How it Works
JVC
Loading...
Everio GZ-VX755
Detailed User Manual
222 pgs13.16 Mb0

JVC Everio GZ-VX755, Everio GZ-VX775, GZ-VX715 Detailed User Manual

CAMCORDER
LYT2463-050A
Detailed User Guide
GZ-VX755/GZ-VX775
Table of Contents
Beginner’s Guide ........................................................... 5
Using Wi-Fi
Image Monitoring via Direct Connection (DIRECT
MONITORING) .................................................................. 13
Image Monitoring via an Access Point at Home (OUTSIDE
MONITORING) .................................................................. 17
Image Monitoring via the Internet (OUTSIDE MONITORING)
............................................................................................ 19
Send Still Images via E-mail upon Detection of Face or Movement
(DETECT/MAIL SETTING) ................................................ 23
Setting the Password (OUT MONITORING SET) .............. 28
Setting the UPnP of this Camera (OUT MONITORING SET)
........................................................................................ 28
Obtaining a Dynamic DNS (DDNS) Account ...................... 29
Setting Dynamic DNS (DDNS) on this Camera (OUT
MONITORING SET) ....................................................... 29
Setting the Sender’s E-mail Address .................................. 30
Registering the Recipient’s E-mail Address ....................... 33
Setting the Detection Method of this Camera (DETECT/MAIL
SETTING) ....................................................................... 34
Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING) ....................................................................... 35
Setting Self Recording on this Camera (DETECT/MAIL
SETTING) ....................................................................... 35
Registering the Access Points to Connect (“ACCESS POINTS”
) ...................................................................................... 36
Setting the Password (DIRECT MONITORING) ................. 40
Setting the Enforced Group Owner (DIRECT MONITORING)
........................................................................................ 41
Checking the MAC Address of this Camera ....................... 42
Protecting the Network Settings with a Password .............. 42
Initializing the Network Settings ......................................... 43
Indications on the Screen ................................................... 44
Transferring Videos ............................................................ 45
Transferring Still Images .................................................... 46
Changing the Settings ........................................................ 48
Indications on the Screen ................................................... 50
Making Camera Settings from a Web Browser .................. 52
Getting Started
Attaching the Core Filter ..................................................... 65
Using as a Hand Strap ....................................................... 67
Types of Usable SD Card ................................................... 68
Names of Buttons and Functions on the LCD Monitor ....... 70
Resetting the Clock ............................................................ 72
Charging the Battery Pack Overseas ................................. 74
Setting the Clock to Local Time when Traveling ................. 74
Setting Daylight Saving Time ............................................. 75
Recording
Zooming ............................................................................. 78
Capturing Still Images During Video Recording ................. 78
Zooming ............................................................................. 82
Shooting According to Scene (Subject) ............................. 83
Adjusting Focus Manually .................................................. 85
Adjusting Brightness .......................................................... 86
Setting Shutter Speed ........................................................ 87
Setting Aperture ................................................................. 88
Setting White Balance ........................................................ 89
Setting Backlight Compensation ........................................ 90
Taking Close-up Shots ....................................................... 91
Recording with Animation Effects ...................................... 92
Recording with Face Decorations ...................................... 95
Recording with Decorative Stamps .................................... 96
Recording with Personal Handwriting ................................ 97
Capturing Smiles Automatically (SMILE SHOT) ................. 99
Capturing Pets Automatically (PET SHOT) ...................... 100
Recording while Displaying a Magnified View of a Selected
Face (FACE SUB-WINDOW) ....................................... 101
Registering Human Face Personal Authentication Information
.......................................................................................... 103
Setting SMILE%/NAME DISPLAY .................................... 105
Editing the Registered Face Information .......................... 106
Recording Automatically by Sensing Movements (AUTO REC)
.......................................................................................... 110
Playback
Checking the Recording Date and Other Information ....... 119
Checking the Content of Videos Quickly (Digest Playback)
...................................................................................... 119
Playing a Video with Defective Management Information . 120
Slideshow Playback ......................................................... 122
Connecting via the HDMI Mini Connector ........................ 124
Connecting via the AV Connector .................................... 125
Digest Playback on a Blu-ray or DVD Player .................... 126
Editing
Deleting the Currently Displayed File ............................... 127
Deleting Selected Files .................................................... 127
2
Protecting/Releasing Protection of the Currently Displayed
File ................................................................................ 128
Protecting/Releasing Protection of Selected Files ............ 129
Creating Playlists with Selected Files ............................... 134
Creating Playlists by Date ................................................ 135
Editing Playlists ................................................................ 136
Deleting Playlists .............................................................. 137
Copying
Preparing a DVD Writer (CU-VD3) ................................... 139
Preparing a DVD Writer (CU-VD50) ................................. 139
Creating a Disc ................................................................. 140
Playing Back with a DVD Writer ....................................... 145
Preparing a BD Writer (External Blu-ray Drive) ................ 146
Creating a Disc ................................................................. 147
Playing Back with a BD Writer (External Blu-ray Drive) .... 153
Preparing a USB External Hard Disk Drive ....................... 155
Copying All Files .............................................................. 156
Playing Back Files in the USB External Hard Disk Drive .. 157
Deleting Folders in the USB External Hard Disk Drive ..... 157
Formatting the USB External Hard Disk Drive .................. 158
Importing Files from the USB External Hard Disk Drive .... 158
Verifying System Requirements (Guideline) ..................... 162
Installing the Provided Software ....................................... 163
Backing Up All Files ......................................................... 164
Organizing Files ............................................................... 165
Recording Videos to Discs ............................................... 166
Backing Up Files Without Using Provided Software ......... 167
List of Files and Folders ................................................... 169
Menu Settings
Operating the Shortcut Menu ........................................... 171
Operating the Main Menu ................................................. 172
Operating the Common Menu .......................................... 172
INFO. ............................................................................... 176
SCENE SELECT .............................................................. 176
FOCUS ............................................................................ 176
BRIGHTNESS ADJUST ................................................... 176
SHUTTER SPEED ........................................................... 176
APERTURE PRIORITY .................................................... 176
WHITE BALANCE ............................................................ 176
BACKLIGHT COMP. ........................................................ 176
TELE MACRO .................................................................. 176
TOUCH PRIORITY AE/AF ............................................... 176
LIGHT .............................................................................. 176
GAIN UP .......................................................................... 177
WIND CUT ....................................................................... 177
ANIMATION EFFECT ...................................................... 178
