JVC DLA-X5900WE, DLA-X7900WE, DLA-X9900BE, DLA-X7900BE, DLA-X5900BE Product Sheet

D-ILA PROJECTORS

DLA-X9900BE
DLA-X7900BE/WE
DLA-X5900BE/WE

The "Golden Ticket" to High Dynamic Range

The overwhelming power and details of 4K quality.
Discover a totally unprecedented viewing experience.

DLA-X9900BE

4K-resolution D-ILA Projector

• Dynamic contrast ratio: 1,600,000:1 • Native contrast ratio: 160,000:1

• Brightness: 2,000 lm • Compatible with HDMI standard (4K60P 4:4:4)
and HDCP 2.2

DLA-X7900BE/WE

4K-resolution D-ILA Projector

• Dynamic contrast ratio: 1,300,000:1 • Native contrast ratio: 130,00 0:1

• Brightness: 1,900 lm • Compatible with HDMI standard (4K60P 4:4:4)
and HDCP 2.2 • Available in 2 colours (black and white)

DLA-X5900BE/WE

4K-resolution D-ILA Projector

• Dynamic contrast ratio: 400,000:1 • Native contrast ratio: 40,000:1

• Brightness: 1,800 lm • Compatible with HDMI standard (4K60P 4:4:4)
and HDCP 2.2 • Available in 2 colours (black and white)

See the shower of light and details in pitch darkeness

4K video full of reality is achieved through high brightness and ultimate dynamic range

[ New 4K e-shift5 technology for improved definition ]

JVC’s e-shift technology, which shifts sub-frames by 0.5 pixels vertically and horizontally to achieve 4 times
the pixel density of the original content, has evolved to meet the growing demand for 4K. Now e-shift5
technology employs completely new algorithms to realize a dramatic boost in diagonal detection precision,
thus achieving even higher definition and improved picture quality.

Projection lens

D-ILA device e-shift device

D-ILA optical unit

Resolution doubles

in both directions

[ Complies with the HDCP 2.2 standards to enable 18Gbps 4K signal input ]

The projectors are capable of receiving full spec 4K signals including 4K /60P 4:4:4, 4K/60P 4:2:2/36-bit
and 4K/24P 4:4:4/36-bit as the units comply with the latest HDMI standard with 18 Gbps transmission
band-width compatibility for reproducing more vivid colours with more precise gradation.
In order to be compatible with copyright-protected content such as OTT video services and the UHD
Blu-ray discs, the projectors comply with the latest HDMI standard and HDCP 2.2.

[ Improved compatibility with high-resolution HDR content ]

Projectors require adjustment for screen size and environmental conditions to reproduce the PQ curve
of the HDR10 standard. In addition to HDR Auto Picture mode, JVC D-ILA projectors offer several
manual controls – including Picture Tone and Bright/Dark level gamma adjustment – so users can fine­tune the projected image to enhance their viewing experience. Additionally, the latest DL A-X9900BE
and DLA-X7900BE/WE feature an all-new colour profile that is 20% brighter. Together with Intelligent
Lens Aperture, which can be used with HDR10 content, this ensures the most dynamic HDR images
ever. These models can also display the MaxCLL and MaxFALL mastering data*1 available for HDR
content on some UHD Blu-ray discs.

*1: May not b e compatible with some c ontent or players.

[ High-quality video with Low Latency Mode ]

D-ILA projectors feature an improved
Low Latency Mode*2 that ensures faster
response with PC and game console
content. In addition, when this mode is
active high-bandwidth signals such as 4K
with 10-bit or 12-bit colour depth can be
processed without compression, resulting
in high-quality video performance without
any deterioration, regardless of source.

*2: The feature c annot be used with 3D play back mode or 3D Clear Mot ion Drive.

Smooth, vivid and high-definition. 4K quality as only D-ILA makes possible.

Technologies to realise D-ILA 4K images

[ Exceptionally bright 2,000 lumens

The combination of 265W high-output NSH lamp and highly efficient optical engine on the new D-ILA
projectors delivers a brightness of 2,000 lumens*3. What’s more, smoother and more powerful pictures
can be achieved through JVC’s original D-ILA device with an even narrower gap between pixels for
efficient use of light. Powerful, vivid and highly detailed 4K high-definition video can be enjoyed even
in environments where it’s hard to block out light, such as living rooms, that are not ideally suited for
viewing high-definition videos.

