in the media is sufficient before you start recording. “Checking the Remaining Recording Time” (A p. 48) If the remaining recording time is not sufficient, save the files on a PC or disc before deleting the files from the unit. “Deleting Unwanted Files” (A p. 63)

When there are many files in the media, it may take time for them to be displayed on the playback screen. Wait for a while as the POWER/ ACCESS lamp blinks, indicating normal operation.

Recording stops automatically as it cannot be performed for 12 or more consecutive hours according to specifications. (It may take some time to resume recording.)

Up to 4GB per video file can be recorded. File recorded using long recordings that exceeds 4GB is split and recorded into several video files.

Depending on the shooting conditions, the four corners of the screen may appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.

Page 23

REC

≪PLAY

intelligent AUTO

MANUAL

Lights up in green when in focus

Recording

Capturing Still Images During Video Recording

Still images can be captured by tapping the A (standby or recording).

“PHOTO” lights up on the screen when a still image is being captured.

The still images captured during video recording are saved to the destination set in “REC MEDIA FOR IMAGE”.

button while in the video mode

Memo :

The size of the still image that is captured in the video mode is 1,920 x 1,080.

Operation is invalid under the following conditions:

- when menu is being displayed

- when remaining recording time or battery power is being displayed

- when the “TIME-LAPSE RECORDING”, “RECORDING EFFECT” or “DATE/TIME RECORDING” function is set

- when the special AV cable is connected to the AV connector

- when the HDMI cable is connected and a resolution other than 1080i is output

Taking Still Images in Auto Mode

You can record without worrying about the setting details by using the P Intelligent Auto mode.

Open the LCD monitor.

Check if the recording mode is B.

If the mode is A mode switching screen. Tap B to switch the mode to still image.

Check if the recording mode is P Intelligent Auto.

video, tap A on the recording screen to display the

If the mode is H Manual, tap H on the recording screen to display the mode switching screen. Tap P to switch the recording mode to Intelligent Auto.

Press the START/STOP button.

PHOTO lights up when a still image is being captured.

Memo :

Depending performed properly even in the Intelligent Auto mode.

Start recording after adjusting the focus

on the subject and shooting conditions, recording may not be

Press and hold the A button on the touch screen until the focus is adjusted.

Remove your finger from the button to release the shutter.

Available only when “SHUTTER MODE” is set to “RECORD ONE SHOT”.

Page 24

[6630]

10:10

≪PLAY

Recording

Indications During Still Image Recording

Scenes of Intelligent Auto

Display Icon Description

Some displays disappear after approximately 3 seconds. Use the n

button to change the displays.

Display Icon Description

Image Size Displays the icon of the image size.

The size of still images can be changed.

“ IMAGE SIZE ” (A p. 92)

TOUCH PRIORITY AE/AF

Time Displays the current time.

RECORDING EFFECT

Recording media Displays the icon of the media where still

Battery Indicator Displays the approximate remaining battery

Recording Mode Displays the current recording mode of P

Setting Scenes of Intelligent Auto

Remaining Number of Shots

Displays the setting of “TOUCH PRIORITY AE/ AF”. By default, it is set to “FACE TRACKING”. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 39)

“Clock Setting” (A p. 15

Displays the corresponding icon when a recording effect is specified.

C: GRAINY MONOCHROME D: FOOD B: BABY

“Recording with Effects (RECORDING EFFECT)” (A p. 35)

images are recorded to. The recording media can be changed. “ REC MEDIA FOR IMAGE ” (A p. 99)

power during use. “Checking the Remaining Recording Time” (A p. 48)

(Intelligent Auto) or H (Manual).

Displays scenes detected automatically in the Intelligent Auto function. Multiple scenes may be detected.

Displays the remaining number of shots for still image recording. “Approximate Number of Still Images (Unit: Number of Shots)” (A p. 49)

)

Captures one’s skin beautifully.

Allows people to be captured naturally.

Record a group of people with the most suitable settings.

Records while focusing on a near object.

Focuses at a far distance and captures a sharp image with vivid colors.

Records in dark places with minimal noise in the overall image.

Allows night scenes to be captured accurately with minimal noise in the overall image.

Prevents colors from fading even when recording in a bright environment, such as snowfield and beaches.

Prevents colors from fading when recording a subject in a spotlight.

Reproduces the green color of trees vividly.

Reproduces the colors of sunset naturally.

Adjusts settings so that the subject does not appear too dark due to backlight.

Records while emphasizing the brightness of the colors.

Reproduces the natural colors of the outdoors during the day.

Reproduces the natural colors of the indoors in a cold-color illumination.

Reproduces the natural colors of the indoors in a warm-color illumination.

Selects the most suitable settings for handheld shooting.

Selects the most suitable settings when a tripod is used for shooting.

Memo :

Scenes can be detected according to the shooting conditions and automatically adjusted in Intelligent Auto mode.

Multiple

scenes may be detected depending on the recording conditions.

Some functions may not work properly depending on the shooting conditions.

Recording in Progress

Focus Lights up in green when focused.

“PHOTO” appears when a still image is being captured.

Page 25

[6630]

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

OFF

SILENT MODE

Recording

Operation Buttons for Still Image Recording

Operation

Buttons

Video/Still Image Mode A/B

WT Zoom Allows the same functions as the zoom

Still Image Recording A

Switches between video and still image modes.

lever to be performed. Camera shake that often occurs when using the zoom lever can be minimized. “Zooming” (A p. 26)

Allows you to take still images using the touch panel. Pressing and holding the button shooting. “Start recording after adjusting the focus” (A p. 23)

Description

allows you to adjust the focus before

Using the Silent Mode

When the Silent mode is used, the LCD monitor darkens and operation

will not be output. Use this mode to record quietly in dark places such

sounds as during a performance.

T appears when “SILENT MODE” is set to “ON”.

To mute only the operating sound, set “OPERATION SOUND” in the menu to “OFF” instead of using the silent mode.

“ OPERATION SOUND ” (A p. 98)

Operating procedure

Tap “MENU”.

The top menu appears.

Tap T.

Tap “ON”.

Playback Mode Switches to the playback mode.

MENU Displays the various menus of still image

Display Button n Switches the display between full (m)

Recording Mode P/H

recording. “Operating the Menu” (A p. 85)

simple (n) with every tap of the button.

Simple display: Some displays disappear automatically when the screen is not operated.

Full display: Displays everything. The display button changes from n to m.

When the power is turned off, simple display (n) will be set.

Switches between the P and H Manual recording mode.

and

Intelligent Auto

Caution :

Do not expose the lens to direct sunlight.

While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Leave the LCD monitor open when using this unit for long periods of time, or in places exposed to direct sunlight or high temperatures.

power may turn off to protect the circuit if the temperature of this unit

The rises too much.

Do not remove the AC adapter or SD card when the POWER/ACCESS lamp is lighted. The recorded data may become unreadable.

“Resetting this Unit” (A p. 5)

Memo :

Before recording an important scene, it is recommended to conduct a trial recording.

Depending on the shooting conditions, the four corners of the screen may appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.

Page 26

VOL.

＋

T (Telephoto End)

W (Wide Angle End)

≪PLAY

REC

Zoom Button (T/W)

VOL.

＋

≪PLAY

REC

≪PLAY

REC

Recording

Zooming

The angle of view can be adjusted using zoom.

Use the W end (wide angle end) to shoot a wider field of view.

Use the T end (telephoto end) to magnify the subject for shooting.

The following zoom options are available:

- Optical Zoom (1 - 40x)

- Digital Zoom (41 - 200x)

You can also use the zoom (WT) button on the touch screen to zoom.

Tap

the WT button, then press and hold the T (telephoto end) or W (wide

angle end) button.

Zoom Memory

The zoom position can be stored by the Zoom Memory icon (WT) on the touch screen.

Storing Method

Zoom to the position to reach to the desired position for storing.

Tap “WT”.

Press and hold “M” (approx. 1 second).

Memo :

When digital zoom is used, the image becomes grainy as it is digitally enlarged.

The zoom ratio range can be changed.

“ ZOOM ” (A p. 88)

Store the zoom position.

Operating Detail

Tap “WT”.

Tap “M”.

Zoom to the point that is stored in advance.

Memo :

If the setting of DIS, VIDEO QUALITY or ZOOM is changed, the zoom position stored will be erased.

Page 27

Manual Recording

≪PLAY

intelligent AUTO

MANUAL

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

In situations where you are unable to recording properly using Intelligent Auto recording, you can change the settings and record using manual recording.

Open the LCD monitor.

Set the recording mode to either A video or B still image.

switch the mode between video and still image, tap A or B on the

To recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively.

Select the Manual recording mode.

Tap the item to set manually.

For

details on the various manual settings, refer to “Manual Recording

Menu”.

Manual Recording Menu

The following items can be set.

Name Description

FOCUS

“Adjusting Focus Manually (FOCUS)” (A p. 28)

BRIGHTNESS ADJUST

“Adjusting Brightness” (A p. 29)

Recording

Use manual focus if the subject is not focused automatically.

Overall brightness on the screen can be adjusted.

Use this when recording in a dark or bright location.

If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

BACKLIGHT COMP.

WHITE BALANCE

TELE MACRO

Corrects the image when the subject appears dark due to backlight.

Use this when shooting against the light.

“Setting Backlight Compensation” (A p. 30)

0 0

color on the screen can be adjusted.

Overall Use this when the color on the screen

appears differently from the actual color.

“Setting White Balance” (A p. 31)

this to take close-up (macro) shots of the

Use subject.

“Taking Close-up Shots (TELE MACRO)” (A p. 32)

Page 28

≪PLAY

intelligent AUTO

MANUAL

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

MANUAL

AUTO

FOCUS

≪PLAY

REC

SET

REC

≪PLAY

Recording

Adjusting Focus Manually (FOCUS)

Adjust the focus manually when you are unable to focus clearly using Intelligent Auto or when you want to lock the focus.

Select the Manual recording mode.

If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.

Tap “MENU”.

Tap “MANUAL”.

Adjust the focus.

Tap E to focus on a distant subject. If E appears blinking, focus cannot be set any further.

Tap p to focus on a near subject. If p appears blinking, focus cannot be set any nearer.

Tap “SET” to confirm.

The top menu appears.

Tap “RECORD SETTING”.

Tap “FOCUS”.

Tap L to exit the menu.

Tap J to return to the previous screen.

When

focus is confirmed, the focusing frame disappears and E and

p are displayed.

Page 29

≪PLAY

intelligent AUTO

MANUAL

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

MANUAL

AUTO

BRIGHTNESS ADJUST

≪PLAY

REC

SET

≪PLAY

REC

Recording

Adjusting Brightness

You can adjust the brightness to your preferred level.

Select the Manual recording mode.

If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.

Tap “MENU”.

Tap “MANUAL”.

Adjust the brightness value.

Compensation range: -2.0 to +2.0

Tap 3 to increase the brightness.

Tap 2 to decrease the brightness.

Tap “SET” to confirm.

The top menu appears.

Tap “RECORD SETTING”.

Tap “BRIGHTNESS ADJUST”.

Tap L to exit the menu.

Tap J to return to the previous screen.

Memo :

Settings can be adjusted separately for videos and still images.

Page 30

≪PLAY

intelligent AUTO

MANUAL

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

OFF

BACKLIGHT COMP.

ADVANCE

Recording

Setting Backlight Compensation

You can correct the image when the subject appears too dark due to backlight.

Select the Manual recording mode.

If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.

Tap “MENU”.

Tap “ON” or “ADVANCE”.

“ADVANCE” is designed to perform more effective backlight compensation. Choose this when the backlight compensation is not adjusted appropriately by “ON”.

After setting, the l icon (Advance: Q) appears.

Setting Details

OFF Backlight compensation is disabled.

ON Backlight compensation is enabled.

ADVANCE Should be selected for a better backlight

compensation effect.

The top menu appears.

Tap “RECORD SETTING”.