DECORATE FACE EFFECT ............................................ 178
STAMP ............................................................................ 178
HANDWRITING EFFECT ................................................ 178
HIGH SPEED RECORDING ............................................ 178
TIME-LAPSE RECORDING ............................................. 178
AUTO REC ...................................................................... 178
Wi-Fi ................................................................................ 178
DATE/TIME RECORDING ............................................... 178
FACE SUB-WINDOW ...................................................... 178
SHUTTER MODE ............................................................ 178
SMILE SHOT ................................................................... 179
SMILE%/NAME DISPLAY ................................................ 179
FACE REGISTRATION .................................................... 179
PET SHOT ....................................................................... 179
VIDEO QUALITY .............................................................. 179
ZOOM .............................................................................. 180
SEAMLESS RECORDING ............................................... 181
x.v.Color ........................................................................... 181
ZOOM MIC ...................................................................... 182
SCENE SELECT .............................................................. 185
FOCUS ............................................................................ 185
BRIGHTNESS ADJUST ................................................... 185
SHUTTER SPEED ........................................................... 185
APERTURE PRIORITY .................................................... 185
WHITE BALANCE ............................................................ 185
BACKLIGHT COMP. ........................................................ 185
TELE MACRO .................................................................. 185
TOUCH PRIORITY AE/AF ............................................... 185
LIGHT .............................................................................. 185
SELF-TIMER .................................................................... 186
GAIN UP .......................................................................... 186
AUTO REC ...................................................................... 186
SHUTTER MODE ............................................................ 187
CONT. SHOOTING SPEED ............................................. 187
SMILE SHOT ................................................................... 188
SMILE%/NAME DISPLAY ................................................ 188
FACE REGISTRATION .................................................... 188
PET SHOT ....................................................................... 188
IMAGE SIZE ..................................................................... 188
FILE INFORMATION ....................................................... 191
SEARCH DATE ................................................................ 191
DISPLAY DATE/TIME ...................................................... 191
DIGEST PLAYBACK ........................................................ 192
PLAYBACK PLAYLIST .................................................... 192
EDIT PLAYLIST ............................................................... 192
PROTECT/CANCEL ........................................................ 192
COPY ............................................................................... 192
MOVE .............................................................................. 192
TRIMMING ....................................................................... 192
UPLOAD SETTINGS ....................................................... 192
PLAYBACK OTHER FILE ................................................ 192
SEAMLESS REC CTRL ................................................... 192
K2 TECHNOLOGY .......................................................... 192
FILE INFORMATION ....................................................... 193
SEARCH DATE ................................................................ 193
SLIDE SHOW EFFECTS ................................................. 194
PROTECT/CANCEL ........................................................ 194
COPY ............................................................................... 194
MOVE .............................................................................. 194
CLOCK ADJUST .............................................................. 197
DATE DISPLAY STYLE ................................................... 197
LANGUAGE ..................................................................... 197
MONITOR BRIGHTNESS ................................................ 197
REC MEDIA FOR VIDEO ................................................. 198
REC MEDIA FOR IMAGE ................................................ 198
OPERATION SOUND ...................................................... 199
SILENT MODE ................................................................. 199
AUTO POWER OFF ......................................................... 200
QUICK RESTART ............................................................ 200
DEMO MODE .................................................................. 201
TOUCH SCREEN ADJUST ............................................. 201
DISPLAY ON TV .............................................................. 202
VIDEO OUTPUT .............................................................. 203
HDMI OUTPUT ................................................................ 203
3
HDMI CONTROL ............................................................. 204
FACTORY PRESET ......................................................... 204
UPDATE .......................................................................... 204
PC SOFTWARE UPDATE ............................................... 204
FORMAT BUILT-IN MEM. ................................................ 205
FORMAT SD CARD ......................................................... 205
ERASE ALL DATA ........................................................... 206
OPEN SOURCE LICENSES ............................................ 206
Names of Parts
Indications on the LCD monitor
Common Recording Indications .......................................... 210
Video Recording .................................................................. 210
Still Image Recording ........................................................... 211
Video Playback .................................................................... 211
Still Image Playback ............................................................ 212
Troubleshooting
Maintenance
Specifications
4
Charging
0
Refer to the operating instructions found in the animation on the Detailed User Guide.
Recording
0
Refer to the operating instructions found in the animation on the Detailed User Guide.
Playback
0
Refer to the operating instructions found in the animation on the Detailed User Guide.
Shooting Tips
Basic Way to Hold a Camcorder ~ Recording Stable Images ~
.
This is the standard way of shooting while standing up. Be sure to master this basic technique in order to achieve stable images.
o
[Getting Ready]
A Open your feet to the width of your shoulders. B Keep the elbow of your right arm, which is holding the camcorder, close
to your side.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Extending Your Hands to Shoot ~ High-Angle Shooting ~
.
Extend your hand when your subject is being hidden behind a crowd of people.
o
[Getting Ready]
A Open your feet to the width of your shoulders. B Extend your right hand and hold the camcorder over your head. C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Caution :
0
Use this way of shooting only as a last resort as it is difficult to achieve stable images.
0
Set to the wide angle as much as possible as the image will be prone to camera shake.
0
Be considerate. Do not inconvenience the people around you.
Squatting and Shooting at Eye Level
.
Staying low is a common position to take when shooting small children. By recording from the eye level of the child, you can capture all his cute expressions clearly.
o
[Getting Ready]
A Kneel down with your left knee while keeping your right foot on the
ground.
B Place the elbow of your right arm, which is holding the camcorder, on
your right knee.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Panning
0
Refer to the operating instructions found in the animation on the Detailed User Guide.
Use this method to shoot a wide angle of view.
o
[Getting Ready]
A Shoot by rotating your body instead of moving your arms while keeping
the basic way of holding a camcorder as stated above.
B Stand facing the direction where the rotation will stop. C Twist your upper body to the direction where recording will start. D Press the start button and record for 2 seconds, then slowly twist back
your body to face the front. Record for another 2 seconds while facing the front, then press the stop button. (The 90 degrees rotation should take about 5 seconds, giving the feeling of a slow motion.)
Beginner’s Guide
5
Holiday Season/Christmas
Record the happy Christmas celebration with your family!
.