*3

to offer bright, high-resolution images ]

*3: DLA -X9900 BE

[ Multiple Pixel Control ]

D-ILA projectors feature original high-performance image processing technology, Multiple Pixel Control.
Through adoption of a new analysis algorithm, the MPC is capable of more accurate diagonal-detection
between frames for both full HD and full 4K resolution signals, delivering a thoroughly immersive high­definition 4K image. Compared to conventional band processing, MPC achieves the utter reality of 4K quality
by detecting and processing images in a higher frequency range to achieve exceptional presence and bokeh.

Original image Conventional MPC technology Multiple Pixel Control

[ High contrast ratio of D-ILA projectors delivers images with full of presence ]

JVC’s original D-ILA device combined with and an optical engine equipped with a wire grid that
complements the new high-output lamp results in high native contrast ratio of 160,000:1*4. Input
signals are analysed with an original algorithm that is combined with Intelligent Lens Aperture,
which automatically controls the black level of the image to achieve an ultimate dynamic contrast
of 1,600,000:1*4. The synergetic effect based on the ultimate dynamic range stemming from high­brightness, delivers sensational 4K video full of reality.

*4: D LA-X 9900 BE

[ Exceptional motion image processing technologies for smooth video reproduction ]

Two technologies are featured on the D-ILA projector – a moving image interpolation technology
Clear Motion Drive that is compatible with 4K60P 4:4:4 signals and Motion Enhance technology that
controls the driving performance of D-ILA devices by image characteristics. Owing to the two original
technologies, the projector is capable of reducing ghosting or afterimage issues often found in fast­moving images to reproduce a crisp and smooth moving images.

Clear Motion Drive OFF Clear Motion Drive ON

Technologies to create images that match viewer preferences

JVC’s advancing technologies and functions

[ Original Real Colour Imaging Technology

The colour reproduction ability on the original Real Colour Imaging
Technology has improved with its capability to accurately grasp the colour
information for precise reproduction. Also with the adoption of a new
colour filter capable of covering the DCI*6 colour space, it is now possible
to reproduce colours true to the original for exceptionally beautiful
4K images.

*5: DLA-X 9900BE and DL A-X7900BE /WE.
*6: DCI stands for D igital Cinema Initiati ves, a new standard for dig ital cinema.

*5

]

DLA-X9900BE

[ Colour Management System with 6-Axis Matrix ]

A 6-axis matrix of red, green, blue, cyan, magenta, and yellow enables the precise adjustment of hue,
saturation, and intensity. Only the colour being adjusted will be shown in colour while the others are
grey-toned, making operation more intuitive.

[ Auto-Calibration Function

Using an optical sensor, precise calibration can be performed in just a few easy steps to match the
changes in optical characteristics caused by the installation situation of the projector. Auto-Calibration
optimises all essential elements found in the image, including colour balance, gamma characteristics,
colour space, and colour tracking.

*7

]

[ Screen Adjustment Modes ]

The projector selects the best mode to match the screen being used for images with natural colour
balance. The modes are compatible with the latest models offered by the world’s major screen
manufacturers.

Screen Adjustment Modes OFF Screen Adjustment Modes ON

*8

*8: Please re fer to JVC website for a compar ison table of primar y screens and adjustm ent modes

[ Pixel Adjust Function ]

The Pixel Adjust function allows users to precisely correct colour deviation in 1/16-pixel increments. It is
also capable of segmenting the entire screen into 121 points and adjusting them individually to realise
clearer video without colour deviation. Two settings can be stored in the memory.

[ Lens Memory Function ]

This function stores ten*9 separate lens adjustments for zoom, shift and focus that can be easily recalled
when needed. Memory settings can be switched between each setup via the remote controller.

*9: DLA -X9900BE and D LA-X7900B E/WE

Immediately after use 1,000 hrs after use After Auto-Calibration

12-point manual gamma adjustment

Manual gamma adjustment, as requested by users, has been
added to the calibration software. In addition to PC-based
adjustments that are reflected to the image in real-time,
adjustments using optical sensor can also be performed. It also
features importing and exporting of gamma data.

