Jura IMPRESSA C9N User Manual

The IMPRESSA C9 Manual

The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German T echnical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

Table of contents

Your IMPRESSA C9

Control elements 4 Proper use For your safety The IMPRESSA C9 Manual

1 IMPRESSA C9 9

2 Preparing and using for the first time 11

3 Familiarising yourself with the control options 17

4 Preparation at the touch of a button 24

5 Permanent settings in programming mode 28

Symbol description .......................................................................................................................................8

Connector System© ....................................................................................................................................10

JURA on the Internet ....................................................................................................................................10

Knowledge Builder .......................................................................................................................................10

Set up ..............................................................................................................................................................11

Filling the water tank ....................................................................................................................................11

Filling the bean container ............................................................................................................................11

First-time use ................................................................................................................................................12

Using and activating filter ..........................................................................................................................13

Determining water hardness and adjusting ............................................................................................14

Adjusting the grinder ..................................................................................................................................15

Switching on .................................................................................................................................................16

Switching off .................................................................................................................................................16

Preparation at the touch of a button ........................................................................................................18

One-off settings before and during preparation ....................................................................................18

Adjusting the default amount of water to suit the cup size .................................................................19

Permanent settings in programming mode ..........................................................................................20

Query information and maintenance status..........................................................................................22

Ristretto, espresso and coffee ...................................................................................................................24

Cappuccino...................................................................................................................................................24

Pre-ground coffee .......................................................................................................................................25

Hot milk and milk foam .............................................................................................................................26

Hot water ......................................................................................................................................................27

Products ........................................................................................................................................................28

Energy saving mode (Energy Save Mode, E.S.M.

)...............................................................................30

Automatic switch-off ..................................................................................................................................30

Restore factory settings ..............................................................................................................................31

Table of contents

Unit amount of water .................................................................................................................................32

Language ......................................................................................................................................................33

6 Maintenance 34

Maintenance tips .........................................................................................................................................34

Rinse machine..............................................................................................................................................34

Filter change .................................................................................................................................................35

Clean machine .............................................................................................................................................36

Descale machine .........................................................................................................................................38

Rinsing the Cappuccino Frother ...............................................................................................................40

Cleaning the Cappuccino Frother..............................................................................................................41

Disassembling and rinsing the Easy Cappuccino Frother....................................................................42

Disassembling and rinsing the Professional Cappuccino Frother ......................................................42

Cleaning the bean container .....................................................................................................................43

Descaling the water tank ...........................................................................................................................43

7 Display messages 44 8 Troubleshooting 9 Transport and environmentally neutral disposal

Transport / Empty system .........................................................................................................................47

Disposal .........................................................................................................................................................47

10 Technical data 48 Index

JURA contact details / Legal information

Control elements

2 3

12 13

Figure: IMPRESSA C9 Piano Black

1 Cover of filler funnel for pre-ground coffee 2 Filler funnel for pre-ground coffee 3 Water tank cover 4 Water tank 5 Power cable (side of machine) 6 Coffee grounds container 7 Drip tray

8 Q On/off button 9 Fineness of grind switch 10 Bean container cover 11 Bean container

with aroma preservation cover

12 Connector System

for removable frothers 13 Easy Cappuccino Frother 14 Height-adjustable coffee spout 15 Cup platform

Control elements

2 3

Front left:

1 Plain text display

u Ristretto button i Espresso button o Coffee button c Maintenance button v Pre-ground coffee button

Front right:

p Cappuccino button ü Milk foam button m Hot water button

4 Easy Cappuccino Frother 5 Professional Cappuccino Frother

6 Hot water nozzle 2 Rotary Switch cover 3 Rotary Switch

The Connector System© permits the use of different frothers. These are available from stockists.

Important information

Proper use

The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

Before using the machine always carefully read and comply with all these instructions. Keep this manual close to the IMPRESSA and, if appropriate, pass it on to the next user.

For your safety

Please read and note carefully the following important safety information. By doing this, you can avoid the life-threatening danger of electric shock:

Z Never use a machine which has been damaged or with a

defective power cable.

Z For information on what to do in case of damage, for example

if there is a smell of burning, unplug the machine immedi ately from the mains supply and contact the JURA service centre.

Z If the power cable for this machine is damaged, it must be

repaired either directly by JURA or by a JURA approved service centre.

Z Make sure that the IMPRESSA and the power cable are not

located close to hot surfaces.