Decorating the Tree and Preparing the Dinner
The decoration of tree and preparation of dinner are part of the joy of Christmas. Be sure to record these happy family times!
o
Decorating the tree
.
A tree is the most important thing to bring out the mood of Christmas. Simply the scene of all family members engaging in the decorating of a fir tree with various colorful ornaments is full of the feeling of happiness.
o
Preparing the Dinner
.
Record the scenes as everyone helps to prepare the feast of the night. You can film the mother who is cooking, the children who are helping, and of course, the process of making a cake!
Recording the Christmas Party
.
After all preparations, it is finally the Christmas party itself. Not only should you record the candle-blowing scene, but also the smiles of the family while being surrounded by good food, or even the father who is slightly drunk from champagne!
Finding the Presents
.
For children, the greatest joy of Christmas is receiving presents the next morning. Their expression of delight when finding a present next to their pillow is a recording opportunity not to be missed. Get ready to shoot before the children wake up!
Useful Shooting Techniques
6
Wedding
Create an awesome wedding video for the bride and groom!
.
Discussing and Planning Before the Event
Before the day of the wedding reception, it is important to discuss with the bride and groom about various details such as the order of the ceremony and whether there are any entertainment programs or change of clothes. By understanding the preferences of the bride and groom, you will be able to shoot more appropriately.
o
Finding out the route of entrance
.
The highlight of a wedding reception is the entrance of the bride and groom. Find out which door they will enter from and the route they will take from the
person-in-charge of the wedding hall in advance. Set up the tripod at a place where you can follow the couple using zoom without having to move around.
o
Number of times and timing of clothes-changing
Find out the timing of any changing of clothes so as to capture the scene well when the bride and groom enter again. You can also make use the time while the bride and groom are changing to record comments of well wishes from the guests.
Finding the Right Angle to Capture Both Bride and Groom
o
Composing the picture with the guests in front and the bride and groom at the back
.
The main characters of a wedding are of course the bride and groom. Record their expressions clearly during the toast, speech, entertainment programs, and other scenes. Another recommendation is to capture the face shots of the guests, then pan towards the groom. Picture composition containing the crowd of guests only lacks fun, so be sure to pay attention to the shooting angle and size.
Recording the Expressions and Comments of Guests
o
Setting the shot from eye level to chest level
.
You can record comments from the guest by going around asking, "Please say a few words for the bride and groom". This can be done at the guests' waiting room, when the bride and groom are changing, or during the entertainment programs.
Useful Shooting Techniques
7
Advanced Operation with Two Camcorders
If video-editing is to be done, record using two camcorders so that a video with varying scenes can be created. You can try asking a close friend who has a camcorder at home. Set the borrowed camcorder on a tripod to focus on taking close-up shots of the bride and groom. In this way, the other camcorder can be moved around to record other scenes, enabling an interesting video with changing scenes to be created through editing and compilation. As most people own at least a digital camera nowadays, even if you are really unable to find an extra camcorder, inserting still pictures to the video at various points is also a good way to add variety. Do give it a try!
o
<Camcorder 1> Closing up on the bride and groom all the time
.
o
<Camcorder 2> Recording the congratulatory messages from friends at the same time
.
Travel
Capture all the good times of your domestic or overseas trips!
.
Bringing the Necessary Equipment
The necessary things to bring on a trip depends on your traveling purpose and the destination. For overseas trips in particular, you have to think about what to bring in accordance to the local conditions. Here are some suggestions for your consideration.
o
Camcorder
Think about how many hours of shooting you will usually perform in a day. Be sure to prepare enough recording medium especially for long overseas trips. If you are recording in SD cards, get ready the sufficient number of cards, including some for backup.
o
Battery Pack
Prepare a battery pack that is ready for double the expected recording time in a day. For example, if you plan to record for 2 hours a day, prepare a battery pack that is ready for 4 hours (actual recording time). For a day trip, you can prepare a battery with low capacity but for a long trip, do prepare a few batteries with high capacities.
o
AC Adapter
The JVC AC adapter supports voltages from 110 V to 240 V, and hence can be used anywhere in the world. Bring along the adapter if you are traveling for a long time. Charge the battery pack while sleeping so that you can record with full battery power the next day.
o
Power Plug Adapter
.
The shape of the power plug varies according to countries. Be sure to check the shape of the power plug beforehand, and bring the appropriate power plug adapter. “Charging the Battery Pack Overseas” (A p. 74)
Useful Shooting Techniques
8
o
Tripod
.
A tripod is an essential item to take stable images. Select an appropriate tripod in accordance to your purpose and style of traveling, such as a compact one to be used on a table or one that is at least 1 m tall.
Recording the Excitement Before Departure
It may be a little abrupt to start your travel video at the destination suddenly. Record also the preparations prior to departure if it is a family trip, or the time
when everyone is gathered at the meeting place if you are traveling with your friends. For overseas trips, taking a shot of the signs and displays at the airport of the flight you are taking may be useful for future reference.
.
.
Using Pan at the Places of Interest
Tourists spots with beautiful scenery or historical sites are places that you would certainly want to record. To capture the magnificence of a scene which cannot be fitted into a single frame, try the panning technique. Refer to “Shooting Tips” found in the “Beginner’s Guide” on this website on how to use panning effectively. In addition, you may also like to take a shot of the signs or monuments that can often be found at the tourist spots.
.
.
Showing Everyone Having a Good Time
When taking a video, it is rather dull to shoot only the scenery or historical sites. Talk about your feelings while recording the breath-taking scenery of an attraction so that it will be an interesting scene to view later.
Useful Shooting Techniques
9
Amusement Park
Take more shots of the smiling faces of everyone in the family!
.
Taking Videos or Still Images According to the Attraction
You may choose to take videos all the time. However, you may want to take some still images too. The following section explains the scenarios suitable for taking videos or still images.
o
Scenarios suitable for taking videos
.
Scenarios with changes in body movement are suitable for taking videos. This includes situations where there are rapid changes in facial expressions or voices of surprise and delight. *Some amusement parks do not allow passengers to perform any recording. Be sure to check beforehand. [Examples]
0
Merry-go-round, go kart, coffee cup, etc.
o
Scenarios suitable for taking still images (photos)
.
Scenarios with little movement of the subject are suitable for taking still images. Try to take the still images from an angle such that the surroundings can be seen clearly. [Examples]
0
Carousal, ferris wheel, fun bicycle rides, etc.
Inducing Responses by Calling Out
.