Tap “BACKLIGHT COMP.”.

Tap L to exit the menu.

Tap J to return to the previous screen.

Page 31

≪PLAY

intelligent AUTO

MANUAL

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

AUTO

SET

Recording

Setting White Balance

You can set the color tone to suit the light source.

Select the Manual recording mode.

If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.

Tap “MENU”.

Select the white balance setting.

You

can either tap the icon, or select the item using the “0” “1” button

and tap “SET”.

The White Balance icon appears on the screen upon completing the setting.

Setting Details

AUTO Adjusts automatically to the natural colors.

MWB Use this when the problem of unnatural colors is

not resolved.

FINE Set this when shooting outdoors on a sunny day.

CLOUD Set this when shooting on a cloudy day or inside a

shade.

o HALOGEN Set this when shooting under illumination such as

a video light.

The top menu appears.

Tap “RECORD SETTING”.

Tap “WHITE BALANCE”.

q MARINE:BLUE Set this when shooting in deep waters (water

appears blue).

MARINE:GREEN

Set this when shooting in shallow waters (water appears green).

Using MWB

Point the cursor to “MWB” using the “0” “1” button.

Hold a sheet of plain white paper in front of the lens so that the white paper fills the screen, tap and hold the “SET” button.

o blinks, release your finger after the setting screen disappears.

You can also tap and hold the “MWB” icon to perform the setting.

Memo :

The setting will not change if “MWB” is being tapped too fast (less than 1 second).

0 0

Tap L to exit the menu. Tap J to return to the previous screen.

Page 32

≪PLAY

intelligent AUTO

MANUAL

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

OFF

TELE MACRO

Recording

Taking Close-up Shots (TELE MACRO)

You can take close-up shots of an object using the tele macro function even when the unit is at the telephoto zoom setting.

*The image is only an impression.

Select the Manual recording mode.

If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.

Tap “TELE MACRO”.

Tap L to exit the menu.

Tap J to return to the previous screen.

Tap “ON”.

After setting, the tele macro icon o

Setting Details

appears.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

OFF Enables close-up shots up to 1 m at the telephoto (T) end.

Enables close-up shots up to 5 cm at the wide angle (W) end.

ON Enables close-up shots up to 60 cm at the telephoto (T) end.

Enables close-up shots up to 5 cm at the wide angle (W) end.

Caution :

When you are not taking close-up shots, set “TELE MACRO” to “OFF”. Otherwise, the image may be blur.

Page 33

Shooting under Water

≪PLAY

intelligent AUTO

MANUAL

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

AUTO

SET

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

Perform the following settings to shoot underwater.

Setting the White Balance to Underwater Mode

Corrects the color when shooting underwater to record more natural images.

from the following two settings depending on the color of the water at

Select the shooting location.

Select the Manual recording mode.

Tap q or r.

Setting Details

Recording

If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.

Tap “MENU”.

q MARINE:BLUE Set this when shooting in deep waters (water

appears blue).

MARINE:GREEN

Set this when shooting in shallow waters (water appears green).

Memo :

You may not necessarily achieve the correction effect as expected.

It is recommended to conduct a trial recording in advance.

Locking the Screen

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

The top menu appears.

Tap “RECORD SETTING”.

Tap “WHITE BALANCE”.

Tap 1 to change the items displayed.

Page 34

0:00:00 [2:04]

Recording

Tap “SCREEN LOCK”.

The L button appears.

Memo :

If “SCREEN LOCK” has been set, it will take a longer time for the unit to

off after closing the LCD monitor. If you open the LCD monitor after

power closing it, and the power is still turned on, you can continue to record.

If “LCD CLOSED RECORDING” (A p. 90) is set to “ON”, this unit does not turn off even when the LCD monitor is closed.

To cancel “SCREEN LOCK”

Tap the L button.

Memo :

“SCREEN LOCK” is set, only the L button on the touch screen can

Once be operated.

The START/STOP (recording) button and the zoom lever can be used while the screen is locked.

“SCREEN LOCK” cannot be set for the following cases:

- during recording

- when “TIME-LAPSE RECORDING” or “DATE/TIME RECORDING” has been set

Caution :

Before using the camera underwater, read “Before Using Underwater or under Low Temperature” (A p. 6) carefully. Improper usage resulting in water submersion will damage the device and cause injury.

that the terminal cover is closed tightly before using underwater or

Ensure on the beach. “Opening the Terminal Cover (SD Card Cover)” (A p. 4)

Page 35

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

Recording

Recording with Effects (RECORDING EFFECT)

You can add and record various effects to videos or still images.

setting is done, you can easily record images that are suitable for each

Once image.

Type of Effect Description of Effect

GRAINY MONOCHROME

FOOD

BABY

Caution :

Depending the shooting effect as intended.

on the shooting environment and subject, you may not achieve

Captures film-like monochrome images by increasing emphasizing the rough grainy feel on the image. “Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)” (A p. 35)

Captures food images such that the food looks appetizing even under fluorescent lighting in homes deepening the colors. “Recording Food Images (FOOD)” (A p. 36)

Captures a soft and gentle image by lightening the skin tone while retaining the reddish hue, enhancing the skin beautifying effect as well as smoothing the appearance of the skin. “Recording Images of a Baby (BABY)” (A p. 37)

the contrast of mid-level brightness and

by changing the colors to warm-colors and

Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)

Captures film-like monochrome images by increasing the contrast of midlevel brightness and emphasizing the rough grainy feel on the image.

Open the LCD monitor.

Set the recording mode to either A video or B still image.

switch the mode between video and still image, tap A or B on the

To recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

Tap “RECORDING EFFECT”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Page 36

RECORDING EFFECT

OFF

GRAINY

MONOCHROME

BABY

FOOD

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

Recording

Tap “GRAINY MONOCHROME”.

Tap L to exit the menu.

Tap J to return to the previous screen.

Start recording.

To cancel the setting, repeat the procedure from the beginning and tap “OFF” in Step 5.

Recording Food Images (FOOD)

Captures food images such that the food looks appetizing even under fluorescent lighting in homes by changing the colors to warm-colors and deepening the colors.

Open the LCD monitor.

Set the recording mode to either A video or B still image.

switch the mode between video and still image, tap A or B on the

To recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

Tap “RECORDING EFFECT”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Page 37

RECORDING EFFECT

OFF

GRAINY

MONOCHROME

BABY

FOOD

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

Recording

Tap “FOOD”.

Tap L to exit the menu.

Tap J to return to the previous screen.

Start recording.

To cancel the setting, repeat the procedure from the beginning and tap “OFF” in Step 5.

Recording Images of a Baby (BABY)

Captures a soft and gentle image by lightening the skin tone while retaining

reddish hue, enhancing the skin beautifying effect as well as smoothing

the the appearance of the skin.

Open the LCD monitor.

Set the recording mode to either A video or B still image.

switch the mode between video and still image, tap A or B on the

To recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

Tap “RECORDING EFFECT”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Page 38

RECORDING EFFECT

OFF

GRAINY

MONOCHROME

BABY

FOOD

Recording

Tap “BABY”.

Tap L to exit the menu.

Tap J to return to the previous screen.

Start recording.

To cancel the setting, repeat the procedure from the beginning and tap “OFF” in Step 5.

Page 39

Capturing Subjects Clearly (TOUCH PRIORITY

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

OFF

TOUCH PRIORITY AE/AF

TRACKING

COLOR

SELECT

AREA

TRACKING

FACE

AREA SELECT

COLOR TRACKING

FACE TRACKING

AE/AF)

“TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness based on a tapped position. This function is available for both videos and still images.

Open the LCD monitor.

Set the recording mode to either A video or B still image.

switch the mode between video and still image, tap A or B on the

To recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively.

Tap “MENU”.

Tap the desired setting.

Focus and brightness will be adjusted automatically based on the tapped position (face/color/area). A blue frame appears around the selected

subject (face/color), while a white frame appears around the

selected area.

To reset, tap the desired position (face/color/area) again.

To cancel “FACE TRACKING” or “COLOR TRACKING”, tap the blue frame.

To cancel “AREA SELECT”, tap the white frame.

Setting Details

OFF Deactivates the function.

Recording

The top menu appears.

Tap “RECORD SETTING”.

Tap “TOUCH PRIORITY AE/AF”.

FACE TRACKING

COLOR TRACKING

AREA SELECT

appears on the screen. Recording is performed while

e tracking and automatically adjusting the tapped face (subject) with appropriate focus and brightness. In addition, a blue frame appears around the tapped face (subject).

appears on the screen. Recording is performed while

f tracking and automatically adjusting the tapped color (subject) with appropriate focus. In addition, a blue frame appears around the tapped color (subject).

appears on the screen. Recording is performed while

g automatically adjusting the tapped area (fixed position) with appropriate focus and brightness. In addition, a white frame appears around the tapped area. AREA SELECT in TOUCH PRIORITY AE/AF is only available within the optical zoom range. (unavailable when digital zoom is being used)

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Page 40

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

ON(ENH.AIS)

ON(AIS)

DIS

OFF

Recording

Memo :

When “TOUCH PRIORITY AE/AF” is set, “FOCUS” will be set to “AUTO” automatically.

Tap the selected position (face/color/area) again to cancel the setting.

Tap on an unselected position (face/color/area) to reset.

If the camera loses track of a subject, tap the subject again.

Settings are canceled when zoom operation is performed. (“AREA SELECT” only)

When “COLOR TRACKING” is set, the targeted subject (color) may change if similar colors are detected. In this case, tap the subject again. The targeted subject (color) may also be tracked back again if it appears in the center of the screen within a specific time.

Caution :

Subjects near the sides of the LCD monitor may not respond or be recognized when tapped. In this case, move the subject to the center and tap again.

“FACE TRACKING” may not work properly depending on the shooting conditions (distance, angle, brightness, etc.) and the subject (direction of face, etc.). It is also particularly difficult to detect faces in backlight.

“COLOR TRACKING” may not function properly in the following cases:

- when recording subjects with no contrast

- when recording subjects that are moving at high speed

- when recording in a dark place

- when the surrounding brightness changes

“AREA SELECT” is not available while the digital zoom is in use.

When “FACE TRACKING” is set, the subject may be lost if the camera is moved vertically or horizontally very fast.

Reducing Camera Shake

When the image stabilizer is set, camera shake during video recording can be effectively reduced.

Tap “MENU”.

Tap “RECORD SETTING”.

Tap “OIS”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Tap the desired setting.

Page 41

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

Recording

Setting Details

OFF

ON (AIS)

s (Enhanced AIS)

Deactivates image stabilizer.

Reduces camera shake under normal shooting conditions.

Reduces camera shake more effectively when shooting bright scenes on the wide angle end. Only on the wide angle end (approx. 5x).

The area of correction in the enhanced AIS mode is greater than that in the AIS mode. Camera shake can be reduced more effectively by zooming from wide angle to telephoto.

even when recording is performed

Memo :

It is recommended to set the image stabilizer to “OFF” when shooting a subject of little movement with the unit on a tripod.

Complete

This setting is effective for video recording only.

Using the image stabilizer will narrow the angle of view.

Dynamic zoom is not available in the enhanced AIS mode.

The resolution for the enhanced AIS mode is lower compared to the other modes.

stabilization may not be possible if camera shake is excessive.

Recording at Intervals (TIME-LAPSE RECORDING)

This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud.

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

Tap “TIME-LAPSE RECORDING”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Page 42

OFF

INTERVAL

20SEC

INTERVAL

5SEC

INTERVAL

1SEC

TIME-LAPSE RECORDING

0:00:01 [5:56]

0:00:00:01

Recording

Tap to select a recording interval (1 to 80 seconds).

If the icon is not displayed on the screen, tap 1 to scroll the screen.

greater the number of seconds, the longer the recording interval.

The

Tap L to exit the menu.

Tap J to return to the previous screen.

Start recording.

A frame is taken at intervals of the selected period.