Z Be careful to ensure that the power cable does not get caught

and does not rub against sharp edges.

Z Never open and repair the machine yourself. Do not modify

the machine in any way that is not described in the IMPRESS A Manual. The machine contains live parts. If opened, there is a danger of serious injury. Repairs may only be carried out by JURA approved service centres, using original spare parts and accessories.

There is a risk of scalds or burns on the spouts or on the nozzle:

Z Place the machine out of the reach of children. Z Do not touch any hot parts. Use the handles provided. Z Be careful to ensure that the appropriate nozzle is installed

and clean. The nozzle or parts of the nozzle might come off if the parts are not assembled correctly or a blockage occurs.

Important information

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

Z Never allow the power cable to loo sely hang down. The pow er

cable can be tripped over or damaged.

Z Protect your IMPRESSA from environmental influences such

as rain, frost and direct sunlight.

Z Do not put the IMPRESSA, cable or connections in water. Z Do not put the IMPRESSA or any individual parts in the dish-

washer.

Z Switch your IMPRESSA off with the On/Off button before

cleaning it. Always wipe your IMPRESSA with a damp cloth

rather than a wet one, and protect it from prolonged water

splash.

Z Only connect the machine to a power supply in accordance

with the information on the rating plate. The rating plate is

located on the underside of your IMPRESSA. Further technical

data is given in Chapter 10 ‘Technical Data’.

Z Use only original JURA care products. Use of accessories that

are not explicitly recommended by JURA could damage the

IMPRESSA.

Z Do not use any coffee beans treated with additives or caramel-

ised coffee beans.

Z Always fill the water tank with cold, fresh mains water. Z If you are absent for a prolonged period of time, turn the

machine off.

Risk to children and persons with limited capabilities in operating machines:

Z The machine is not designed to be operated by children and

persons with limited capabilities.

Z The machine may only be used by persons who are able to

operate the machine safely.

Safe handling of the CLARIS filter cartridges:

Z Filter cartridges should be kept out of the reach of children. Z Store them dry in the sealed package. Z Protect them from heat and direct sunlight. Z Do NOT use damaged filter cartridges. Z Do NOT open filter cartridges.

The IMPRESSA C9 Manual

You are holding the manual for yo ur IMPRESSA C9 in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers.

Chapter 2, ‘Preparing and using your IMPRESSA for the first time’, explains step-by-step how to set up and prepare the IMPRESSA.

Chapter 3, ‘Familiarising yourself with the control options’ is important for you to read as you are familiarising yourself with your IMPRESSA. It invites you to actively explore all the different coffee experiences that it offers.

All the other chapters are intended to help you when you have a specific query.

If you use the IMPRESSA C9, you will become a mast er at preparing exciting coffee specialities, you will be a Barista!

You can download the short operating instructions for y our machine from the JURA website (www.jura.com).

Symbol description

Warnings

CAUTION CAUTION

Symbols used

Always take note of any inf ormation marked with the CAUTION or W ARNING symbol. The signal word WARNING points out potential risk of serious injury, and the signal word CAUTION potential risk of slight injury.

The CAUTION symbol is used to draw attention to circumstances whic h c ould cause the machine to become damaged.

Information and tips to make things easier for you as you use your IMPRESSA. References to the online JURA website, where you can find interesting further infor-

mation: www.jura.com. Prompt to take action. This symbol means that you are being prompted to perform

some action.

1 IMPRESSA C9

Coffee that fulfils your wildest dreams

The new entry level model in the One Touch Cappuccino league is sure to please all cappucino fans with its simple ‘touch of a button’ function without having to move the cup. In elegant piano black and with a new user interface, the high-quality IMPRESSA C9 is fully in keeping with current trends and exudes an aura of superiority, dur ability and competence. It impressively demonstrates these attribut es with each coffee speciality that you enjoy.

Z One Touch Cappuccino: Your IMPRESSA C9 makes a cup of

cappuccino at the touch of a button, without you having to

move the cup. Hot milk foam, flowing int o the cup and slowly

starting to fill it. Steam which rises, awakening the anticipa-

tion of a delicious speciality. Aromatic coffee, blending with

the milk, pushing up the milk foam topping. These are the

protagonists in a sensuous drama – the drama of perfect cof-

fee preparation.