Videos with no waving of hands nor laughter are not only dull when you view them later, but also put the capability of the audio-recording function of the camcorder to a waste. When recording, induce more reactions by enthusiastically waving your hands or shouting out "Is it fun?" and the like.
Capturing the Best Moment in a Video as a Still Image
.
Shots with the eyes closed are often taken by accident. To reduce such mistakes, make use of the function to capture still images from videos. As videos are actually continuous recording of 50 still images within 1 minute, using this function allows you to select the best moment and save it as a still image. “Capturing a Still Image in the Video During Playback” (A p. 130)
Advanced Operation with Backlight Compensation
When the subject’s face is in backlight or when the expression cannot be seen clearly, the Intelligent Auto function of this unit automatically increases its brightness for recording. If Intelligent Auto fails to function as expected or if the brightness correction is insufficient, you can increase the brightness by using backlight compensation in the Manual mode. “Setting Details” (A p. 90)
o
<Without backlight compensation>
.
o
<With backlight compensation>
.
Useful Shooting Techniques
10
Wi-Fi Capabilities
This unit is equipped with Wi-Fi function. You can do the following using a smartphone or computer via wireless connection.
Name of Function Capability
Direct Monitoring
0
You can check the image on the camera via direct 1-to-1 connection (Wi-Fi Direct) with a smartphone (or computer), without the need for an access point (wireless LAN router). Recording of videos and still images may be performed while monitoring.
“Image Monitoring via Direct Connection (DIRECT MONITORING)” (A p. 13)
GPS Recording
0
You can record the location information of the venue where recording is taking place via direct connection (Wi-Fi Direct) with a smartphone. The recorded location information can be used on the Everio MediaBrowser 4 software provided with this unit.
“Recording the Location Information” (A p. 16)
Outside Monitoring
0
You can check the image on the camera with a smartphone (or computer) via an access point at home using wireless LAN router. Recording of videos and still images may be performed while monitoring.
“Image Monitoring via an Access Point at Home (OUTSIDE MONITORING)” (A p. 17)
0
You can check the image on the camera via internet connection with a smartphone (or computer) while you are outside. Recording of videos and still images may be performed while monitoring.
“Image Monitoring via the Internet (OUTSIDE MONITORING)” (A p. 19)
Notification Mail
0
A still image is automatically captured and sent via e-mail when faces or movements are detected by the camera. You can also set to record videos on the camera during detection.
“Send Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL SETTING)” (A p. 23)
Video Mail
0
Videos of up to 15 seconds can be recorded and sent via e-mail.
“Record and Send Videos via E-mail (VIDEO MAIL ATTN.)” (A p. 24)
Video Transmission ・ Still Image Transmission
0
You can transfer recorded videos or still images using smartphone applications (or computer browsers).
Terms Used in this Guide：
0
In this guide, operations on the touch panel are described as “tap”.
0
While the names of the buttons on a smartphone are written as “MENU” or “RETURN”, they may vary according to the smartphone in use.
Refer also to the instruction manual of your smartphone.
Using Wi-Fi
11
Operating Environment
To use the smartphone application “Everio sync.”, it is necessary to meet the following requirements.
Android Smartphone
A OS: Android2.1 or higher
(This unit is not guaranteed to operate with all models.)
B Supports GPS function (for GPS recording) C Able to connect to the internet or “Android Market™” (required for
software installation)
iPhone/iPad/iPod touch
A OS: iOS4.3.5 or higher
(This unit is not guaranteed to operate with all models.)
B Able to connect to the internet or “App Store™” (required for software
installation)
Computer
To check the image on the camera from a computer browser and to transfer videos/still images, it is necessary to meet the following requirements.
A OS: Windows 7 B Supports wireless LAN or wired LAN
(For direct connections between the camera and computer, support for wireless LAN is required.)
C Installation of Windows Media Player 12 or later
0
Confirmed operating environment: Internet Explorer 9 or later
Caution :
0
There is no guarantee that the operations will work with all computer environments. For example, the video download feature of mobile safari browser, etc. is not supported.
Precautions on Using Wi-Fi
Cautions on Wi-Fi Function
0
Operation is not guaranteed on all devices.
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days of continuous usage.
0
Communication may not be carried out properly near radio equipment or broadcasting stations. In this case, change the location accordingly.
0
Radio wave interference by Bluetooth devices Bluetooth devices make use of the same frequency bandwidth (2.4 GHz) as that of Wi-Fi devices. Using this product near such devices may cause radio wave interference, and result in a drop in communication speed or connection failure. In this case, turn off the power of devices that are not in use.
0
Security of Wireless LAN An advantage of wireless LAN is that instead of using a LAN cable, it transmits information using radio waves, thus enabling LAN connection to be established within the area covered by the radio waves. However, as radio waves penetrate through objects (such as walls) within the range that they cover, security issues, such as interception of transmission or illegal access, may arise if security settings are not configured. Before you connect to the network in a wireless LAN environment, read through the instruction manual for the wireless LAN device in use, and configure the security settings accordingly. Failure to do so may increase the risk of personal information being intercepted, such as user names, passwords, and the content of your mails, or illegal access to the network.
0
Due to the design of wireless LAN, note that security may be breached by unusual or unforeseeable means.
0
For more details on wireless LAN and network security, please consult the manufacturer of your wireless LAN device.
0
JVC shall not be liable for any security issues, troubles, damages or losses arising from the use of this feature.
Radio Waves Used by this Product
This product makes use of radio waves in the ISM band (2.4 GHz). Although a radio station license is not required for using this product, please take note of the following.
o
Do not use this product near the following places.
0
Industrial, scientific, or medical equipment, such as microwave ovens and pacemakers
0
Specified low-power radio stations (radio station license not required)
0
Bluetooth devices
Equipment such as the above mentioned devices makes use of the same frequency bandwidth as that of Wi-Fi. Using this product near the above equipment may cause radio wave interference, and result in communication failure or a drop in communication speed.
o
Avoid using this product near a TV or radio set.
TV or radio sets make use of a radio wave frequency bandwidth that is different from that of Wi-Fi, and therefore has no effect on communication by this product or the TV/radio set. However, when a TV/radio set is placed close to a Wi-Fi product, electromagnetic waves emitted by the Wi-Fi product may cause noise to occur in the sound or images of the TV/radio.
o
Radio signals are unable to penetrate through reinforced steel, metal, or concrete.
