JVC AV-32D501, AV-36D501 User Manual

COLOR TELEVISION

For models:

AV-36D501
AV-36D201
AV-32D501
AV-32D201

USER'S GUIDE

AV-27D501
AV-27D201

Illustration of AV-32D501 and RM-C384

IMPORTANT NOTE TOTHE CUSTOMER

In the spaces below, enter the model and serial number

for your television (located at the rear of the television cabinet).

Staple your sales receipt or invoice to the inside cover of this guide.

Keep this user's guide in a convenient place for future reference.

Keep the carton and original packaging for future use.

Serial Number Model Number

IMPORTANT SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

C AU T I O N :To reduce the risk of electric shock .

Do not remove cover (or back ) .

No user serv i c e a ble parts inside.

R e fer servicing to qualified service pers o n n e l .

The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dan­gerous voltage” within the product’s enclosure
that may be of sufficient magnitude to consti­tute a risk of electric shock to persons.

The exclamation point within an equilateral tri­angle is intended to alert the user to the pres­ence of important operating and maintenance
(servicing) instructions in the literature accom­panying the appliance.

IMPORTANT SAFEGUARDS

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV
set has been engineered and manufactured to assure your
personal safety. But improper use can result in potential electri-
cal shock or fire hazards. In order not to defeat the safeguards
incorporated in this TV set, observe the following basic rules
for its installation, use and servicing.
And also follow all warnings and instructions marked on your
TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one

blade of the plug is wider than the other).

(POLARIZED-TYPE)

WARNING: TO PREVENT FIRE OR SHOCK

HAZARDS, DO NOT EXPOSE THIS
TV SET TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY,

OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF
THIS UNIT.

1. Operate only from the power source speci­fied on the unit.

2. Avoid damaging the AC plug and power cord .

3. Avoid Improper installation and never posi­tion the unit where good ventilation is unat­tainable.

4. Do not allow objects or liquid into the cabi­net openings.

5. In the event of trouble, unplug the unit and
call a service technician. Do not attempt to
repair it yourself or remove the rear cover.

Changes or modifications not approved by JVC
could void the warranty.

* When you don’t use this TV set for a long
period of time, be sure to disconnect both the
power plug from the AC outlet and antenna for
your safety.

* To prevent electric shock do not use this
polarized plug with an extension cord, recepta­cle or other outlet unless the blades can be
fully inserted to prevent blade exposure.

This safety feature allows the plug to fit into the power outlet
only one way. Should you be unable to insert the plug fully
into the outlet, try reversing the plug.
Should it still fail to fit, contact your electrician.

2 Operate the TV set only from a power source as indicated

on the TV set or refer to the operating instructions for this
information. If you are not sure of the type of power supply
to your home, consult your TV set dealer or local power
company. For battery operation, refer to the operating
instructions.

3 Overloaded AC outlets and extension cords are dangerous,

and so are frayed power cords and broken plugs. They may
result in a shock or fire hazard. Call your service technician
for replacement.

4 Do not allow anything to rest on or roll over the power cord,

and do not place the TV set where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water — for example, near a

bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TVset, be sure the

this purpose. Such additions may result in a hazard .

13 For added protection of the TV set during a lightning storm or

when the TV set is to be left unattended for an extended peri­od of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning
s t o rms or power line surg e s .

14 A TVset and cart combination should be moved with care .

Quick stops, excessive force, and uneven surfaces may cause
the TV set and cart combination to overt u rn .

SERVICE

15 Unplug this TV set from the wall outlet and refer servicing to

qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the

operating instructions. Adjust only those controls that are
c o v e red in the operating instructions as improper adjust­ment of other controls may result in damage and will often
re q u i re extensive work by a qualified technician to re s t o re

the TVset to normal operation.
E. If the TVset has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in perform-

ance — this indicates a need for service.

1 6 Do not attempt to service this TVset yourself as opening or

removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service person­n e l .

17 When replacement parts are re q u i red, have the service tech-

nician verify in writing that the replacement parts he uses
have the same safety characteristics as the original part s .
Use of manufacture r’s specified replacement parts can pre­vent fire, shock, or other hazard s .

18 Upon completion of any service or repairs to this TV s e t ,

please ask the service technician to perf o rm the safety check
described in the manufacture r’s service literature .

19 When a TV set reaches the end of its useful life, improper dis-

posal could result in a picture tube implosion. Ask a qualified
s e rvice technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that pro­vides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.

antenna system is grounded so as to provide some pro t e c t i o n
against voltage surges and built-up static charges. Section 810
of the National Electrical Code provides information with re s p e c t
to proper grounding of the mast and supporting stru c t u re ,
g rounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna discharge unit,
connection re q u i rements for the grounding electro d e .