When the recording interval is set to “20SEC INTERVAL” or higher, this unit switches to the power-saving mode between recordings. At the next point to record, the power-saving mode will be turned off and recording will start automatically.

Settings of Time-Lapse recording are not saved when the power is turned off.

Indications During Time-Lapse Recording

Time-Lapse Setting

The greater the number of seconds, the longer the recording interval.

Setting Details

OFF Deactivates the function.

1SEC INTERVAL Takes a frame at 1-second intervals.

5SEC INTERVAL Takes a frame at 5-second intervals.

20SEC INTERVAL Takes a frame at 20-second intervals.

80SEC INTERVAL Takes a frame at 80-second intervals.

Recorded videos will be played back at 30 times speed.

Recorded videos will be played back at 150 times speed.

Recorded videos will be played back at 600 times speed.

Recorded speed.

videos will be played back at 2 400 times

Caution :

During the time-lapse recording, video quality is set to XP mode.

Audio cannot be recorded during time-lapse recording.

When

recording is stopped with the recorded time less than “0:00:00:14”,

the video will not be saved.

Zooming, simultaneous still image recording, and image stabilizer are not available in time-lapse recording.

When Time-Lapse recording is set, you cannot record still images.

Memo :

Settings of time-lapse recording are reset when the power is turned off. To

start time-lapse recording again, it is necessary to make the selection

once more.

Recording stops automatically 99 hours after it is started.

Make use of a tripod and AC adapter for time-lapse recordings with long intervals. It is also recommended to fix the focus and white balance manually.

“Tripod Mounting” (A p. 17)

Display Description

Recording interval Displays the recording interval that is set.

Recorded Time Displays the actual recorded time of the video.

Actual Elapsed Time

Remaining Recording Time

Recorded time increases in units of frames.

Displays the actual elapsed time after recording starts.

Remaining time left to record with the currently selected video quality.

Page 43

Using the Self-timer

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

OFF

SELF-TIMER

You can record video or still image using the self-timer. This is useful when taking a video or still image that includes the photographer. The 2-second self-timer is useful for preventing camera shake caused by pressing the shutter button when taking a still image.

Memo :

When shooting a photo using the self-timer function, use of a tripod is recommended.

“Tripod Mounting” (A p. 17

Using the Self-timer in Video Mode

Open the LCD monitor.

Check if the recording mode is A.

this unit is in the still image mode B, tap the D (video/still image)

If button on the touch screen to display the mode switching screen. Tap A to switch the mode to video.

Tap “MENU”.

)

Tap “SELF-TIMER”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Tap “ON”.

Press the START/STOP button.

The countdown to recording appears and recording will start after 5 seconds.

To stop the self-timer, press the recording button again.

Recording

Tap “RECORD SETTING”.

The top menu appears.

Page 44

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

2SEC

10SECOFF

SELF-TIMER

Recording

Using the Self-timer in Still Image Mode

Open the LCD monitor.

Check if the recording mode is B.

If the mode is A mode switching screen. Tap B to switch the mode to still image.

Tap “MENU”.

video, tap A on the recording screen to display the

Tap “2SEC” or “10SEC”.

Take a still image.

A timer appears and countdown to shooting starts.

To stop the self-timer, press the START/STOP button again.

Memo :

The START/STOP button on this unit cannot be used to adjust the focus in advance. To adjust the focus in advance, press and hold the A button on the touch screen until the focus is adjusted.

“Start recording after adjusting the focus” (A p.

While the countdown timer is displayed, the buttons cannot be used as they are not displayed on the screen.

23)

The top menu appears.

Tap “RECORD SETTING”.

Tap “SELF-TIMER”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Page 45

Recording at a Fixed Interval and Playing

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

SELF-CHECK REC/PLAY

5(&25',1*7,0(㸸6(& $872'(/(7(㸸2))

START

SET

RECORDING TIME

AUTO DELETE

SELF-CHECK REC/PLAY

STOP

SELF-CHECK REC/PLAY

STOP

SELF-CHECK REC/PLAY

STOP

Back Repeatedly

recording for a specified duration, this unit automatically plays back the

After scene and then repeats the recording process and the playback process over and over again. This can be used to check a sports form or dance form. The recorded scene can also be deleted automatically depending on the setting.

Open the LCD monitor.

Recording

Tap “SET”.

RECORDING TIME 10 to 40 seconds (Can be set in 5-second interval.)

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

Tap “SELF-CHECK REC/PLAY”.

AUTO DELETE Off: The recorded video is retained.

On: The recorded video is deleted.

Tap L to return to the previous screen.

This operation is not necessary if you do not intend to change the current setting displayed.

Tap “START”.

There is a 5 second countdown before recording starts at the beginning of the operation only.

When the recording starts, the color of the number changes and the remaining number of seconds for recording is displayed.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

When recording is complete, playback starts automatically.

When playback ends, the next recording starts automatically.

Tap “STOP” to exit “SELF-CHECK REC/PLAY”.

Memo :

The

START/STOP button cannot be used during the “SELF-CHECK REC/

PLAY” operation.

Page 46

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

SET

Recording

Recording Videos with Date and Time

You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.)

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap “MENU”.

Select the type of clock with 0 or 1, and tap “SET”.

When “SET” is tapped, the precaution for date/time recording appears.

Tap L to exit the menu.

Tap the display position with your finger and drag your finger to adjust.

the date and time display while touching it with your finger and

Move tracing it on a screen.

Press the START/STOP button to start recording.

The top menu appears.

Tap “RECORD SETTING”.

Tap “DATE/TIME RECORDING”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Press the START/STOP button again to stop recording.

Tap J to return to the screen for selecting the types of clock.

Tap L to exit “DATE/TIME RECORDING”. (To perform operations other than recording, tap L to cancel the “DATE/TIME RECORDING” first.)

Caution :

The date and time cannot be deleted after recording.

Page 47

Recording Videos with Time Counter

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

You can take a video with a stopwatch recorded. You can start, stop and reset the stopwatch as with any stopwatch. This can be used to record sports video. (The recorded time counter cannot be deleted afterward.)

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap “MENU”.

The position can be adjusted when the recording stops.

Press the START/STOP button to start recording.

Press the START/STOP button again to stop recording.

Tap L to exit “TIME COUNTER RECORDING” when the recording stops. (To

perform operations other than recording, tap L to exit the “TIME

COUNTER RECORDING” first.)

Tap “E START” on the screen to start the counter.

Recording

The top menu appears.

Tap “RECORD SETTING”.

Tap “TIME COUNTER RECORDING”.

If the icon is not displayed on the screen, tap 1 to scroll the screen.

Tap L to exit the menu.

Tap J to return to the previous screen.

Tap the display position with your finger and drag your finger to adjust.

You can start the recording after the counter has been started.

You can freely stop, reset or resume the counter during recording.

E START/STOP Starts and stops the counter.

RESET Sets the counter reading to 0:00:00.

Memo :

If “TIME COUNTER RECORDING” is exited while the counter is still running, “TIME COUNTER RECORDING” is operated.

If 24 hours have elapsed since the counter started running or if the clock has been set, the counter reading automatically returns to “0:00:00” and the counter stops running.

The recorded time counter cannot be deleted afterward.

the counter continues to count from where it left off the next time

Page 48

≪PLAY

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

REMAINING BATTERY

MAX RECORDING TIME

FREE

Recording

Checking the Remaining Recording Time

Display the remaining battery power and the remaining recording time.

Memo :

The remaining battery power and the remaining recording time are estimates.

The remaining recording time is displayed only during video mode.

The remaining recording time is displayed for the recording media that is currently selected.

Open the LCD monitor.

Check that the camera is set to the recording mode. If the camera is in the playback mode, click 3 to switch to recording mode.

Tap “MENU”.

The top menu appears.

Tap C.

Display the remaining recording time.

remaining recording time is displayed only in the video recording

The mode.

The remaining recording time is displayed for the recording media that is currently selected.

O is displayed instead of the remaining battery power when the AC adapter is connected.

To exit the display, tap L.

Page 49

Approximate Video Recording Time

Picture quality Built-in memory

4GB

UXP 15 m

XP 20 m

EP 1 h 20 m

Picture quality SDHC/SDXC card

4GB 8GB 16GB 32GB 64GB 128GB

UXP 20 m 40 m 1 h 20 m 2 h 40 m 5 h 40 m 11 h 30 m

XP 30 m 1 h 1 h 50 m 3 h 50 m 8 h 10 m 16 h 20 m

EP 1 h 40 m 3 h 30 m 7 h 14 h 28 h 50 m 57 h 50 m

The recording time indicated above will change depending on the recording conditions.

Approximate Number of Still Images (Unit: Number of Shots)

Image size Built-in memory SDHC/SDXC card

Recording

4GB 4GB 8GB 16GB 32GB 64GB

3680x2760(10M)(4:3) 500 600 1300 2500 5100 9999

1920x1080(2M)(16:9) 2500 3100 6400 9999 9999 9999

1440x1080(1.5M)(4:3) 3300 4200 8400 9999 9999 9999

640x480(0.3M)(4:3) 9999 9999 9999 9999 9999 9999

Still images that are captured during video recording or video playback are saved at a size of 1920 x 1080.

Approximate Duration of Built-in Battery

Actual recording time Continuous recording time

2 h 50 m 5 h 10 m

The above are values when “MONITOR BRIGHTNESS” is set to “3” (standard).

The actual recording time is the recording time when operations such as starting/stopping recording, turning on/off the unit or zooming is performed repeatedly.

Recording time may differ depending on the shooting environment and usage.

(Maximum Recording Time)

Page 50

≪PLAY

REC

≪REC

Playback

Playing Back Videos

followings are the types of playback that can be performed by this unit.

The

Item Description

Normal Playback

DIGEST PLAYBACK

PLAYBACK OTHER FILE

Caution :

Make a backup of important recorded data. It

is recommended to copy your important recorded data to a BD or other

recording media for storage.

“Resetting this Unit” (A p. 5)

Disclaimer

- We shall not be held responsible for loss of recorded contents when recording videos/audio or playback cannot be operated due to malfunctions in this unit, provided parts, or SD card.

- Once deleted, recorded contents (data), including data loss due to malfunctions in this unit, cannot be restored. Please be forewarned.

- JVC will not be responsible for any lost data.

- In order for quality improvement, defective recording medium is subject to be analyzed. Therefore, it may not be returned.

Plays back the recorded videos.

From the recorded video, scenes are extracted automatically, pieced together for a digest playback within the specified length. Start playback from “DIGEST PLAYBACK” in the “PLAYBACK SETTING” menu.

Videos with defective management information can be played back. Start playback from “PLAYBACK OTHER FILE” in the “PLAYBACK SETTING” menu.

Normal Playback

Plays back the recorded videos.

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap M to select the playback mode.

Tap the file (image).

Tap I/J to select the media for playback and change the index screen (thumbnail display).

L appears on the last image played back.

Lines

in different colors are displayed under the thumbnail display to

distinguish the recording date.

Playback starts.

Tap e to pause.

Tap u to return to the index screen.

Caution :

While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Do not use this unit with the LCD monitor reversed and closed for long periods of time, or in places exposed to direct sunlight or high temperatures.

The power may turn off to protect the circuit if the temperature of this unit rises too much.

Page 51

≪REC

0:01:23 0:12:34

Playback

Operation Buttons for Video Playback

During Index Screen Display

Display Description

A/B Switches between video and still image

(Date and Time Display)

> Displays the next index screen (thumbnail

< Displays the previous index screen (thumbnail

modes.

Moves to the previous/next date

display)

can perform the same operation with the

You zoom lever.

display)

can perform the same operation with the

You zoom lever.

Switches to the recording mode.

During Video Playback

this unit is not operated, the operation buttons on the touch screen

When disappear automatically. Tap on the screen to display the operation buttons again.

Display Description

A/B Switches between video and still image

modes.