The radio waves used by this product are unable to penetrate through reinforced steel, metal, or concrete materials. It may difficult for communication to be established if two rooms or floors are separated by these materials. *Communication may also get weaker when there are human subjects or parts of the body in between the Wi-Fi devices.
o
Do not connect to wireless networks that you do not have authorization for.
Once connected, it may be considered as unauthorized access and legal actions can be taken against you.
Using Wi-Fi
12
o
Do not use the Wi-Fi function outside the country of purchase.
Depending on the country, there may be restrictions on the use of radio waves and any violations could be punishable by law.
Exporting/Bringing the Unit Overseas
Permission from the U.S. government may be required when bringing the unit to an export controlled country set by the U.S. government (such as Cuba, Iraq, North Korea, Iran, Rwanda, and Syria. As of November, 2011). For more information, consult the U.S. Embassy Commercial Service.
Image Monitoring via Direct Connection (DIRECT MONITORING)
You can check the image on the camera via direct connection (Wi-Fi Direct) with a smartphone (or computer), without the need for an access point (wireless LAN router).
0
Recording of videos and still images may be performed while monitoring.
.
Caution :
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone (or computer), the focus of the camera is fixed.
0
Recording stops when the smartphone (or computer) is disconnected.
0
Even when monitoring from a smartphone (or computer), the focus of the camera will be fixed if not operated for more than 3 hours. (Focus works again when the camera is operated.)
0
You may have difficulty establishing a connection via direct monitoring in an environment where the camera is placed away from the smartphone (or computer). In this case, connect using the access point (wireless LAN router).
“Image Monitoring via an Access Point at Home (OUTSIDE MONITORING)” (A p. 17)
What You Need
0
Smartphone or Windows computer (A wireless LAN that is compatible with WPA2 is necessary.)
Necessary Settings
To operate, it is necessary to connect a smartphone (or computer) to the camera. There are 2 ways to connect, namely “Wi-Fi Protected Setup (WPS)” and “Search and Connect”. Select the appropriate method of connection according to the device.
o
Wi-Fi Protected Setup (WPS)
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu. (Operation on this camera)
3
Tap “WPS”. (Operation on this camera)
Using Wi-Fi
13
.
4
Activate WPS on the smartphone (or computer) within 2 minutes. (Operation on the smartphone (or computer))
0
To activate WPS, refer to the instruction manual of the device in use.
5
A connection is established and Q appears on the camera’s screen.
.
o
Search and Connect
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu. (Operation on this camera)
.
3
Check the SSID and PASS shown on the camera’s screen, then add the smartphone (or computer) to connect. (Operation on the smartphone (or computer))
.
0
For details on connecting your smartphone (or computer) to a Wi-Fi network, please refer to the instruction manual of the phone terminal in use.
4
A connection is established and Q appears on the camera’s screen.
.
Using Wi-Fi
14
Operation Method
o
Smartphone (Android / iPhone)
Memo :
0
It is necessary to install the application on the smartphone.
“Installing Smartphone Applications” (A p. 44)
1
Start “Everio Sync.” on the smartphone after setting direct monitoring.
.
2
The smartphone starts to search for the camera automatically.
.
0
Once the camera is found, it will be connected.
3
A connection is established. (Adds application screen on the smartphone.)
0
Tap “CAMERA OPERATION” on the camera to enable operations from it. When operating from the camera, tap J on the camera to enable operations from the smartphone application.
0
Using smartphone applications
“Using Smartphone Applications” (A p. 44)
0
To end operations, tap “STOP”.
o
Computer (Windows 7)
1
Tap “CAMERA NETWORK INFO.” after setting direct monitoring. (Operation on this camera)
.
0
The URL for the computer to connect to appears.
2
Check the URL. (Adds network information screen.)
0
After checking the URL, tap “QUIT” to return to the previous screen.
3
Start Internet Explorer (web browser) on the computer and enter the URL.
0
Using the Wi-Fi function from the web browser
“Using the Wi-Fi Function from a Web Browser” (A p. 50)
0
To end operations, tap “STOP”.
Using Wi-Fi
15
Recording the Location Information
You can record the location information of the venue where recording is taking place via direct connection (Wi-Fi Direct) with a smartphone.
.
Memo :
0
To obtain the location information, it is necessary to start the smartphone application and connect it to the camera. Also, setting the “LOC INFO TRANS INT” for the smartphone application is necessary.
“Using Smartphone Applications” (A p. 44)
0
Activate the GPS function of the smartphone in advance.
0
The recorded location information can be used on the software provided with this unit. For more information, refer to “MediaBrowser Help”.
What You Need
0
Smartphone
Necessary Settings
To operate, it is necessary to connect a smartphone to the camera. There are 2 ways to connect, namely “Wi-Fi Protected Setup (WPS)” and “Search and Connect”. Select the appropriate method of connection according to the device.
o
Wi-Fi Protected Setup (WPS)
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu. (Operation on this camera)
.
3
Tap “WPS”. (Operation on this camera)
.
4
Activate WPS on the smartphone within 2 minutes. (Operation on the smartphone)
0
To activate WPS, refer to the instruction manual of the device in use.
0
A connection is established and Q appears on the camera’s screen.
o
Search and Connect
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu. (Operation on this camera)
.
3
Check the SSID and PASS shown on the camera’s screen, then register them on the smartphone to connect. (Operation on the smartphone)
.
0
A connection is established and Q appears on the camera’s screen.
0
For details on connecting your smartphone to a Wi-Fi network, please refer to the instruction manual of the phone terminal in use.
Using Wi-Fi
16
Operation Method
1
Tap “CAMERA OPERATION” after setting direct monitoring. (Operation on this camera)
.
0
The recording mode starts on this camera.
2
Activate the GPS function of the smartphone and start the application on it. (Check the “LOC INFO TRANS INT”)
“Using Smartphone Applications” (A p. 44)
3
Start recording. (Operation on this camera)
.
.
0
Z appears on the camera’s screen.
0
Tap J to return to the previous screen.
0
To end operations, tap “STOP”.
Memo :
0
Manual recording cannot be performed.
0
It is not possible to switch to the playback mode.
0
When operations from this unit are enabled, operations from the smartphone do not work. To operate from a smartphone, tap J.
Image Monitoring via an Access Point at Home (OUTSIDE MONITORING)
You can check the image on the camera with a smartphone (or computer) via an access point at home using wireless LAN router.