7 An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

8 TV sets are provided with ventilation openings in the cabinet

to allow heat generated during operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV

set by placing it on a bed, sofa, rug, etc.

— Never place a TV set in a “built-in” enclosure unless

proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat re g i s t e r.

9 To avoid personal injury:

— Do not place a TVset on a sloping shelf unless properly secure d .
— Use only a cart or stand recommended by the TV s e t

m a n u f a c t u re r.

— Do not try to roll a cart with small casters across thresh-

olds or deep pile carpets.

— Wall or shelf mounting should follow the manufacturer’s

instructions, and should use a mounting kit approved by

the manufacturer.

USE

10 Caution children about dropping or pushing objects into the TV set

t h rough cabinet openings. Some internal parts carry hazard o u s
voltages and contact can result in a fire or electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do

not use liquid or an aerosol cleaner.

12 Never add accessories to a TV set that has not been designed for

WELCOME!

Congratulations on your new television purchase! We thank you for choosing JVC.

We know you are anxious to start watching your new television, but before you operate it, please
read this guide and then keep it handy for future reference. After all you just bought a great TV with a lot
of terrific features, you should know what each feature is and how to use it properly!

Please note, as you read though this guide there are illustrations of select models for your
reference. There are several models covered in this guide and therefore each illustration may not be of
the specific model you own. Be sure to look for the similar feature on your TV.

Again, congratulations and thank you for choosing JVC! Enjoy!

TABLE OF CONTENTS

CONNECTIONS

Connections Checklist . . . . . . . . . . . . . 5

Panel Diagrams . . . . . . . . . . . . . . . . . 5

Cable and VCR Connections . . . . . . . . . . 6

S - Video Connections. . . . . . . . . . . . . . 6

Connecting to a DVD Player . . . . . . . . . . 8

Connecting to an External Amplifier . . . . . . 8

Connecting to JVC AV Compu Link

Capable Components . . . . . . . . . 9

Connecting to a Camcorder . . . . . . . . . . 9

GETTING STARTED

Remote Controls . . . . . . . . . . . . . . . 10

Power . . . . . . . . . . . . . . . . . . . . . 11

Adjusting Volume . . . . . . . . . . . . . . . 11

Changing Channels . . . . . . . . . . . . . . 11

Remote Programming . . . . . . . . . . . . 12

CATV & Satellite Codes . . . . . . . . . . . . 12

VCR Codes . . . . . . . . . . . . . . . . . . 13

MENU FUNCTIONS

Using the Menu . . . . . . . . . . . . . . . . 14

Plug In Menu

I n t ro d u c t i o n. . . . . . . . . . . . . . 1 5

L a n g u a g e. . . . . . . . . . . . . . . 1 5

Auto Tuner Setup . . . . . . . . . . . 15

Set Clock

Auto (XDS). . . . . . . . . . . 16

M a n u a l. . . . . . . . . . . . . 1 6

F i n i s h. . . . . . . . . . . . . . . 1 6

Channel Summary. . . . . . . . . . . . . . . 17

V- C h i p. . . . . . . . . . . . . . . . . . . . . 1 8

Set Lock Code. . . . . . . . . . . . . 21

Picture Settings

Tint . . . . . . . . . . . . . . . . . . 2 2

Color . . . . . . . . . . . . . . . . . . 22

Picture . . . . . . . . . . . . . . . . . 22

Bright . . . . . . . . . . . . . . . . . 2 2

Detail . . . . . . . . . . . . . . . . . 2 2

Noise Muting . . . . . . . . . . . . . 22

Set Video Status . . . . . . . . . . . . 22

Menu Functions (Continued)