*7: Exclusive JVC s oftware installe d on a PC connected to the p rojector via a LA N connection and opt ical sensor are requir ed to set viewing config urations and
auto calibra tion. Please visit th e JVC website for the deta ils.

Lens memory examples (when using CinemaScope screen)

Memory 1: Standard 16:9 Memory 2: CinemaScope Size

Memory 3: CinemaScope size with

subtitles outside of the screen

[ Industry Certified Projectors – THX 3D Display and ISF Certifications

*10

]

[ Even brighter and high-quality 3D images of D-ILA ]

Accreditation with THX 3D Display Certification which was established to ensure that the certified
projectors will precisely reproduce picture quality in home environments for both 2D and 3D content,
just as the original filmmaker envisioned. Encompassing more than 400 laboratory tests to evaluate a
projector’s colour accuracy, cross-talk, viewing angles and video processing, this certification helps to
guarantee high-definition quality.

*10: DLA-X9 900BE and DL A-X7900BE /WE. License d with ISF (Imaging Sci ence Foundation) C3 mod e.

Feature Comparison

Model DLA-X9900BE DLA-X7900BE/WE DLA-X5900BE/WE

4K e-shift5 Technology

18Gbps 4K signal input/HDCP 2.2

HDR10 compatibility

3D capability

Multiple Pixel Control

Clear Motion Drive

Motion Enhance

Low Latency Mode

Real Colour Imaging Technology

Colour Temperature
(Xenon light-source colour)

Picture Tone

Pixel Adjust

Lens Memory

Screen Adjustment Mode

Auto Calibration

12-point manual gamma adjustment

Picture Data In/Out

MaxCLL & MaxFALL Mastering Data display

THX 3D Display Certification

ISF C3 mode

*11: This func tion cannot be used wh ile projecting in 3D m ode. *12: Requires a commerciall y available optical se nsor and dedicated s oftware as well as P C and LAN cables.
*13: Requires dedic ated software as we ll as PC and LAN cabl es.

*11

●

*12

*13

*13

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ●

● ●

● ● ●

(by 1/16-pixel increment,

2 memories)

● (10 memories) ● (10 memories) ● (5 memories)

● ● ●

● ● ●

● ● ●

● ● ●

● ● ●

● ●

● ●

●

(by 1/16-pixel increment,

2 memories)

●

—

—

(by 1/16-pixel increment,

2 memories)

—

—

In addition to JVC’s original Frame Addressing method to reproduce 3D images with vivid colours,
the optical engine featuring a set of new D-ILA devices is capable of achieving more brightness.
Furthermore, 3D image adjustment functions such as Crosstalk Cancelling are featured to offer the
kind of realistic and exciting 3D images that only D-ILA can provide.

Notes about viewing 3D video content

• The optional 3D Synchro Emitter and 3D glasses are required to view 3D images from the D-IL A projectors .
3 D video software (3D media or output of 3D broadcas ts) and a 3D-compatible video player are also required.

• Perception of 3D images will vary with individual viewers.

• Stop viewing 3D images immediately if any discomfor t such as headaches, dizziness, eye fatigue, etc. occurs.

• Viewing of 3D images by children under the age of five is not recommended.

• Read the Safety Precautions and the User Ma nual carefully befo re viewing any 3D source.

Optional Accessories

Replacement Lamp

PK -L 2615U

RF (radio frequenc y) 3D Glasses

PK-AG3

RF (radio frequenc y) 3D Synchro Emitter

PK-EM 2

Projection Distance Chart Specications

Screen diagonal

(inch)

W (mm) H (mm) Wide (m) Tele (m)

60 1,32 8 747 1.78 3.66

70 1,5 49 872 2.09 4.28

80 1,771 996 2. 40 4.89

90 1,99 2 1,121 2.7 0 5 .51

100 2 ,214 1,24 5 3. 01 6 .13

110 2,435 1,370 3.31 6.75

120 2, 656 1,4 9 4 3.62 7.3 6

130 2,878 1,61 9 3.92 7.9 8

140 3,0 99 1,743 4.23 8.60

150 3,320 1,868 4.53 9.22

160 3,542 1,9 92 4.84 9.84

170 3,763 2,11 7 5.14 10. 45

180 3,98 4 2,241 5.45 11.0 7

190 4, 206 2,366 5 .75 11 .68

200 4,427 2,49 0 6.0 6 12 .30

*Projection distances are design specifications, so there is ±5% variation.