(Timeline Bar) Tap on a random position - Moves to the

tapped position Drag playback point to the left or right - Starts playback from the new position Tap on a random position - Moves to the tapped position

(Pointer) Displays the current estimated playback

position within the scene

Saves one scene of the video being played back as a still image.

Displayed while playback is paused.

Displays the index screen (thumbnail display) to perform deletion

I/J Switches between the memories in which

images are recorded (I built-in memory/J SD card)

MENU Displays the menu screen

Thumbnail (File) Tap: Starts playback

to right: Displays the file taken before the

Drag recording date Drag to left: Displays the file taken after the recording date Thumbnails with the same underlined color indicate files with the same recording date.

j (during playback)

l (during pause mode)

i (during playback)

k (during pause mode)

e d

Returns to the beginning of the scene Returns

the previous scene if tapped at the beginning

to of a scene.

Allows the same functions as the zoom lever to be performs while pausing playback.

Reverse search (speed increases with each tap)

Reverse slow-motion / Press and hold to start reverse slow playback

Starts playback

Pause

Forward search (speed increases with each tap)

Forward slow-motion / Press and hold to start slow playback

Advances to the next scene

The speed can be set using

“SLOW-

MOTION SPEED” (A p. 93) .

Switches the display between full (m) and simple (n) with every tap of the button.

Simple display: Some displays disappear automatically when the screen is not operated.

Full display: Displays everything. The display button changes from n to m.

When the power is turned off, the display setting will revert to simple display (n).

Switches to the recording mode.

Stop (returns to index screen)

Page 52

VOL.

＋

Turn up the volume

Turn down the volume

Playback

MENU Displays the menu screen

Deletes the currently displayed video.

Enlarges the displayed video.

Tap the position of the image you want to enlarge.

Zoom ratio changes by using the (+) and (-) buttons.

Memo :

Tap or drag on the operation area of the touch screen.

The recording date and time can be displayed on the screen during playback.

(A p. 93)

Adjusting the Volume of Videos

You can use the zoom/volume lever to control the volume.

Page 53

≪PLAY

REC

≪REC

0:01:23 0:12:34

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

00:10:00

: : : :

PROTECT

QUALITY

PB TIME

DATE/TIME

OFF

Playback

Checking the Recording Date and Other Information

You can see the recording information of the recorded videos.

Open the LCD monitor.

Tap A or B to select the video or still image mode.

Tap M to select the playback mode.

Tap C.

Tap L to exit the menu.

You can display the recording date and duration of the selected file.

Tap on the file to start playback.

Tap “MENU”.

Page 54

≪PLAY

REC

≪REC

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

PLAYBACK SETTING

TIME COUNTER PLAYBACK

OFF

≪REC

0:01:23 0:12:34

RESET

Button

Display

Button

Playback

TIME COUNTER PLAYBACK

A time counter that can be reset can be displayed during playback. This can be used to play sports video.

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap M to select the playback mode.

Set “TIME COUNTER PLAYBACK” to ON.

Tap on the file to start playback.

An hours:minutes:seconds counter appears.

Pause the playback and reset the counter.

Tap “MENU”.

Tap “PLAYBACK SETTING”.

Tap “TIME COUNTER PLAYBACK”.

Tapping “RESET” sets the counter reading to “0:00:00”.

The 1/10 second digit is displayed while playback is paused.

The counter can also be reset during normal playback and slow playback.

Memo :

To reset the counter during playback, switch to full display using the “Display Buttonn” (A p. 21) button.

To reset the counter at the precise position, it is recommended to pause the playback then tap “RESET”.

When the unit switches to the next scene, the counter is automatically reset.

Page 55

≪PLAY

REC

≪REC

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

DIGEST PLAYBACK

PLAYBACK SETTING

SELECT DATE

2h21m

≪REC

1 min

1 min 5 min

5 min

5 min 15 min

15 min

15 min 45 min

45 min

3 min

10 min

30 min

60 min

3 min 10 min 30 min 60 min

DIGEST TIME

≪REC

DIGEST

0:01:23 0:12:34

Playback

DIGEST PLAYBACK

You can play back a digest of recorded videos (Digest Playback). This is useful for checking the content of videos quickly.

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap M to select the playback mode.

Tap “MENU”.

Tap to select a date for Digest Playback.

After selecting a date, tap “NEXT”.

When “ALL” is tapped, Digest Playback will be performed for all the dates.

Tap L to exit the menu.

Tap J to return to the previous screen.

Select the Digest Playback time

(Only when “AUTO” is selected in Step 7)

Select the Digest Playback time in minutes (min).

time display of Digest Playback varies according to the recording

The time.

When it takes time (more than 2 seconds) for “DIGEST PLAYBACK” to start after selecting Digest Playback time, a progress status will be displayed.

The Digest Playback time is only a guide.

Digest Playback starts.

Tap “PLAYBACK SETTING”.

Tap “DIGEST PLAYBACK”.

Tap e to pause.

Tap u to return to the index screen.

Tap “DIGESTL“ to return to the normal playback screen.

Operations During Video Playback

“Operation Buttons for Video Playback” (A p. 51)

Page 56

TO NORMAL PLAYBACK

PLAYBACK AGAIN

SELECT DATE

≪PLAY

REC

≪REC

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

PLAYBACK SETTING

PLAYBACK OTHER FILE

Playback

Digest playback stops automatically, or display the next screen by tapping “MENU”.

TO NORMAL PLAYBACK: start normal playback.

PLAYBACK AGAIN: start the digest playback again.

SELECT DATE: return to step 6.

PLAYBACK OTHER FILE

The management information of a video may be damaged if recording is not performed You can perform the following operations to play back the videos with defective management information.

correctly, such as turning off the power in the middle of recording.

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap M to select the playback mode.

Tap “MENU”.

Tap “PLAYBACK SETTING”.

Tap “PLAYBACK OTHER FILE”.

Page 57

≪REC

≪PLAY

≪REC

Tap on the file to start playback.

Playback

Playing Back Still Images

can select and play back the recorded still images from an index screen

You (thumbnail display).

Open the LCD monitor.

“Operation Buttons for Video Playback” (A p. 51)

Tap “L” to return to the usual index screen.

Memo :

An MTS file is created in the EXTMOV folder when management information is corrupted.

Depending on the condition of the damaged file, playback might fail or may not run smoothly.

Check if the recording mode is B.

If the mode is A

video, tap A on the recording screen to display the

mode switching screen. Tap B to switch the mode to still image.

Tap M to select the playback mode.

Tap on the file to start playback.

Tap I/J to select the media for playback and change the index screen (thumbnail display).

Tap u to return to the index screen.

L appears on the last image played back.

in different colors are displayed under the thumbnail display to

Lines distinguish the recording date.

Page 58

≪REC

Playback

Operation Buttons for Still Image Playback

During Index Screen Display

Still images that are recorded continuously in high-speed or mediumspeed will be grouped together. Only the first recorded file (still image) is shown and the group is displayed with a green frame.

Display Description

A/B Switches between video and still image

(Date and Time Display)

> Displays the next index screen (thumbnail

modes.

Moves to the previous/next date

display)

can perform the same operation with the

You zoom lever.

During Still Image Playback

this unit is not operated, the operation buttons on the touch screen

When disappear automatically. Tap on the screen to display the operation buttons again.

Display Description

Video/Still Image Mode A/B

d / e Starts/pauses slideshow

Switches between video and still image modes.

Returns to the previous still image

can perform the same operation with the

You zoom lever.

Advances to the next still image

can perform the same operation with the

You zoom lever.

< Displays the previous index screen (thumbnail

I/J Switches between the index screen of the built-

MENU Displays the menu screen

File (Still Image) Tap on thumbnail - Starts playback

display)

can perform the same operation with the

You zoom lever.

Switches to the recording mode.

Displays the index screen (thumbnail display) to perform deletion

in memory and SD card

Drag to right - Scrolls to the right to show the previous index screen (thumbnail display)

to left - Scrolls to the left to show the next

Drag index screen (thumbnail display)

2Playback Zoom Enlarges the displayed video.

MENU Displays the menu screen

Switches to the recording mode.

Returns to index screen

Deletes the currently displayed still image.

Tap the position of the image you want to enlarge.

Zoom ratio changes by using the (+) and (-) buttons.

Memo :

Tap or drag on the operation area of the touch screen.

Caution :

This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it

functioning properly. In such a case, close the monitor screen to turn

from off the power and remove the AC adapter, then press the Reset button to reset this unit.

“Resetting this Unit” (A p. 5)

Page 59

≪REC

Playback

Slideshow Playback

Still images can be played back in a slideshow. Tap I during still image playback to start the slideshow.

“Operation Buttons for Still Image Playback” (A p. 58)

Memo :

Effects can be added to the transitions in slideshow playback.

“ SLIDE SHOW EFFECTS ” (A p. 95)

Connecting to and Viewing on TV

You can connect this unit to a TV for playback. The image quality on TV varies with the type of TV and the connecting cable. Select the connector that best suits your TV.

Refer also to the instruction manual of the TV in use.

“Connecting via the HDMI Mini Connector” (A p. 60 “Connecting via the AV Connector” (A p. 61)

To display the date and time on TV, set both “DISPLAY DATE/TIME” and “DISPLAY ON TV” to “ON”.

(A p. 93) “ DISPLAY ON TV ” (A p. 100)

Unnatural Displays on TV

Trouble Action

Images do not appear on the TV properly.

Images are projected vertically on the TV.

Images are projected horizontally on the TV.

Disconnect the cable and connect again.

Turn off and on this unit again.

Images may not appear properly when the remaining battery power is low. Use an AC adapter.

Set “VIDEO OUTPUT” in the “CONNECTION SETTINGS” menu to “4:3”.

“ VIDEO OUTPUT ” (A p. 100)

Adjust the TV's screen accordingly.

)

The color of images looks strange.

HDMI-CEC functions do not work properly, and the TV does not work in conjunction with this unit.

The language on the display changed.

Adjust the TV's screen accordingly.

TVs may operate differently depending on the specifications, even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC functions of this unit cannot be guaranteed to operate in combination with all the TVs. In such cases, set “HDMI CONTROL” to “OFF”.

“ HDMI CONTROL ” (A p. 100)

It may occur when you connect this unit to a TV with different language setting using an HDMI mini cable.

Caution :

Turn off this unit and the TV before making any connection.

Before inserting or removing the SD card, close the LCD monitor and ensure that the POWER/ACCESS lamp goes off.

Page 60

HDMI Mini Cable (Provided)

HDMI Connector Input

To HDMI Mini Connector

To USB Connector

Adapter Cable

(Provided)

AC Adapter

(Provided)

AC Adapter To AC Outlet(AC 100 V to 240 V)

External Input

≪REC

Playback

Connecting via the HDMI Mini Connector

If you are using an HDTV, you can play back in HD quality by connecting to the HDMI mini connector. “Optional Accessories” (A p. 19)

a High Speed HDMI mini cable as the HDMI mini cable when not using

Use the provided one.

Refer also to the instruction manual of the TV in use.

Connect to a TV.

Connect the adapter cable and AC adapter to this unit.

Memo :

Change the settings in “HDMI OUTPUT” according to the connection.

“ HDMI OUTPUT ” (A p. 100)

When connected to the TV via the HDMI mini cable, images and sounds may not be output properly depending on the TV connected. In such cases, perform the following operations.

1) Disconnect the HDMI mini cable and connect it again.

2) Turn off and on this unit again.

For questions about the TV or method of connection, contact your TV's manufacturer.

Open the LCD monitor.

The unit turns on automatically.

Press

the external input button on the TV to switch to the input from this

unit via the connected connector.

Play back a file.

“Playing Back Videos” (A p. 50)

“Playing Back Still Images” (A p. 57)

Page 61

Audio Input (R)

Audio Input (L)

Video Input

Red

White

Yel l o w

AV Cable (E3A-0085-00) (Provided)

AV Input

To AV Connector

To USB Connector

Adapter Cable

(Provided)

AC Adapter

(Provided)

AC Adapter To AC Outlet(AC 100 V to 240 V)

External Input

≪REC

Playback

Operating in Conjunction with TV via HDMI

Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cable allows linked operations with the TV to be performed.