Sound Settings

Bass . . . . . . . . . . . . . . . . . . 23

Treble . . . . . . . . . . . . . . . . . 2 3

Balance . . . . . . . . . . . . . . . . 23

MTS (Multi-channel TV Sound) . . . . 23

Some Sound Advice . . . . . . . . . . 23

General Items

On/Off Timer . . . . . . . . . . . . . . 24

T V Speaker . . . . . . . . . . . . . . 2 5

Audio Out . . . . . . . . . . . . . . . 25

Component-In . . . . . . . . . . . . . 25

Closed Caption . . . . . . . . . . . . 25

BUTTON FUNCTIONS

M e n u. . . . . . . . . . . . . . . . . . . . . . 2 6

E x i t. . . . . . . . . . . . . . . . . . . . . . 2 6

Display . . . . . . . . . . . . . . . . . . . . 2 6

Video Status . . . . . . . . . . . . . . . . . . 26

Sleep Timer . . . . . . . . . . . . . . . . . . 26

I n p u t. . . . . . . . . . . . . . . . . . . . . . 2 6

B B E. . . . . . . . . . . . . . . . . . . . . . 2 7

Hyper Surround . . . . . . . . . . . . . . . . 27

Muting . . . . . . . . . . . . . . . . . . . . . 27

Number Buttons (10 Key Pad) . . . . . . . . 27

100+ . . . . . . . . . . . . . . . . . . . . . . 27

R e t u rn +. . . . . . . . . . . . . . . . . . . . 2 7

VCR Buttons . . . . . . . . . . . . . . . . . . 27

L i g h t. . . . . . . . . . . . . . . . . . . . 2 7

PIP (Picture-In-Picture)

I n t ro d u c t i o n. . . . . . . . . . . . . . 2 8

O n / M o v e. . . . . . . . . . . . . . . 2 8

F re e z e. . . . . . . . . . . . . . . . . 2 8

S w a p. . . . . . . . . . . . . . . . . . 2 8

Channel +/-. . . . . . . . . . . . . . 2 8

S o u rc e. . . . . . . . . . . . . . . . . 2 8

APPENDICES

Troubleshooting . . . . . . . . . . . . . . . . 29

Limited Warranty . . . . . . . . . . . . . . . 30

Authorized Service Centers . . . . . . . . . . 31

Specifications . . . . . . . . . . . . Back Cover

Connections 5

CONNECTIONS CHECKLIST - READ ME FIRST

The Connections Checklist section of this guide is a list of ideas to keep in mind while you
setup your new TV. It is designed to help us not-so-technically-minded individuals make our
connections properly. If you read this section and still can’t identify the plugs, connectors and
components you have, please ask someone for help in making your connections.

1) Always refer to the connection instructions in the
user’s guide for your components first. The
manufacturer will provide the most detailed
information about their products.

2) Know your jacks and plugs - most are color coded:

• Yellow plugs are Video connections

• Red plugs are Right Audio connections

• White (or black) plugs are Left Audio (or Mono)
connections. If your VCR is mono-sound, it will have
only a white or black plug, no second red one).

3) Perform one connection at a time. If you have
several accessories to connect, make sure each
connection is correct by checking to see that it works
properly before trying the next connection.

4) Unplug the power cord during each connection.

5) Follow the In and Out Concept. Remember In and

Out - the Output jack from one device will go to the
Input jack of the other. Read the jack panels, they are
all labeled.

6) The AV Compu Link Cable is supplied with certain
JVC devices. If you have a JVC Compu Link VCR or
other piece of equipment, but don’t have an AV
Compu Link cable, contact your local JVC dealer.

A/V Input Plug

RF Connectors

S-Video Plug

AV Compu Link Cable

Panel Diagrams

Front Panel • All D-Series Models

Rear Panel • AV-36D501

• AV-32D501 • AV-27D501

Front Panel Door opened

Rear Panel • AV-36D201

• AV-32D201 • AV-27D201

6 Connections

Cable and VCR Connections

There are three basic types of antenna or cable connections:

• If you have an antenna or have a cable system that does not require you use a cable box to
select channels, please refer to Diagram #1.

• If you have a cable system that requires the use of a cable box to access all the channels, please
refer to Diagram #2.

• If you have a cable system that requires the use of a cable box to access certain premium channels,
but not “basic” cable channels, please refer to Diagram #3.

• For instructions on connecting a VCR only, please see the Quick Setup Guide.

• For information on using Picture In Picture (PIP), please see page 28.

1

Illustration of AV-32D501

1) Connect the antenna or cable TV wire from the wall outlet, in to the RFInput of the two-way splitter.

2) Connect an RF cable from the one of the RFOutputs on the splitter, in to the RF Input on the back of the VCR.

3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV.

4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack.

5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.

6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

• If your VCRis a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s Left Audio Input.

• Please consult your VCR’s owner’s manual for more information on its operation.

S-Video Connections

You may also choose to connect video devices (VCR, Camcorders, etc) by using an S-Video Cable. S-Video
may be substituted in any of the connections diagrams included here. To use S-Video:

1) Plug an S-Video cable out from the video device and in to the TV’s S-Video Input.
Keep the audio connections the same as shown in the diagrams.

• D501 Series televisions have two S-Video inputs, D201 Series televisions have one.

Connections 7

Audio/Video Connections - Continued

2

Illustration of AV-32D501

1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.