0
Recording of videos and still images may be performed while monitoring.
.
Caution :
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone (or computer), the focus of the camera is fixed.
0
Recording stops when the smartphone (or computer) is disconnected.
0
Even when monitoring from a smartphone (or computer), the focus of the camera will be fixed if not operated for more than 3 hours. (Focus works again when the camera is operated.)
What You Need
0
Smartphone or Windows computer
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
Memo :
0
Depending on the wireless LAN router in use and signal strength, you may experience connection problems or slow connections.
Necessary Settings
0
To operate, it is necessary to register the access point (wireless LAN router) for the camera to connect to.
“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 36)
0
In addition, it is also necessary to connect the smartphone (or computer) to the access point in advance.
*The above settings are not necessary if they have already been set for other functions.
0
For details on connecting your smartphone (or computer) to a Wi-Fi network, please refer to the instruction manual of the phone terminal in use.
Using Wi-Fi
17
Operation Method
o
Smartphone (Android / iPhone)
Memo :
0
It is necessary to install the application on the smartphone.
“Installing Smartphone Applications” (A p. 44)
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”. (Operation on this camera)
.
4
Start “Everio Sync.” on the smartphone.
.
5
The smartphone starts to search for the camera automatically.
.
0
If the camera cannot be found, enter the URL (LAN) displayed in “CAMERA NETWORK INFO.” directly. To display “CAMERA NETWORK INFO.”, refer to “Computer (Windows 7)”.
6
Log in with your username and password. (if authentication cannot be achieved)
.
0
The username is “everio” and the default password is “0000”.
“Changing the Settings” (A p. 27)
0
Using smartphone applications
“Using Smartphone Applications” (A p. 44)
0
To end operations, tap “STOP”.
o
Computer (Windows 7)
1
Tap “MENU”. (Operation on this camera)
Using Wi-Fi
18
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”. (Operation on this camera)
.
4
Tap “CAMERA NETWORK INFO.”. (Operation on this camera)
.
0
The URL (LAN) for the computer to connect to appears.
5
Check the URL (LAN).
.
0
After checking the URL, tap “QUIT” to return to the previous screen.
6
Start Internet Explorer (web browser) on the computer and enter the URL.
7
Log in with your username and password.
0
The username is “everio” and the default password is “0000”.
“Changing the Settings” (A p. 27)
0
Using the Wi-Fi function from the web browser
“Using the Wi-Fi Function from a Web Browser” (A p. 50)
0
To end operations, tap “STOP”.
Image Monitoring via the Internet (OUTSIDE MONITORING)
You can check the image on the camera via internet connection with a smartphone (or computer). *Connection to the internet is established via a wireless LAN router.
0
Recording of videos and still images may be performed while monitoring.
.
Caution :
0
Too much usage may cause high communication fees to be incurred, and there may be a limit to the volume of communication. For more details, please check your Internet or smartphone subscription.
0
If the network connection is slow, video images may appear jumpy, or audio sound may be interrupted or delayed.
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone (or computer), the focus of the camera is fixed.
0
Recording stops when the smartphone (or computer) is disconnected.
0
Even when monitoring from a smartphone (or computer), the focus of the camera will be fixed if not operated for more than 3 hours. (Focus works again when the camera is operated.)
0
To monitor images while you are out, make sure in advance that you can establish a connection via the Internet by entering the URL (WAN) displayed in “Network Information”. However, you cannot monitor (operate) in the same way as while you are out when your smartphone (or computer) is connected to a home network via Wi-Fi.
0
Start using after changing the password. If the password is not changed, there is a high risk of unauthorized access from others. Also, avoid using easily guessable passwords, such as birth dates. You are recommended to change your password periodically.
“Setting the Password (OUT MONITORING SET)” (A p. 28)
0
There is no guarantee that the operations will work with all computer environments. For example, the video download feature of mobile safari browser, etc. is not supported.
Setting Multiple Cameras in the Same Network： Take note of the following.
0
When UPnP is in use, cameras that are connected to the network later will be connected via the internet.
0
To set up multiple cameras, you need to fix the IP address for each of the cameras (configure the LAN settings of the access point manually). In addition, it is also necessary to perform settings of the wireless LAN router in use manually. (For setting details, refer to the instruction manual of the wireless LAN router in use.)
“Editing LAN Settings of Access Points (Wireless LAN Router)” (A p. 39)
Using Wi-Fi
19
What You Need
0
Smartphone or Windows computer
0
Wireless LAN router that supports UPnP (use a product that has a Wi-Fi certification logo)
To check whether UPnP is supported, please refer to the instruction manual of the wireless LAN router in use.
0
Internet connection with an obtainable global IP address
Memo :
0
Depending on the wireless LAN router in use and signal strength, you may experience connection problems or slow connections.
Necessary Settings
To operate, it is necessary to connect the camera to the internet via an access point (UPnP compatible wireless LAN router) in the house. As such, the following settings are required. *The above settings are not necessary if they have already been set for other functions.
0
Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 36)
0
Obtaining a dynamic DNS account
“Obtaining a Dynamic DNS (DDNS) Account” (A p. 29)
0
Setting the account on this camera
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)” (A p. 29)
Caution :
0
Even if registration is done correctly to the camera, access may be temporarily unavailable such as when the dynamic DNS server is down. To check whether the dynamic DNS server is working properly, access and check the DDNS server with a computer, etc.
Operation Method
o
Smartphone (Android / iPhone)
Memo :
0
It is necessary to install the application on the smartphone.
“Installing Smartphone Applications” (A p. 44)
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”. (Operation on this camera)
.
4
Tap “CAMERA NETWORK INFO.”. (Operation on this camera)
.
0
The URL (WAN) for the smartphone to connect to appears. (Does not appear if DDNS is not set or set incorrectly.)
0
[LUPnP] is displayed when UPnP cannot be used.
5
Check the URL (WAN).
.
0
After checking the URL, tap “QUIT” to return to the previous screen.
6
Start “Everio Sync.” on the smartphone.
Using Wi-Fi
20
.
7
Enter the confirmed URL (WAN) directly.
.
8
Log in with your username and password. (if authentication cannot be achieved)
.
0
The username is “everio” and the default password is “0000”.
“Changing the Settings” (
A p. 27)
0
Using smartphone applications
“Using Smartphone Applications” (A p. 44)
0
To end operations, tap “STOP”.