Z Simple operation: With the clearly arranged control elements

and the easy-to-understand text and graphic display, opera-

tion of the IMPRESSA C9 is also simple for beginners. Y ou can

navigate effectively through the individual programme steps

by simply turning and pressing the Rotary Switch. The focus

is on your personal taste. Simply select the coffee strength,

amount of water and temperature according to yo ur individ-

ual preferences.

Z Energy saving mode (Energy Save Mode, E.S.M.© ): The

IMPRESSA C9 actively assists you in saving energy. With the

Energy Saving Mode you can adjust the energy saving poten-

tial to suit the way you like to enjoy your beverages.

Z Zero-Energy Switch (On/Off button): When the IMPRESSA is

switched off with the On/Off button, the machine consumes

less than 0.01 W of standby energy.

1 IMPRESSA C9

Z Height-adjustable coffee spout: The height of the coffee

spout, which can be adjusted within a range of 65 to 111 mm, can be adapted to all cup sizes on a continuous scale. This prevents coffee splashing on the machine and is your guarantee for a rich, thick crema.

Connector System©

JURA on the Internet

Knowledge Builder

The Connector System frothers:

Z Professional Cappuccino Frother

U Cappuccino, latte macchiato U Hot milk and milk foam

Z Easy Cappuccino Frother

U Cappuccino U Milk foam

Visit us on the Internet.

@ At www.jura.com you will find interesting and up-to-date

information on your IMPRESSA and on every aspect of coffee.

You can familiarise y ourself with y our IMPRES S A C9 in a fun way on the PC.

@ The Knowledge Builder awaits you at www.jura.com. The

interactive assistant, LEO, will support you and explain the benefits of and how to use your IMPRESSA.

permits the use of different cappuccino

2 Preparing and using for the first time

This chapter provides you with the information y ou need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience.

2 Preparing and using your IMPRESSA for the first time

Set up

Filling the water tank

CAUTION

Filling the bean container

CAUTION

Keep the packaging for your IMPRES SA. It should be used to protect the machine during transportation.

When setting up your IMPRESSA, please note the following:

Z Set the IMPRESSA down on a horizontal surface that is not

sensitive to water.

Z Choose a spot for your IMPRESSA which is protected against

overheating. Ensure that the ventilation slots are not covered.

To enjoy perfect coffee we recommend changing the water every day.

Milk, mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert.

The bean container has an aroma preservation cover . This will ensure that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar), pre-ground or freeze-dried coffee will damage the grinder.

T Only use untreated coffee beans to refill the bean container.

T Open the cover of the bean container and remove the aroma

preservation cover.

T Remove any dirt or foreign objects inside the bean con-

tainer.

T Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

2 Preparing and using your IMPRESSA for the first time

First-time use

If the machine is operated with a defective power cable, there is a danger of electric shock.

WARNING

T Never use a machine which has a defective power cable.

Precondition: The water tank and bean container are full.

T Insert the mains plug into a power socket.

Q T Press the On/Off button to switch the IMPRESSA on.

The pre-set language appears on the display.

T Open the cover of the Rotary Switch.

The Rotary Switch lights up.

g T Turn the Rotary Switch until the desired language is dis-

played. For Example:

k T Press the Rotary Switch to confirm the language.

OK appears briefly on the display to confirm the setting. PRESS RINSE, the maintenance button c lights up.

T Close the cover of the Rotary Switch. T Place a receptacle under the frother.

c T Press the maintenance button.

SYSTEM FILLING, the system fills up with water. A

small amount of water flows from the frother. This operation stops automatically , the following appears on the display:

PRESS RINSE, the maintenance button c lights up.

T Place a receptacle under the coffee spout.

c T Press the maintenance button.

RINSING, the machine rinses. The operation stops auto-

matically.

READY, your IMPRESSA is ready to use.

LANGUAGE ENGLISH

HEATING.

E When a coffee speciality has been prepared for the first time,

it is possible that the grinder has not yet been completely filled with coffee beans. In this case prepare another coffee speciality.

FILL BEANS is shown on the display as

2 Preparing and using your IMPRESSA for the first time

Using and activating filter

Your IMPRES SA no longer has to be descaled if you are using CLARIS filter cartridges.

@ Y ou can also try out the ‘Insert filter’ operation online. Visit the

Knowledge Builder at www.jura.com.

E P erform the ‘Insert filter’ operation without interruptions. This

will ensure that your IMPRESSA always produces at its best.

Precondition:

k T Keep the Rotary Switch pressed until

g T Turn the Rotary Switch until k T Press the Rotary Switch to enter the programme item.