HDMI-CEC (Consumer Electronics Control) is an industry standard that enables interoperability between HDMI-CEC compliant devices that are connected via HDMI cables.

Memo :

Not all HDMI control devices comply with the HDMI-CEC standard. The HDMI control function of this unit will not work when connected to these devices.

unit is not guaranteed to operate with all HDMI-CEC enabled devices.

This

Depending on the specifications of each HDMI-CEC enabled device, some functions may not work with this unit. (For details, refer to the instruction manual of your TV.)

Unintended operations may occur with some connected devices. In these cases, set “HDMI CONTROL” to “OFF”.

“ HDMI CONTROL ” (A p. 100)

Preparations

Connect an HDMI mini cable between this unit and the TV.

“Connecting via the HDMI Mini Connector” (A p. 60)

on the TV and set the HDMI-CEC related setting to “ON”. (For details,

Turn refer to the instruction manual of the TV.)

Set “HDMI CONTROL” in the CONNECTION SETTINGS menu to “ON”.

“ HDMI CONTROL ” (A p. 100)

Connecting via the AV Connector

To playback videos on TV, connect the AV cable (provided: E3A-0085-00) to the AV terminal of this unit.

Refer also to the instruction manual of the TV in use.

Connect to a TV.

Connect the adapter cable and AC adapter to this unit.

Operation Method 1

Turn on this unit.

Select the playback mode.

Connect the HDMI mini cable.

TV turns on automatically and switches to HDMI input mode when this unit is turned on.

Operation Method 2

Turn off the TV.

This unit turns off automatically.

Memo :

Depending on the TV connected, the display language of this unit will automatically unit is turned on. (This is applicable only if this unit supports the language selected for the TV.) To use this unit with a language that differs from the display language of the TV, set “HDMI CONTROL” to “OFF”.

The display language of the TV will not switch automatically, even if the display language of this unit is changed.

These functions may not work correctly when devices such as amplifier and selector are connected. Set “HDMI CONTROL” to “OFF”.

If HDMI-CEC does not work properly, turn off and on this unit again.

switch to the language that is selected for the TV when this

Open the LCD monitor.

The unit turns on automatically.

Press the external input button on the TV to switch to the input from this unit via the connected connector.

Play back a file.

“Playing Back Videos” (A p. 50)

“Playing Back Still Images” (A p. 57)

Page 62

Audio (Lch: white)

Audio (Rch: red)

Ground

Video (yellow)

Playback

Memo :

For questions about the TV or method of connection, contact your TV's manufacturer.

AV cable (provided: E3A-0085-00)

specifications (for video/audio) of the 4-pole mini plug are described

Wiring in the following. To purchase, consult your nearest JVC dealer or JVC service center.

When

using the provided AV cable, attach the core filter provided with this

unit first.

“Attaching the Core Filter” (A p. 8)

Page 63

≪REC

0:01:23 0:12:34

NOYES

(REMAINING SCENES: 0030)

DELETE?

REC

≪PLAY

≪REC

QUIT

SET

REL ALL

SEL ALL

DELETE

Editing

Deleting Unwanted Files

Delete unwanted videos and still images when the space in the recording media is running out. Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” (A p. 63) “Deleting Selected Files” (A p. 63

Memo :

Deleted files cannot be restored.

Files that are protected cannot be deleted. Release protection before deleting the file.

“Protecting Files” (A p. 64

Be sure to back up important files on a computer.

“Backing Up All Files” (A p. 78)

Deleting the Currently Displayed File

Deletes the currently displayed file.

Caution :

Deleted files cannot be restored.

Tap R.

)

Deleting Selected Files

Deletes the selected files.

Caution :

Deleted files cannot be restored.

Open the LCD monitor.

Tap A or B to select the video or still image mode.

Tap B or A on the recording screen to display the mode switching screen. Tap A to switch to the video mode A. Tap B to switch to the still image mode B.

Tap M to select the playback mode.

While the video mode is shown in the image, the same operations apply for the still image mode.

Tap “YES”.

Tap h / g to select the previous or next file.

When no file remains, the screen returns to the index screen.

While the video mode is shown in the image, the same operations apply for the still image mode.

Tap R.

Tap on the files to delete.

P appears on the selected files. To remove P from a file, tap on the file again.

Tap “SEL ALL” to select all files.

Tap “REL ALL” to release all selections.

Page 64

QUITSET

REL ALLSEL ALL

DELETE

RETURN

EXECUTE

DELETE?

(REMAINING SCENES: 0030)

STOP

≪REC

0:01:23 0:12:34

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

PROTECT/CANCEL

EDIT

PROTECT?

YES

Editing

Tap “SET”.

If no file is selected, the “SET” button cannot be pressed.

Tap “EXECUTE” to confirm the deletion.

After deleting is complete, tap “OK”.

To cancel the deletion, tap “QUIT”.

Protecting Files

Prevent important videos/still images from being deleted accidently by protecting them. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 64) “Protecting/Releasing Protection of Selected Files” (A p. 65

Caution :

When the recording media is formatted, even the protected files will be deleted.

Protecting/Releasing Protection of the Currently Displayed File

Protects or releases protection of the currently displayed file.

Tap “MENU”.

While the video mode is shown in the image, the same operations apply for the still image mode.

Tap “EDIT”.

)

Tap “PROTECT/CANCEL”.

Tap “YES”.

Tap h / g to select the previous or next file.

After setting, tap “OK”.

Page 65

REC

≪PLAY

≪REC

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

PROTECT/CANCEL

EDIT

SETREL ALL

SEL ALL

PROTECT/CANCEL

SETREL ALLSEL ALL

PROTECT/CANCEL

Editing

Protecting/Releasing Protection of Selected Files

Protects or releases protection of the selected files.

Open the LCD monitor.

Tap A or B to select the video or still image mode.

Tap B or A on the recording screen to display the mode switching screen. Tap A to switch to the video mode A. Tap B to switch to the still image mode B.

Tap M to select the playback mode.

Tap on the files to protect or release protection of.

P appears on the selected files. To remove P from a file, tap on the file again.

and P are displayed on the files that are already protected.

I To release protection of a file, tap on the file such that P is removed.

Tap “SEL ALL” to select all files.

Tap “REL ALL” to release all selections.

Tap “SET” to complete the setting.

Protect marks I

appear on the selected files.

Protect marks I disappear from the deselected files.

While the video mode is shown in the image, the same operations apply for the still image mode.

Tap “MENU”.

Tap “EDIT”.

Tap “PROTECT/CANCEL”.

Page 66

≪PLAY

REC

≪REC

0:01:23 0:12:34

≪REC

0:01:23 0:12:34

Editing

Capturing a Still Image in the Video During Playback

You can capture still images of the scenes you like in the recorded videos.

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap M to select the playback mode.

Tap the A button.

Memo :

Still images are captured with a size of 1920×1080.

Captured still images are stored in the media where the video is being played back from.

Tap on the desired video.

Tap pause e at the desired scene during playback.

After pausing the video, you can fine-tune the point to capture by tapping forward slow-motion k and reverse slow-motion l.

Page 67

Combining Videos Recorded by Seamless

≪PLAY

REC

≪REC

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

SEAMLESS REC CTRL

EDIT

COMBINE SCENES

SEAMLESS REC CTRL

NOYES

COMBINE WITH THIS SCENE?

THE ABOVE SCENE IS FOUND

SD CARDBUILT-IN MEMORY

THE COMBINED SCENES

SELECT THE MEDIA TO STORE

NOYES

START COMBINING THE SCENES?

Recording

Videos that are recorded on two separate media and with “SEAMLESS RECORDING” in the video recording menu enabled can be combined into a single video. “ SEAMLESS RECORDING ” (A p. 88)

Open the LCD monitor.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap M to select the playback mode.

Tap “COMBINE SCENES”.

This unit starts a search to detect seamless videos. Combining cannot be performed if no seamless videos are found.

Tap “YES”.

Tap the media to store to.

Editing

Tap “MENU”.

Tap “EDIT”.

Tap “SEAMLESS REC CTRL”.

Tap “YES”.

Combining of the videos starts.

After videos are combined, tap “OK”.

Memo :

Seamless the built-in memory or SD card. Check the amount of remaining free space before combining.

videos cannot be combined if there is not enough free space in

How to Enable Seamless Video Recording Again

To start seamless recording again after the previous session is complete, it is necessary to combine seamless videos, or delete the combination information of the seamless videos. To delete the combination information of seamless videos, select “DEL COMBINED SCENES” in step 6.

Page 68

≪PLAY

REC

≪REC

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

TRIMMING

EDIT

QUIT

TRIMMING

0:01:23 0:12:34

QUIT

TRIMMING

0:01:23

A 0:00:23

0:12:34

QUIT

TRIMMING

0:01:23

A 0:00:23 B 0:12:34

0:12:34

QUIT

SET

TRIMMING

NOYES

SPECIFIC AREA?

DO YOU WANT TO CAPTURE A

Editing

Capturing a Required Part in the Video (TRIMMING)

Select the required part of a video and save it as a new video file.

The original video remains in its existing location.

Open the LCD monitor.

Tap the video to edit.

Tap e to pause playback at the desired start point, then tap “A”.

Check if the recording mode is A.

the mode is B still image, tap B on the recording screen to display

If the mode switching screen. Tap A to switch the mode to video.

Tap M to select the playback mode.

Tap “MENU”.

Tap “EDIT”.

When “A” is tapped, the start point is set.

After setting the start point, tap d to continue playback.

Tap e to pause playback at the desired end point, then tap “B”.

When “B” is tapped, the end point is set.

To reset the start or end point, tap “A” or “B” at the desired scene (position).

You can fine adjust the position by pressing l

and k while

playback is paused.

Tap “SET”.

Tap “TRIMMING”.

When “SET” is tapped, the trimming area is confirmed.

Tap “YES”.

After copying, tap “OK”.

When copying finishes, the copied file is added to the index screen.

Memo :

The division point may deviate slightly from the selected scene.

Page 69

Dubbing Files to a Disc by Connecting to a

Blu-ray Recorder

USB Cable

(Provided)

USBUSB

CONNECT TO OTHER

TYPE TO CONNECT

SELECT DEVICE

SD CARDBUILT-IN MEMORY

SELECT MEDIA TO OPEN

CONNECT TO OTHER

CONNECT TO OTHER SD CARD

Blu-ray Recorder

can dub videos in the high definition quality by connecting an AVCHD-

You compliant Blu-ray recorder to this unit via a USB cable. For details on creating the disc, refer to the instruction manual of your Blu-ray recorder.

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Open the terminal cover.

Connect to a Blu-ray recorder.

Connect using the USB cable provided with this unit.

Open the LCD monitor.

making any connection, close the LCD monitor to turn off this

Before unit.

Tap the desired media.

The following screen is displayed after the camera operation is completed.

Operations are to be performed on the Blu-ray recorder after the screen switches.

Perform dubbing on the Blu-ray recorder.

Refer also to the instruction manual of the Blu-ray recorder.

After dubbing is complete, close the LCD monitor of this unit and check

that the POWER/ACCESS lamp goes off before disconnecting the USB cable. Operations cannot be performed on this unit until the USB cable is disconnected.

Copying

This unit turns on and the “SELECT DEVICE” screen appears.

Tap “CONNECT TO OTHER”.

Page 70

REC

≪PLAY

≪REC

OFF

TOP MENU

SETTING

PLAYBACK

EDIT

SETTINGS

CONNECTION

SETUP

EDIT

COPY

QUIT

SETREL ALL

SEL ALL

QUANTITY:0030

QUITSET

REL ALL

SEL ALL

QUANTITY:0030

NOYES

START COPY?