Using Wi-Fi
21
o
Computer (Windows 7)
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”. (Operation on this camera)
.
4
Tap “CAMERA NETWORK INFO.”. (Operation on this camera)
.
0
The URL (WAN) for the computer to connect to appears. (Does not appear if DDNS is not set or set incorrectly.)
5
Check the URL (WAN).
.
0
After checking the URL, tap “QUIT” to return to the previous screen.
6
Start Internet Explorer (web browser) on the computer and enter the URL.
7
Log in with your username and password.
0
The username is “everio” and the default password is “0000”.
“Changing the Settings” (A p. 27)
0
Using the Wi-Fi function from the web browser
“Using the Wi-Fi Function from a Web Browser” (A p. 50)
0
To end operations, tap “STOP”.
Using Wi-Fi
22
Send Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL SETTING)
.
Memo :
0
The size of the still image that is captured in “DETECT/MAIL SETTING” is 640 x 360.
0
Operation via connection to a smartphone (or computer) using “OUTSIDE MONITORING” may be performed even during detection standby.
0
When the camera is connected to a smartphone (or computer), “DETECT/ MAIL SETTING” will be temporarily unavailable.
0
You can set to record videos on this unit automatically during detection.
“Recording on this unit” (A p. 27)
0
To prevent too many e-mails from being sent in case of detections occurring frequently, you can set the interval of e-mail delivery.
“Setting detection interval” (A p. 27)
Caution :
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days of continuous usage.
0
While on standby for notification mails, the focus is fixed. Perform the camera settings first, then enable notification mails. Focus may not be set correctly if the notification mails start before camera settings are made. In this case, disable notification mails temporarily, then enable it again.
0
Be careful not to cause too much sending of e-mails. Depending on the internet provider that provides the e-mail service, the e-mails may be marked as spam or the usage limited may be exceeded. Be sure to check the terms of the internet provider in advance to find out if there are any restrictions on the number or size of e-mails that can be sent.
0
When setting another person as the recipient, be sure to obtain his/her consent in advance.
0
If you reply to the received e-mail by using this unit, the receiver can not check your replied e-mail by using this unit. Check the e-mails sent by this unit from computer, etc.
0
JVC will not be responsible for any trouble that occurs upon the sending of mails.
What You Need
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0
Internet connection
0
Account for sending e-mails (Supports SMTP. E-mail services that is only accessible from the web cannot be used.)
Necessary Settings
To send e-mails, the following settings are required. *The above settings are not necessary if they have already been set for other
functions.
0
Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 36)
0
Setting the account for sending e-mails
“Setting the Sender’s E-mail Address” (A p. 30)
0
Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
o
Selecting the Recipient’s E-mail Address
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “DETECT/MAIL SETTING”. (Operation on this camera)
.
4
Tap “RECIPIENT'S EMAIL”. (Operation on this camera)
.
5
Tap the e-mail address to be set as recipient. (Operation on this camera)
.
0
An icon a appears beside the recipient’s e-mail address.
0
After setting, tap “SET”.
0
Settings will not be saved until “SET” is tapped.
Using Wi-Fi
23
Operation Method
1
Set up the camera at the recording location.
2
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
3
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
4
Tap “DETECT/MAIL”. (Operation on this camera)
.
0
Images are captured automatically when moving subjects or human faces appear on the camera’s screen. (The PHOTO icon appears on the screen upon detection.)
“Changing the Settings” (A p. 27)
0
The captured still images will be sent via e-mail to the selected recipients.
Record and Send Videos via E-mail (VIDEO MAIL ATTN.)
Videos of up to 15 seconds can be recorded and sent via e-mail. With this function, short videos can be delivered easily even on a daily basis, such as to show the growing up of small children to their distant grandparents.
.
Memo :
0
Specifications of the videos sent via video mail are as follows: System: MP4 Video:
- H.264/MPEG-4 AVC baseline profile codec
- 640 x 360 resolution
- 30p frame rate
- 1 Mbps bit rate Audio:
- Advanced Audio Coding (AAC) system
- 48 kHz sampling rate
- 16 bit
- 2 channels
Caution :
0
Be careful not to cause too much sending of e-mails. Depending on the internet provider that provides the e-mail service, the e-mails may be marked as spam or the usage limited may be exceeded. Be sure to check the terms of the internet provider in advance to find out if there are any restrictions on the number or size of e-mails that can be sent.
0
When setting another person as the recipient, be sure to obtain his/her consent in advance.
0
Depending on the e-mail service provider, the sending of video mail may not be supported.
0
Too much usage may cause high communication fees to be incurred, and there may be a limit to the volume of communication. For more details, please check your Internet or smartphone subscription.
0
If you reply to the received e-mail by using this unit, the receiver can not check your replied e-mail by using this unit. Check the e-mails sent by this unit from computer, etc.
0
JVC will not be responsible for any trouble that occurs upon the sending of mails.
0
Videos captured via video mail are not saved to the camera or SD card.
0
Videos that have already been captured cannot be sent.
What You Need
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0
Internet connection
0
Account for sending e-mails (Supports SMTP. E-mail services that is only accessible from the web cannot be used.)
Using Wi-Fi
24
Necessary Settings
To send e-mails, the following settings are required. *The above settings are not necessary if they have already been set for other
functions.
0
Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 36)
0
Setting the account for sending e-mails
“Setting the Sender’s E-mail Address” (A p. 30)
0
Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
o
Selecting the Recipient’s E-mail Address
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “VIDEO MAIL ATTN.”. (Operation on this camera)
.
4
Tap the e-mail address to be set as recipient. (Operation on this camera)
.
0
An icon a appears beside the recipient’s e-mail address.
0
After setting, tap “SET”.
0
Settings will not be saved until “SET” is tapped.
Operation Method
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “VIDEO MAIL” (R) in the shortcut menu. (Operation on this camera)
.
3
Start recording.
.
0
Recording starts after the countdown (5 seconds).
.
0
You can allow the recording to be performed for 15 seconds or press the START/STOP button to stop.
4
Tap “SEND”. (Operation on this camera)
.
0
Sending of the video mail starts.
0
To check the file, tap “PLAY TO CHECK”.
0
When it is complete, tap “OK”.
Using Wi-Fi
25
Changing the Settings
To use the Wi-Fi function, it may be necessary to perform some settings on the camera and smartphone (or computer).
