Jura IMPRESSA C9 One Touch Instruction Manual

The IMPRESSA C9 Manual
The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Table of contents
Your IMPRESSA C9
Control elements 4 Proper use For your safety The IMPRESSA C9 Manual
1 IMPRESSA C9
2 Preparing and using for the first time
3 Familiarising yourself with the control options
4 Preparation at the touch of a button
5 Permanent settings in programming mode
6
6
10
Symbol description ......................................................................................................................................10
11
Connector System
©
....................................................................................................................................12
JURA on the Internet ....................................................................................................................................12
Knowledge Builder .......................................................................................................................................12
13
Set up ............................................................................................................................................................. 13
Filling the water tank ................................................................................................................................... 13
Filling the bean container ........................................................................................................................... 13
First-time use ................................................................................................................................................14
Using and activating filter ..........................................................................................................................15
Determining water hardness and adjusting ............................................................................................16
Adjusting the grinder ..................................................................................................................................17
Switching on .................................................................................................................................................18
Switching off .................................................................................................................................................18
19
Preparation at the touch of a button .......................................................................................................20
One-off settings before and during preparation ...................................................................................20
Adjusting the default amount of water to suit the cup size .................................................................21
Permanent settings in programming mode ..........................................................................................22
Query information and maintenance status..........................................................................................24
26
Ristretto, espresso and coffee ...................................................................................................................26
Cappuccino...................................................................................................................................................26
Pre-ground coffee ....................................................................................................................................... 27
Hot milk and milk foam .............................................................................................................................28
Hot water ......................................................................................................................................................29
30
Products ........................................................................................................................................................ 30
Energy saving mode (Energy Save Mode E.S.M.
©
) ...............................................................................32
Automatic switch-off .................................................................................................................................. 32
Restore factory settings ............................................................................................................................. 33
2
Table of contents
Unit amount of water .................................................................................................................................34
Language ...................................................................................................................................................... 35
6 Maintenance
36
Maintenance tips .........................................................................................................................................36
Rinse machine..............................................................................................................................................36
Filter change .................................................................................................................................................37
Clean machine .............................................................................................................................................38
Descale machine .........................................................................................................................................40
Rinsing the Cappuccino Frother ...............................................................................................................42
Cleaning the Cappuccino Frother.............................................................................................................43
Disassembling and rinsing the Easy Cappuccino Frother....................................................................44
Disassembling and rinsing the Professional Cappuccino Frother ......................................................44
Cleaning the bean container .....................................................................................................................45
Descaling the water tank ...........................................................................................................................45
7 Display messages 8 Troubleshooting 9 Transport and environmentally neutral disposal
46
48
49
Transport / Empty system .........................................................................................................................49
Disposal .........................................................................................................................................................49
10 Technical data Index
51
JURA contact details / Legal information
50
56
3
Control elements
Control elements
1
2 3
4
5
6
8
9
10
11
12
13
14
7
Figure: IMPRESSA C9 Piano Black
1 Cover of filler funnel for pre-ground coffee 2 Filler funnel for pre-ground coffee 3 Water tank cover 4 Water tank 5 Power cable (side of machine) 6 Coffee grounds container 7 Drip tray
4
8 Q On/off button 9 Fineness of grind switch 10 Bean container cover 11 Bean container
with aroma preservation cover
12 Connector System
©
for removable frothers 13 Easy Cappuccino Frother 14 Height-adjustable coffee spout 15 Cup platform
15
Control elements
1
2
3
4
Front left:
1 Plain text display
u Ristretto button i Espresso button o Coffee button c Maintenance button v Pre-ground coffee button
Front right:
p Cappuccino button ü Milk foam button m Hot water button
4 Easy Cappuccino Frother 5 Professional Cappuccino Frother
6 Hot water nozzle 2 Rotary Switch cover 3 Rotary Switch
The Connector System© permits the use of different frothers. These are available from stockists.
4 5
6
5
Important information
Proper use
The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroap­parate AG cannot accept any responsibility for the consequences of improper use.
Before using the machine always carefully read and comply with all these instructions. Keep this man­ual close to the IMPRESSA and, if appropriate, pass it on to the next user.