COPY QUANTITY:30

COPY VIDEO

Copying

Copying Files to an SD Card

Tap “COPY”.

You can copy videos and still images from the built-in memory to SD card. Copying

still images to cards makes it convenient to bring them to the shop

for printing (developing).

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Caution :

Make sure that there is enough space left in the destination medium.

Videos in the SD card cannot be copied to the built-in memory.

Open the LCD monitor.

Tap A or B to select the video or still image mode.

Tap M to select the playback mode.

Tap on the files to copy.

P appears on the selected files. To remove P from a file, tap on the file again.

Tap “SEL ALL” to select all files.

Tap “REL ALL” to release all selections.

Tap “SET”.

The

Tap “MENU”.

Tap “EDIT”.

mode changes between recording and playback with every tap.

“SET” is deactivated when no file is selected.

Tap “YES”.

Copying starts.

After copying, tap “OK”.

Page 71

Copying to Windows PC

You can copy files to a computer using the provided software. Discs can also be created using the computer’s DVD or Blu-ray drive. If the provided software is not installed, this unit will be recognized as an external storage when connected.

Memo :

To record to discs, a recordable DVD or Blu-ray drive is required for the computer in use.

To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video). For details, refer to the Pixela homepage.

http://www.pixela.co.jp/oem/jvc/mediabrowser/e/

Backing up of files using other softwares is not supported.

Trouble with Using the Provided Software Everio MediaBrowser 4

Consult the customer service center below.

Pixela User Support Center

Copying

Telephone USA and Canada (English): +1-800-458-4029 (toll-free)

Homepage

For details on how to use the software, refer to “MediaBrowser Help” in the “Help” menu of Everio MediaBrowser 4.

Europe (UK, Germany, France, and Spain) (English):+800-1532-4865 (toll-free) Other Countries in Europe (English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090

http://www.pixela.co.jp/oem/jvc/mediabrowser/e/

Verifying System Requirements (Guideline)

Windows 10

Right-click the “start button”, then select and click “System”.

If a “This PC” icon is shown on desktop, right-click the icon and select “Properties” in the menu to display your computer information.

Page 72

㩷

Copying

Windows 8/Windows 8.1

Display “Apps”. (For Windows 8) Click the “Search” charm. (For Windows 8.1) Click F.

Right-click “Computer” or “PC” in the “Windows System Tool” menu to select the checkbox.

Click “Properties” on the bottom bar to display.

If a “Computer” icon is shown on desktop, right-click the icon and select “Properties” in the menu to display your computer information.

Page 73

Windows 7

Click the start button.

Right-click Computer.

Copying

Click “Properties”.

Page 74

Copying

Check the items with the table below.

OS Windows 10 64-bit

CPU Intel Core Duo, CPU 1.66 GHz or higher

RAM At least 2 GB At least 2 GB

Video editing Intel Core i7, CPU 2.53 GHz or higher recommended Intel Core i7, CPU 2.53 GHz or higher recommended

Other requirements

Display: 1024×768 pixels or above (1280×1024 pixels or above recommended) Graphic: Intel G965 or higher recommended

Windows 10 Home or Windows 10 Pro (Pre-installed versions, desktop mode only) Windows 8 64-bit Windows 8 or Windows 8 Pro (Pre-installed versions, desktop mode only) Windows8.1 64-bit Windows8.1 or Windows8.1 Pro (Pre-installed versions, desktop mode only)

(Intel Core 2 Duo, CPU 2.13 GHz or higher recommended)

Windows 10/Windows 8/Windows 8.1 Windows 7

Windows 7 32/64-bit Home Premium (Pre-installed versions only) Service Pack 1

Intel Core Duo, CPU 1.66 GHz or higher (Intel Core 2 Duo, CPU 2.13 GHz or higher recommended)

Memo :

If your PC does not meet the above system requirements, operations of the provided software cannot be guaranteed.

For more information, contact your PC's manufacturer.

Page 75

To USB Connector

Computer

CONNECT TO PC

TYPE TO CONNECT

SELECT DEVICE

PLAYBACK ON PC

CONNECT TO PC

Copying

Installing the Provided Software (Built-in)

You can display the recorded images in calendar format and perform editing using the provided software.

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Preparations

Connect this unit to a computer with a USB cable.

Windows 10

Open the terminal cover.

Connect to your PC using the provided USB cable.

Before connecting the cable, close the LCD monitor to turn off this unit.

Open the LCD monitor.

Perform the following operations on your computer.

Open the “Start menu”, then click “All apps”.

Click “This PC” in the “Windows System” menu.

a “This PC” icon is shown on desktop, double-click the icon to open “This

PC”.

Double-click the “JVCCAM_APP” icon in “Devices with Removable Storage”.

This unit turns on and the “SELECT DEVICE” menu appears.

Tap “CONNECT TO PC”.

Tap “PLAYBACK ON PC”.

Disconnect the USB cable to return to the recording or playback screen.

“Everio Software Setup” appears on the computer. Operations are to be performed on the computer after the screen switches.

Double-click “install (or Install.exe)”.

Click “Yes” on the User Account Control screen.

“Software Setup” appears after a while.

Click “Everio MediaBrowser 4”.

Follow the on-screen instructions to finish the installation.

Page 76

To USB Connector

Computer

CONNECT TO PC

TYPE TO CONNECT

SELECT DEVICE

PLAYBACK ON PC

CONNECT TO PC

㩷

Copying

Click “Finish”.

Click “Quit”.

Installation is complete, and two icons are created on the desktop.

Remove this unit from your PC.

“Disconnecting this Unit from Computer” (A p. 79)

Memo :

If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP” in

“My Computer” or “Computer”, then double-click “install (or Install.exe)”.

If the auto play dialog box appears, select “Open folder to view files” and click “OK”. Then, click “install (or Install.exe)” in the folder.

Windows 8/Windows 8.1

Tap “PLAYBACK ON PC”.

Disconnect the USB cable to return to the recording or playback screen.

“Everio Software Setup” appears on the computer. Operations are to be performed on the computer after the screen switches.

Perform the following operations on your computer.

Display “Apps”. (For Windows 8) Click the “Search” charm. (For Windows 8.1) Click F.

Click “Computer” or “PC” in the “Windows System Tool” menu.

Open the terminal cover.

Connect to your PC using the provided USB cable.

Before connecting the cable, close the LCD monitor to turn off this unit.

Open the LCD monitor.

This unit turns on and the “SELECT DEVICE” menu appears.

Tap “CONNECT TO PC”.

If a “Computer” icon is shown on desktop, double-click the icon to open “Computer”.

Double-click the “JVCCAM_APP” icon in “Devices with Removable Storage”.

Double-click “install (or Install.exe)”.

Click “Yes” on the User Account Control screen.

“Software Setup” appears after a while.

Page 77

To USB Connector

Computer

CONNECT TO PC

TYPE TO CONNECT

SELECT DEVICE

PLAYBACK ON PC

CONNECT TO PC

Click “Everio MediaBrowser 4”.

Follow the on-screen instructions to finish the installation.

Click “Finish”.

Click “Quit”.

Tap “PLAYBACK ON PC”.

“Everio Software Setup” appears on the computer. Operations are to be performed on the computer after the screen switches.

Perform the following operations on your computer.

Click “Open folder to view files” on the auto play dialog box, and then double-click “install.exe”.

Click “Yes” on the User Account Control screen.

Copying

Installation is complete, and two icons are created on the desktop.

Remove this unit from your PC.

“Disconnecting this Unit from Computer” (A p. 79)

Memo :

If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP”

“My Computer” or “Computer”, then double-click “install (or Install.exe)”.

If the auto play dialog box appears, select “Open folder to view files” and click “OK”. Then, click “install (or Install.exe)” in the folder.

Windows 7

Open the terminal cover.

Connect to your PC using the provided USB cable.

Before connecting the cable, close the LCD monitor to turn off this unit.

Open the LCD monitor.

“Software Setup” appears after a while.

If it doesn’t appear, double-click “JVCCAM_APP” in “Computer” or “My Computer”, then double-click “install.exe”.

This unit turns on and the “SELECT DEVICE” menu appears.

Tap “CONNECT TO PC”.

Page 78

To USB Connector

Computer

CONNECT TO PC

TYPE TO CONNECT

SELECT DEVICE

BACK UP

CONNECT TO PC

Copying

Click “Everio MediaBrowser 4”.

Follow the on-screen instructions to finish the installation.

Click “Finish”.

Click “Quit”.

Installation is complete, and two icons are created on the desktop.

Remove this unit from your PC.

“Disconnecting this Unit from Computer” (A p. 79)

Memo :

If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP”

“My Computer” or “Computer”, then double-click “install (or Install.exe)”.

If the auto play dialog box appears, select “Open folder to view files” and click “OK”. Then, click “install (or Install.exe)” in the folder.

Backing Up All Files

Before making backup, make sure that enough free space is left in the computer's hard disk (HDD). Backup will not start if there is not enough free space.

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Open the terminal cover.

Connect to your PC using the provided USB cable.

Before connecting the cable, close the LCD monitor to turn off this unit.

Open the LCD monitor.

This unit turns on and the “SELECT DEVICE” menu appears.

Tap “CONNECT TO PC”.

Tap “BACK UP”.

Disconnect the USB cable to return to the recording or playback screen.

The provided software Everio MediaBrowser 4 starts up on the computer. The subsequent operations are to be performed on the computer.

Page 79

Click

Click “Next”

Click “All volume in camcorder”

Click

Saving Destination (PC)

Click

Copying

Select the source of the image file.

Start backup.

Backup starts.

After backup is complete, click “OK”.

Disconnecting this Unit from Computer

Click “Safely Remove Hardware and Eject Media”.

Click all “JVCCAM~”.

Disconnect the USB cable and close the LCD monitor.

Remove this unit from your PC.

Memo :

Before making backup, load the SD card in which the videos and still images are stored on this unit.

If you encounter any problems with the provided software Everio MediaBrowser 4, please consult the “Pixela User Support Center”.

Telephone USA and Canada (English): +1-800-458-4029 (toll-free)

Homepage

Delete unwanted videos before making backup. It takes time to back up many videos.

“Deleting Unwanted Files” (A p. 63

Europe (UK, Germany, France, and Spain) (English):+800-1532-4865 (toll-free) Other Countries in Europe (English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090

http://www.pixela.co.jp/oem/jvc/mediabrowser/e/

)

Page 80

Click

Recording Month

Recording Date

Click

Input the name of the new user list

Recording Date

Drop

Drag

Thumbnails

User List

Still Image

Video

Copying

Organizing Files

After backing up your files, organize them by adding labels such as “Family Trip” or “Athletic Meet”. This is useful not only for creating discs, but for viewing the files too.

Double-click on the Everio MediaBrowser 4 icon.

The provided software starts up.

Display the month of the files to organize.

Create a user list.

Identifying Video or Still Image：

You can select files using the “SELECT” menu on the top right of the screen.

Check the video/still image icon on the top right corner of the thumbnail.

Memo :

If you encounter any problems with the provided software Everio MediaBrowser 4, please consult the “Pixela User Support Center”.

A new user list is added to the user list library.

Click on the recording day.

The thumbnails of the files recorded on the day are displayed.

Telephone USA and Canada (English): +1-800-458-4029 (toll-free)

Europe (UK, Germany, France, and Spain) (English):+800-1532-4865 (toll-free) Other Countries in Europe (English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090

Homepage

http://www.pixela.co.jp/oem/jvc/mediabrowser/e/

Page 81

Click

Drop

Drag

Click

Copying

Recording Videos to Discs

Copy the files that are arranged using the user list to discs.

Insert a new disc into the PC’s recordable DVD drive.

Select the desired user list.

Select the disc type.

Select the files to copy to disc in order.

After copying is complete, click “OK”.