0
Registering the access points to connect (wireless LAN router)
“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 36)
0
Obtaining a dynamic DNS account
“Obtaining a Dynamic DNS (DDNS) Account” (A p. 29)
0
Setting the account on this camera
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)” (A p. 29)
0
Setting the sender’s e-mail address
“Setting the Sender’s E-mail Address” (A p. 30)
0
Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
Using Wi-Fi
26
Menu Settings
Setting Details
OUT MONITORING SET Configures various settings related to outside monitoring.
0
PASSWORD (Default: “0000”) Selects the password to access the camera.
“Setting the Password (OUT MONITORING SET)” (A p. 28)
0
UPnP (Default: “ON”) Sets the UPnP of the camera.
・OFF: Disables UPnP. ・ON: Enables UPnP.
“Setting the UPnP of this Camera (OUT MONITORING SET)” (A p. 28)
0
DDNS SETTING Configures various settings related to DDNS.
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)” (A p. 29)
VIDEO MAIL ATTN. Selects the recipient’s e-mail address for video mails.
“Record and Send Videos via E-mail (VIDEO MAIL ATTN.)” (A p. 25)
DETECT/MAIL SETTING Configures various settings related to notification mails.
0
RECIPIENT'S EMAIL Selects the recipient’s e-mail address for notification mails.
“Registering the Recipient’s E-mail Address” (A p. 33)
0
DETECTION METHOD (Default: “MOTION DETECTION”) Sets the detection method to start recording.
・MOTION DETECTION: Starts recording upon detection of subject’s movements. ・FACE DETECTION: Starts recording upon detection of human faces.
“Setting the Detection Method of this Camera (DETECT/MAIL SETTING)” (A p. 34)
0
DETECTION INTERVAL (Default: “10 minutes”) Sets the time period to enable detection again after the previous one.
“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” (A p. 35)
0
SELF RECORDING (Default: “ON”) Sets whether to record videos on this camera during detection.
・OFF: Does not record videos on this camera. ・ON: Records videos on this camera.
“Setting Self Recording on this Camera (DETECT/MAIL SETTING)” (A p. 35)
NETWORK SETTINGS Configures various settings related to the network.
0
ACCESS POINTS Adds, deletes, or perform LAN settings of access points (wireless LAN router).
“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 36)
0
Wi-Fi DIRECT SETTING Configures various settings related to direct monitoring.
・PASSWORD
Sets the password for direct monitoring. ENFORCED GROUP OWNER (Default: “ON”) Sets whether to enforce authorization of the group owner.
・OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
devices that do not support Wi-Fi Direct will be disabled.)
・ON: It is recommended to set this usually.
“Setting the Password (DIRECT MONITORING)” (A p. 40) “Setting the Enforced Group Owner (DIRECT MONITORING)” (A p. 41)
0
MAIL SETTING Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address” (A p. 30) “Registering the Recipient’s E-mail Address” (A p. 33)
0
MAC ADDRESS Displays the MAC address of the camera. (The above shows the MAC address when connected to an access point, while the below shows the address during direct connection.)
“Checking the MAC Address of this Camera” (A p. 42)
0
SET FROM WEB BROWSER Enables configuration of the camera settings from a web browser.
“Using the Wi-Fi Function from a Web Browser” (A p. 50)
0
LOCK SETTINGS Sets a password to prevent others from seeing the network settings.
“Protecting the Network Settings with a Password” (A p. 42)
0
INITIALIZATION Returns the network settings to their default values.
“Initializing the Network Settings” (A p. 43)
Using Wi-Fi
27
Setting the Password (OUT MONITORING SET)
Sets the password to access the camera. (Not more than 8 characters)
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “OUT MONITORING SET”. (Operation on this camera)
.
4
Tap “PASSWORD”. (Operation on this camera)
.
5
Enter the password. (Operation on this camera)
.
0
Tap on the on-screen keyboard to enter characters. The character changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
Setting the UPnP of this Camera (OUT MONITORING SET)
Sets the UPnP of the camera.
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “OUT MONITORING SET”. (Operation on this camera)
.
4
Tap “UPnP”. (Operation on this camera)
.
0
Tap “ON” or “OFF”.
0
Select “ON” to enable UPnP.
0
Select “OFF” to disable UPnP.
0
After setting, tap “SET”.
Using Wi-Fi
28
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be used on the web as usual even if the IP address changes when it is connected to the internet.
0
Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1
Access the following URL and register for an account. (Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the username.
2
Check that you have received a confirmation e-mail to the address used in registration, and access the URL stated in the e-mail. (Operation on a computer or smartphone)
3
Set the username and password used in registration on the camera. (Operation on this camera)
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)” (A p. 29)
4
Execute “OUTSIDE MONITORING”. (Operation on this camera)
If “OUTSIDE MONITORING” is executed while dynamic DNS settings are enabled, the camera will access the dynamic DNS server.
5
Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is displayed. (Registration complete)
“Image Monitoring via the Internet (OUTSIDE MONITORING)” (A p. 19)
Caution :
0
Registration will be canceled if you do not access the dynamic DNS server from the camera within 3 days. Perform the registration again in this case.
0
Registration will not be complete if the username and password set on this camera are incorrect. Be sure to check that they are correct.
0
Successful registration will be canceled too if you do not access the dynamic DNS server for 1 year.
Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)
Sets the dynamic DNS information of the obtained account on the camera.
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “OUT MONITORING SET”. (Operation on this camera)
.
4
Tap “DDNS SETTING”. (Operation on this camera)
.
5
Tap “DDNS”, then tap “ON”. (Operation on this camera)
.
Using Wi-Fi
29
6
Enter the DDNS settings (username/password). (Operation on this camera)
.
0
Tap “USERNAME” or “PASSWORD” to display the respective input screens.
0
Tap on the on-screen keyboard to enter characters. The character changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
Memo :
0
Only the JVC dynamic DNS service can be set on this camera.
Setting the Sender’s E-mail Address
Sets the address to be used for sending e-mails on the camera.
Memo :
0
By using Gmail as the sender’s mail address, some of the settings can be omitted. Use of Gmail is recommended for users who have a Gmail account.
1
Tap “MENU”. (Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu. (Operation on this camera)
.
3
Tap “NETWORK SETTINGS”. (Operation on this camera)
.
4
Tap “MAIL SETTING”. (Operation on this camera)
.
Using Wi-Fi
30
Loading...
+ 192 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use