For your safety
6
Please read and note carefully the following impor­tant safety information. By doing this, you can avoid the life-threatening danger of electric shock:
Z Never use a machine which has been dam-
aged or with a defective power cable.
Z For information on what to do in case of dam-
age, for example if there is a smell of burning, unplug the machine immedi ately from the mains supply and contact the JURA service centre.
Z If the power cable for this machine is dam-
aged, it must be repaired either directly by JURA or by a JURA approved service centre.
Z Make sure that the IMPRESSA and the power
cable are not located close to hot surfaces.
Z Be careful to ensure that the power cable does
not get caught and does not rub against sharp edges.
Z Never open and repair the machine yourself.
Do not modify the machine in any way that is not described in the IMPRESSA Manual. The
Important information
machine contains live parts. If opened, there is a danger of serious injury. Repairs may only be carried out by JURA approved service centres, using original spare parts and accessories.
There is a risk of scalds or burns on the spouts or on the nozzle:
Z Place the machine out of the reach of children. Z Do not touch any hot parts. Use the handles
provided.
Z Be careful to ensure that the appropriate noz-
zle is installed and clean. The nozzle or parts of the nozzle might come off if the parts are not assembled correctly or a blockage occurs.
A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:
Z Never allow the power cable to loosely hang
down. The power cable can be tripped over or damaged.
Z Protect your IMPRESSA from environmental
influences such as rain, frost and direct sun­light.
Z Do not put the IMPRESSA, cable or connec-
tions in water.
Z Do not put the IMPRESSA or any individual
parts in the dishwasher.
Z Switch your IMPRESSA off with the On/Off but-
ton before cleaning it. Always wipe your IMPRESSA with a damp cloth rather than a wet one, and protect it from prolonged water splash.
7
Important information
Z Only connect the machine to a power supply
in accordance with the information on the rat­ing plate. The rating plate is located on the underside of your IMPRESSA. Further technical data is given in Chapter 10 ‘Technical Data’.
Z Use only original JURA care products. Use of
accessories that are not explicitly recom­mended by JURA could damage the IMPRESSA.
Z Do not use any coffee beans treated with addi-
tives or caramelised coffee beans.
Z Always fill the water tank with cold, fresh mains
water.
Z If you are absent for a prolonged period of
time, turn the machine off.
Z Children may not clean or service the machine
unless supervised by a responsible person.
Z Do not allow children to play with the machine. Z Keep children under the age of 8 away from
the machine, or supervise them constantly.
Z Children aged 8 and over may only operate
the machine without supervision if they have been instructed in how to use it safely. Chil­dren must be able to recognise and under­stand the potential dangers arising from incor­rect use.
People, including children, who
Z do not have the physical, sensory or mental
capabilities to use the machine safely or
Z are inexperienced or lack knowledge in how to
use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it cor­rectly.
8
Important information
Safe handling of the CLARIS filter cartridges:
Z Filter cartridges should be kept out of the
reach of children.
Z Store them dry in the sealed package. Z Protect them from heat and direct sunlight. Z Do NOT use damaged filter cartridges. Z Do NOT open filter cartridges.
9
The IMPRESSA C9 Manual
The IMPRESSA C9 Manual
You are holding the manual for your IMPRESSA C9 in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers.
Chapter 2, ‘Preparing and using your IMPRESSA for the first time’, explains step-by-step how to set up and prepare the IMPRESSA.
Chapter 3, ‘Familiarising yourself with the control options’ is impor­tant for you to read as you are familiarising yourself with your IMPRESSA. It invites you to actively explore all the different coffee experiences that it offers.
All the other chapters are intended to help you when you have a specific query.
If you use the IMPRESSA C9, you will become a master at preparing exciting coffee specialities, you will be a Barista!
You can download the short operating instructions for your machine from the JURA website (www.jura.com).
Symbol description
Warnings
CAUTION
CAUTION
Symbols used
E
@
T
10
Always take note of any information marked with the CAUTION or WARNING symbol. The signal word WARNING points out potential risk of serious injury, and the signal word CAUTION potential risk of slight injury.
The CAUTION symbol is used to draw attention to circumstances which could cause the machine to become damaged.
Information and tips to make things easier for you as you use your IMPRESSA.
References to the online JURA website, where you can find interesting further infor­mation: www.jura.com.
Prompt to take action. This symbol means that you are being prompted to perform some action.