2) Connect an RF cable from the cable box RF Output, in to the RF Input on the back of the VCR.

3) Connect an RF cable from the RF Output on the VCR, in to the RF Input on the back of the TV.

4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack.

5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.

6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

3

Illustration of AV-32D501

1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.

2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF I n p u t .

3) Connect an RF cable from the Cable Box Output, in to the VCR R F I n p u t .

4) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV.

5) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack.

6) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.

7) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

8 Connections

Connecting to a DVD Player

Illustration of AV-32D501

1) Connect Green cable out from DVDplayer “Y” Video Output, in to TV “Y” Component Input.

2) Connect Blue cable out from DVDplayer “PB” Video Output, in to TV “ PB” Component Input.

3) Connect Red cable out from DVD Player “PR” Video Output, in to TV PR” Component Input.

4) Connect Red Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2.

5) Connect White Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.

• Green, blue and red are the most common colors for DVD cables. Some models may vary colors, please
consult the user’s manual for your DVD Player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of
connections (DVD or Audio Output) before starting the other to avoid accidentally switching the cables.

• Please set the COMPONENT-IN on the initial Setup Menu to “YES” whenever you connect a DVD player.

Connecting to an External Amplifier

Illustration of AV-32D501

1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack.

2 ) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack.

• See also ‘TV Speaker’ and ‘Audio Out’ on page 25 for more information on using external speakers.

Connections 9

Connecting to JVC AV Compu Link Capable Components

JVC’s AV Compu Link feature makes playing video tapes totally automatic. Simply insert a pre-recorded tape*
into your JVC-brand VCR and the VCR will automatically turn on and begin playback. At the same time, using
the AV Compu Link, the VCR sends a signal to the television telling it to turn on and switch to the proper video
input to watch a video tape.

• The AV Compu Link cable may be included with the JVC AVCompu Link accessory you wish to connect.
If it is not, contact an authorized JVC Service Center for part # EWP 805-012.

• AV Compu Link can only be used with JVC-brand products.

Illustration of AV-32D501

To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link input on your VCR or other Compu
Link device. Plug the other end of the AV Compu Link cable into the AV Compu Link input at the rear of the television.

Connecting to a Camcorder

You may connect a camcorder to your television by using the front Input Jacks (Input 3) located under the front
panel door. To access, press lightly on the door to open it. You may also connect a game console or other

equipment using these jacks. Camcorders may also be connected to the television’s rear input jacks.

1) Connect the yellow video cable out from the Camcorder’s Video Output, in to the TV’s Video Input jack.

2) Connect the white audio cable out from the Camcord e r’s Left Audio Output, in to the TV’s Left Audio Input Jack.

3) Connect the red audio cable out from the Camcord e r’s RightAudio Output, in to the TV’s Right Audio Input jack.

• If your Camcorder is a mono sound model it will have only one audio jack. Connect to the TV’s Left Audio Jack.

NOTES (For AV Compu Link):

* In order for the VCRplayback to begin automatically, the re c o rding tabs must be removed from the VHStape. If the tab is in place,

automatic switching will occur when you push the VCR’s PL AY b u t t o n .

• The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.

• If your JVC-brand VCR has “ACode/B Code Remote Control Switching” (see your VCR’s instruction book), using VCR A Code will
switch the TVto input 1. If you use Input 1 for video input from your cable box, use VCRB Code to select the TV Video Input 2.

• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi’s connection instructions for detailed
connection inform a t i o n .

• AV C O M P UL I N KE X is compatible with the following receivers: RX-664V, RX-665V, RX-668VBK, RX-774V, RX-778VBK, RX-884V,
RX-888VBK, RX-1024V, RX-1028VBK, and later receiver models.

10 Getting Started

RM-C384

AV-36D501 • AV-32D501

• AV-27D501

Changing the Batteries

Be sure to use only size AAb a t t e r i e s .

Push down on the re m o t e ’s back cover and

1

slide towards the bottom to remove it.

I n s e rt two AA batteries (supplied), carefully

2

noting the "+" and "-" markings on the
batteries and on the remote control. To avoid
a potential short circuit, insert the "-" end first.

When batteries are installed, slide the cover

3

back into place (until it clicks into position).

• If the remote control acts erratically, replace the
batteries. Typical battery life is six months to one
year.

• We recommend using alkaline batteries for
longer battery life.

RM-C383

AV-36D201 • AV-32D201

• AV-27D201

When you change the batteries, try to complete the
task within three minutes. If you take longer than thre e
minutes, the remote control codes for your VCR
and/or Cable Box may have to be reset (page 12-13).