CS-GW1200
12” Dual Voice Coil Subwoofer Unit
Subwoofers
1200W
Max.
Key Benefits
350W
RMS
Butyl Rubber
Surroound
Dual Voice
Coil
A high-performing subwoofer with clear-cut sound. The full use of rubber reduces unwanted vibrations for
distortion-free bass.
Double Structure Diaphragm
The double structure reinforces
the diaphragm and reduces
distortion during high amplitude
for clear and deep bass.
Butyl Rubber Surround
The butyl rubber edge absorbs the minute
diaphragm vibrations. Its high tolerance to
large amplitudes enables bass reproduction
with little distortion.
Dual Input Voice Coil
The unit has 4-ohm dual voice coils, enabling high power input.
Damper with Woven Wire
The wire is laced into the damper to prevent
abnormal vibrations and touching against the
diaphragm. This also helps avoid disconnection
during high-signal input.
CS-GW1200
12'' Dual Voice Coil Subwoofer Unit
Rigid Structure
The full-covering cap prevents the woofer from deforming and increases its strength,
to provide clear, distortion-free bass.
FULL COVER CAP (CS-GW1200) NORMAL CAP
Large Magnets and Voice Coil
The CS-GW1200 has 5-11/16 inch, 53.7 oz magnet and 2-inch aluminum voice coil,
enabling 350W rated input. You can play steady, deep bass with a high-output
amplifier.
Rubber Magnet Cover
The flexible material ensures safe installation,
and absorbs vibrations for a clear low frequency
reproduction.
Key Specifications
CS-GW1200
Type 11
Max. Power 1200W
RMS Power 350W
Sensitivity 87dB
Frequency Response 23 - 2,000Hz
Impedance 4Ω + 4Ω (Dual Input)
Fs 25.4Hz
Qts 0.315
Vas 3.42 ft
Magnet Mass 53.7 oz
Hole Cutout Diameter Dia. 11” (278 mm)
Mounting Depth 5
13/16
” (30 cm)
3
1/2
” (139.6 mm)
Recommended System
CS-ARS650 CS-ARS650
CS-AR680 CS-AR680
KD-AVX77
8-Dia. 1/4 inch
KS-AR8004D
KS-AR9501D
CS-GW1200
[6.3mm] HOLES
Dia. 11-29/32 inch [302 mm]
Dia. 12-15/16 inch [328 mm]
13/16 inch [19.7 mm]
Front
Rear
Dia. 10-29/32 inch [276.5mm]
5-17/32 inch [139.6 mm]
NTK-9520-31