Display size (16:9) Projection distance

Device 0.7 inch Full HD D-ILA (1920×1080) x3
4K e-shift5 Technology Yes
Resolution 3840 x 2160
Lens x2 Zoom & Focus: Motorised; f=21.4-42.8mm / F3.2-4
Lens Shift ±80% Vertical and ±34% Horizontal (motorised)
Lens Cover Yes Yes —
Projection Display Size 60 inch – 200 inch (diagonal)
Light Source Lamp NSH 265W (lamp life: approx. 4,500 hours when the lamp is in Low mode)
Brightness 2,000 lm 1,900 lm 1,800 lm

Contrast Radio

Input Terminal HDMI 2 (3D/Deep Colour/HDCP2.2)

Output Terminal

Control Terminals

DLA-X9900BE DLA-X7900BE/WE DLA-X5900BE/WE

*1

Dynamic 1,600,000:1 1,300,000:1 400,000:1
Native 160,000:1 130,000:1 40,000:1

Trigger 1 (Mini jack, DC12V/100mA)
3D Sync 1 (Mini DIN 3pin)
RS-232C 1 (D-sub 9pin)

LAN (RJ-45) 1

DLA-X9900BE DLA-X7900BE/WE DLA-X5900BE/WE

Video Input Signal Format
(Digital)

PC Input Signal Format
(HDMI)

3D Format

Power Consumption 380W (Normal standby: 1.5W, Eco-mode standby: 0.4W)
Fan Noise 21dB (When the lamp is in Low mode)
Power Requirement AC110V-240V, 50/60Hz
Dimensions (W x H x D) 455 x 179 x 472 mm
Weight (net) 15.6kg 15.6kg 15.4kg

*1 Resolutio n is 1920x1080 at 3D mo de.
*2 When th e video input signal i s at 4096 x 2160p, data above 3, 840 is not display ed equally on the left a nd right.

Frame
Packing

Side-by-Side
(half)

Top & Bottom

480p, 576p, 720p 60/50, 1080i 60/50,1080p 60/50/24,

3840 x 2160p 60/50/30/25/24,

*2

4096 x 2160p

VGA/SVGA/XGA/WXGA/WXGA+/SXGA/WSXGA+

720p 60/50, 1080p 60/50/24, 1080i 60/50

60/50/30/25/24

720p 60/50, 1080p 24

720p 60/50, 1080p/24

Connectors

External Dimensions

(unit: mm)

Top Bottom Front Side (left)

80

4725

29091

79

48

11 128

Rear

4545

179

ø60

472

24

11755

455

• D-ILA is a registered trademark of JVCKENWOOD Corporation. • THX and THX logo are trademarks of THX Ltd., which may be registered in some jurisdictions. • ISF is a registered trademark of Imaging Science Foundation, Inc. • HDMI, the HDMI logo and High-Definition Multimedia Interface
are registered trademarks of HDMI Licensing LLC. • All other brand or product names may be trademarks and/or registered trademarks of their respective owners. • Please be aware that, because the D-ILA device is manufactured using highly advanced technologies, 0.01% or fewer of the pixels
may be non-performing (always on or off). • The projector is equipped with an ultra-high pressure mercury lamp, which may break, emitting a loud noise, when it is subjected to shock or after it has been used for some length of time. • Please note that, depending on how the projector is used,
there can be considerable difference between individual lamps regarding how many hours they will operate before requiring replacement. • An additional payment is required for installation of the projector or a new lamp, if necessary.

• All pictures on this brochure are simulated. • Design and specifications are subject to change without notice. • Any rights not expressly granted herein are reserved.

58

41 37

337

45 45

11 128

Copyright © 2017, JVCKENWOOD Corporation. All Rights Reserved.

http://uk.jvc.com
http://dk.jvc.com
http://no.jvc.com

http://se.jvc.com

Printed in Japan

"JVC" is the trademark or registered trademark of JVCKENWOOD Corporation.

PJC-17005EJ