READY is displayed.

T Open the cover of the Rotary Switch.

RINSE appears on

the display.

FILTER - is displayed.

NO -

g T Turn the Rotary Switch until YES w is displayed. k T Press the Rotary Switch to confirm the setting.

OK appears briefly on the display to confirm the setting. INSERT, the maintenance button c lights up.

T Close the cover of the Rotary Switch. T Remove the CLARIS filter cartridge from the Welcome Pack. T Remove the water tank and empty it. T Lif t the cartridge holder and insert the filter cartridge into

the water tank, applying slight pressure. T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert.

T Place a receptacle (at least 500 ml) under the frother.

c T Press the maintenance button.

FILTER RINSING. Water will flow out of the frother.

E You can interrupt rinsing of the filter at any time by pressing

any button. Press the Maintenance button c to continue rinsing of the filter.

E The water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

2 Preparing and using your IMPRESSA for the first time

Filter rinsing stops automatically after approx. 500 ml.

HEATING appears on the display, then READY is dis-

played. The filter is now activated.

Determining water hardness and adjusting

E Ho wever, if you are using the CLARIS filter cartridge and have

activated it, you will not be able to adjust the water hardness.

The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to adjust the water hardness.

The water hardness can be adjusted on a continuous scale between 1° dH and 30° dH. This can also be deactivated, which means that the IMPRESSA will not let you know when it has to be descaled.

You can find out what the w at er hardness is by using the Aquadur® test strip supplied as standard.

T Hold the test strip briefly (for one second) under flowing

water. Shake off the water. T Wait for about one minute. T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the

description on the packaging.

You can now adjust the water hardness.

Example: To change the water hardness from

16°dH to

25°dH, proceed as follows:

Precondition:

k T Keep the Rotary Switch pressed until g T Turn the Rotary Switch until k T Press the Rotary Switch to enter the programme item.

READY is displayed.

T Open the cover of the Rotary Switch.

RINSE appears.

HARDNESS is displayed.

16°dH

g T Turn the Rotary Switch until 25°dH is displayed. k T Press the Rotary Switch to confirm the setting.

OK appears briefly on the display to confirm the setting.

g T Turn the Rotary Switch until k T Press the Rotary Switch to exit programming mode.

EXIT is displayed.

READY appears on the display.

T Close the cover of the Rotary Switch.

2 Preparing and using your IMPRESSA for the first time

Adjusting the grinder

CAUTION

You can adjust the grinder continuously to suit the roast of your coffee.

If you adjust the fineness of grind when the grinder is not operating, the grinding wheel could be damaged.

T Only adjust the fineness of grind when the grinder is run -

ning.

The fineness of grind setting is correct if the coffee flows regularly from the coffee spout. A fine, thick crema is also formed. Our recommendations:

Z Select a fine setting for a light roast.

U If the fineness of grind setting is too fine, the coffee only

drips from the coffee spout.

Z Select a coarse setting for a darker roast.

U If the fineness of grind is too coarse the coffee flows too

quickly from the coffee spout.

Example: T o change the fineness of grind during coffee preparation, proceed as follows:

T Open the cover of the bean container. T Remove the aroma preservation cover. T Place a cup under the coffee spout.

o T Press the Coffee button.

The grinder starts and the coffee strength is briefly displayed.

T Turn the fineness of grind switch to the desired position

while the grinder is running. The coffee will be prepared and the fineness of grind is adjusted.

T Close the aroma preservation cover and the cover of the

bean container.

1 COFFEE is displayed. After this,

2 Preparing and using your IMPRESSA for the first time

Switching on

Switching off

Q T Press the On/Off button to switch the IMPRESSA on.

HEATING is displayed.

PRESS RINSE, the maintenance button c lights up.

T Place a receptacle under the coffee spout.

c T Press the maintenance button.

RINSING, the machine rinses.

Preparation stops automatically.

display.

When you switch your IMPRESS A off, the spouts with which a coffee speciality or milk have been prepared are rinsed.

T Place a receptacle under the coffee spout and the frother.

Q T Press the On/Off button.

READY appears on the

RINSING, the spouts used to prepare a speciality coffee

or milk are rinsed. The operation stops automatically and

your IMPRESSA is switched off.

E When your IMPRESSA is switched off, a hissing noise may be

audible. This is normal and does not have any effect on the machine.

+ 36 hidden pages