Memo :

The

following types of discs can be used on the provided software Everio MediaBrowser 4. DVD-R DVD-R DL DVD-RW DVD+R DVD+R DL DVD+RW

The following formats are supported by the provided software Everio MediaBrowser 4. AVCHD DVD-Video*

* To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video). For details, refer to the Pixela homepage.

http://www.pixela.co.jp/oem/jvc/mediabrowser/e/

Use commercially-available software to create a Blu-ray disc.

Use

Everio MediaBrowser 4 Player to play back an AVCHD disc. Refer to the help file of the provided Everio MediaBrowser 4 software to operate.

When copying videos recorded in UXP recording mode to create an AVCHD disc, the videos need to be converted to XP recording mode before copying. Therefore, it may take a longer time than copying videos recorded in other modes.

To view the help file of Everio MediaBrowser 4, select “Help” from the Everio MediaBrowser 4’s menu bar or press F1 on the keyboard.

If you encounter any problems with the provided software Everio MediaBrowser 4, please consult the “Pixela User Support Center”.

Click “Settings” to select the disc type.

Click “Select all” to select all the displayed files.

After selecting, click “Next”.

Set the title of the top menu of the disc.

Click “Settings” to select the menu background.

After setting, click “Start”.

Telephone USA and Canada (English): +1-800-458-4029 (toll-free)

Homepage

Europe (UK, Germany, France, and Spain) (English):+800-1532-4865 (toll-free) Other Countries in Europe (English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090

http://www.pixela.co.jp/oem/jvc/mediabrowser/e/

Page 82

To USB Connector

Computer

CONNECT TO PC

TYPE TO CONNECT

SELECT DEVICE

PLAYBACK ON PC

CONNECT TO PC

PLAYBACK ON PC

Click

Copying

Backing Up Files Without Using Provided Software

Copy the files to a computer using the following method.

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Open the terminal cover.

Connect to your PC using the provided USB cable.

Before connecting the cable, close the LCD monitor to turn off this unit.

Open the LCD monitor.

This unit turns on and the “SELECT DEVICE” menu appears.

Tap “CONNECT TO PC”.

(Windows10)

“This PC” in “Windows System”, then click the “JVCCAM_SD” icon

Click of “This PC”. (Windows 8/8.1) Right-click “Computer” in the “Windows System Tool” menu to select the checkbox, and then click the “JVCCAM_SD” icon. (Windows 7) Select “Computer” from the “Start” menu, then click on the “JVCCAM_SD” icon.

Open the folder with the desired files.

“List of Files and Folders” (A p. 83)

Copy the files to any folder in the computer (desktop, etc).

Caution :

When the camera and PC are connected by an USB cable, recorded media are read-only.

Memo :

To edit/view the files, use a software that supports AVCHD (video)/JPEG (still image) files.

The above operations on computer may vary with the system used.

Disconnecting this Unit from Computer

Tap “PLAYBACK ON PC”.

Disconnect the USB cable to return to the recording or playback screen.

Close the Everio MediaBrowser 4 program, if it starts.

The following screen is displayed after the camera operation is completed.

Click “Safely Remove Hardware and Eject Media”.

Click all “JVCCAM~”.

Disconnect the USB cable and close the LCD monitor.

Operations are to be performed on the computer after the screen switches.

Page 83

List of Files and Folders

[JVCCAM_MEM]

[JVCCAM_SD]

[ DCIM ] [ 100JVCSO ]

[ 101JVCSO ] [ 102JVCSO ]

[ AVCHD ]

[ BDMV ]

[ STREA M ] [ BACKUP ] [ CLIPINF ] [ PLAYLIST ] [ INDEX.BDM ] [ MOVIEOBJ.BDM ]

[ EXTMOV ]

[ PRIVATE ]

DEM_0000.MTS MOV_0001.MTS MOV_0002.MTS MOV_0003.MTS

…

[ XXXXX.MTS ]

[ JVC ]

PIC_0001.JPG PIC_0002.JPG PIC_0003.JPG

(Video files with defective management information)

*There may be no demo video file.

(Demo Video File)

(Video File)

Still Image File

(Management Information)

Still Image Folder

(SD Card)

(Built-In Memory)

[ BDMV ]

[ STREA M ] [ BACKUP ] [ CLIPINF ] [ PLAYLIST ] [ INDEX.BDM ] [ MOVIEOBJ.BDM ]

…

[ XXXXX.MTS ]

(Video File)

Folders and files are created in the built-in memory and SD card as shown below. They are created only when necessary.

Copying

Caution :

When the camera and PC are connected by an USB cable, recorded media are read-only.

Page 84

To USB Connector

Computer

CONNECT TO PC

TYPE TO CONNECT

SELECT DEVICE

PLAYBACK ON PC

CONNECT TO PC

PLAYBACK ON PC

Copying

Copying to Mac Computer

Copy the files to a Mac computer using the following method.

Caution :

This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first.

Open the terminal cover.

Connect to your PC using the provided USB cable.

Before connecting the cable, close the LCD monitor to turn off this unit.

Open the LCD monitor.

Load image file to iPhoto.

Edit the video using iMovie.

0 0 0

launches automatically and videos recorded in the camera are

iPhoto displayed. Load the necessary images.

Images on the built-in memory and SD card are displayed separately. Switch between JVCCAM_MEM (built-in memory) and JVCCAM-SD (SD card) displayed under “Devices” in the iPhoto “Source list”.

Videos loaded using iPhoto cannot be edited using iMovie. To edit videos, load the files from iMovie.

Run iMovie and load the necessary videos to iMovie. Videos loaded using iPhoto cannot be imported to iMovie. For details on operating iMovie, refer to the help file of iMovie.

Caution :

Do not remove the cable or turn off this unit before image loading is complete.

When the camera and PC are connected by an USB cable, recorded media are read-only.

MTS files that are copied to a Mac computer cannot be imported to iMovie. To use MTS files with iMovie, import the files using iMovie.

Memo :

To edit/view the files, use a software that supports AVCHD (video) files.

When removing this unit from the computer, drag and drop the “JVCCAM_MEM” or “JVCCAM_SD” icon on the desktop to the trash bin.

Tap “CONNECT TO PC”.

Tap “PLAYBACK ON PC”.

Disconnect the USB cable to return to the recording or playback screen.

The following screen is displayed after the camera operation is completed.

iMovie and iPhoto

You can import files from this unit to a computer using Apple’s iMovie ’8, iMovie ’9, iMovie ’11, iMovie version 10 (video), or iPhoto (still image). For the PC operating system of iMovie and iPhoto, check the information provided by Apple.

For the latest information on iMovie or iPhoto, refer to the Apple website.

For details on how to use iMovie or iPhoto, refer to the help file of the respective softwares.

There is no guarantee that the operations will work with all computer environments.

The “JVCCAM_MEM” or “JVCCAM_SD” icon appears on the desktop.

Page 85

REC

≪PLAY

OFF

TOP MENU

SETUP

CONNECTION

SETTING

RECORD

SETTINGS

RECORD SETTING

Settings Menu

Operating the Menu

The following menu is available on this unit.

TOP MENU: Menu that contains all the items specific to the video recording, modes respectively.

still image recording, video playback, and still image playback

Operating the Top Menu

You can configure various settings using the menu.

Tap “MENU”.

The top menu appears.

The menu differs according to the mode in use.

Tap the desired menu.

Tap the desired setting.

Memo :

To display the previous/next menu

Tap 0 or 1.

To return to the previous screen

Tap J.

To exit the screen

Tap L (quit).

Page 86

Settings Menu

RECORD SETTING Menu (video)

FOCUS

Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 28) *Displayed only in the manual recording mode.

BRIGHTNESS ADJUST

Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 29) *Displayed only in the manual recording mode.

BACKLIGHT COMP.

Corrects the image when the subject appears dark due to backlight. “Setting Backlight Compensation” (A p. 30) *Displayed only in the manual recording mode.

WHITE BALANCE

Adjusts the color according to the light source. “Setting White Balance” (A p. 31) *Displayed only in the manual recording mode.

TELE MACRO

Enables close-up shots when using the telephoto (T) end of the zoom. “Taking Close-up Shots (TELE MACRO)” (A p. 32) *Displayed only in the manual recording mode.

TOUCH PRIORITY AE/AF

Automatically adjusts focus and brightness based on the subjects’ faces or selected area. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p.

39)

DIS

Camera shake during video recording can be effectively reduced. “Reducing Camera Shake” (A p. 40

)

GAIN UP

Makes the subject appear bright automatically when recording in dark places.

Setting Details

OFF Deactivates the function.

ON Electrically brightens the scene when it is dark.

AUTO SLOW-SHUTTER Slows down the shutter speed to brighten the scene when it is dark.

Memo :

Although “AUTO SLOW-SHUTTER” brightens the scene more than “ON”, movements of the subject may become unnatural.

Page 87

Settings Menu

WIND CUT

Reduces the noise caused by wind.

Setting Details

OFF Deactivates the function.

ON Activates the function.

AUTO Activate the function automatically.

SELF-TIMER

Use this function when you wish to include the photographer in the picture or video. “Using the Self-timer in Video Mode” (A p. 43

TIME-LAPSE RECORDING

SELF-CHECK REC/PLAY

After recording for a specified duration, this unit automatically plays back the scene and then repeats the recording process and the playback process over and over again. “Recording at a Fixed Interval and Playing Back Repeatedly” (A p. 45

)

DATE/TIME RECORDING

You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.) “Recording Videos with Date and Time” (A p.

46)

TIME COUNTER RECORDING

You can take a video with a stopwatch recorded. You can start, stop and reset the stopwatch as with any stopwatch. “Recording Videos with Time Counter” (A p. 47

)

RECORDING EFFECT

You can add and record various effects to the images. Once setting is done, you can easily record images that are suitable for each image.

GRAINY MONOCHROME

You can record images with a grainy black and white photo feel. “Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)” (A p. 35

FOOD

You can capture images of the food to make the food look appetizing. “Recording Food Images (FOOD)” (A p. 36)

BABY

You can capture soft images by enhancing the clarity and brightness of skin color. This effect is suitable for capturing images of a baby. “Recording Images of a Baby (BABY)” (A p. 37)

)

SHUTTER MODE

Continuous shooting settings can be adjusted.

Setting Details

RECORD ONE SHOT Records one still image.

CONTINUOUS SHOOTING Records still images continuously while the A button on the LCD screen is tapped.

Memo :

The size of the still image that is captured in the video mode is 1,920 x 1,080.

Some SD cards may not support continuous shooting.

The continuous shooting speed will drop if this function is used repeatedly.

Page 88

Settings Menu

SEAMLESS RECORDING

Continues recording on the SD card without stopping when the remaining space on the built-in memory runs out.

Setting Details

OFF Does not switch recording media automatically.

ON Switches recording media automatically.

Memo :

Seamless recording cannot be performed if there is not enough free space in the SD card.

q appears if seamless recording cannot be performed.

start seamless recording again after the previous session is complete, it is necessary to combine seamless videos, or delete the combination information

of the seamless videos.

“Combining Videos Recorded by Seamless Recording” (A p. 67)

VIDEO QUALITY

Sets the video quality.

Setting Details

UXP Enables recording in the best picture quality.

XP Enables recording in high picture quality.

EP Enables long recordings.

Memo :

Set to “UXP” or “XP” mode when recording fast-moving scenes or scenes with extreme changes of brightness to avoid noise.

Copy videos recorded with the video quality set to “UXP” in blu-ray discs.

ZOOM

Sets the maximum zoom ratio.

Setting Details

40x OPTICAL Enables recording with 1 - 40x optical zoom. Set this when digital zoom is not desired.

60x DYNAMIC Enables recording with 1 - 40x optical zoom and 41 - 60x digital zoom.

120x DIGITAL Enables recording with 1 - 40x optical zoom and 41 - 120x digital zoom.

200x DIGITAL Enables recording with 1 - 40x optical zoom and 41 - 200x digital zoom.

Memo :

When digital zoom is used, the image becomes grainy as it is digitally enlarged.

The angle of view changes when the image stabilizer is turned on or off.

ZOOM MIC

Sets the zoom microphone.