1 IMPRESSA C9
1 IMPRESSA C9
Coffee that fulfils your wildest dreams
The new entry level model in the One Touch Cappuccino league is sure to please all cappucino fans with its simple ‘touch of a button’ function without having to move the cup. In elegant piano black and with a new user interface, the high-quality IMPRESSA C9 is fully in keeping with current trends and exudes an aura of superiority, dura­bility and competence. It impressively demonstrates these attributes with each coffee speciality that you enjoy.
Z One Touch Cappuccino: Your IMPRESSA C9 makes a cup of
cappuccino at the touch of a button, without you having to
move the cup. Hot milk foam, flowing into the cup and slowly
starting to fill it. Steam which rises, awakening the anticipa-
tion of a delicious speciality. Aromatic coffee, blending with
the milk, pushing up the milk foam topping. These are the
protagonists in a sensuous drama – the drama of perfect cof-
fee preparation.
Z Simple operation: With the clearly arranged control elements
and the easy-to-understand text and graphic display, opera-
tion of the IMPRESSA C9 is also simple for beginners. You can
navigate effectively through the individual programme steps
by simply turning and pressing the Rotary Switch. The focus
is on your personal taste. Simply select the coffee strength,
amount of water and temperature according to your individ-
ual preferences.
Z Energy saving mode (Energy Save Mode, E.S.M.
IMPRESSA C9 actively assists you in saving energy. With the
Energy Saving Mode you can adjust the energy saving poten-
tial to suit the way you like to enjoy your beverages.
Z Zero-Energy Switch (On/Off button): When the IMPRESSA is
switched off with the On/Off button, the machine consumes
less than 0.01 W of standby energy.
©
): The
11
1 IMPRESSA C9
Z Height-adjustable coffee spout: The height of the coffee
spout, which can be adjusted within a range of 65 to 111 mm,
can be adapted to all cup sizes on a continuous scale. This pre-
vents coffee splashing on the machine and is your guarantee
for a rich, thick crema.
Connector System©
JURA on the Internet
Knowledge Builder
The Connector System frothers:
Z Professional Cappuccino Frother
U Cappuccino, latte macchiato U Hot milk and milk foam
Z Easy Cappuccino Frother
U Cappuccino U Milk foam
Visit us on the Internet.
@ At www.jura.com you will find interesting and up-to-date
information on your IMPRESSA and on every aspect of cof-
fee.
You can familiarise yourself with your IMPRESSA C9 in a fun way on the PC.
@ The Knowledge Builder awaits you at www.jura.com. The
interactive assistant, LEO, will support you and explain the
benefits of and how to use your IMPRESSA.
©
permits the use of different cappuccino
12
2 Preparing and using for the first time
This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience.
2 Preparing and using your IMPRESSA for the first time
Set up
Filling the water tank
CAUTION
Filling the bean con­tainer
CAUTION
Keep the packaging for your IMPRESSA. It should be used to protect the machine during transportation.
When setting up your IMPRESSA, please note the following:
Z Set the IMPRESSA down on a horizontal surface that is not
sensitive to water.
Z Choose a spot for your IMPRESSA which is protected against
overheating. Ensure that the ventilation slots are not covered.
To enjoy perfect coffee we recommend changing the water every day.
Milk, mineral water or other liquids can damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert.
The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar), pre-ground or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to refill the bean container.
T Open the cover of the bean container and remove the aroma
preservation cover.
T Remove any dirt or foreign objects inside the bean con-
tainer.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
13
2 Preparing and using your IMPRESSA for the first time
First-time use
If the machine is operated with a defective power cable, there is a danger of electric shock.
WARNING
T Never use a machine which has a defective power cable.
Precondition: The water tank and bean container are full.
T Insert the mains plug into a power socket.
Q T Press the On/Off button to switch the IMPRESSA on.
The pre-set language appears on the display.
T Open the cover of the Rotary Switch.
The Rotary Switch lights up.
g T Turn the Rotary Switch until the desired language is dis-
played. For Example:
k T Press the Rotary Switch to confirm the language.
OK appears briefly on the display to confirm the setting. PRESS RINSE, the maintenance button c lights up.
T Close the cover of the Rotary Switch. T Place a receptacle under the frother.
c T Press the maintenance button.
SYSTEM FILLING, the system fills up with water. A
small amount of water flows from the frother. This operation stops automatically, the following appears on the display:
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout.
c T Press the maintenance button.
RINSING, the machine rinses. The operation stops auto-
matically.
READY, your IMPRESSA is ready to use.
LANGUAGE ENGLISH
HEATING.
14
E When a coffee speciality has been prepared for the first time,
it is possible that
the grinder has not yet been completely filled with coffee
beans. In this case prepare another coffee speciality.
FILL BEANS is shown on the display as
2 Preparing and using your IMPRESSA for the first time
Using and activating filter
Your IMPRESSA no longer has to be descaled if you are using CLARIS filter cartridges.
@ You can also try out the ‘Insert filter’ operation online. Visit the
Knowledge Builder at www.jura.com.
E Perform the ‘Insert filter’ operation without interruptions. This
will ensure that your IMPRESSA always produces at its best.
Precondition:
k T Keep the Rotary Switch pressed until
g T Turn the Rotary Switch until k T Press the Rotary Switch to enter the programme item.
READY is displayed.
T Open the cover of the Rotary Switch.
RINSE appears on
the display.
FILTER - is displayed.
NO -
g T Turn the Rotary Switch until YES w is displayed. k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting. INSERT, the maintenance button c lights up.
T Close the cover of the Rotary Switch. T Remove the CLARIS filter cartridge from the Welcome Pack. T Remove the water tank and empty it. T Lift the cartridge holder and insert the filter cartridge into
the water tank, applying slight pressure.
T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert.
T Place a receptacle (at least 500 ml) under the frother.
c T Press the maintenance button.
FILTER RINSING. Water will flow out of the frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Maintenance button c to continue rins-
ing of the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
15
2 Preparing and using your IMPRESSA for the first time
Filter rinsing stops automatically after approx. 500 ml.
HEATING appears on the display, then READY is dis-
played. The filter is now activated.
Determining water hardness and adjusting
E However, if you are using the CLARIS filter cartridge and have
activated it, you will not be able to adjust the water hard-
ness.
The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between 1° dH and 30° dH. This can also be deactivated, which means that the IMPRESSA will not let you know when it has to be descaled.
You can find out what the water hardness is by using the Aquadur® test strip supplied as standard.
T Hold the test strip briefly (for one second) under flowing
water. Shake off the water.
T Wait for about one minute. T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the description on the packaging. You can now adjust the water hardness.
Example: To change the water hardness from
16°dH to
25°dH, proceed as follows:
Precondition:
k T Keep the Rotary Switch pressed until g T Turn the Rotary Switch until k T Press the Rotary Switch to enter the programme item.
READY is displayed.
T Open the cover of the Rotary Switch.
RINSE appears.
HARDNESS is displayed.
16°dH
g T Turn the Rotary Switch until 25°dH is displayed. k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
g T Turn the Rotary Switch until k T Press the Rotary Switch to exit programming mode.
EXIT is displayed.
READY appears on the display.
T Close the cover of the Rotary Switch.
16
2 Preparing and using your IMPRESSA for the first time
Adjusting the grinder
CAUTION
You can adjust the grinder continuously to suit the roast of your coffee.
If you adjust the fineness of grind when the grinder is not operating, the grinding wheel could be damaged.
T Only adjust the fineness of grind when the grinder is run-
ning.
The fineness of grind setting is correct if the coffee flows regularly from the coffee spout. A fine, thick crema is also formed. Our recommendations:
Z Select a fine setting for a light roast.
U If the fineness of grind setting is too fine, the coffee only
drips from the coffee spout.
Z Select a coarse setting for a darker roast.
U If the fineness of grind is too coarse the coffee flows too
quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation, proceed as follows:
T Open the cover of the bean container. T Remove the aroma preservation cover. T Place a cup under the coffee spout.
o T Press the Coffee button.
The grinder starts and the coffee strength is briefly displayed.
T Turn the fineness of grind switch to the desired position
while the grinder is running. The coffee will be prepared and the fineness of grind is adjusted.
T Close the aroma preservation cover and the cover of the
bean container.
1 COFFEE is displayed. After this,
17
Loading...
+ 39 hidden pages