Setting Details

OFF Deactivates the zoom microphone.

ON Records audio sounds in the same direction as the zoom operation.

Memo :

When “ON” is selected, the volume of the wide angle (W) end is lower than the telephoto (T) end.

Page 89

MIC LEVEL

Make the adjustments such that “MIC LEVEL” does not turn red.

Setting Details

OFF Hides display of microphone input level.

ON Shows display of microphone input level.

MIC LEVEL SETTING

Sets the microphone level. Make the adjustments such that “MIC LEVEL” does not turn red.

Setting Details

+1 Increases the microphone input level.

0 The microphone input level is not changed.

-1 Decreases the microphone input level.

K2 TECHNOLOGY

Reduces the degradation of sound quality caused by digital signal processing, and records a sound quality close to the original.

Settings Menu

Setting Details

OFF Deactivates K2 TECHNOLOGY.

ON Activates K2 TECHNOLOGY.

SCREEN LOCK

When shooting under water, lock the touch screen to prevent operation errors. “Locking the Screen (when Shooting Underwater)” (A p. 10)

Page 90

Settings Menu

LCD CLOSED RECORDING

This unit does not turn off even when the LCD monitor is closed during recording.

Setting Details

OFF The unit is turned off when the LCD monitor is closed.

ON Activates LCD CLOSED RECORDING.

Memo :

If “LCD CLOSED RECORDING” is set to “ON”, stop the recording before turning off the unit.

When

“LCD CLOSED RECORDING” set to “ON” and recording is in progress with the LCD monitor closed (or LCD monitor reversed), the zoom lever and

the START/STOP button cannot be operated.

Page 91

RECORD SETTING Menu (still image)

FOCUS

Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 28) *Displayed only in the manual recording mode.

BRIGHTNESS ADJUST

Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 29) *Displayed only in the manual recording mode.

BACKLIGHT COMP.

Corrects the image when the subject appears dark due to backlight. “Setting Backlight Compensation” (A p. 30) *Displayed only in the manual recording mode.

WHITE BALANCE

Adjusts the color according to the light source. “Setting White Balance” (A p. 31) *Displayed only in the manual recording mode.

Settings Menu

TELE MACRO

Enables close-up shots when using the telephoto (T) end of the zoom. “Taking Close-up Shots (TELE MACRO)” (A p. 32) *Displayed only in the manual recording mode.

TOUCH PRIORITY AE/AF

Automatically adjusts focus and brightness based on the subjects’ faces or selected area. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p.

39)

SELF-TIMER

Use this when taking a group photo. “Using the Self-timer” (A p. 43

)

GAIN UP

Makes the subject appear bright automatically when recording in dark places.

Setting Details

OFF Deactivates the function.

ON Electrically brightens the scene when it is dark.

Memo :

Setting can be adjusted separately for videos.

“GAIN UP (Video)” (A p. 86)

Page 92

Settings Menu

RECORDING EFFECT

You can add and record various effects to the images. Once setting is done, you can easily record images that are suitable for each image.

GRAINY MONOCHROME

You can record images with a grainy black and white photo feel. “Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)” (A p. 35)

FOOD

You can capture images of the food to make the food look appetizing. “Recording Food Images (FOOD)” (A p. 36

BABY

You can capture soft images by enhancing the clarity and brightness of skin color. This effect is suitable for capturing images of a baby. “Recording Images of a Baby (BABY)” (A p. 37)

SHUTTER MODE

Continuous shooting settings can be adjusted.

Setting Details

RECORD ONE SHOT Records one still image.

)

CONTINUOUS SHOOTING Records still images continuously while the START/STOP button is pressed.

Records still images continuously while the START/STOP button is pressed, or while the A button on the LCD screen is tapped.

Memo :

Some SD cards may not support continuous shooting.

The continuous shooting speed will drop if this function is used repeatedly.

IMAGE SIZE

Sets the image size (number of pixels) for still images.

Setting Details

1920X1080(2M) Takes still images with aspect ratio 16:9.

The sides of still images recorded in 16:9 aspect ratio may be cut off when printed.

3680X2760(10M) 1440X1080(1.5M) 640X480(0.3M)

*12 Megapixel Still Picture by Ultra Resolution Technology

Takes still images with aspect ratio 4:3.

SCREEN LOCK

When shooting under water, lock the touch screen to prevent operation errors. “Locking the Screen (when Shooting Underwater)” (A p. 10

)

Page 93

PLAYBACK SETTING Menu (video)

DISPLAY DATE/TIME

Sets whether to display the recording date and time during video playback.

Setting Details

OFF Does not display the date and time during playback.

ON Displays the date and time during playback.

TIME COUNTER PLAYBACK

A time counter that can be reset can be displayed during playback. “TIME COUNTER PLAYBACK” (A p. 54)

SLOW-MOTION SPEED

For specifying the playback speed of slow playback.

Setting Details

Settings Menu

1/2 Sets the speed of slow playback to 1/2 normal playback speed.

1/4 Sets the speed of slow playback to 1/4 normal playback speed.

1/8 Sets the speed of slow playback to 1/8 normal playback speed.

DIGEST PLAYBACK

Plays back a digest of the recorded videos. “ DIGEST PLAYBACK ” (A p. 55)

PLAYBACK OTHER FILE

Plays videos with defective management information. “ PLAYBACK OTHER FILE ” (A p. 56)

Page 94

Settings Menu

EDIT Menu (video)

PROTECT/CANCEL

Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 64) “Protecting/Releasing Protection of Selected Files” (A p. 65)

COPY

Copies files from the built-in memory to the SD card. “Copying Files to an SD Card” (A p. 70

TRIMMING

Select the required part of a video and save it as a new video file. The original video remains in its existing location. “Capturing a Required Part in the Video (TRIMMING)” (A p. 68)

SEAMLESS REC CTRL

Videos that are recorded on two separate media and with “SEAMLESS RECORDING” in the video recording menu enabled can be combined into a single video. “Combining Videos Recorded by Seamless Recording” (A p. 67)

)

Page 95

PLAYBACK SETTING Menu (still image)

SLIDE SHOW EFFECTS

Sets the transition effects in slideshow playback.

Setting Details

SLIDE Switches the screen by sliding in from right to left.

BLINDS Switches the screen by dividing into vertical strips.

CHECKERBOARD Switches the screen by changing through a checkered pattern.

RANDOM Switches the screen with a random effect from SLIDE, “BLINDS”, and “CHECKERBOARD”.

Memo :

Slideshow effects are not available when playing back still images in external devices (such as USB external hard disk drives).

Settings Menu

Page 96

Settings Menu

EDIT Menu (still image)

PROTECT/CANCEL

Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 64) “Protecting/Releasing Protection of Selected Files” (A p. 65)

COPY

Copies files from the built-in memory to the SD card. “Copying Files to an SD Card” (A p. 70

)

Page 97

URL:

MOBILE USER GUIDE

Settings Menu

SETUP (video/still image)

Mobile User Guide

Displays the QR code to access the Mobile User Guide.

The portal site appears when the QR code has been read correctly. Select the model name of your camera to display its Mobile User Guide.

Memo :

To read the QR code, a relevant application is required. Enter the URL in the internet browser manually if the QR code cannot be read.

The

Mobile User Guide is supported by Android devices and iPhone. You can view it on standard browsers such as Google Chrome (Android) and Mobile

Safari (iPhone).

QR Code is a registered trademark of Denso Wave Incorporated.

DATE & TIME

Resets the current time or sets to the local time when using this unit overseas. “Clock Setting” (A p. 15) “Setting the Clock to Local Time when Traveling” (A p. 18 “Setting Daylight Saving Time” (A p. 19)

)

DATE DISPLAY STYLE

Sets the order of year, month, day and the time display format (24H/12H).

Sorting Order Time Display

year.month.day 12h

month.day.year 24h

day.month.year -

LANGUAGE

The language on the display can be changed. “Changing the Display Language” (A p. 16

)

Page 98

Settings Menu

MONITOR BRIGHTNESS

Sets the brightness of the LCD monitor.

Setting Details

AUTO Sets the brightness automatically to “4” when using outdoors and to “3” when using indoors.

4 Brightens the backlight of the monitor regardless of the surrounding conditions.

3 Sets to the standard brightness.

2 Darkens the backlight of the monitor regardless of the surrounding conditions.

1 Sets to dim brightness.

Helps to save battery life when selected.

OPERATION SOUND

Turns on or off the operation sound.

Setting Details

OFF Turns off the operation sound.

ON Turns on the operation sound.

AUTO POWER OFF

When no operation is made for 5 minutes, this function turns off this unit or sets this unit to standby mode when using the AC adapter in case you forgot to turn off the power.

Setting Details

OFF Power is not turned off even if this unit is not operated for 5 minutes.

ON Turns off the power automatically if this unit is not operated for 5 minutes.

Memo :

Turns off the power automatically if this unit is not operated for 5 minutes.

When using the AC adapter, this unit goes into standby mode.

DEMO MODE

Plays a demonstration of the special features of this unit.

Setting Details

OFF Deactivates the function.

ON Plays a demonstration of the special features of this unit.

Memo :

This mode is not available in the playback mode.

TOUCH SCREEN ADJUST

Adjusts the response position of the buttons on the touch screen. “Adjusting the Touch Screen” (A p. 11)

REC MEDIA FOR VIDEO

Sets the recording/playback media of videos.

Setting Details

I BUILT-IN MEMORY Records videos to this unit's built-in memory.

G SD CARD Records videos to the SD card.

Page 99

REC MEDIA FOR IMAGE

Sets the recording/playback media of still images.

Setting Details

I BUILT-IN MEMORY Records still images to this unit’s built-in memory.

G SD CARD Records still images to the SD card.

FORMAT BUILT-IN MEM.

Deletes all files on the built-in memory.

Setting Details

FILE Deletes all files on the built-in memory.

Settings Menu

FILE + MANAGEMENT NO Deletes all files on the built-in memory and resets the folder and file numbers to "1".

(File number of the AVCHD video file starts from “0”.)

Caution :

All data on the built-in memory will be deleted when it is formatted. Copy all files on the built-in memory to a computer before formatting.

Make sure that the battery pack is fully charged or connect the AC adapter as the formatting process may take some time.

FORMAT SD CARD

Deletes all files on the SD card.

Setting Details

FILE Deletes all files on the SD card.

FILE + MANAGEMENT NO Deletes all files on the SD card and resets the folder and file numbers to "1".

Caution :

Not available for selection when no SD card is inserted.

All data on the SD card will be deleted when it is formatted. Copy all files on the SD card to a computer before formatting.

Make sure that the battery pack is fully charged or connect the AC adapter as the formatting process may take some time.

FACTORY PRESET

Returns all the settings to their default values.

FIRMWARE UPDATE

Updates the functions of this unit to the latest version. For details, refer to the JVC homepage. (When no program to update the software of this unit is available, nothing will be provided on the homepage.)

http://www3.jvckenwood.com/english/support/index.html

OPEN SOURCE LICENSES (recording only)

Displays the open source software licenses that are used in this unit.

Page 100

Settings Menu

CONNECTION SETTINGS (video/still image)

DISPLAY ON TV

Displays icons and date/time on a TV screen.

Setting Details

OFF Does not display icons and date/time on TV.

ON Displays icons and date/time on TV.

VIDEO OUTPUT

Sets the aspect ratio (16:9 or 4:3) according to the connecting TV.

Setting Details

4:3 Select this when connecting to a conventional TV (4:3).

16:9 Select this when connecting to a widescreen TV (16:9).

HDMI OUTPUT

Sets the output from the HDMI connector of this unit when it is connected to a TV.

Setting Details

AUTO It is recommended to select “AUTO” usually.

576p Select this when the video is not output in “AUTO” correctly.

HDMI CONTROL

Sets whether to link operations with an HDMI-CEC compliant TV.

Setting Details

OFF Turns off linked operations.

ON Turns on linked operations.

100